From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Spike Du <spiked@nvidia.com>,
matan@nvidia.com, viacheslavo@nvidia.com, orika@nvidia.com,
thomas@monjalon.net, Xiaoyun Li <xiaoyun.li@intel.com>,
Aman Singh <aman.deep.singh@intel.com>,
Yuying Zhang <yuying.zhang@intel.com>
Cc: stephen@networkplumber.org, mb@smartsharesystems.com,
dev@dpdk.org, rasland@nvidia.com
Subject: Re: [PATCH v5 7/7] app/testpmd: add Host Shaper command
Date: Thu, 9 Jun 2022 10:55:20 +0300 [thread overview]
Message-ID: <d60616ae-c638-839a-4093-5d8f042e6abc@oktetlabs.ru> (raw)
In-Reply-To: <20220607125942.241379-8-spiked@nvidia.com>
Since ethdev patch is factored out from the patch series the rest could
go to mlx5 maintainers.
On 6/7/22 15:59, Spike Du wrote:
> Add command line options to support host shaper configure.
> - Command syntax:
> mlx5 set port <port_id> host_shaper avail_thresh_triggered <0|1> rate
> <rate_num>
>
> - Example commands:
> To enable avail_thresh_triggered on port 1 and disable current host
> shaper:
> testpmd> mlx5 set port 1 host_shaper avail_thresh_triggered 1 rate 0
>
> To disable avail_thresh_triggered and current host shaper on port 1:
> testpmd> mlx5 set port 1 host_shaper avail_thresh_triggered 0 rate 0
>
> The rate unit is 100Mbps.
> To disable avail_thresh_triggered and configure a shaper of 5Gbps on
> port 1:
> testpmd> mlx5 set port 1 host_shaper avail_thresh_triggered 0 rate 50
>
> Add sample code to handle rxq available descriptor threshold event, it
> delays a while so that rxq empties, then disables host shaper and
> rearms available descriptor threshold event.
>
> Signed-off-by: Spike Du <spiked@nvidia.com>
[snip]
> +
> +static uint8_t host_shaper_avail_thresh_triggered[RTE_MAX_ETHPORTS];
> +#define SHAPER_DISABLE_DELAY_US 100000 /* 100ms */
> +
> +/**
> + * Disable the host shaper and re-arm available descriptor threshold event.
> + *
> + * @param[in] args
> + * uint32_t integer combining port_id and rxq_id.
> + */
> +static void
> +mlx5_test_host_shaper_disable(void *args)
> +{
> + uint32_t port_rxq_id = (uint32_t)(uintptr_t)args;
> + uint16_t port_id = port_rxq_id & 0xffff;
> + uint16_t qid = (port_rxq_id >> 16) & 0xffff;
> + struct rte_eth_rxq_info qinfo;
> +
> + printf("%s disable shaper\n", __func__);
> + if (rte_eth_rx_queue_info_get(port_id, qid, &qinfo)) {
> + printf("rx_queue_info_get returns error\n");
> + return;
> + }
> + /* Rearm the available descriptor threshold event. */
> + if (rte_eth_rx_avail_thresh_set(port_id, qid, qinfo.avail_thresh)) {
> + printf("config avail_thresh returns error\n");
> + return;
> + }
> + /* Only disable the shaper when avail_thresh_triggered is set. */
> + if (host_shaper_avail_thresh_triggered[port_id] &&
> + rte_pmd_mlx5_host_shaper_config(port_id, 0, 0))
> + printf("%s disable shaper returns error\n", __func__);
> +}
> +
> +void
> +mlx5_test_avail_thresh_event_handler(uint16_t port_id, uint16_t rxq_id)
> +{
> + uint32_t port_rxq_id = port_id | (rxq_id << 16);
Nobody guarantees here that port_id refers to an mlx5 port.
It could be any port with avail_thres support.
> +
> + rte_eal_alarm_set(SHAPER_DISABLE_DELAY_US,
> + mlx5_test_host_shaper_disable,
> + (void *)(uintptr_t)port_rxq_id);
> + printf("%s port_id:%u rxq_id:%u\n", __func__, port_id, rxq_id);
> +}
[snip]
> +cmdline_parse_token_string_t cmd_port_host_shaper_mlx5 =
> + TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
> + mlx5, "mlx5");
I think it lucks 'static' keyword (many cases below).
