DPDK patches and discussions
 help / color / mirror / Atom feed
From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: shaguna@chelsio.com, indranil@chelsio.com, nirranjan@chelsio.com
Subject: [dpdk-dev] [PATCH 3/9] net/cxgbe: add Compressed Local IP region
Date: Fri, 29 Jun 2018 23:42:18 +0530	[thread overview]
Message-ID: <c1496bb428f4602aad873edf2a24191a123d1e81.1530295732.git.rahul.lakkireddy@chelsio.com> (raw)
In-Reply-To: <cover.1530295732.git.rahul.lakkireddy@chelsio.com>
In-Reply-To: <cover.1530295732.git.rahul.lakkireddy@chelsio.com>

From: Shagun Agrawal <shaguna@chelsio.com>

CLIP region holds destination IPv6 addresses to be matched for
corresponding flows. Query firmware for CLIP resources and allocate
table to manage them. Also update LE-TCAM to use CLIP to reduce
number of slots needed to offload IPv6 flows.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
---
 drivers/net/cxgbe/Makefile              |   1 +
 drivers/net/cxgbe/base/adapter.h        |  32 ++++++
 drivers/net/cxgbe/base/t4fw_interface.h |  19 ++++
 drivers/net/cxgbe/clip_tbl.c            | 195 ++++++++++++++++++++++++++++++++
 drivers/net/cxgbe/clip_tbl.h            |  31 +++++
 drivers/net/cxgbe/cxgbe_filter.c        |  99 ++++++++++++----
 drivers/net/cxgbe/cxgbe_filter.h        |   1 +
 drivers/net/cxgbe/cxgbe_main.c          |  19 ++++
 8 files changed, 377 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/cxgbe/clip_tbl.c
 create mode 100644 drivers/net/cxgbe/clip_tbl.h

diff --git a/drivers/net/cxgbe/Makefile b/drivers/net/cxgbe/Makefile
index edc5d8188..5d66c4b3a 100644
--- a/drivers/net/cxgbe/Makefile
+++ b/drivers/net/cxgbe/Makefile
@@ -52,6 +52,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += sge.c
 SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += cxgbe_filter.c
 SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += cxgbe_flow.c
 SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += t4_hw.c
+SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += clip_tbl.c
 SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += t4vf_hw.c
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/cxgbe/base/adapter.h b/drivers/net/cxgbe/base/adapter.h
index de46ecfe3..3ed3252e8 100644
--- a/drivers/net/cxgbe/base/adapter.h
+++ b/drivers/net/cxgbe/base/adapter.h
@@ -11,6 +11,7 @@
 #include <rte_bus_pci.h>
 #include <rte_mbuf.h>
 #include <rte_io.h>
+#include <rte_rwlock.h>
 #include <rte_ethdev.h>
 
 #include "cxgbe_compat.h"
@@ -321,9 +322,40 @@ struct adapter {
 	int use_unpacked_mode; /* unpacked rx mode state */
 	rte_spinlock_t win0_lock;
 
+	unsigned int clipt_start; /* CLIP table start */
+	unsigned int clipt_end;   /* CLIP table end */
+	struct clip_tbl *clipt;   /* CLIP table */
+
 	struct tid_info tids;     /* Info used to access TID related tables */
 };
 
+/**
+ * t4_os_rwlock_init - initialize rwlock
+ * @lock: the rwlock
+ */
+static inline void t4_os_rwlock_init(rte_rwlock_t *lock)
+{
+	rte_rwlock_init(lock);
+}
+
+/**
+ * t4_os_write_lock - get a write lock
+ * @lock: the rwlock
+ */
+static inline void t4_os_write_lock(rte_rwlock_t *lock)
+{
+	rte_rwlock_write_lock(lock);
+}
+
+/**
+ * t4_os_write_unlock - unlock a write lock
+ * @lock: the rwlock
+ */
+static inline void t4_os_write_unlock(rte_rwlock_t *lock)
+{
+	rte_rwlock_write_unlock(lock);
+}
+
 /**
  * ethdev2pinfo - return the port_info structure associated with a rte_eth_dev
  * @dev: the rte_eth_dev
diff --git a/drivers/net/cxgbe/base/t4fw_interface.h b/drivers/net/cxgbe/base/t4fw_interface.h
index 842aa1263..2433bf20c 100644
--- a/drivers/net/cxgbe/base/t4fw_interface.h
+++ b/drivers/net/cxgbe/base/t4fw_interface.h
@@ -333,6 +333,7 @@ enum fw_cmd_opcodes {
 	FW_RSS_IND_TBL_CMD             = 0x20,
 	FW_RSS_GLB_CONFIG_CMD	       = 0x22,
 	FW_RSS_VI_CONFIG_CMD           = 0x23,
+	FW_CLIP_CMD                    = 0x28,
 	FW_DEBUG_CMD                   = 0x81,
 };
 
