* [dpdk-dev] [Bug 555] Flow API issues with testpmd discovered during the creation of the rte flow test suite
@ 2020-10-14 21:46 bugzilla
0 siblings, 0 replies; only message in thread
From: bugzilla @ 2020-10-14 21:46 UTC (permalink / raw)
Bug ID: 555
Summary: Flow API issues with testpmd discovered during the
creation of the rte flow test suite
Target Milestone: ---
Created attachment 125
The log from the test suite as well as a list of failed tests and what caused
them to fail.
While working on the rte flow test case, I found that there are quite a few
places where "flow validate" will pass for a statement, only for "flow create"
to fail. I also found a few places where rules do not seem to applying their
actions to a matching packet, or were applying actions to non-matching packets.
All of the flow syntax is based off of the rte flow programmer's guide.
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-10-14 21:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-14 21:46 [dpdk-dev] [Bug 555] Flow API issues with testpmd discovered during the creation of the rte flow test suite bugzilla
DPDK patches and discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
Example config snippet for mirrors.
Newsgroup available over NNTP:
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git