From: "humin (Connor)" <humin29@huawei.com>
To: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "thomas@monjalon.net" <thomas@monjalon.net>,
"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>,
"linuxarm@huawei.com" <linuxarm@huawei.com>
Subject: Re: [dpdk-dev] [V5 1/3] ethdev: introduce FEC API
Date: Fri, 18 Sep 2020 09:57:19 +0800 [thread overview]
Message-ID: <c4fbda8b-61d8-9b5f-82f7-6ff7cd3e527b@huawei.com> (raw)
In-Reply-To: <BYAPR11MB3301F303CE9B397329B92C659A3E0@BYAPR11MB3301.namprd11.prod.outlook.com>
在 2020/9/17 20:49, Ananyev, Konstantin 写道:
>
>>
>> This patch adds Forward error correction(FEC) support for ethdev.
>> Introduce APIs which support query and config FEC information in
>> hardware.
>>
>> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
>> Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
>> Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
>> Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
>> ---
>> v4->v5:
>> Modifies FEC capa definitions using macros.
>> Add RTE_ prefix for public FEC mode enum.
>> add release notes about FEC for dpdk20_11.
>>
>> ---
>> v2->v3:
>> add function return value "-ENOTSUP" for API
>>
>> ---
>> doc/guides/rel_notes/release_20_11.rst | 13 +++++
>> lib/librte_ethdev/rte_ethdev.c | 50 +++++++++++++++++++
>> lib/librte_ethdev/rte_ethdev.h | 83 ++++++++++++++++++++++++++++++++
>> lib/librte_ethdev/rte_ethdev_core.h | 77 +++++++++++++++++++++++++++++
>> lib/librte_ethdev/rte_ethdev_version.map | 5 ++
>> 5 files changed, 228 insertions(+)
>>
>> diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
>> index cc72609..e4f0587 100644
>> --- a/doc/guides/rel_notes/release_20_11.rst
>> +++ b/doc/guides/rel_notes/release_20_11.rst
>> @@ -55,6 +55,19 @@ New Features
>> Also, make sure to start the actual text at the margin.
>> =======================================================
>>
>> +* **Added the FEC Library, a generic FEC query and config library.**
>> +
>> + Added the FEC library which provides an API for query FEC capabilities and
>> + FEC mode from device. Also, API for configuring FEC mode is also provided.
>> +
>> + Added hns3 FEC PMD, for supporting query and config FEC mode.
>> +
>> +* **Updated testpmd with a command for FEC.**
>> +
>> + Added a FEC command to testpmd app,
>> + ``show port <port_id> fec capabilities`` which queries FEC capabilities device supports.
>> + ``show port <port_id> fec_mode`` which queries FEC mode from device.
>> + ``set port <port_id> fec_mode <auto|off|rs|baser>`` which configures FEC mode to device.
>>
>> Removed Items
>> -------------
>> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
>> index 7858ad5..fde77c1 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -3642,6 +3642,56 @@ rte_eth_led_off(uint16_t port_id)
>> return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
>> }
>>
>> +int
>> +rte_eth_fec_get_capability(uint16_t port_id, uint32_t *fec_cap)
>> +{
>> + struct rte_eth_dev *dev;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_get_capability)(dev,
>> + fec_cap));
>> +}
>> +
>> +int
>> +rte_eth_fec_get(uint16_t port_id, enum rte_fec_mode *mode)
>> +{
>> + struct rte_eth_dev *dev;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, mode));
>> +}
>> +
>> +int
>> +rte_eth_fec_set(uint16_t port_id, enum rte_fec_mode mode)
>> +{
>> + struct rte_eth_dev *dev;
>> + uint32_t fec_mode_mask;
>> + int ret;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> +
>> + ret = rte_eth_fec_get_capability(port_id, &fec_mode_mask);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * Check whether the configured mode is within the FEC capability.
>> + * If not, the configured mode will not be supported.
>> + */
>> + if (!(fec_mode_mask & (1U << (uint32_t)mode))) {
>> + RTE_ETHDEV_LOG(ERR, "unsupported fec mode=%d\n", mode);
>> + return -EINVAL;
>> + }
>> +
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, mode));
>> +}
>> +
>> /*
>> * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
>> * an empty spot.
>> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
>> index 70295d7..aa79326 100644
>> --- a/lib/librte_ethdev/rte_ethdev.h
>> +++ b/lib/librte_ethdev/rte_ethdev.h
>> @@ -1511,6 +1511,25 @@ struct rte_eth_dcb_info {
>> struct rte_eth_dcb_tc_queue_mapping tc_queue;
>> };
>>
>> +/**
>> + * This enum indicates the possible (forward error correction)FEC modes
>> + * of an ethdev port.
>> + */
>> +enum rte_fec_mode {
>> + RTE_ETH_FEC_NOFEC = 0, /**< FEC is off */
>> + RTE_ETH_FEC_BASER, /**< FEC using common algorithm */
>> + RTE_ETH_FEC_RS, /**< FEC using RS algorithm */
>> + RTE_ETH_FEC_AUTO, /**< FEC autonegotiation modes */
>> + RTE_ETH_FEC_NUM
>
> It is better not to have RTE_ETH_FEC_NUM here:
> Any future additions to that enum would overwrite _NUM values and would
> considered as ABI breakage.
> Aprart from that:
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
>
HI,
it does not matter even though RTE_ETH_FEC_NUM value is changed
when adding new element to that enum. RTE_ETH_FEC_NUM is used as the MAX
vlaue of FEC modes, not one FEC mode itself.
One of the application scenarios is as follows,set "testpmd" as
an example:
show_fec_capability(uint32_t fec_cap)
{
uint32_t i;
if (fec_cap == 0) {
printf("FEC is not supported\n");
return;
}
printf("FEC capabilities: ");
for (i = RTE_ETH_FEC_BASER; i < RTE_ETH_FEC_NUM; i++) {
if (fec_cap & 1U << i)
printf("%s ", fec_mode_name[i].name);
}
printf("\n");
}
Hope for your reply.
>> +};
>> +
>> +/* This indicates FEC capabilities */
>> +#define RTE_ETH_FEC_CAPA_NOFEC (1U << RTE_ETH_FEC_NOFEC)
>> +#define RTE_ETH_FEC_CAPA_BASER (1U << RTE_ETH_FEC_BASER)
>> +#define RTE_ETH_FEC_CAPA_RS (1U << RTE_ETH_FEC_RS)
>> +#define RTE_ETH_FEC_CAPA_AUTO (1U << RTE_ETH_FEC_AUTO)
>> +
>> +
>> #define RTE_ETH_ALL RTE_MAX_ETHPORTS
>>
>> /* Macros to check for valid port */
>> @@ -3328,6 +3347,70 @@ int rte_eth_led_on(uint16_t port_id);
>> int rte_eth_led_off(uint16_t port_id);
>>
>> /**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Get Forward Error Correction(FEC) capability.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param fec_cap
>> + * returns the FEC capability from the device, as follows:
>> + * RTE_ETH_FEC_CAPA_NOFEC
>> + * RTE_ETH_FEC_CAPA_BASER
>> + * RTE_ETH_FEC_CAPA_RS
>> + * RTE_ETH_FEC_CAPA_AUTO
>> + * @return
>> + * - (0) if successful.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * that operation.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_get_capability(uint16_t port_id, uint32_t *fec_cap);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Get current Forward Error Correction(FEC) mode.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param mode
>> + * returns the FEC mode from the device.
>> + * @return
>> + * - (0) if successful.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * that operation.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_get(uint16_t port_id, enum rte_fec_mode *mode);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Set Forward Error Correction(FEC) mode.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param mode
>> + * the FEC mode.
>> + * @return
>> + * - (0) if successful.