[snip]
next prev parent reply other threads:[~2022-06-09 7:55 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 3:22 [RFC 0/6] net/mlx5: introduce limit watermark and host shaper Spike Du
2022-04-01 3:22 ` [RFC 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-05-06 3:56 ` [RFC v1 0/7] net/mlx5: introduce limit watermark and host shaper Spike Du
2022-05-06 3:56 ` [RFC v1 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-06 3:56 ` [RFC v1 2/7] common/mlx5: share interrupt management Spike Du
2022-05-06 3:56 ` [RFC v1 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-19 9:37 ` Andrew Rybchenko
2022-05-06 3:56 ` [RFC v1 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-06 3:56 ` [RFC v1 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-06 3:56 ` [RFC v1 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-06 3:56 ` [RFC v1 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-22 5:58 ` [RFC v2 0/7] introduce per-queue limit watermark and host shaper Spike Du
2022-05-22 5:58 ` [RFC v2 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-22 5:58 ` [RFC v2 2/7] common/mlx5: share interrupt management Spike Du
2022-05-22 5:58 ` [RFC v2 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-22 15:23 ` Stephen Hemminger
2022-05-23 3:01 ` Spike Du
2022-05-23 21:45 ` Thomas Monjalon
2022-05-24 2:50 ` Spike Du
2022-05-24 8:18 ` Thomas Monjalon
2022-05-25 12:59 ` Andrew Rybchenko
2022-05-25 13:58 ` Thomas Monjalon
2022-05-25 14:23 ` Andrew Rybchenko
2022-05-23 22:54 ` Stephen Hemminger
2022-05-24 3:46 ` Spike Du
2022-05-22 15:24 ` Stephen Hemminger
2022-05-23 2:18 ` Spike Du
2022-05-23 6:07 ` Morten Brørup
2022-05-23 10:58 ` Thomas Monjalon
2022-05-23 14:10 ` Spike Du
2022-05-23 14:39 ` Thomas Monjalon
2022-05-24 6:35 ` Andrew Rybchenko
2022-05-24 9:40 ` Morten Brørup
2022-05-22 5:58 ` [RFC v2 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-22 5:58 ` [RFC v2 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-22 5:58 ` [RFC v2 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-22 5:59 ` [RFC v2 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-24 15:20 ` [PATCH v3 0/7] introduce per-queue limit watermark and host shaper Spike Du
2022-05-24 15:20 ` [PATCH v3 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-24 15:20 ` [PATCH v3 2/7] common/mlx5: share interrupt management Spike Du
2022-05-24 15:20 ` [PATCH v3 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-24 15:20 ` [PATCH v3 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-24 15:20 ` [PATCH v3 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-24 15:20 ` [PATCH v3 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-24 15:20 ` [PATCH v3 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-24 15:59 ` [PATCH v3 0/7] introduce per-queue limit watermark and host shaper Thomas Monjalon
2022-05-24 19:00 ` Morten Brørup
2022-05-24 19:22 ` Thomas Monjalon
2022-05-25 14:11 ` Andrew Rybchenko
2022-05-25 13:14 ` Spike Du
2022-05-25 13:40 ` Morten Brørup
2022-05-25 13:59 ` Spike Du
2022-05-25 14:16 ` Morten Brørup
2022-05-25 14:30 ` Andrew Rybchenko
2022-06-03 12:48 ` [PATCH v4 0/7] introduce per-queue fill threshold " Spike Du
2022-06-03 12:48 ` [PATCH v4 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-06-03 12:48 ` [PATCH v4 2/7] common/mlx5: share interrupt management Spike Du
2022-06-03 14:30 ` Ray Kinsella
2022-06-03 12:48 ` [PATCH v4 3/7] ethdev: introduce Rx queue based fill threshold Spike Du
2022-06-03 14:30 ` Ray Kinsella
2022-06-04 12:46 ` Andrew Rybchenko
2022-06-06 13:16 ` Spike Du
2022-06-06 17:15 ` Andrew Rybchenko
2022-06-06 21:30 ` Thomas Monjalon
2022-06-07 8:02 ` Andrew Rybchenko
2022-06-07 6:00 ` Spike Du
2022-06-06 15:49 ` Stephen Hemminger
2022-06-03 12:48 ` [PATCH v4 4/7] net/mlx5: add LWM event handling support Spike Du
2022-06-03 12:48 ` [PATCH v4 5/7] net/mlx5: support Rx queue based fill threshold Spike Du
2022-06-03 12:48 ` [PATCH v4 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-06-03 14:55 ` Ray Kinsella
2022-06-03 12:48 ` [PATCH v4 7/7] app/testpmd: add Host Shaper command Spike Du
