Re: [dpdk-dev] [PATCH v3 2/6] baseband/turbo_sw: add support for CRC16

[Tom Rix <trix@redhat.com>]

On 9/7/21 6:15 PM, Nicolas Chautru wrote:
> This is to support the case for operation
> where CRC16 is to be appended or checked.
>
> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> ---
>   doc/guides/rel_notes/release_21_11.rst           |  3 +++
>   drivers/baseband/turbo_sw/bbdev_turbo_software.c | 16 ++++++++++++++++
>   2 files changed, 19 insertions(+)
>
> diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
> index 69dd518..8ca59b7 100644
> --- a/doc/guides/rel_notes/release_21_11.rst
> +++ b/doc/guides/rel_notes/release_21_11.rst
> @@ -55,6 +55,9 @@ New Features
>        Also, make sure to start the actual text at the margin.
>        =======================================================
>   
> +* **Updated the turbo_sw bbdev PMD.**
> +
> +  Added support for more comprehensive CRC options.
>   
>   Removed Items
>   -------------
> diff --git a/drivers/baseband/turbo_sw/bbdev_turbo_software.c b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
> index 77e9a2e..e1db2bf 100644
> --- a/drivers/baseband/turbo_sw/bbdev_turbo_software.c
> +++ b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
> @@ -199,6 +199,7 @@ struct turbo_sw_queue {
>   			.cap.ldpc_enc = {
>   				.capability_flags =
>   						RTE_BBDEV_LDPC_RATE_MATCH |
> +						RTE_BBDEV_LDPC_CRC_16_ATTACH |
>   						RTE_BBDEV_LDPC_CRC_24A_ATTACH |
>   						RTE_BBDEV_LDPC_CRC_24B_ATTACH,
>   				.num_buffers_src =
> @@ -211,6 +212,7 @@ struct turbo_sw_queue {
>   		.type   = RTE_BBDEV_OP_LDPC_DEC,
>   		.cap.ldpc_dec = {
>   			.capability_flags =
> +					RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK |
>   					RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK |
>   					RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |
>   					RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP |
> @@ -880,6 +882,12 @@ struct turbo_sw_queue {
>   		crc_req.len = in_length_in_bits - 24;
>   		crc_resp.data = q->enc_in;
>   		bblib_lte_crc24b_gen(&crc_req, &crc_resp);
> +	} else if (enc->op_flags & RTE_BBDEV_LDPC_CRC_16_ATTACH) {
> +		rte_memcpy(q->enc_in, in, in_length_in_bytes - 2);
> +		crc_req.data = in;
> +		crc_req.len = in_length_in_bits - 16;
> +		crc_resp.data = q->enc_in;
> +		bblib_lte_crc16_gen(&crc_req, &crc_resp);
>   	} else
>   		rte_memcpy(q->enc_in, in, in_length_in_bytes);
>   
> @@ -1491,6 +1499,14 @@ struct turbo_sw_queue {
>   			bblib_lte_crc24a_check(&crc_req, &crc_resp);
>   		if (!crc_resp.check_passed)
>   			op->status |= 1 << RTE_BBDEV_CRC_ERROR;
> +	} else if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK)) {
> +		crc_req.data = adapter_input;
> +		crc_req.len  = K - dec->n_filler - 16;
> +		crc_resp.check_passed = false;
> +		crc_resp.data = adapter_input;
> +		bblib_lte_crc16_check(&crc_req, &crc_resp);
> +		if (!crc_resp.check_passed)
> +			op->status |= 1 << RTE_BBDEV_CRC_ERROR;
>   	}

Thanks for the else-if() change.

Looks good.

Reviewed-by: Tom Rix <trix@redhat.com>

>   
>   #ifdef RTE_BBDEV_OFFLOAD_COST