DPDK patches and discussions
 help / color / mirror / Atom feed
From: Anatoly Burakov <anatoly.burakov@intel.com>
To: dev@dpdk.org
Cc: david.hunt@intel.com, liang.j.ma@intel.com, reshma.pattan@intel.com
Subject: [dpdk-dev] [PATCH 0/3] Add interrupt-only mode to l3fwd-power
Date: Thu, 28 May 2020 10:13:48 +0100
Message-ID: <cover.1590656906.git.anatoly.burakov@intel.com> (raw)

Since 20.05, l3fwd-power has become much more stringent about
whether it allows initialization without initializing the
librte_power library with it. This means that while previously
the app could have been used to test RX interrupts functionality
even if the app itself was in a half-working state, it is now
no longer possible to do so.

To address this use case, we're adding an interrupt-only mode
that does not rely on librte_power or telemetry. This enables
using l3fwd-power in environments where librte_power is not
expected to work (such as inside a VM or on non-IA
architectures). The RX/TX path is basically copy paste from
legacy RX/TX path but with librte_power bits taken out.

There seem to be two opposing schools of thought on whether we
should have more or less examples. This patchset goes in the
"less" direction where we add a new mode to an existing app,
rather than creating a new one like it could be argued it
deserves.

Anatoly Burakov (3):
  l3fwd-power: disable interrupts by default
  l3fwd-power: only allow supported power library envs
  l3fwd-power: add interrupt-only mode

 examples/l3fwd-power/main.c | 234 +++++++++++++++++++++++++++++++++---
 1 file changed, 217 insertions(+), 17 deletions(-)

-- 
2.17.1

             reply	other threads:[~2020-05-28  9:13 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-28  9:13 Anatoly Burakov [this message]
2020-05-28  9:13 ` [dpdk-dev] [PATCH 1/3] l3fwd-power: disable interrupts by default Anatoly Burakov
2020-05-28  9:13 ` [dpdk-dev] [PATCH 2/3] l3fwd-power: only allow supported power library envs Anatoly Burakov
2020-05-28  9:13 ` [dpdk-dev] [PATCH 3/3] l3fwd-power: add interrupt-only mode Anatoly Burakov
2020-05-29 13:19   ` Harman Kalra
2020-05-29 14:19     ` Burakov, Anatoly
2020-05-30 10:02       ` [dpdk-dev] [EXT] " Harman Kalra
2020-06-01 12:50         ` Burakov, Anatoly
2020-06-02 10:23           ` Harman Kalra
2020-06-02 12:16             ` Harman Kalra
2020-06-15 11:31               ` Burakov, Anatoly
2020-06-15 11:43                 ` Jerin Jacob
2020-06-15 15:05                   ` Burakov, Anatoly
2020-06-15 15:21                     ` Jerin Jacob
2020-06-15 15:45                       ` Burakov, Anatoly
2020-06-15 16:29                         ` Jerin Jacob
2020-06-16  9:31                           ` Burakov, Anatoly
2020-06-16 17:09                             ` Jerin Jacob
2020-06-08  1:24 ` [dpdk-dev] [PATCH 0/3] Add interrupt-only mode to l3fwd-power Wang, Yinan
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 0/7] " Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 " Anatoly Burakov
2020-07-11 11:35     ` Thomas Monjalon
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 1/7] l3fwd-power: disable interrupts by default Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 2/7] l3fwd-power: only allow supported power library envs Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 3/7] l3fwd-power: code style and flow fixes Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 4/7] l3fwd-power: add support for requesting legacy mode Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 5/7] l3fwd-power: add interrupt-only mode Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 6/7] power: add API to probe support for a specific env Anatoly Burakov
2020-06-19 10:53   ` [dpdk-dev] [PATCH v3 7/7] l3fwd-power: add auto-selection of default mode Anatoly Burakov
2020-07-11 10:07     ` Thomas Monjalon
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 1/7] l3fwd-power: disable interrupts by default Anatoly Burakov
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 2/7] l3fwd-power: only allow supported power library envs Anatoly Burakov
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 3/7] l3fwd-power: code style and flow fixes Anatoly Burakov
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 4/7] l3fwd-power: add support for requesting legacy mode Anatoly Burakov
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 5/7] l3fwd-power: add interrupt-only mode Anatoly Burakov
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 6/7] power: add API to probe support for a specific env Anatoly Burakov
2020-06-18 17:18 ` [dpdk-dev] [PATCH v2 7/7] l3fwd-power: add auto-selection of default mode Anatoly Burakov
2020-06-19  7:37   ` [dpdk-dev] [EXT] " Harman Kalra
2020-06-19  9:56     ` Burakov, Anatoly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1590656906.git.anatoly.burakov@intel.com \
    --to=anatoly.burakov@intel.com \
    --cc=david.hunt@intel.com \
    --cc=dev@dpdk.org \
    --cc=liang.j.ma@intel.com \
    --cc=reshma.pattan@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git