>> + * - (-EINVAL) if the FEC mode is not valid.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_set(uint16_t port_id, enum rte_fec_mode mode);
>> +
>> +/**
>> * Get current status of the Ethernet link flow control for Ethernet device
>> *
>> * @param port_id
>> diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
>> index 32407dd..cd1acf1 100644
>> --- a/lib/librte_ethdev/rte_ethdev_core.h
>> +++ b/lib/librte_ethdev/rte_ethdev_core.h
>> @@ -604,6 +604,76 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
>> const struct rte_eth_hairpin_conf *hairpin_conf);
>>
>> /**
>> + * @internal
>> + * Get Forward Error Correction(FEC) capability.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param fec_cap
>> + * returns the FEC capability from the device.
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, get FEC success.
>> + * @retval -ENOTSUP
>> + * operation is not supported.
>> + * @retval -EIO
>> + * device is removed.
>> + * @retval -ENODEV
>> + * Device is gone.
>> + */
>> +typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
>> + uint32_t *fec_cap);
>> +
>> +/**
>> + * @internal
>> + * Get Forward Error Correction(FEC) mode.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param mode
>> + * returns the FEC mode from the device.
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, get FEC success.
>> + * @retval -ENOTSUP
>> + * operation is not supported.
>> + * @retval -EIO
>> + * device is removed.
>> + * @retval -ENODEV
>> + * Device is gone.
>> + */
>> +typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev, enum rte_fec_mode *mode);
>> +
>> +/**
>> + * @internal
>> + * Set Forward Error Correction(FEC) mode.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param mode
>> + * the FEC mode.
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, set FEC success.
>> + * @retval -ENOTSUP
>> + * operation is not supported.
>> + * @retval -EIO
>> + * device is removed.
>> + * @retval -ENODEV
>> + * Device is gone.
>> + */
>> +typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, enum rte_fec_mode mode);
>> +
>> +/**
>> * @internal A structure containing the functions exported by an Ethernet driver.
>> */
>> struct eth_dev_ops {
>> @@ -752,6 +822,13 @@ struct eth_dev_ops {
>> /**< Set up device RX hairpin queue. */
>> eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
>> /**< Set up device TX hairpin queue. */
>> +
>> + eth_fec_get_capability_t fec_get_capability;
>> + /**< Get Forward Error Correction(FEC) capability; */
>> + eth_fec_get_t fec_get;
>> + /**< Get Forward Error Correction(FEC) mode; */
>> + eth_fec_set_t fec_set;
>> + /**< Set Forward Error Correction(FEC) mode; */
>> };
>>
>> /**
>> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
>> index 02081d9..9f3fb8f 100644
>> --- a/lib/librte_ethdev/rte_ethdev_version.map
>> +++ b/lib/librte_ethdev/rte_ethdev_version.map
>> @@ -239,6 +239,11 @@ EXPERIMENTAL {
>> __rte_ethdev_trace_rx_burst;
>> __rte_ethdev_trace_tx_burst;
>> rte_flow_get_aged_flows;
>> +
>> + # added in 20.11
>> + rte_eth_fec_get_capability;
>> + rte_eth_fec_get;
>> + rte_eth_fec_set;
>> };
>>
>> INTERNAL {
>> --
>> 2.7.4
>
> .
