From: "Singh, Aman Deep" <aman.deep.singh@intel.com>
To: Junfeng Guo <junfeng.guo@intel.com>, <qi.z.zhang@intel.com>,
<jingjing.wu@intel.com>, <beilei.xing@intel.com>
Cc: <dev@dpdk.org>, Xiao Wang <xiao.w.wang@intel.com>
Subject: Re: [PATCH] testpmd: optimize forward stream statistics
Date: Wed, 1 Jun 2022 14:16:17 +0530 [thread overview]
Message-ID: <d943e50e-bfce-0405-6ae5-dc6e927d2589@intel.com> (raw)
In-Reply-To: <20220524082745.4072844-1-junfeng.guo@intel.com>
Hi Junfeng
On 5/24/2022 1:57 PM, Junfeng Guo wrote:
> 1. add throughput statistics for forward stream
> 2. display forward statistics for every forward stream
>
> Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
> ---
> app/test-pmd/testpmd.c | 41 ++++++++++++++++++++++++++++++++++++++---
> app/test-pmd/testpmd.h | 6 ++++++
> 2 files changed, 44 insertions(+), 3 deletions(-)
>
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index fe2ce19f99..076a042e77 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1926,6 +1926,8 @@ fwd_stream_stats_display(streamid_t stream_id)
> {
> struct fwd_stream *fs;
> static const char *fwd_top_stats_border = "-------";
> + uint64_t diff_pkts_rx, diff_pkts_tx, diff_cycles;
> + uint64_t pps_rx, pps_tx;
>
> fs = fwd_streams[stream_id];
> if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
> @@ -1939,6 +1941,21 @@ fwd_stream_stats_display(streamid_t stream_id)
> " TX-dropped: %-14"PRIu64,
> fs->rx_packets, fs->tx_packets, fs->fwd_dropped);
>
> + diff_pkts_rx = fs->rx_packets - fs->pre_rx;
> + diff_pkts_tx = fs->tx_packets - fs->pre_tx;
> + diff_cycles = fs->pre_cycles;
> +
> + fs->pre_rx = fs->rx_packets;
> + fs->pre_tx = fs->tx_packets;
> + fs->pre_cycles = rte_rdtsc();
> + if (diff_cycles > 0)
> + diff_cycles = fs->pre_cycles - diff_cycles;
> +
> + pps_rx = diff_cycles > 0 ?
> + (double)diff_pkts_rx * rte_get_tsc_hz() / diff_cycles : 0;
> + pps_tx = diff_cycles > 0 ?
> + (double)diff_pkts_tx * rte_get_tsc_hz() / diff_cycles : 0;
> +
> /* if checksum mode */
> if (cur_fwd_eng == &csum_fwd_engine) {
> printf(" RX- bad IP checksum: %-14"PRIu64
> @@ -1952,6 +1969,11 @@ fwd_stream_stats_display(streamid_t stream_id)
> printf("\n");
> }
>
> + printf("\n Throughput (since last show)\n");
> + printf(" Rx-pps: %12"PRIu64"\n Tx-pps: %12"PRIu64"\n", pps_rx, pps_tx);
> + fs->rx_pps = pps_rx;
> + fs->tx_pps = pps_tx;
> +
> if (record_burst_stats) {
> pkt_burst_stats_display("RX", &fs->rx_burst_stats);
> pkt_burst_stats_display("TX", &fs->tx_burst_stats);
> @@ -1979,6 +2001,8 @@ fwd_stats_display(void)
> uint64_t fwd_cycles = 0;
> uint64_t total_recv = 0;
> uint64_t total_xmit = 0;
> + uint64_t total_rx_pps = 0;
> + uint64_t total_tx_pps = 0;
> struct rte_port *port;
> streamid_t sm_id;
> portid_t pt_id;
> @@ -1989,10 +2013,9 @@ fwd_stats_display(void)
> for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
> struct fwd_stream *fs = fwd_streams[sm_id];
>
> - if (cur_fwd_config.nb_fwd_streams >
> + fwd_stream_stats_display(sm_id);
> + if (cur_fwd_config.nb_fwd_streams ==
> cur_fwd_config.nb_fwd_ports) {
> - fwd_stream_stats_display(sm_id);
> - } else {
> ports_stats[fs->tx_port].tx_stream = fs;
> ports_stats[fs->rx_port].rx_stream = fs;
> }
> @@ -2008,7 +2031,14 @@ fwd_stats_display(void)
>
> if (record_core_cycles)
> fwd_cycles += fs->core_cycles;
> +
> + total_rx_pps += fs->rx_pps;
> + total_tx_pps += fs->tx_pps;
> }
> +
> + printf("\n Total Rx-pps: %12"PRIu64" Tx-pps: %12"PRIu64"\n",
> + total_rx_pps, total_tx_pps);
> +
> for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
> pt_id = fwd_ports_ids[i];
> port = &ports[pt_id];
> @@ -2124,6 +2154,11 @@ fwd_stats_reset(void)
> fs->rx_bad_l4_csum = 0;
> fs->rx_bad_outer_l4_csum = 0;
> fs->rx_bad_outer_ip_csum = 0;
> + fs->pre_rx = 0;
> + fs->pre_tx = 0;
> + fs->pre_cycles = 0;
> + fs->rx_pps = 0;
> + fs->tx_pps = 0;
>
> memset(&fs->rx_burst_stats, 0, sizeof(fs->rx_burst_stats));
> memset(&fs->tx_burst_stats, 0, sizeof(fs->tx_burst_stats));
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 31f766c965..cad57af27e 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -155,6 +155,12 @@ struct fwd_stream {
> struct pkt_burst_stats rx_burst_stats;
> struct pkt_burst_stats tx_burst_stats;
> struct fwd_lcore *lcore; /**< Lcore being scheduled. */
> +
> + uint64_t pre_rx;
> + uint64_t pre_tx;
> + uint64_t pre_cycles;
> + uint64_t rx_pps;
> + uint64_t tx_pps;
> };
For each parameter, please add comment to describe its purpose.
Just as it is done for other parameters in the struct.
>
> /**
next prev parent reply other threads:[~2022-06-01 8:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-24 8:27 Junfeng Guo
2022-05-31 15:27 ` Andrew Rybchenko
2022-06-06 9:02 ` Guo, Junfeng
2022-06-01 8:46 ` Singh, Aman Deep [this message]
2022-06-06 9:00 ` Guo, Junfeng
2022-06-06 9:39 ` [PATCH v2] app/testpmd: add throughput stats for forward streams Junfeng Guo
2022-06-16 16:39 ` Singh, Aman Deep
2022-08-11 6:57 ` Guo, Junfeng
2022-08-16 9:32 ` Ferruh Yigit
2022-08-18 6:57 ` Guo, Junfeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d943e50e-bfce-0405-6ae5-dc6e927d2589@intel.com \
--to=aman.deep.singh@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=junfeng.guo@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).