From: "Min Hu (Connor)" <humin29@huawei.com>
To: Andrew Rybchenko <arybchenko@solarflare.com>, <dev@dpdk.org>
Cc: <konstantin.ananyev@intel.com>, <thomas@monjalon.net>,
<ferruh.yigit@intel.com>, <linuxarm@huawei.com>
Subject: Re: [dpdk-dev] [PATCH V13 1/3] ethdev: introduce FEC API
Date: Mon, 28 Sep 2020 19:13:48 +0800 [thread overview]
Message-ID: <d850f0bc-a266-7840-3097-bf0962122b15@huawei.com> (raw)
In-Reply-To: <65aadb61-4798-a428-1340-83bedb252ccd@solarflare.com>
Hi, Andrew,
I have sent V14, in which I fixed it as you suggested,
please check it out,thank you.
在 2020/9/28 15:35, Andrew Rybchenko 写道:
> On 9/25/20 11:39 AM, Min Hu (Connor) wrote:
>> This patch adds Forward error correction(FEC) support for ethdev.
>> Introduce APIs which support query and config FEC information in
>> hardware.
>>
>> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
>> Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
>> Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
>> Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
>
> With few nits below:
> Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
>
>> ---
>> v12->v13:
>> change fec get capa API.
>> fix comment styles.
>>
>> ---
>> v10->v11:
>> allow to report capabilities per link speed.
>> specify what should be reported if link is down
>> when get FEC.
>> change mode to capa bitmask.
>>
>> ---
>> v9->v10:
>> add macro RTE_ETH_FEC_MODE_CAPA_MASK(x) to indicate
>> different FEC mode capa.
>>
>> ---
>> v8->v9:
>> added reviewed-by and acked-by.
>>
>> ---
>> v7->v8:
>> put AUTO just after NOFEC in rte_fec_mode definition.
>>
>> ---
>> v6->v7:
>> deleted RTE_ETH_FEC_NUM to prevent ABI breakage.
>> add new macro to indicate translation from fec mode
>> to capa.
>>
>> ---
>> v5->v6:
>> modified release notes.
>> deleted check duplicated for FEC API
>> fixed code styles according to DPDK coding style.
>> added _eth prefix.
>>
>> ---
>> v4->v5:
>> Modifies FEC capa definitions using macros.
>> Add RTE_ prefix for public FEC mode enum.
>> add release notes about FEC for dpdk20_11.
>>
>> ---
>> v2->v3:
>> add function return value "-ENOTSUP" for API.
>>
>> ---
>> doc/guides/rel_notes/release_20_11.rst | 5 ++
>> lib/librte_ethdev/rte_ethdev.c | 43 +++++++++++++++
>> lib/librte_ethdev/rte_ethdev.h | 94 ++++++++++++++++++++++++++++++++
>> lib/librte_ethdev/rte_ethdev_driver.h | 80 +++++++++++++++++++++++++++
>> lib/librte_ethdev/rte_ethdev_version.map | 3 +
>> 5 files changed, 225 insertions(+)
>>
>> diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
>> index c6642f5..1f04bd5 100644
>> --- a/doc/guides/rel_notes/release_20_11.rst
>> +++ b/doc/guides/rel_notes/release_20_11.rst
>> @@ -78,6 +78,11 @@ New Features
>> ``--portmask=N``
>> where N represents the hexadecimal bitmask of ports used.
>>
>> +* **Added the FEC API, for a generic FEC query and config.**
>> +
>> + Added the FEC API which provides functions for query FEC capabilities and
>> + current FEC mode from device. Also, API for configuring FEC mode is also provided.
>> +
>>
>> Removed Items
>> -------------
>> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
>> index dfe5c1b..86ead87 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -3679,6 +3679,49 @@ rte_eth_led_off(uint16_t port_id)
>> return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
>> }
>>
>> +int
>> +rte_eth_fec_get_capability(uint16_t port_id,
>> + struct rte_eth_fec_capa *speed_fec_capa,
>> + unsigned int num)
>> +{
>> + struct rte_eth_dev *dev;
>> + int ret;
>
> if (speed_fec_capa == NULL && num > 0)
> return -EINVAL;
>
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
>> + ret = (*dev->dev_ops->fec_get_capability)(dev, speed_fec_capa, num);
>> + if (ret > (int)num)
>> + RTE_ETHDEV_LOG(ERR, "Insufficient num, num should be no less than %d\n",
>> + ret);
>
> It is incorrect to log error, since
> num = rte_eth_fec_get_capability(port_id, NULL, 0);
> may be used to obtain required number of array elements
> (nothing bad is happening).
