From: Shijith Thotton <sthotton@marvell.com>
To: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Cc: Shijith Thotton <sthotton@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>,
Jerin Jacob <jerinj@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 2/3] test/event: add unit tests for periodic timer
Date: Sun, 14 Mar 2021 22:15:57 +0530 [thread overview]
Message-ID: <c006e106bad755e1a87bb411d9e2127a59b3f968.1615738894.git.sthotton@marvell.com> (raw)
In-Reply-To: <cover.1615738894.git.sthotton@marvell.com>
Add tests to arm and cancel periodic timer.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
---
app/test/test_event_timer_adapter.c | 136 +++++++++++++++++++++++++---
1 file changed, 123 insertions(+), 13 deletions(-)
diff --git a/app/test/test_event_timer_adapter.c b/app/test/test_event_timer_adapter.c
index b536ddef4..20be46da3 100644
--- a/app/test/test_event_timer_adapter.c
+++ b/app/test/test_event_timer_adapter.c
@@ -283,7 +283,7 @@ test_port_conf_cb(uint16_t id, uint8_t event_dev_id, uint8_t *event_port_id,
}
static int
-_timdev_setup(uint64_t max_tmo_ns, uint64_t bkt_tck_ns)
+_timdev_setup(uint64_t max_tmo_ns, uint64_t bkt_tck_ns, uint64_t flags)
{
struct rte_event_timer_adapter_info info;
struct rte_event_timer_adapter_conf config = {
@@ -292,7 +292,7 @@ _timdev_setup(uint64_t max_tmo_ns, uint64_t bkt_tck_ns)
.timer_tick_ns = bkt_tck_ns,
.max_tmo_ns = max_tmo_ns,
.nb_timers = MAX_TIMERS * 10,
- .flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES,
+ .flags = flags,
};
uint32_t caps = 0;
const char *pool_name = "timdev_test_pool";
@@ -301,6 +301,13 @@ _timdev_setup(uint64_t max_tmo_ns, uint64_t bkt_tck_ns)
TEST_ASSERT_SUCCESS(rte_event_timer_adapter_caps_get(evdev, &caps),
"failed to get adapter capabilities");
+
+ if (flags & RTE_EVENT_TIMER_ADAPTER_F_PERIODIC &&
+ !(caps & RTE_EVENT_TIMER_ADAPTER_CAP_PERIODIC)) {
+ printf("Adapter does not support periodic timers\n");
+ return TEST_SKIPPED;
+ }
+
if (!(caps & RTE_EVENT_TIMER_ADAPTER_CAP_INTERNAL_PORT)) {
timdev = rte_event_timer_adapter_create_ext(&config,
test_port_conf_cb,
@@ -338,42 +345,72 @@ _timdev_setup(uint64_t max_tmo_ns, uint64_t bkt_tck_ns)
static int
timdev_setup_usec(void)
{
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES;
+
return using_services ?
/* Max timeout is 10,000us and bucket interval is 100us */
- _timdev_setup(1E7, 1E5) :
+ _timdev_setup(1E7, 1E5, flags) :
/* Max timeout is 100us and bucket interval is 1us */
- _timdev_setup(1E5, 1E3);
+ _timdev_setup(1E5, 1E3, flags);
}
static int
timdev_setup_usec_multicore(void)
{
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES;
+
return using_services ?
