DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: Andrew Rybchenko <arybchenko@solarflare.com>, <ferruh.yigit@intel.com>
Cc: Thomas Monjalon <thomas@monjalon.net>, <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2 2/2] ethdev: fix VLAN offloads set if no relative capabilities
Date: Mon, 22 Jun 2020 10:57:10 +0800
Message-ID: <d3226649-4897-45f5-ad63-b1d568ff1118@huawei.com> (raw)
In-Reply-To: <364d1ff5-d05d-8855-2095-14b8af60258f@solarflare.com>

Hi, Andrew Rybchenko


On 2020/6/21 21:44, Andrew Rybchenko wrote:
> On 6/20/20 9:53 AM, Wei Hu (Xavier) wrote:
>> Currently, there is a potential problem that calling the API function
>> rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
>> driver does not support. If the PMD driver does not support certain VLAN
>> hardware offloads and does not check for it, the hardware setting will
>> not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
>> will be turned on.
>>
>> It is supposed to check the hardware capabilities to decide whether the
>> relative callback needs to be called just like the behavior in the API
>> function named rte_eth_dev_configure. And it is also needed to cleanup
>> duplicated checks which are done in some PMDs.
>>
>> Fixes: a4996bd89c42 ("ethdev: new Rx/Tx offloads API")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
>> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
> For ethdev part:
> Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
>
> I'd like to highlight that it is behaviour change for some PMDs
> which simply ignore (with error/warning log message)
> unsupported VLAN offloads, but now it will fail. We should
> very carefully consider backporting of these changes.
> I'd say we should, since it is rather a bug fix.
>
> IMHO, it is better to send v3 using
> --to-cmd ./devtools/get-maintainer.sh
> in order to have all driver maintainers in To.
OK, I will send V3.

Thanks, Xavier
>> ---
>> v1 -> v2: cleanup duplicated checks which are done in som PMDs.
>> ---
>>   drivers/net/dpaa2/dpaa2_ethdev.c           |  5 -----
>>   drivers/net/enic/enic_ethdev.c             | 12 ------------
>>   drivers/net/fm10k/fm10k_ethdev.c           | 20 --------------------
>>   drivers/net/hinic/hinic_pmd_ethdev.c       |  6 ------
>>   drivers/net/i40e/i40e_ethdev.c             |  5 -----
>>   drivers/net/nfp/nfp_net.c                  |  5 -----
>>   drivers/net/octeontx/octeontx_ethdev_ops.c | 10 ----------
>>   drivers/net/octeontx2/otx2_vlan.c          |  5 -----
>>   drivers/net/qede/qede_ethdev.c             |  3 ---
>>   lib/librte_ethdev/rte_ethdev.c             | 21 +++++++++++++++++++++
>>   10 files changed, 21 insertions(+), 71 deletions(-)
>>
>> diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
>> index 2f031ec..da5018f 100644
>> --- a/drivers/net/dpaa2/dpaa2_ethdev.c
>> +++ b/drivers/net/dpaa2/dpaa2_ethdev.c
>> @@ -169,11 +169,6 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
>>   			DPAA2_PMD_INFO("Unable to set vlan filter = %d", ret);
>>   	}
>>   next_mask:
>> -	if (mask & ETH_VLAN_EXTEND_MASK) {
>> -		if (dev->data->dev_conf.rxmode.offloads &
>> -			DEV_RX_OFFLOAD_VLAN_EXTEND)
>> -			DPAA2_PMD_INFO("VLAN extend offload not supported");
>> -	}
>>   
>>   	return 0;
>>   }
>> diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
>> index 32d5397..ef8900d 100644
>> --- a/drivers/net/enic/enic_ethdev.c
>> +++ b/drivers/net/enic/enic_ethdev.c
>> @@ -374,18 +374,6 @@ static int enicpmd_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
>>   			enic->ig_vlan_strip_en = 0;
>>   	}
>>   
>> -	if ((mask & ETH_VLAN_FILTER_MASK) &&
>> -	    (offloads & DEV_RX_OFFLOAD_VLAN_FILTER)) {
>> -		dev_warning(enic,
>> -			"Configuration of VLAN filter is not supported\n");