@@ -648,6 +649,8 @@ enum fw_params_param_dev {
  * physical and virtual function parameters
  */
 enum fw_params_param_pfvf {
+	FW_PARAMS_PARAM_PFVF_CLIP_START = 0x03,
+	FW_PARAMS_PARAM_PFVF_CLIP_END = 0x04,
 	FW_PARAMS_PARAM_PFVF_FILTER_START = 0x05,
 	FW_PARAMS_PARAM_PFVF_FILTER_END = 0x06,
 	FW_PARAMS_PARAM_PFVF_CPLFW4MSG_ENCAP = 0x31,
@@ -2167,6 +2170,22 @@ struct fw_rss_vi_config_cmd {
 	(((x) >> S_FW_RSS_VI_CONFIG_CMD_UDPEN) & M_FW_RSS_VI_CONFIG_CMD_UDPEN)
 #define F_FW_RSS_VI_CONFIG_CMD_UDPEN	V_FW_RSS_VI_CONFIG_CMD_UDPEN(1U)
 
+struct fw_clip_cmd {
+	__be32 op_to_write;
+	__be32 alloc_to_len16;
+	__be64 ip_hi;
+	__be64 ip_lo;
+	__be32 r4[2];
+};
+
+#define S_FW_CLIP_CMD_ALLOC		31
+#define V_FW_CLIP_CMD_ALLOC(x)		((x) << S_FW_CLIP_CMD_ALLOC)
+#define F_FW_CLIP_CMD_ALLOC		V_FW_CLIP_CMD_ALLOC(1U)
+
+#define S_FW_CLIP_CMD_FREE		30
+#define V_FW_CLIP_CMD_FREE(x)		((x) << S_FW_CLIP_CMD_FREE)
+#define F_FW_CLIP_CMD_FREE		V_FW_CLIP_CMD_FREE(1U)
+
 /******************************************************************************
  *   D E B U G   C O M M A N D s
  ******************************************************/
diff --git a/drivers/net/cxgbe/clip_tbl.c b/drivers/net/cxgbe/clip_tbl.c
new file mode 100644
index 000000000..fa5281cd4
--- /dev/null
+++ b/drivers/net/cxgbe/clip_tbl.c
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Chelsio Communications.
+ * All rights reserved.
+ */
+
+#include "common.h"
+#include "clip_tbl.h"
+
+/**
+ * Allocate clip entry in HW with associated IPV4/IPv6 address
+ */
+static int clip6_get_mbox(const struct rte_eth_dev *dev, const u32 *lip)
+{
+	struct adapter *adap = ethdev2adap(dev);
+	struct fw_clip_cmd c;
+	u64 hi = ((u64)lip[1]) << 32 | lip[0];
+	u64 lo = ((u64)lip[3]) << 32 | lip[2];
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CLIP_CMD) |
+				    F_FW_CMD_REQUEST | F_FW_CMD_WRITE);
+	c.alloc_to_len16 = cpu_to_be32(F_FW_CLIP_CMD_ALLOC | FW_LEN16(c));
+	c.ip_hi = hi;
+	c.ip_lo = lo;
+	return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, false);
+}
+
+/**
+ * Delete clip entry in HW having the associated IPV4/IPV6 address
+ */
+static int clip6_release_mbox(const struct rte_eth_dev *dev, const u32 *lip)
+{
+	struct adapter *adap = ethdev2adap(dev);
+	struct fw_clip_cmd c;
+	u64 hi = ((u64)lip[1]) << 32 | lip[0];
+	u64 lo = ((u64)lip[3]) << 32 | lip[2];
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CLIP_CMD) |
+				    F_FW_CMD_REQUEST | F_FW_CMD_READ);
+	c.alloc_to_len16 = cpu_to_be32(F_FW_CLIP_CMD_FREE | FW_LEN16(c));
+	c.ip_hi = hi;
+	c.ip_lo = lo;
+	return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, false);
+}
+
+/**
+ * cxgbe_clip_release - Release associated CLIP entry
+ * @ce: clip entry to release
+ *
+ * Releases ref count and frees up a clip entry from CLIP table
+ */
+void cxgbe_clip_release(struct rte_eth_dev *dev, struct clip_entry *ce)
+{
+	int ret;
+
+	t4_os_lock(&ce->lock);
+	if (rte_atomic32_dec_and_test(&ce->refcnt)) {
+		ret = clip6_release_mbox(dev, ce->addr);
+		if (ret)
+			dev_debug(adap, "CLIP FW DEL CMD failed: %d", ret);
+	}
+	t4_os_unlock(&ce->lock);
+}
+
+/**
+ * find_or_alloc_clipe - Find/Allocate a free CLIP entry
+ * @c: CLIP table
+ * @lip: IPV4/IPV6 address to compare/add
+ * Returns pointer to the IPV4/IPV6 entry found/created
+ *
+ * Finds/Allocates an CLIP entry to be used for a filter rule.
+ */
+static struct clip_entry *find_or_alloc_clipe(struct clip_tbl *c,
+					      const u32 *lip)
+{
+	struct clip_entry *end, *e;
+	struct clip_entry *first_free = NULL;
+	unsigned int clipt_size = c->clipt_size;
+
+	for (e = &c->cl_list[0], end = &c->cl_list[clipt_size]; e != end; ++e) {
+		if (rte_atomic32_read(&e->refcnt) == 0) {
+			if (!first_free)
+				first_free = e;