>
>> +
>> + return ret;
>> +}
>> +
>> +int
>> +rte_eth_fec_get(uint16_t port_id, uint32_t *mode)
>> +{
>> + struct rte_eth_dev *dev;
>> +
>> + if (mode == NULL)
>> + return -EINVAL;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, mode));
>> +}
>> +
>> +int
>> +rte_eth_fec_set(uint16_t port_id, uint32_t mode)
>> +{
>> + struct rte_eth_dev *dev;
>> +
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, mode));
>> +}
>> +
>> /*
>> * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
>> * an empty spot.
>> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
>> index 645a186..04525a8 100644
>> --- a/lib/librte_ethdev/rte_ethdev.h
>> +++ b/lib/librte_ethdev/rte_ethdev.h
>> @@ -1544,6 +1544,29 @@ struct rte_eth_dcb_info {
>> struct rte_eth_dcb_tc_queue_mapping tc_queue;
>> };
>>
>> +/**
>> + * This enum indicates the possible Forward Error Correction (FEC) modes
>> + * of an ethdev port.
>> + */
>> +enum rte_eth_fec_mode {
>> + RTE_ETH_FEC_NOFEC = 0, /**< FEC is off */
>> + RTE_ETH_FEC_AUTO, /**< FEC autonegotiation modes */
>> + RTE_ETH_FEC_BASER, /**< FEC using common algorithm */
>> + RTE_ETH_FEC_RS, /**< FEC using RS algorithm */
>> +};
>> +
>> +/* Translate from FEC mode to FEC capa */
>> +#define RTE_ETH_FEC_MODE_TO_CAPA(x) (1U << (x))
>> +
>> +/* This macro indicates FEC capa mask */
>> +#define RTE_ETH_FEC_MODE_CAPA_MASK(x) (1U << (RTE_ETH_FEC_ ## x))
>> +
>> +/* A structure used to get capabilities per link speed */
>> +struct rte_eth_fec_capa {
>> + uint32_t speed; /**< Link speed (see ETH_SPEED_NUM_*) */
>> + uint32_t capa; /**< FEC capabilities bitmask (see RTE_FEC_CAPA_*) */
>
> Thre is no RTE_FEC_CAPA_* enum/defnes any more.
> I'd just remove everything in parenthesis.
>
>> +};
>> +
>> #define RTE_ETH_ALL RTE_MAX_ETHPORTS
>>
>> /* Macros to check for valid port */
>> @@ -3397,6 +3420,77 @@ int rte_eth_led_on(uint16_t port_id);
>> int rte_eth_led_off(uint16_t port_id);
>>
>> /**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Get Forward Error Correction(FEC) capability.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param speed_fec_capa
>> + * speed_fec_capa is out only with per-speed capabilities.
>> + * If set to NULL, the function returns the required number
>> + * of required array entries.
>> + * @param num
>> + * the num is in/out with a number of elements in an array.
>
> Just (it it not in/out now):
> a number of elements in an speed_fec_capa array
>
>> + *
>> + * @return
>> + * - (0) if successful.
>
> Wrong description. Any non-negative return value is success
> (number of speed_fec_capa array elements filled in)
>
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * that operation.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + * - (-EINVAL) if *num* or *speed_fec_capa* invalid
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_get_capability(uint16_t port_id,
>> + struct rte_eth_fec_capa *speed_fec_capa,
>> + unsigned int num);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Get current Forward Error Correction(FEC) mode.
>> + * If link is down and AUTO is enabled, AUTO is returned, otherwise,
>> + * configured FEC mode is returned.
>> + * If link is up, current FEC mode is returned.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param mode
>> + * Returns the FEC mode from the device.
>> + * @return
>> + * - (0) if successful.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * that operation.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_get(uint16_t port_id, uint32_t *mode);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Set Forward Error Correction(FEC) mode.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param mode
>> + * The FEC mode.
>
> mode -> fec_capa
> A bitmask of enabled FEC modes. If AUTO bit is set, other
> bits specify FEC modes which may be negotiated. If AUTO
> bit is clear, specify FEC modes to be used (only one valid
> mode per speed may be set).
>
>> + * @return
>> + * - (0) if successful.
>> + * - (-EINVAL) if the FEC mode is not valid.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_set(uint16_t port_id, uint32_t mode);
>> +
>> +/**
>> * Get current status of the Ethernet link flow control for Ethernet device
>> *
>> * @param port_id
>> diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
>> index 23cc1e0..306f3a6 100644
>> --- a/lib/librte_ethdev/rte_ethdev_driver.h
>> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
>> @@ -575,6 +575,79 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
>> const struct rte_eth_hairpin_conf *hairpin_conf);
>>
>> /**
>> + * @internal
>> + * Get Forward Error Correction(FEC) capability.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param speed_fec_capa
>> + * speed_fec_capa is out only with per-speed capabilities.