2022-06-07 12:59 ` [PATCH v5 0/7] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-07 12:59 ` [PATCH v5 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-06-08 20:10 ` Matan Azrad
2022-06-07 12:59 ` [PATCH v5 2/7] common/mlx5: share interrupt management Spike Du
2022-06-07 12:59 ` [PATCH v5 3/7] ethdev: introduce Rx queue based available descriptor threshold Spike Du
2022-06-07 12:59 ` [PATCH v5 4/7] net/mlx5: add LWM event handling support Spike Du
2022-06-07 12:59 ` [PATCH v5 5/7] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-07 12:59 ` [PATCH v5 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-06-07 12:59 ` [PATCH v5 7/7] app/testpmd: add Host Shaper command Spike Du
2022-06-09 7:55 ` Andrew Rybchenko [this message]
2022-06-10 2:22 ` Spike Du
2022-06-13 2:50 ` [PATCH v6] " Spike Du
2022-06-13 2:50 ` Spike Du
2022-06-14 9:43 ` Singh, Aman Deep
2022-06-14 9:54 ` Spike Du
2022-06-14 12:01 ` [PATCH v7] " Spike Du
2022-06-14 12:01 ` Spike Du
2022-06-15 7:51 ` Matan Azrad
2022-06-15 11:08 ` Thomas Monjalon
2022-06-15 12:58 ` [PATCH v8 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-15 12:58 ` [PATCH v8 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-15 14:43 ` [PATCH v9 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-15 14:43 ` [PATCH v9 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-16 8:41 ` [PATCH v10 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-16 8:41 ` [PATCH v10 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-16 8:41 ` [PATCH v10 2/6] common/mlx5: share interrupt management Spike Du
2022-06-23 16:05 ` Ray Kinsella
2022-06-16 8:41 ` [PATCH v10 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-16 8:41 ` [PATCH v10 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-16 8:41 ` [PATCH v10 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-16 8:41 ` [PATCH v10 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-19 8:14 ` [PATCH v10 0/6] introduce per-queue available descriptor threshold and host shaper Raslan Darawsheh
2022-06-15 14:43 ` [PATCH v9 2/6] common/mlx5: share interrupt management Spike Du
2022-06-15 14:43 ` [PATCH v9 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-15 14:43 ` [PATCH v9 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-15 14:43 ` [PATCH v9 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-15 14:43 ` [PATCH v9 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-15 12:58 ` [PATCH v8 2/6] common/mlx5: share interrupt management Spike Du
2022-06-15 12:58 ` [PATCH v8 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-15 12:58 ` [PATCH v8 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-15 12:58 ` [PATCH v8 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-15 12:58 ` [PATCH v8 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-08 9:43 ` [PATCH v5 0/7] introduce per-queue available descriptor threshold and host shaper Andrew Rybchenko
2022-06-08 16:35 ` [PATCH v6] ethdev: introduce available Rx descriptors threshold Andrew Rybchenko
2022-06-08 17:22 ` Thomas Monjalon
2022-06-08 17:46 ` Thomas Monjalon
2022-06-09 0:17 ` fengchengwen
2022-06-09 7:05 ` Thomas Monjalon
2022-06-10 0:01 ` fengchengwen
2022-04-01 3:22 ` [RFC 2/6] common/mlx5: share interrupt management Spike Du
2022-04-01 3:22 ` [RFC 3/6] net/mlx5: add LWM event handling support Spike Du
2022-04-01 3:22 ` [RFC 4/6] net/mlx5: add private API to configure Rxq LWM Spike Du
2022-04-01 3:22 ` [RFC 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-04-01 3:22 ` [RFC 6/6] app/testpmd: add LWM and Host Shaper command Spike Du
2022-04-05 8:58 ` [RFC 0/6] net/mlx5: introduce limit watermark and host shaper Jerin Jacob
2022-04-26 2:42 ` Spike Du
2022-05-01 12:50 ` Jerin Jacob
2022-05-02 3:58 ` Spike Du
2022-04-29 5:48 ` Spike Du
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d60616ae-c638-839a-4093-5d8f042e6abc@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=aman.deep.singh@intel.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=mb@smartsharesystems.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=spiked@nvidia.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
--cc=xiaoyun.li@intel.com \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).