+		} else {
+			if (memcmp(lip, e->addr, sizeof(e->addr)) == 0)
+				goto exists;
+		}
+	}
+
+	if (first_free) {
+		e = first_free;
+		goto exists;
+	}
+
+	return NULL;
+
+exists:
+	return e;
+}
+
+static struct clip_entry *t4_clip_alloc(struct rte_eth_dev *dev,
+					u32 *lip, u8 v6)
+{
+	struct adapter *adap = ethdev2adap(dev);
+	struct clip_tbl *ctbl = adap->clipt;
+	struct clip_entry *ce;
+	int ret;
+
+	if (!ctbl)
+		return NULL;
+
+	t4_os_write_lock(&ctbl->lock);
+	ce = find_or_alloc_clipe(ctbl, lip);
+	if (ce) {
+		t4_os_lock(&ce->lock);
+		if (!rte_atomic32_read(&ce->refcnt)) {
+			rte_memcpy(ce->addr, lip, sizeof(ce->addr));
+			if (v6) {
+				ce->type = FILTER_TYPE_IPV6;
+				rte_atomic32_set(&ce->refcnt, 1);
+				ret = clip6_get_mbox(dev, lip);
+				if (ret) {
+					dev_debug(adap,
+						  "CLIP FW ADD CMD failed: %d",
+						  ret);
+					ce = NULL;
+				}
+			} else {
+				ce->type = FILTER_TYPE_IPV4;
+			}
+		} else {
+			rte_atomic32_inc(&ce->refcnt);
+		}
+		t4_os_unlock(&ce->lock);
+	}
+	t4_os_write_unlock(&ctbl->lock);
+
+	return ce;
+}
+
+/**
+ * cxgbe_clip_alloc - Allocate a IPV6 CLIP entry
+ * @dev: rte_eth_dev pointer
+ * @lip: IPV6 address to add
+ * Returns pointer to the CLIP entry created
+ *
+ * Allocates a IPV6 CLIP entry to be used for a filter rule.
+ */
+struct clip_entry *cxgbe_clip_alloc(struct rte_eth_dev *dev, u32 *lip)
+{
+	return t4_clip_alloc(dev, lip, FILTER_TYPE_IPV6);
+}
+
+/**
+ * Initialize CLIP Table
+ */
+struct clip_tbl *t4_init_clip_tbl(unsigned int clipt_start,
+				  unsigned int clipt_end)
+{
+	unsigned int clipt_size;
+	struct clip_tbl *ctbl;
+	unsigned int i;
+
+	if (clipt_start >= clipt_end)
+		return NULL;
+
+	clipt_size = clipt_end - clipt_start + 1;
+
+	ctbl = t4_os_alloc(sizeof(*ctbl) +
+			   clipt_size * sizeof(struct clip_entry));
+	if (!ctbl)
+		return NULL;
+
+	ctbl->clipt_start = clipt_start;
+	ctbl->clipt_size = clipt_size;
+
+	t4_os_rwlock_init(&ctbl->lock);
+
+	for (i = 0; i < ctbl->clipt_size; i++) {
+		t4_os_lock_init(&ctbl->cl_list[i].lock);
+		rte_atomic32_set(&ctbl->cl_list[i].refcnt, 0);
+	}
+
+	return ctbl;
+}
+
+/**
+ * Cleanup CLIP Table
+ */
+void t4_cleanup_clip_tbl(struct adapter *adap)
+{
+	if (adap->clipt)
+		t4_os_free(adap->clipt);
+}
diff --git a/drivers/net/cxgbe/clip_tbl.h b/drivers/net/cxgbe/clip_tbl.h
new file mode 100644
index 000000000..737ccc691
--- /dev/null
+++ b/drivers/net/cxgbe/clip_tbl.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Chelsio Communications.
+ * All rights reserved.
+ */
+
+#ifndef _CXGBE_CLIP_H_
+#define _CXGBE_CLIP_H_
+
+/*
+ * State for the corresponding entry of the HW CLIP table.
+ */
+struct clip_entry {
+	enum filter_type type;       /* entry type */
+	u32 addr[4];                 /* IPV4 or IPV6 address */
+	rte_spinlock_t lock;         /* entry lock */
+	rte_atomic32_t refcnt;       /* entry reference count */
+};
+
+struct clip_tbl {
+	unsigned int clipt_start;     /* start index of CLIP table */
+	unsigned int clipt_size;      /* size of CLIP table */
+	rte_rwlock_t lock;            /* table rw lock */
+	struct clip_entry cl_list[0]; /* MUST BE LAST */
+};
+
+struct clip_tbl *t4_init_clip_tbl(unsigned int clipt_start,
+				  unsigned int clipt_end);
+void t4_cleanup_clip_tbl(struct adapter *adap);
+struct clip_entry *cxgbe_clip_alloc(struct rte_eth_dev *dev, u32 *lip);
+void cxgbe_clip_release(struct rte_eth_dev *dev, struct clip_entry *ce);
+#endif /* _CXGBE_CLIP_H_ */
diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
index a5d20d164..bb2ebaa62 100644
--- a/drivers/net/cxgbe/cxgbe_filter.c
+++ b/drivers/net/cxgbe/cxgbe_filter.c
@@ -6,6 +6,7 @@
 #include "common.h"
 #include "t4_regs.h"
 #include "cxgbe_filter.h"
+#include "clip_tbl.h"
 
