DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] 【BUG REPORT】l3fwd-power can not exit by ctrl+c
@ 2020-05-20  3:18 oulijun
  2020-05-20  7:22 ` David Marchand
  2020-05-20  9:45 ` Burakov, Anatoly
  0 siblings, 2 replies; 19+ messages in thread
From: oulijun @ 2020-05-20  3:18 UTC (permalink / raw)
  To: david.marchand, harry.van.haaren; +Cc: dev

Hi, David Marchand && guys

    I am using 20.05-rc2 version to test based on HNS3 NIC hardware, and 
found that after starting l3fwd-power,

using ctrl+c cannot force quit. But I revert the patch(33666b4 service: 
fix crash on exit) and it is ok.

the log as follows:

Initializing rx queues on lcore 26 ...
Initializing rx queues on lcore 27 ... rxq=0,0,0 Port 0: softly parse 
packet type info


Checking link status...............0000:7d:00.1 
hns3_update_link_status(): Link status change to up!
done
Port 0 Link Up - speed 25000 Mbps - full-duplex
L3FWD_POWER: entering main loop on lcore 27
L3FWD_POWER:  -- lcoreid=27 portid=0 rxqueueid=0
L3FWD_POWER: lcore 26 has nothing to do
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
^CPOWER: Power management governor of lcore 26 has been set back to  
successfully
POWER: Power management of lcore 26 has exited from 'userspace' mode and 
been set back to the original
POWER: Power management governor of lcore 27 has been set back to 
successfully
POWER: Power management of lcore 27 has exited from 'userspace' mode and 
been set back to the original
0000:7d:00.1 hns3_dev_close(): Close port 0 finished
User forced exit
[root@centos-C3 build]#

Thanks

Lijun Ou







^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2020-05-27  8:57 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-20  3:18 [dpdk-dev] 【BUG REPORT】l3fwd-power can not exit by ctrl+c oulijun
2020-05-20  7:22 ` David Marchand
2020-05-20  8:41   ` oulijun
2020-05-20  8:49     ` David Marchand
2020-05-20 11:37     ` Burakov, Anatoly
2020-05-22  8:17   ` oulijun
2020-05-22  9:00     ` Burakov, Anatoly
2020-05-22  9:02     ` Hunt, David
2020-05-26  3:50       ` oulijun
2020-05-26  8:36         ` Hunt, David
2020-05-26  9:11           ` oulijun
2020-05-27  6:10           ` oulijun
2020-05-27  8:21             ` Hunt, David
2020-05-26  9:24         ` Burakov, Anatoly
2020-05-27  6:04           ` oulijun
2020-05-27  8:57             ` Burakov, Anatoly
2020-05-20  9:45 ` Burakov, Anatoly
2020-05-21  1:26   ` oulijun
2020-05-21 10:46     ` Burakov, Anatoly

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git