>> + * @param num
>> + * the num is in/out with a number of elements in an array.
>
> same as above
>
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, get FEC success.
>
> same as above
>
>> + * @retval -ENOTSUP
>> + * Operation is not supported.
>> + * @retval -EIO
>> + * Device is removed.
>> + * @retval -EINVAL
>> + * *num* or *speed_fec_capa* invalid.
>> + */
>> +typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
>> + struct rte_eth_fec_capa *speed_fec_capa, unsigned int num);
>> +
>> +/**
>> + * @internal
>> + * Get Forward Error Correction(FEC) mode.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param mode
>> + * returns the FEC mode from the device.
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, get FEC success.
>> + * @retval -ENOTSUP
>> + * Operation is not supported.
>> + * @retval -EIO
>> + * Device is removed.
>> + */
>> +typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
>> + uint32_t *mode);
>> +
>> +/**
>> + * @internal
>> + * Set Forward Error Correction(FEC) mode.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param mode
>
> similar as aboe I suggest to name it fec_capa,
> since it is not a single mode
>
>> + * bitmask of allowed FEC modes. It must be only one
>> + * if AUTO is disabled. If AUTO is enabled, other
>> + * bits specify FEC modes which may be negotiated.
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, set FEC success.
>> + * @retval -ENOTSUP
>> + * Operation is not supported.
>> + * @retval -EINVAL
>> + * Unsupported FEC mode requested.
>> + * @retval -EIO
>> + * Device is removed.
>> + */
>> +typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, uint32_t mode);
>> +
>> +/**
>> * @internal A structure containing the functions exported by an Ethernet driver.
>> */
>> struct eth_dev_ops {
>> @@ -713,6 +786,13 @@ struct eth_dev_ops {
>> /**< Set up device RX hairpin queue. */
>> eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
>> /**< Set up device TX hairpin queue. */
>> +
>> + eth_fec_get_capability_t fec_get_capability;
>> + /**< Get Forward Error Correction(FEC) capability. */
>> + eth_fec_get_t fec_get;
>> + /**< Get Forward Error Correction(FEC) mode. */
>> + eth_fec_set_t fec_set;
>> + /**< Set Forward Error Correction(FEC) mode. */
>> };
>>
>> /**
>> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
>> index c95ef51..b9ace3a 100644
>> --- a/lib/librte_ethdev/rte_ethdev_version.map
>> +++ b/lib/librte_ethdev/rte_ethdev_version.map
>> @@ -229,6 +229,9 @@ EXPERIMENTAL {
>> # added in 20.11
>> rte_eth_link_speed_to_str;
>> rte_eth_link_to_str;
>> + rte_eth_fec_get_capability;
>> + rte_eth_fec_get;
>> + rte_eth_fec_set;
>> };
>>
>> INTERNAL {
>>
>
> .
>
next prev parent reply other threads:[~2020-09-28 11:14 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-28 11:32 [dpdk-dev] [RFC] ethdev: add Forward Error Correction support Min Hu(Connor)
2020-08-30 12:43 ` Andrew Rybchenko
2020-09-08 3:05 ` [dpdk-dev] [PATCH 0/3] add FEC support Min Hu (Connor)
2020-09-08 3:05 ` [dpdk-dev] [PATCH 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-09 2:42 ` [dpdk-dev] [PATCH V2 0/3] add FEC support Min Hu (Connor)
2020-09-09 2:42 ` [dpdk-dev] [PATCH V2 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-09 2:43 ` [dpdk-dev] [PATCH V2 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-09 2:43 ` [dpdk-dev] [PATCH V2 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-08 3:05 ` [dpdk-dev] [PATCH 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-08 3:05 ` [dpdk-dev] [PATCH 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 0/3] add FEC support Min Hu (Connor)
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-12 4:53 ` Ajit Khaparde
2020-09-16 14:10 ` Ananyev, Konstantin
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-10 7:24 ` [dpdk-dev] [PATCH V4 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-10 21:02 ` [dpdk-dev] [PATCH V4 0/3] add FEC support Ajit Khaparde
2020-09-11 8:39 ` humin (Connor)
2020-09-16 12:37 ` humin (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 " Min Hu (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-17 8:23 ` [dpdk-dev] [V5 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-17 8:52 ` [dpdk-dev] [V5 0/3] add FEC support Min Hu (Connor)
2020-09-17 8:52 ` [dpdk-dev] [V5 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-17 9:58 ` Andrew Rybchenko
2020-09-18 9:28 ` Min Hu (Connor)
2020-09-19 8:42 ` Andrew Rybchenko
2020-09-19 12:06 ` Min Hu (Connor)
2020-09-17 12:49 ` Ananyev, Konstantin
2020-09-18 1:57 ` humin (Connor)
2020-09-18 10:46 ` Ananyev, Konstantin