 /**
  * Initialize Hash Filters
@@ -164,6 +165,9 @@ int cxgbe_alloc_ftid(struct adapter *adap, unsigned int family)
  */
 void clear_filter(struct filter_entry *f)
 {
+	if (f->clipt)
+		cxgbe_clip_release(f->dev, f->clipt);
+
 	/*
 	 * The zeroing of the filter rule below clears the filter valid,
 	 * pending, locked flags etc. so it's all we need for
@@ -349,11 +353,14 @@ int cxgbe_del_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 	struct port_info *pi = (struct port_info *)(dev->data->dev_private);
 	struct adapter *adapter = pi->adapter;
 	struct filter_entry *f;
+	unsigned int chip_ver;
 	int ret;
 
 	if (filter_id >= adapter->tids.nftids)
 		return -ERANGE;
 
+	chip_ver = CHELSIO_CHIP_VERSION(adapter->params.chip);
+
 	ret = is_filter_set(&adapter->tids, filter_id, fs->type);
 	if (!ret) {
 		dev_warn(adap, "%s: could not find filter entry: %u\n",
@@ -361,6 +368,17 @@ int cxgbe_del_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 		return -EINVAL;
 	}
 
+	/*
+	 * Ensure filter id is aligned on the 2 slot boundary for T6,
+	 * and 4 slot boundary for cards below T6.
+	 */
+	if (fs->type) {
+		if (chip_ver < CHELSIO_T6)
+			filter_id &= ~(0x3);
+		else
+			filter_id &= ~(0x1);
+	}
+
 	f = &adapter->tids.ftid_tab[filter_id];
 	ret = writable_filter(f);
 	if (ret)
@@ -403,11 +421,15 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 	struct adapter *adapter = pi->adapter;
 	unsigned int fidx, iq, fid_bit = 0;
 	struct filter_entry *f;
+	unsigned int chip_ver;
+	uint8_t bitoff[16] = {0};
 	int ret;
 
 	if (filter_id >= adapter->tids.nftids)
 		return -ERANGE;
 