/* Max timeout is 10,000us and bucket interval is 100us */
- _timdev_setup(1E7, 1E5) :
+ _timdev_setup(1E7, 1E5, flags) :
/* Max timeout is 100us and bucket interval is 1us */
- _timdev_setup(1E5, 1E3);
+ _timdev_setup(1E5, 1E3, flags);
}
static int
timdev_setup_msec(void)
{
- /* Max timeout is 2 mins, and bucket interval is 100 ms */
- return _timdev_setup(180 * NSECPERSEC, NSECPERSEC / 10);
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES;
+
+ /* Max timeout is 3 mins, and bucket interval is 100 ms */
+ return _timdev_setup(180 * NSECPERSEC, NSECPERSEC / 10, flags);
+}
+
+static int
+timdev_setup_msec_periodic(void)
+{
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES |
+ RTE_EVENT_TIMER_ADAPTER_F_PERIODIC;
+
+ /* Periodic mode with 100 ms resolution */
+ return _timdev_setup(0, NSECPERSEC / 10, flags);
}
static int
timdev_setup_sec(void)
{
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES;
+
/* Max timeout is 100sec and bucket interval is 1sec */
- return _timdev_setup(1E11, 1E9);
+ return _timdev_setup(1E11, 1E9, flags);
+}
+
+static int
+timdev_setup_sec_periodic(void)
+{
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES |
+ RTE_EVENT_TIMER_ADAPTER_F_PERIODIC;
+
+ /* Periodic mode with 1 sec resolution */
+ return _timdev_setup(0, NSECPERSEC, flags);
}
static int
timdev_setup_sec_multicore(void)
{
+ uint64_t flags = RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES;
+
/* Max timeout is 100sec and bucket interval is 1sec */
- return _timdev_setup(1E11, 1E9);
+ return _timdev_setup(1E11, 1E9, flags);
}
static void
@@ -513,6 +550,18 @@ test_timer_arm(void)
return TEST_SUCCESS;
}
+static inline int
+test_timer_arm_periodic(void)
+{
+ TEST_ASSERT_SUCCESS(_arm_timers(1, MAX_TIMERS),
+ "Failed to arm timers");
+ /* With a resolution of 100ms and wait time of 1sec,
+ * there will be 10 * MAX_TIMERS periodic timer triggers */
+ TEST_ASSERT_SUCCESS(_wait_timer_triggers(1, 10 * MAX_TIMERS, 0),
+ "Timer triggered count doesn't match arm count");
+ return TEST_SUCCESS;
+}
+
static int
_arm_wrapper(void *arg)
{
@@ -588,6 +637,19 @@ test_timer_arm_burst(void)
return TEST_SUCCESS;
}
+static inline int
+test_timer_arm_burst_periodic(void)
+{
+ TEST_ASSERT_SUCCESS(_arm_timers_burst(1, MAX_TIMERS),
+ "Failed to arm timers");
+ /* With a resolution of 100ms and wait time of 1sec,
+ * there will be 10 * MAX_TIMERS periodic timer triggers */
+ TEST_ASSERT_SUCCESS(_wait_timer_triggers(1, 10 * MAX_TIMERS, 0),
+ "Timer triggered count doesn't match arm count");
+
+ return TEST_SUCCESS;
+}
+
static int
_arm_wrapper_burst(void *arg)
{
@@ -612,6 +674,48 @@ test_timer_arm_burst_multicore(void)
return TEST_SUCCESS;
}
+static inline int
+test_timer_cancel_periodic(void)
+{
+ uint64_t i;
+ struct rte_event_timer *ev_tim;
+ const struct rte_event_timer tim = {
+ .ev.op = RTE_EVENT_OP_NEW,
+ .ev.queue_id = 0,
+ .ev.sched_type = RTE_SCHED_TYPE_ATOMIC,
+ .ev.priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+ .ev.event_type = RTE_EVENT_TYPE_TIMER,
+ .state = RTE_EVENT_TIMER_NOT_ARMED,
+ .timeout_ticks = CALC_TICKS(1),
+ };
+
+ for (i = 0; i < MAX_TIMERS; i++) {
+ TEST_ASSERT_SUCCESS(rte_mempool_get(eventdev_test_mempool,
+ (void **)&ev_tim),
+ "mempool alloc failed");
+ *ev_tim = tim;
+ ev_tim->ev.event_ptr = ev_tim;
+
+ TEST_ASSERT_EQUAL(rte_event_timer_arm_burst(timdev, &ev_tim,
+ 1), 1, "Failed to arm timer %d",
+ rte_errno);
+
+ rte_delay_us(100 + (i % 5000));
+
+ TEST_ASSERT_EQUAL(rte_event_timer_cancel_burst(timdev,
+ &ev_tim, 1), 1,
