From: Hemant <hemant.agrawal@nxp.com>
To: eric zhang <eric.zhang@windriver.com>,
anatoly.burakov@intel.com, santosh.shukla@caviumnetworks.com
Cc: dev@dpdk.org, Allain.Legacy@windriver.com, Matt.Peters@windriver.com
Subject: Re: [dpdk-dev] [PATCH v2 1/2] eal: add eal option to configure iova mode
Date: Wed, 26 Sep 2018 12:40:52 +0530 [thread overview]
Message-ID: <d5668925-ae5c-5f13-8af1-ce05f7e4d940@nxp.com> (raw)
In-Reply-To: <1537297807-19584-1-git-send-email-eric.zhang@windriver.com>
On 9/19/2018 12:40 AM, eric zhang wrote:
> From: Santosh Shukla <santosh.shukla@caviumnetworks.com>
>
> In the case of user don't want to use bus iova scheme and want
> to override.
>
> For that, Adding eal option --iova-mode=<string> where valid input
> string is 'pa' or 'va'.
>
> Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
> Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Just wondering if you want to add some description in:
1. Prog Guide - EAL section
2. EAL Command line options for testpmd
(https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html?highlight=eal)
Otherwise LGTM
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
> lib/librte_eal/common/eal_common_options.c | 30 ++++++++++++++++++++++++++++++
> lib/librte_eal/common/eal_internal_cfg.h | 1 +
> lib/librte_eal/common/eal_options.h | 2 ++
> 3 files changed, 33 insertions(+)
>
> diff --git a/lib/librte_eal/common/eal_common_options.c b/lib/librte_eal/common/eal_common_options.c
> index 996a034..ab2a28c 100644
> --- a/lib/librte_eal/common/eal_common_options.c
> +++ b/lib/librte_eal/common/eal_common_options.c
> @@ -82,6 +82,7 @@
> {OPT_HELP, 0, NULL, OPT_HELP_NUM },
> {OPT_HUGE_DIR, 1, NULL, OPT_HUGE_DIR_NUM },
> {OPT_HUGE_UNLINK, 0, NULL, OPT_HUGE_UNLINK_NUM },
> + {OPT_IOVA_MODE, 1, NULL, OPT_IOVA_MODE_NUM },
> {OPT_LCORES, 1, NULL, OPT_LCORES_NUM },
> {OPT_LOG_LEVEL, 1, NULL, OPT_LOG_LEVEL_NUM },
> {OPT_MASTER_LCORE, 1, NULL, OPT_MASTER_LCORE_NUM },
> @@ -218,6 +219,7 @@ struct device_option {
> #endif
> internal_cfg->vmware_tsc_map = 0;
> internal_cfg->create_uio_dev = 0;
> + internal_cfg->iova_mode = -1;
> internal_cfg->mbuf_pool_ops_name = RTE_MBUF_DEFAULT_MEMPOOL_OPS;
> }
>
> @@ -994,6 +996,25 @@ static int xdigit2val(unsigned char c)
> return RTE_PROC_INVALID;
> }
>
> +static int
> +eal_parse_iova_mode(const char *name)
> +{
> + int mode;
> +
> + if (name == NULL)
> + return -1;
> +
> + if (!strcmp("pa", name))
> + mode = RTE_IOVA_PA;
> + else if (!strcmp("va", name))
> + mode = RTE_IOVA_VA;
> + else
> + return -1;
> +
> + internal_config.iova_mode = mode;
> + return 0;
> +}
> +
> int
> eal_parse_common_option(int opt, const char *optarg,
> struct internal_config *conf)
> @@ -1158,6 +1179,13 @@ static int xdigit2val(unsigned char c)
> }
> core_parsed = 1;
> break;
> + case OPT_IOVA_MODE_NUM:
> + if (eal_parse_iova_mode(optarg) < 0) {
> + RTE_LOG(ERR, EAL, "invalid parameters for --"
> + OPT_IOVA_MODE "\n");
> + return -1;
> + }
> + break;
>
> /* don't know what to do, leave this to caller */
> default:
> @@ -1306,6 +1334,8 @@ static int xdigit2val(unsigned char c)
> " -h, --help This help\n"
> "\nEAL options for DEBUG use only:\n"
> " --"OPT_HUGE_UNLINK" Unlink hugepage files after init\n"
> + " --"OPT_IOVA_MODE" Set iova mode. 'pa' for IOVA_PA\n"
> + " 'va' for IOVA_VA\n"
> " --"OPT_NO_HUGE" Use malloc instead of hugetlbfs\n"
> " --"OPT_NO_PCI" Disable PCI\n"
> " --"OPT_NO_HPET" Disable HPET\n"
> diff --git a/lib/librte_eal/common/eal_internal_cfg.h b/lib/librte_eal/common/eal_internal_cfg.h
> index fa6ccbe..29bf53f 100644
> --- a/lib/librte_eal/common/eal_internal_cfg.h
> +++ b/lib/librte_eal/common/eal_internal_cfg.h
> @@ -83,6 +83,7 @@ struct internal_config {
> const char *hugepage_dir; /**< specific hugetlbfs directory to use */
> const char *mbuf_pool_ops_name; /**< mbuf pool ops name */
> unsigned num_hugepage_sizes; /**< how many sizes on this system */
> + enum rte_iova_mode iova_mode ; /**< Set iova mode on this system */
> struct hugepage_info hugepage_info[MAX_HUGEPAGE_SIZES];
> };
> extern struct internal_config internal_config; /**< Global EAL configuration. */
> diff --git a/lib/librte_eal/common/eal_options.h b/lib/librte_eal/common/eal_options.h
> index 30e6bb4..7786189 100644
> --- a/lib/librte_eal/common/eal_options.h
> +++ b/lib/librte_eal/common/eal_options.h
> @@ -83,6 +83,8 @@ enum {
> OPT_VFIO_INTR_NUM,
> #define OPT_VMWARE_TSC_MAP "vmware-tsc-map"
> OPT_VMWARE_TSC_MAP_NUM,
> +#define OPT_IOVA_MODE "iova-mode"
> + OPT_IOVA_MODE_NUM,
> OPT_LONG_MAX_NUM
> };
>
next prev parent reply other threads:[~2018-09-26 7:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 19:10 eric zhang
2018-09-18 19:10 ` [dpdk-dev] [PATCH v2 2/2] eal: force IOVA to particular mode eric zhang
2018-09-24 20:42 ` Zhang, Qing Long (Eric)
2018-09-25 7:16 ` Santosh Shukla
2018-09-25 20:11 ` Zhang, Qing Long (Eric)
2018-09-26 7:11 ` Hemant
2018-09-26 12:43 ` Burakov, Anatoly
2018-09-26 7:10 ` Hemant [this message]
2018-09-26 12:42 ` [dpdk-dev] [PATCH v2 1/2] eal: add eal option to configure iova mode Burakov, Anatoly
2018-10-01 16:00 ` Eric Zhang
2018-10-02 8:30 ` Ferruh Yigit
-- strict thread matches above, loose matches on Subject: below --
2018-09-18 19:09 eric zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d5668925-ae5c-5f13-8af1-ce05f7e4d940@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=Allain.Legacy@windriver.com \
--cc=Matt.Peters@windriver.com \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
--cc=eric.zhang@windriver.com \
--cc=santosh.shukla@caviumnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).