+	chip_ver = CHELSIO_CHIP_VERSION(adapter->params.chip);
+
 	ret = validate_filter(adapter, fs);
 	if (ret)
 		return ret;
@@ -426,38 +448,61 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 	iq = get_filter_steerq(dev, fs);
 
 	/*
-	 * IPv6 filters occupy four slots and must be aligned on
-	 * four-slot boundaries.  IPv4 filters only occupy a single
-	 * slot and have no alignment requirements but writing a new
-	 * IPv4 filter into the middle of an existing IPv6 filter
-	 * requires clearing the old IPv6 filter.
+	 * IPv6 filters occupy four slots and must be aligned on four-slot
+	 * boundaries for T5. On T6, IPv6 filters occupy two-slots and
+	 * must be aligned on two-slot boundaries.
+	 *
+	 * IPv4 filters only occupy a single slot and have no alignment
+	 * requirements but writing a new IPv4 filter into the middle
+	 * of an existing IPv6 filter requires clearing the old IPv6
+	 * filter.
 	 */
 	if (fs->type == FILTER_TYPE_IPV4) { /* IPv4 */
 		/*
-		 * If our IPv4 filter isn't being written to a
-		 * multiple of four filter index and there's an IPv6
-		 * filter at the multiple of 4 base slot, then we need
+		 * For T6, If our IPv4 filter isn't being written to a
+		 * multiple of two filter index and there's an IPv6
+		 * filter at the multiple of 2 base slot, then we need
 		 * to delete that IPv6 filter ...
+		 * For adapters below T6, IPv6 filter occupies 4 entries.
 		 */
-		fidx = filter_id & ~0x3;
+		if (chip_ver < CHELSIO_T6)
+			fidx = filter_id & ~0x3;
+		else
+			fidx = filter_id & ~0x1;
+
 		if (fidx != filter_id && adapter->tids.ftid_tab[fidx].fs.type) {
 			f = &adapter->tids.ftid_tab[fidx];
 			if (f->valid)
 				return -EBUSY;
 		}
 	} else { /* IPv6 */
-		/*
-		 * Ensure that the IPv6 filter is aligned on a
-		 * multiple of 4 boundary.
-		 */
-		if (filter_id & 0x3)
-			return -EINVAL;
+		unsigned int max_filter_id;
+
+		if (chip_ver < CHELSIO_T6) {
+			/*
+			 * Ensure that the IPv6 filter is aligned on a
+			 * multiple of 4 boundary.
+			 */
+			if (filter_id & 0x3)
+				return -EINVAL;
+
+			max_filter_id = filter_id + 4;
+		} else {
+			/*
+			 * For T6, CLIP being enabled, IPv6 filter would occupy
+			 * 2 entries.
+			 */
+			if (filter_id & 0x1)
+				return -EINVAL;
+
+			max_filter_id = filter_id + 2;
+		}
 
 		/*
 		 * Check all except the base overlapping IPv4 filter
 		 * slots.
 		 */
-		for (fidx = filter_id + 1; fidx < filter_id + 4; fidx++) {
+		for (fidx = filter_id + 1; fidx < max_filter_id; fidx++) {
 			f = &adapter->tids.ftid_tab[fidx];
 			if (f->valid)
 				return -EBUSY;
@@ -491,6 +536,16 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 		return ret;
 	}
 
+	/*
+	 * Allocate a clip table entry only if we have non-zero IPv6 address
+	 */
+	if (chip_ver > CHELSIO_T5 && fs->type &&
+	    memcmp(fs->val.lip, bitoff, sizeof(bitoff))) {
+		f->clipt = cxgbe_clip_alloc(f->dev, (u32 *)&f->fs.val.lip);
+		if (!f->clipt)
+			goto free_tid;
+	}
+
 	/*
 	 * Convert the filter specification into our internal format.
 	 * We copy the PF/VF specification into the Outer VLAN field
@@ -510,13 +565,17 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 	ret = set_filter_wr(dev, filter_id);
 	if (ret) {
 		fid_bit = f->tid - adapter->tids.ftid_base;
-		cxgbe_clear_ftid(&adapter->tids, fid_bit,
-				 fs->type ? FILTER_TYPE_IPV6 :
-					    FILTER_TYPE_IPV4);
-		clear_filter(f);
+		goto free_tid;
 	}
 
 	return ret;
+
+free_tid:
+	cxgbe_clear_ftid(&adapter->tids, fid_bit,
+			 fs->type ? FILTER_TYPE_IPV6 :
+				    FILTER_TYPE_IPV4);
+	clear_filter(f);
+	return ret;
 }
 
