From: Gaetan Rivet <gaetan.rivet@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 09/12] net/failsafe: support flow API
Date: Fri, 3 Mar 2017 16:40:31 +0100 [thread overview]
Message-ID: <b8465eed72711a90ee690fed8a9c157bac417a3e.1488550982.git.gaetan.rivet@6wind.com> (raw)
In-Reply-To: <cover.1488550982.git.gaetan.rivet@6wind.com>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 2 +
drivers/net/failsafe/failsafe_ether.c | 76 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 230 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 ++++
drivers/net/failsafe/failsafe_private.h | 20 +++
7 files changed, 359 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index 38acf3c..92519ac 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -41,6 +41,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_FAILSAFE_PMD) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_FAILSAFE_PMD) += failsafe_ether.c
SRCS-$(CONFIG_RTE_LIBRTE_FAILSAFE_PMD) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_FAILSAFE_PMD) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_FAILSAFE_PMD) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 36d266f..fbe8f55 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -161,6 +161,7 @@ eth_dev_create(const char *name,
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index a5e8c3c..9817fc9 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -139,6 +139,7 @@ dev_init(struct rte_eth_dev *dev)
continue;
}
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ SUB_ID(sdev) = i;
sdev->state = DEV_PROBED;
}
}
@@ -189,6 +190,7 @@ pci_probe(struct rte_eth_dev *dev)
continue;
}
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ SUB_ID(sdev) = i;
sdev->state = DEV_PROBED;
}
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2d90bcb..439e02c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,42 @@ eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+#ifndef NDEBUG
+ memset(&ferror, 0x11, sizeof(ferror));
+#endif
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+#ifndef NDEBUG
+ memset(&ferror, 0x11, sizeof(ferror));
+#endif
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..3079786
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,230 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static void *
+fs_calloc(size_t n, size_t sz)
+{
+ size_t size;
+
+ size = n * sz;
+ if (n != 0 && size / n != sz) {
+ ERROR("size_t overflow");
+ return NULL;
+ }
+ return rte_zmalloc(NULL, size,
+ RTE_CACHE_LINE_SIZE);
+}
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+
+ flow = rte_zmalloc(NULL, sizeof(struct rte_flow),
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = rte_flow_copy(attr, items, actions, fs_calloc);
+ if (flow->fd == NULL) {
+ ERROR("Could not allocate flow description");
+ goto free_flow;
+ }
+ return flow;
+free_flow:
+ rte_free(flow);
+
+ return NULL;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free((*flow)->fd);
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ rte_free(flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index e96b43c..57de33f 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -35,6 +35,7 @@
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -641,6 +642,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -668,4 +696,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index c1aa24d..d20f9b6 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_pci.h>
#include <rte_ethdev.h>
@@ -73,6 +75,16 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -92,6 +104,7 @@ struct sub_device {
};
struct rte_eth_dev *eth_dev;
struct rte_eth_dev_data data;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
@@ -111,6 +124,8 @@ struct fs_priv {
uint8_t subs_tx;
struct sub_device *subs;
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -158,6 +173,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t plug_in_poll;
extern int mac_from_arg;
@@ -175,6 +191,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ (sdev->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
next prev parent reply other threads:[~2017-03-03 15:40 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 15:40 [dpdk-dev] [PATCH 00/12] introduce fail-safe PMD Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 01/12] ethdev: save VLAN filter setting Gaetan Rivet
2017-03-03 17:33 ` Stephen Hemminger
2017-03-03 15:40 ` [dpdk-dev] [PATCH 02/12] ethdev: add flow API rule copy function Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 03/12] ethdev: add deferred intermediate device state Gaetan Rivet
2017-03-03 17:34 ` Stephen Hemminger
2017-03-03 15:40 ` [dpdk-dev] [PATCH 04/12] pci: expose device detach routine Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 05/12] pci: expose parse and probe routines Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 06/12] net/failsafe: add fail-safe PMD Gaetan Rivet
2017-03-03 17:38 ` Stephen Hemminger
2017-03-06 14:19 ` Gaëtan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 07/12] net/failsafe: add plug-in support Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 08/12] net/failsafe: add flexible device definition Gaetan Rivet
2017-03-03 15:40 ` Gaetan Rivet [this message]
2017-03-03 15:40 ` [dpdk-dev] [PATCH 10/12] net/failsafe: support offload capabilities Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 11/12] net/failsafe: add fast burst functions Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 12/12] net/failsafe: support device removal Gaetan Rivet
2017-03-03 16:14 ` [dpdk-dev] [PATCH 00/12] introduce fail-safe PMD Bruce Richardson
2017-03-06 13:53 ` Gaëtan Rivet
2017-03-03 17:27 ` Stephen Hemminger
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 00/13] " Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 01/13] ethdev: save VLAN filter setting Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 02/13] ethdev: add flow API rule copy function Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 03/13] ethdev: add deferred intermediate device state Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 04/13] pci: expose device detach routine Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 05/13] pci: expose parse and probe routines Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 06/13] net/failsafe: add fail-safe PMD Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 07/13] net/failsafe: add plug-in support Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 08/13] net/failsafe: add flexible device definition Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 09/13] net/failsafe: support flow API Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 10/13] net/failsafe: support offload capabilities Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 11/13] net/failsafe: add fast burst functions Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 12/13] net/failsafe: support device removal Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 13/13] net/failsafe: support link status change event Gaetan Rivet
2017-03-08 16:54 ` [dpdk-dev] [PATCH v2 00/13] introduce fail-safe PMD Neil Horman
2017-03-09 9:15 ` Bruce Richardson
2017-03-10 9:13 ` Gaëtan Rivet
2017-03-10 22:43 ` Neil Horman
2017-03-14 14:49 ` Gaëtan Rivet
2017-03-15 3:28 ` Bruce Richardson
2017-03-15 11:15 ` Thomas Monjalon
2017-03-15 14:25 ` Gaëtan Rivet
2017-03-16 20:50 ` Neil Horman
2017-03-17 10:56 ` Gaëtan Rivet
2017-03-18 19:51 ` Neil Horman
2017-03-20 15:00 ` Thomas Monjalon
2017-05-17 12:50 ` Ferruh Yigit
2017-05-17 16:59 ` Gaëtan Rivet
2017-03-23 13:01 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8465eed72711a90ee690fed8a9c157bac417a3e.1488550982.git.gaetan.rivet@6wind.com \
--to=gaetan.rivet@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).