[dpdk-dev] 答复: [RFC]app/testpmd: time-consuming question of mlockall function execution

["humin (Q)" <humin29@huawei.com>]

Hello, David Marchand,

Thanks for your quick response.
 
We have another question about your patch. It seems that mlockall() also takes about two seconds after using this patch(about 0.2 seconds before using this patch), if we use "always" option for transparent hugepage configration. Is this reasonable and acceptable? 
If that is ok, when will the patch be uploaded to DPDK community?
Hope for your reply.
					Min Hu

-----邮件原件-----
发件人: David Marchand [mailto:david.marchand@redhat.com] 
发送时间: 2020年2月24日 16:48
收件人: humin (Q) <humin29@huawei.com>
抄送: dev@dpdk.org; Zhouchang (Forest) <forest.zhouchang@huawei.com>; Xiedonghui <xiedonghui@huawei.com>; liudongdong (C) <liudongdong3@huawei.com>; lihuisong <lihuisong@huawei.com>; Huwei (Xavier) <huwei87@hisilicon.com>; Burakov, Anatoly <anatoly.burakov@intel.com>; Thomas Monjalon <thomas@monjalon.net>; Maxime Coquelin <maxime.coquelin@redhat.com>
主题: Re: [RFC]app/testpmd: time-consuming question of mlockall function execution

Hello,

On Mon, Feb 24, 2020 at 7:35 AM humin (Q) <humin29@huawei.com> wrote:
> We found that if OS transparent hugepage uses non 'always', mlockall function in the main function of testpmd takes more than 25s to execute.
> The results of running on both x86 and ARM are the same. It's very unreasonable and deadly. The enable status of transparent hugepage on OS can be viewed by the following command.
> [root@X6000-C23-1U dpdk]#cat 
> /sys/kernel/mm/transparent_hugepage/enabled
> always [madvise] never
>
> Transparent hugepage on ARM is configured as 'madvise', 'never' or 
> 'always', testpmd runs with using strace as follows：
> ******************************* Transparent hugepage is configured as 
> 'madvise'  ******************************* [root@X6000-C23-1U dpdk]# 
> strace -T -e trace=mlockall ./testpmd -l 1-4 -w 0000:7d:01.0 
> --iova-mode=va -- -i
[snip]
> Interactive-mode selected
> mlockall(MCL_CURRENT|MCL_FUTURE)        = 0 <25.736362>
> <---------------------- Hang for 25 seconds
[snip]
>
> *****************************  Transparent hugepage is configured as 
> 'never'  ********************************* [root@X6000-C23-1U dpdk]# 
> strace -T -e trace=mlockall ./testpmd -l 1-4 -w 0000:7d:01.0 
> --iova-mode=va -- -i
[snip]
> Interactive-mode selected
> mlockall(MCL_CURRENT|MCL_FUTURE)        = 0 <25.737757>
> <---------------------- Hang for 25 seconds
[snip]
>
> *****************************  Transparent hugepage is configured as 
> 'always'  ********************************* [root@X6000-C23-1U dpdk]# 
> strace -T -e trace=mlockall testpmd -l 1-4 -w
> 0000:7d:01.0 --iova-mode=va -- -i
> strace: Can't stat 'testpmd': No such file or directory 
> [root@X6000-C23-1U dpdk]# strace -T -e trace=mlockall ./testpmd -l 1-4 
> -w 0000:7d:01.0 --iova-mode=va -- -i
[snip]
> Interactive-mode selected
> mlockall(MCL_CURRENT|MCL_FUTURE)        = 0 <0.208571>
> <---------------------- No Hang
[snip]

>
> We have also seen some discussions on this issue in following page:
> https://bugzilla.redhat.com/show_bug.cgi?id=1786923
>
> David Marchand has a related patch, as following page:
> https://github.com/david-marchand/dpdk/commit/f9e1b9fa101c9f4f16c07174
> 01a55790aecc6484 but this patch doesn't seem to have been submitted to 
> the community.

Yes, this is not ready, I worked on this locally since then (and the last version is not pushed to my github).
The main problem is that I have not been able to reproduce Eelco issue so far which justified the addition of mlockall().


> Transparent hugepage on ARM is configured as 'madvise' or 'never', 
> testpmd runs with using strace as follows：
> *******************************************************
> [root@X6000-C23-1U app]# strace -T -e trace=mlockall ./testpmd -l 1-4 
> -w
> 0000:7d:01.0 --iova-mode=va -- -i
[snip]
> Interactive-mode selected
> mlockall(MCL_CURRENT|MCL_FUTURE|MCL_ONFAULT) = 0 <1.955947>
> <---------------------- Hang for less than 2 seconds
> testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, 
> size=2176, socket=0
> testpmd: preferred mempool ops selected: ring_mp_mc Done
> testpmd> quit
>
> Bye...
> +++ exited with 0 +++
>
> We'd like to know what is the current development on this issue in 
> dpdk community. Thanks

There is also a report about coredumps being huge.
On this topic, there might be something to do with madvise + MADV_DONTDUMP.


I see various options from the hardest to the easiest:
- drop multiprocess support,
- rework the memory allocator so that this kind of side effect (mapping a huge number of unused pages) is not hit,
- change testpmd so that it locks only the pages of interest (this is the patch that I had been looking at for now),
- change testpmd so that it does not call mlockall by default,

The last option is likely the quickest workaround.

I write "options", but the last two points feel like "band aid" fixes.
And it does not solve the problem for other applications that will have to implement similar workarounds.

Anatoly warned that touching the memory allocator is going to be hell.
Quite sad to reach this state because it feels like people are just starting to hit the changes that entered dpdk 18.05.


Of course, other ideas welcome!

--
David Marchand