+ "Failed to cancel event timer %d", rte_errno);
+ rte_mempool_put(eventdev_test_mempool, ev_tim);
+ }
+
+
+ TEST_ASSERT_SUCCESS(_wait_timer_triggers(30, MAX_TIMERS,
+ MAX_TIMERS),
+ "Timer triggered count doesn't match arm, cancel count");
+
+ return TEST_SUCCESS;
+}
+
static inline int
test_timer_cancel(void)
{
@@ -1028,9 +1132,9 @@ adapter_lookup(void)
static int
adapter_start(void)
{
- TEST_ASSERT_SUCCESS(_timdev_setup(180 * NSECPERSEC,
- NSECPERSEC / 10),
- "Failed to start adapter");
+ TEST_ASSERT_SUCCESS(_timdev_setup(180 * NSECPERSEC, NSECPERSEC / 10,
+ RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES),
+ "Failed to start adapter");
TEST_ASSERT_EQUAL(rte_event_timer_adapter_start(timdev), -EALREADY,
"Timer adapter started without call to stop.");
@@ -1786,10 +1890,16 @@ static struct unit_test_suite event_timer_adptr_functional_testsuite = {
test_timer_state),
TEST_CASE_ST(timdev_setup_usec, timdev_teardown,
test_timer_arm),
+ TEST_CASE_ST(timdev_setup_msec_periodic, timdev_teardown,
+ test_timer_arm_periodic),
TEST_CASE_ST(timdev_setup_usec, timdev_teardown,
test_timer_arm_burst),
+ TEST_CASE_ST(timdev_setup_msec_periodic, timdev_teardown,
+ test_timer_arm_burst_periodic),
TEST_CASE_ST(timdev_setup_sec, timdev_teardown,
test_timer_cancel),
+ TEST_CASE_ST(timdev_setup_sec_periodic, timdev_teardown,
+ test_timer_cancel_periodic),
TEST_CASE_ST(timdev_setup_sec, timdev_teardown,
test_timer_cancel_random),
TEST_CASE_ST(timdev_setup_usec_multicore, timdev_teardown,
--
2.25.1
next prev parent reply other threads:[~2021-03-14 16:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-08 20:45 [dpdk-dev] [PATCH 0/3] periodic mode for event timer adapter Shijith Thotton
2021-03-08 20:45 ` [dpdk-dev] [PATCH 1/3] eventdev: introduce adapter flags for periodic mode Shijith Thotton
2021-03-09 20:04 ` Carrillo, Erik G
2021-03-10 9:14 ` Shijith Thotton
2021-03-11 20:47 ` Carrillo, Erik G
2021-03-12 15:30 ` Carrillo, Erik G
2021-03-14 16:49 ` Shijith Thotton
2021-03-08 20:45 ` [dpdk-dev] [PATCH 2/3] test/event: add unit tests for periodic timer Shijith Thotton
2021-03-08 20:45 ` [dpdk-dev] [PATCH 3/3] event/octeontx2: add timer periodic mode support Shijith Thotton
2021-03-14 16:45 ` [dpdk-dev] [PATCH v2 0/3] periodic mode for event timer adapter Shijith Thotton
2021-03-14 16:45 ` [dpdk-dev] [PATCH v2 1/3] eventdev: introduce adapter flags for periodic mode Shijith Thotton
2021-03-16 19:04 ` Carrillo, Erik G
2021-03-17 6:10 ` Shijith Thotton
2021-03-14 16:45 ` Shijith Thotton [this message]
2021-03-14 16:45 ` [dpdk-dev] [PATCH v2 3/3] event/octeontx2: add timer periodic mode support Shijith Thotton
2021-03-17 8:04 ` [dpdk-dev] [PATCH v3 0/3] periodic mode for event timer adapter Shijith Thotton
2021-03-17 8:04 ` [dpdk-dev] [PATCH v3 1/3] eventdev: introduce adapter flags for periodic mode Shijith Thotton
2021-03-17 18:07 ` Carrillo, Erik G
2021-03-22 9:50 ` Jerin Jacob
2021-03-17 8:04 ` [dpdk-dev] [PATCH v3 2/3] test/event: add unit tests for periodic timer Shijith Thotton
2021-03-17 18:11 ` Carrillo, Erik G
2021-03-17 8:04 ` [dpdk-dev] [PATCH v3 3/3] event/octeontx2: add timer periodic mode support Shijith Thotton
2021-03-21 14:43 ` Pavan Nikhilesh Bhagavatula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c006e106bad755e1a87bb411d9e2127a59b3f968.1615738894.git.sthotton@marvell.com \
--to=sthotton@marvell.com \
--cc=dev@dpdk.org \
--cc=erik.g.carrillo@intel.com \
--cc=jerinj@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).