2020-09-17 8:52 ` [dpdk-dev] [V5 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-17 8:52 ` [dpdk-dev] [V5 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 0/3] add FEC support Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-18 9:04 ` [dpdk-dev] [PATCH V6 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 0/3] add FEC support Min Hu (Connor)
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-18 12:13 ` Ananyev, Konstantin
2020-09-18 18:10 ` Ajit Khaparde
2020-09-19 8:44 ` Andrew Rybchenko
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-18 11:48 ` [dpdk-dev] [PATCH V7 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-18 20:35 ` Ajit Khaparde
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 0/3] add FEC support Min Hu (Connor)
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-21 2:59 ` [dpdk-dev] [PATCH V8 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 0/3] add FEC support Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-21 13:39 ` Andrew Rybchenko
2020-09-22 4:58 ` Min Hu (Connor)
2020-09-22 8:02 ` Andrew Rybchenko
2020-09-22 11:06 ` Min Hu (Connor)
2020-09-22 12:18 ` Andrew Rybchenko
2020-09-24 11:07 ` Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-21 6:13 ` [dpdk-dev] [PATCH V9 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 0/3] add FEC support Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-22 7:26 ` [dpdk-dev] [PATCH V10 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 0/4] add FEC support Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 1/4] ethdev: introduce FEC API Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 2/4] net/hns3: support FEC Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 3/4] app/testpmd: add FEC command Min Hu (Connor)
2020-09-24 11:01 ` [dpdk-dev] [PATCH V11 4/4] doc: add FEC API and PMD information Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 0/4] add FEC support Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 1/4] ethdev: introduce FEC API Min Hu (Connor)
2020-09-24 14:46 ` Andrew Rybchenko
2020-09-25 8:47 ` Min Hu (Connor)
2020-09-25 15:36 ` Ajit Khaparde
2020-09-25 16:12 ` Stephen Hemminger
2020-09-25 16:38 ` Ferruh Yigit
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 2/4] net/hns3: support FEC Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 3/4] app/testpmd: add FEC command Min Hu (Connor)
2020-09-24 13:05 ` [dpdk-dev] [PATCH V12 4/4] doc: add FEC API and PMD information Min Hu (Connor)
2020-09-24 13:52 ` Andrew Rybchenko
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 0/3] add FEC support Min Hu (Connor)
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-28 7:35 ` Andrew Rybchenko
2020-09-28 11:13 ` Min Hu (Connor) [this message]
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-25 8:39 ` [dpdk-dev] [PATCH V13 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-27 7:08 ` [dpdk-dev] [PATCH V13 0/3] add FEC support Min Hu (Connor)
2020-09-28 10:27 ` Ferruh Yigit
2020-09-28 11:11 ` Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 " Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-28 12:48 ` Andrew Rybchenko
2020-09-29 2:09 ` Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-28 11:08 ` [dpdk-dev] [PATCH V14 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 0/3] add FEC support Min Hu (Connor)
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 1/3] ethdev: introduce FEC API Min Hu (Connor)
2020-09-29 4:18 ` Ajit Khaparde
2020-09-29 8:44 ` Min Hu (Connor)
2020-09-30 2:45 ` Min Hu (Connor)
2020-09-30 8:15 ` Thomas Monjalon
2020-09-30 9:45 ` Andrew Rybchenko
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 2/3] net/hns3: support FEC Min Hu (Connor)
2020-09-29 1:03 ` [dpdk-dev] [PATCH V15 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-09-30 16:52 ` Ferruh Yigit
2020-10-07 0:15 ` humin (Q)
2020-10-07 9:28 ` Ferruh Yigit
2020-10-07 23:38 ` humin (Q)
2020-10-08 10:06 ` Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 0/3] add FEC support Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 1/3] ethdev: introduce FEC API Min Hu (Connor)
2021-01-15 14:07 ` Ferruh Yigit
2021-01-16 2:03 ` Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 2/3] net/hns3: support FEC Min Hu (Connor)
2020-10-08 10:02 ` [dpdk-dev] [PATCH V16 3/3] app/testpmd: add FEC command Min Hu (Connor)
2020-10-08 15:57 ` Ferruh Yigit
2020-10-09 3:48 ` Min Hu (Connor)
2020-10-08 16:28 ` [dpdk-dev] [PATCH V16 0/3] add FEC support Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d850f0bc-a266-7840-3097-bf0962122b15@huawei.com \
--to=humin29@huawei.com \
--cc=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=linuxarm@huawei.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).