>> -	}
>> -
>> -	if ((mask & ETH_VLAN_EXTEND_MASK) &&
>> -	    (offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)) {
>> -		dev_warning(enic,
>> -			"Configuration of extended VLAN is not supported\n");
>> -	}
>> -
>>   	return enic_set_vlan_strip(enic);
>>   }
>>   
>> diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
>> index f537ab2..47f6f76 100644
>> --- a/drivers/net/fm10k/fm10k_ethdev.c
>> +++ b/drivers/net/fm10k/fm10k_ethdev.c
>> @@ -1577,26 +1577,6 @@ fm10k_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
>>   static int
>>   fm10k_vlan_offload_set(struct rte_eth_dev *dev, int mask)
>>   {
>> -	if (mask & ETH_VLAN_STRIP_MASK) {
>> -		if (!(dev->data->dev_conf.rxmode.offloads &
>> -			DEV_RX_OFFLOAD_VLAN_STRIP))
>> -			PMD_INIT_LOG(ERR, "VLAN stripping is "
>> -					"always on in fm10k");
>> -	}
>> -
>> -	if (mask & ETH_VLAN_EXTEND_MASK) {
>> -		if (dev->data->dev_conf.rxmode.offloads &
>> -			DEV_RX_OFFLOAD_VLAN_EXTEND)
>> -			PMD_INIT_LOG(ERR, "VLAN QinQ is not "
>> -					"supported in fm10k");
>> -	}
>> -
>> -	if (mask & ETH_VLAN_FILTER_MASK) {
>> -		if (!(dev->data->dev_conf.rxmode.offloads &
>> -			DEV_RX_OFFLOAD_VLAN_FILTER))
>> -			PMD_INIT_LOG(ERR, "VLAN filter is always on in fm10k");
>> -	}
>> -
>>   	return 0;
>>   }
>>   
>> diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
>> index 0c3e1c0..0009a61 100644
>> --- a/drivers/net/hinic/hinic_pmd_ethdev.c
>> +++ b/drivers/net/hinic/hinic_pmd_ethdev.c
>> @@ -1701,12 +1701,6 @@ static int hinic_vlan_offload_set(struct rte_eth_dev *dev, int mask)
>>   			  nic_dev->proc_dev_name, dev->data->port_id);
>>   	}
>>   
>> -	if (mask & ETH_VLAN_EXTEND_MASK) {
>> -		PMD_DRV_LOG(ERR, "Don't support vlan qinq, device: %s, port_id: %d",
>> -			  nic_dev->proc_dev_name, dev->data->port_id);
>> -		return -ENOTSUP;
>> -	}
>> -
>>   	return 0;
>>   }
>>   
>> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
>> index 970a31c..9211cf5 100644
>> --- a/drivers/net/i40e/i40e_ethdev.c
>> +++ b/drivers/net/i40e/i40e_ethdev.c
>> @@ -3877,11 +3877,6 @@ i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
>>   	struct i40e_vsi *vsi = pf->main_vsi;
>>   	struct rte_eth_rxmode *rxmode;
>>   
>> -	if (mask & ETH_QINQ_STRIP_MASK) {
>> -		PMD_DRV_LOG(ERR, "Strip qinq is not supported.");
>> -		return -ENOTSUP;
>> -	}
>> -
>>   	rxmode = &dev->data->dev_conf.rxmode;
>>   	if (mask & ETH_VLAN_FILTER_MASK) {
>>   		if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
>> diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
>> index 2460ee1..b7a91ae 100644
>> --- a/drivers/net/nfp/nfp_net.c
>> +++ b/drivers/net/nfp/nfp_net.c
>> @@ -2353,11 +2353,6 @@ nfp_net_vlan_offload_set(struct rte_eth_dev *dev, int mask)
>>   	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>>   	new_ctrl = 0;
>>   
>> -	if ((mask & ETH_VLAN_FILTER_OFFLOAD) ||
>> -	    (mask & ETH_VLAN_EXTEND_OFFLOAD))
>> -		PMD_DRV_LOG(INFO, "No support for ETH_VLAN_FILTER_OFFLOAD or"
>> -			" ETH_VLAN_EXTEND_OFFLOAD");
>> -
>>   	/* Enable vlan strip if it is not configured yet */
>>   	if ((mask & ETH_VLAN_STRIP_OFFLOAD) &&
>>   	    !(hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
>> diff --git a/drivers/net/octeontx/octeontx_ethdev_ops.c b/drivers/net/octeontx/octeontx_ethdev_ops.c
>> index ff627a6..dbe13ce 100644
>> --- a/drivers/net/octeontx/octeontx_ethdev_ops.c
>> +++ b/drivers/net/octeontx/octeontx_ethdev_ops.c
>> @@ -43,16 +43,6 @@ octeontx_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)
>>   
>>   	rxmode = &dev->data->dev_conf.rxmode;
>>   
>> -	if (mask & ETH_VLAN_EXTEND_MASK) {
>> -		octeontx_log_err("Extend offload not supported");
>> -		return -ENOTSUP;
>> -	}
