* [dpdk-dev] [Bug 537] FM1000 "PMD: eth_fm10k_dev_init(): switch is not ready" error
@ 2020-09-17 11:01 bugzilla
0 siblings, 0 replies; only message in thread
From: bugzilla @ 2020-09-17 11:01 UTC (permalink / raw)
Bug ID: 537
Summary: FM1000 "PMD: eth_fm10k_dev_init(): switch is not
Target Milestone: ---
I am trying to run dpdk process on an fm10k NIC. I have configured dpdk to use
fm10k driver，and the NIC is successfully recognized.
I have bound the fm10k interface to use igb_uio driver and tried to run l2fwd
I use the following command to run l2fwd:
./l2fwd -w 0000:05:00.0,enable_ftag=1 -w 0000:83:00.0,enable_ftag=1 -- -p 0x3
And sometimes the l2fwd gave me the following errors:
"PMD: eth_fm10k_dev_init(): switch is not ready"
I tried to add sleep and retry but it failed!
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-09-17 11:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-17 11:01 [dpdk-dev] [Bug 537] FM1000 "PMD: eth_fm10k_dev_init(): switch is not ready" error bugzilla
DPDK patches and discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
Example config snippet for mirrors.
Newsgroup available over NNTP:
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git