>
next prev parent reply other threads:[~2020-09-18 1:57 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-28 11:32 [dpdk-dev] [RFC] ethdev: add Forward Error Correction support Min Hu(Connor)
2020-08-30 12:43 ` Andrew Rybchenko
2020-09-08 3:05 ` [dpdk-dev] [PATCH 0/3] add FEC support Min Hu (Connor)
2020-09-08 3:05 ` [dpdk-dev] [PATCH 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-09 2:42 ` [dpdk-dev] [PATCH V2 0/3] add FEC support Min Hu (Connor)
2020-09-09 2:42 ` [dpdk-dev] [PATCH V2 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-09 2:43 ` [dpdk-dev] [PATCH V2 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-09 2:43 ` [dpdk-dev] [PATCH V2 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-08 3:05 ` [dpdk-dev] [PATCH 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-08 3:05 ` [dpdk-dev] [PATCH 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 0/3] add FEC support Min Hu (Connor)
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-12 4:53 ` Ajit Khaparde
2020-09-16 14:10 ` Ananyev, Konstantin
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-10 21:02 ` [dpdk-dev] [PATCH V4 0/3] add FEC support Ajit Khaparde
2020-09-11 8:39 ` humin (Connor)
2020-09-16 12:37 ` humin (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 " Min Hu (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-17 8:52 ` [dpdk-dev] [V5 0/3] add FEC support Min Hu (Connor)
2020-09-17 8:52 ` [dpdk-dev] [V5 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-17 9:58 ` Andrew Rybchenko
2020-09-18 9:28 ` Min Hu (Connor)
2020-09-19 8:42 ` Andrew Rybchenko
2020-09-19 12:06 ` Min Hu (Connor)
2020-09-17 12:49 ` Ananyev, Konstantin
2020-09-18 1:57 ` humin (Connor) [this message]
2020-09-18 10:46 ` Ananyev, Konstantin
2020-09-17 8:52 ` [dpdk-dev] [V5 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-17 8:52 ` [dpdk-dev] [V5 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 0/3] add FEC support Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 0/3] add FEC support Min Hu (Connor)
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-18 12:13 ` Ananyev, Konstantin
2020-09-18 18:10 ` Ajit Khaparde
2020-09-19 8:44 ` Andrew Rybchenko
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-18 20:35 ` Ajit Khaparde
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 0/3] add FEC support Min Hu (Connor)
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 0/3] add FEC support Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-21 13:39 ` Andrew Rybchenko
2020-09-22 4:58 ` Min Hu (Connor)
2020-09-22 8:02 ` Andrew Rybchenko
2020-09-22 11:06 ` Min Hu (Connor)
2020-09-22 12:18 ` Andrew Rybchenko
2020-09-24 11:07 ` Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 0/3] add FEC support Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 0/4] add FEC support Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 1/4] ethdev: introduce FEC API Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 2/4] net/hns3: support FEC Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 3/4] app/testpmd: add FEC command Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 4/4] doc: add FEC API and PMD information Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 0/4] add FEC support Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 1/4] ethdev: introduce FEC API Min Hu (Connor)
2020-09-24 14:46 ` Andrew Rybchenko
2020-09-25 8:47 ` Min Hu (Connor)
2020-09-25 15:36 ` Ajit Khaparde
2020-09-25 16:12 ` Stephen Hemminger
2020-09-25 16:38 ` Ferruh Yigit
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 2/4] net/hns3: support FEC Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 3/4] app/testpmd: add FEC command Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 4/4] doc: add FEC API and PMD information Min Hu (Connor)
2020-09-24 13:52 ` Andrew Rybchenko
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 0/3] add FEC support Min Hu (Connor)
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-28 7:35 ` Andrew Rybchenko
2020-09-28 11:13 ` Min Hu (Connor)
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-27 7:08 ` [dpdk-dev] [PATCH V13 0/3] add FEC support Min Hu (Connor)
2020-09-28 10:27 ` Ferruh Yigit
2020-09-28 11:11 ` Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 " Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-28 12:48 ` Andrew Rybchenko
2020-09-29 2:09 ` Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 0/3] add FEC support Min Hu (Connor)
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-29 4:18 ` Ajit Khaparde
2020-09-29 8:44 ` Min Hu (Connor)
2020-09-30 2:45 ` Min Hu (Connor)
2020-09-30 8:15 ` Thomas Monjalon
2020-09-30 9:45 ` Andrew Rybchenko
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-30 16:52 ` Ferruh Yigit
2020-10-07 0:15 ` humin (Q)
2020-10-07 9:28 ` Ferruh Yigit
2020-10-07 23:38 ` humin (Q)
2020-10-08 10:06 ` Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 0/3] add FEC support Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 1/3] ethdev: introduce FEC API Min Hu (Connor)
2021-01-15 14:07 ` Ferruh Yigit
2021-01-16 2:03 ` Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 2/3] net/hns3: support FEC Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-10-08 15:57 ` Ferruh Yigit
2020-10-09 3:48 ` Min Hu (Connor)
2020-10-08 16:28 ` [dpdk-dev] [PATCH V16 0/3] add FEC support Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c4fbda8b-61d8-9b5f-82f7-6ff7cd3e527b@huawei.com \
--to=humin29@huawei.com \
--cc=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=linuxarm@huawei.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).