[DPDK/ethdev Bug 1750] ixgbe: X553 link remains down (NO-CARRIER)

[DPDK/ethdev Bug 1750] ixgbe: X553 link remains down (NO-CARRIER)

[bugzilla]

[-- Attachment #1: Type: text/plain, Size: 2141 bytes --]

https://bugs.dpdk.org/show_bug.cgi?id=1750

            Bug ID: 1750
           Summary: ixgbe: X553 link remains down (NO-CARRIER)
           Product: DPDK
           Version: 24.11
          Hardware: x86
                OS: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: Normal
         Component: ethdev
          Assignee: dev@dpdk.org
          Reporter: clinton@netgate.com
  Target Milestone: ---

Ethernet Connection X553 10 GbE SFP+ link can get stuck in a DOWN/NO-CARRIER
state when starting an application (testpmd or VPP).

The interface remains in a DOWN/NO-CARRIER state, even when unbinding the NIC
from vfio-pci followed by binding to the ixgbe kernel driver. The only way I've
been able to bring the interface back up is by rebooting the system.

I've tested with multiple systems, SFP+ modules, switches, etc...

I initially ran into this when running CSIT tests against VPP. After some time,
failures would start occurring because of the link issue. I found that
starting/stopping VPP multiple times eventually resulted in the interface state
getting stuck down.

I replicated this with testpmd as well. 

Steps to Reproduce:
1. Bind X553 interfaces to vfio-pci driver
2. Compile testpmd application if not already compiled
3. Create a file (ie: testpmd-flap.txt) with the following contents:
port stop all
set link-up port 0
set link-up port 1
port reset all
port start all

4. Create a script to rerun the dpdk-testpmd application
while true; do
        echo | ./dpdk-testpmd -a 0000:03:00.0 -a 0000:03:00.1 -l 1-4 --
--disable-link-check --disable-device-start --cmdline=testpmd-flap.txt
        sleep .5
done

5. Run the script. The time it takes to fail can vary...sometimes it only takes
a minute or so and other times it can take 30+ minutes. You'll need to stop the
script to check the port state (testpmd> show port info all).

I'm using two interfaces and generally when this happens only one of the two
interfaces shows in the down state.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #2: Type: text/html, Size: 4014 bytes --]