>> -
>> -	if (mask & ETH_VLAN_STRIP_MASK) {
>> -		octeontx_log_err("VLAN strip offload not supported");
>> -		return -ENOTSUP;
>> -	}
>> -
>>   	if (mask & ETH_VLAN_FILTER_MASK) {
>>   		if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
>>   			rc = octeontx_vlan_hw_filter(nic, true);
>> diff --git a/drivers/net/octeontx2/otx2_vlan.c b/drivers/net/octeontx2/otx2_vlan.c
>> index 322a565..7357b06 100644
>> --- a/drivers/net/octeontx2/otx2_vlan.c
>> +++ b/drivers/net/octeontx2/otx2_vlan.c
>> @@ -717,11 +717,6 @@ otx2_nix_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
>>   
>>   	rxmode = &eth_dev->data->dev_conf.rxmode;
>>   
>> -	if (mask & ETH_VLAN_EXTEND_MASK) {
>> -		otx2_err("Extend offload not supported");
>> -		return -ENOTSUP;
>> -	}
>> -
>>   	if (mask & ETH_VLAN_STRIP_MASK) {
>>   		if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP) {
>>   			offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
>> diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
>> index c4f8f12..04d17c7 100644
>> --- a/drivers/net/qede/qede_ethdev.c
>> +++ b/drivers/net/qede/qede_ethdev.c
>> @@ -1036,9 +1036,6 @@ static int qede_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
>>   		}
>>   	}
>>   
>> -	if (mask & ETH_VLAN_EXTEND_MASK)
>> -		DP_ERR(edev, "Extend VLAN not supported\n");
>> -
>>   	qdev->vlan_offload_mask = mask;
>>   
>>   	DP_INFO(edev, "VLAN offload mask %d\n", mask);
>> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
>> index b0b0474..bf79749 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -3260,12 +3260,14 @@ rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
>>   int
>>   rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
>>   {
>> +	struct rte_eth_dev_info dev_info;
>>   	struct rte_eth_dev *dev;
>>   	int ret = 0;
>>   	int mask = 0;
>>   	int cur, org = 0;
>>   	uint64_t orig_offloads;
>>   	uint64_t dev_offloads;
>> +	uint64_t new_offloads;
>>   
>>   	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>>   	dev = &rte_eth_devices[port_id];
>> @@ -3319,6 +3321,25 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
>>   	if (mask == 0)
>>   		return ret;
>>   
>> +	ret = rte_eth_dev_info_get(port_id, &dev_info);
>> +	if (ret != 0)
>> +		return ret;
>> +
>> +	/*
>> +	 * New added Rx VLAN offloading which are not enabled in
>> +	 * rte_eth_dev_configure() must be within its device capabilities
>> +	 */
>> +	if ((dev_offloads & dev_info.rx_offload_capa) != dev_offloads) {
>> +		new_offloads = dev_offloads & ~orig_offloads;
>> +		RTE_ETHDEV_LOG(ERR,
>> +			"Ethdev port_id=%u requested new added VLAN offloads "
>> +			"0x%" PRIx64 " must be within Rx offloads capabilities "
>> +			"0x%" PRIx64 " in %s()\n",
>> +			port_id, new_offloads, dev_info.rx_offload_capa,
>> +			__func__);
>> +		return -EINVAL;
>> +	}
>> +
>>   	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_offload_set, -ENOTSUP);
>>   	dev->data->dev_conf.rxmode.offloads = dev_offloads;
>>   	ret = (*dev->dev_ops->vlan_offload_set)(dev, mask);
>>
> .
>


      reply	other threads:[~2020-06-22  2:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-20  6:53 [dpdk-dev] [PATCH v2 0/2] ethdev: minor bugfixes Wei Hu (Xavier)
2020-06-20  6:53 ` [dpdk-dev] [PATCH v2 1/2] ethdev: fix data room size verification in Rx queue setup Wei Hu (Xavier)
2020-06-20  6:53 ` [dpdk-dev] [PATCH v2 2/2] ethdev: fix VLAN offloads set if no relative capabilities Wei Hu (Xavier)
2020-06-21 13:44   ` Andrew Rybchenko
2020-06-22  2:57     ` Wei Hu (Xavier) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d3226649-4897-45f5-ad63-b1d568ff1118@huawei.com \
    --to=xavier.huwei@huawei.com \
    --cc=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git