 /**
diff --git a/drivers/net/cxgbe/cxgbe_filter.h b/drivers/net/cxgbe/cxgbe_filter.h
index 27421a475..ce115f69f 100644
--- a/drivers/net/cxgbe/cxgbe_filter.h
+++ b/drivers/net/cxgbe/cxgbe_filter.h
@@ -141,6 +141,7 @@ struct filter_entry {
 	u32 locked:1;               /* filter is administratively locked */
 	u32 pending:1;              /* filter action is pending FW reply */
 	struct filter_ctx *ctx;     /* caller's completion hook */
+	struct clip_entry *clipt;   /* CLIP Table entry for IPv6 */
 	struct rte_eth_dev *dev;    /* Port's rte eth device */
 	void *private;              /* For use by apps using filter_entry */
 
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index c692939db..2050fe4db 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -37,6 +37,7 @@
 #include "t4_regs.h"
 #include "t4_msg.h"
 #include "cxgbe.h"
+#include "clip_tbl.h"
 
 /**
  * Allocate a chunk of memory. The allocated memory is cleared.
@@ -995,6 +996,14 @@ static int adap_init0(struct adapter *adap)
 	adap->tids.ftid_base = val[0];
 	adap->tids.nftids = val[1] - val[0] + 1;
 
+	params[0] = FW_PARAM_PFVF(CLIP_START);
+	params[1] = FW_PARAM_PFVF(CLIP_END);
+	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2, params, val);
+	if (ret < 0)
+		goto bye;
+	adap->clipt_start = val[0];
+	adap->clipt_end = val[1];
+
 	/*
 	 * Get device capabilities so we can determine what resources we need
 	 * to manage.
@@ -1509,6 +1518,7 @@ void cxgbe_close(struct adapter *adapter)
 		if (is_pf4(adapter))
 			t4_intr_disable(adapter);
 		tid_free(&adapter->tids);
+		t4_cleanup_clip_tbl(adapter);
 		t4_sge_tx_monitor_stop(adapter);
 		t4_free_sge_resources(adapter);
 		for_each_port(adapter, i) {
@@ -1672,6 +1682,15 @@ int cxgbe_probe(struct adapter *adapter)
 	print_adapter_info(adapter);
 	print_port_info(adapter);
 
+	adapter->clipt = t4_init_clip_tbl(adapter->clipt_start,
+					  adapter->clipt_end);
+	if (!adapter->clipt) {
+		/* We tolerate a lack of clip_table, giving up some
+		 * functionality
+		 */
+		dev_warn(adapter, "could not allocate CLIP. Continuing\n");
+	}
+
 	if (tid_init(&adapter->tids) < 0) {
 		/* Disable filtering support */
 		dev_warn(adapter, "could not allocate TID table, "
-- 
2.14.1

  parent reply	other threads:[~2018-06-29 18:13 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-29 18:12 [dpdk-dev] [PATCH 0/9] net/cxgbe: add support for offloading flows to HASH region Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 1/9] net/cxgbe: query firmware for HASH filter resources Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 2/9] net/cxgbe: validate flows offloaded to HASH region Rahul Lakkireddy
2018-06-29 18:12 ` Rahul Lakkireddy [this message]
2018-07-04 19:22   ` [dpdk-dev] [PATCH 3/9] net/cxgbe: add Compressed Local IP region Ferruh Yigit
2018-06-29 18:12 ` [dpdk-dev] [PATCH 4/9] net/cxgbe: add support to offload flows to HASH region Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 5/9] net/cxgbe: add support to delete flows in " Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 6/9] net/cxgbe: add support to query hit counters for " Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 7/9] net/cxgbe: add support to flush " Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 8/9] net/cxgbe: add support to match on ingress physical port Rahul Lakkireddy
2018-06-29 18:12 ` [dpdk-dev] [PATCH 9/9] net/cxgbe: add support to redirect packets to egress " Rahul Lakkireddy
2018-07-04 19:16 ` [dpdk-dev] [PATCH 0/9] net/cxgbe: add support for offloading flows to HASH region Ferruh Yigit
2018-07-04 19:51   ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c1496bb428f4602aad873edf2a24191a123d1e81.1530295732.git.rahul.lakkireddy@chelsio.com \
    --to=rahul.lakkireddy@chelsio.com \
    --cc=dev@dpdk.org \
    --cc=indranil@chelsio.com \
    --cc=nirranjan@chelsio.com \
    --cc=shaguna@chelsio.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).