DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] net/mlx5: fix match on empty VLAN item in DV mode
@ 2020-05-05 12:57 Dekel Peled
  2020-05-10 10:48 ` Raslan Darawsheh
  2020-05-11 17:19 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
  0 siblings, 2 replies; 5+ messages in thread
From: Dekel Peled @ 2020-05-05 12:57 UTC (permalink / raw)
  To: matan, viacheslavo, rasland; +Cc: dev, stable

In existing implementation, using wild card VLAN item is not allowed.
A VLAN item in flow pattern must include VLAN ID (vid) value.
This obligation contradics the intention of documentation update [1].

This patch updates the VLAN item validation and translation, to allow
wild card VLAN item, without VLAN ID value.
User guide and release notes are updated accordingly.

[1] http://patches.dpdk.org/patch/69207/

Fixes: 00f75a40576b ("net/mlx5: fix VLAN match for DV mode")
Cc: stable@dpdk.org

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 doc/guides/nics/mlx5.rst               | 18 +++++++
 doc/guides/rel_notes/release_20_05.rst |  1 +
 drivers/net/mlx5/mlx5_flow_dv.c        | 98 ++++++++++++++++++++++++++++++----
 3 files changed, 107 insertions(+), 10 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 0643592..fa93a75 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -127,6 +127,24 @@ Limitations
 
   Will match any ipv4 packet (VLAN included).
 
+- When using DV flow engine (``dv_flow_en`` = 1), flow pattern without VLAN item
+  will match untagged packets only.
+  The flow rule::
+
+        flow create 0 ingress pattern eth / ipv4 / end ...
+
+  Will match untagged packets only.
+  The flow rule::
+
+        flow create 0 ingress pattern eth / vlan / ipv4 / end ...
+
+  Will match tagged packets only, with any VLAN ID value.
+  The flow rule::
+
+        flow create 0 ingress pattern eth / vlan vid is 3 / ipv4 / end ...
+
+  Will only match tagged packets with VLAN ID 3.
+
 - VLAN pop offload command:
 
   - Flow rules having a VLAN pop offload command as one of their actions and
diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
index b90e117..60fff51 100644
--- a/doc/guides/rel_notes/release_20_05.rst
+++ b/doc/guides/rel_notes/release_20_05.rst
@@ -144,6 +144,7 @@ New Features
   * Removed flow rules caching for memory saving and compliance with ethdev API.
   * Optimized the memory consumption of flow.
   * Added support for flow aging based on hardware counter.
+  * Added support for flow pattern with wild-card VLAN item (without vid value).
 
 * **Updated the AESNI MB crypto PMD.**
 
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index aa5c353..5a0bb9d 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -1640,6 +1640,79 @@ struct field_modify_info modify_tcp[] = {
 }
 
 /**
+ * Validate VLAN item.
+ *
+ * @param[in] item
+ *   Item specification.
+ * @param[in] item_flags
+ *   Bit-fields that holds the items detected until now.
+ * @param[in] dev
+ *   Ethernet device flow is being created on.
+ * @param[out] error
+ *   Pointer to error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_vlan(const struct rte_flow_item *item,
+			   uint64_t item_flags,
+			   struct rte_eth_dev *dev,
+			   struct rte_flow_error *error)
+{
+	const struct rte_flow_item_vlan *mask = item->mask;
+	const struct rte_flow_item_vlan nic_mask = {
+		.tci = RTE_BE16(UINT16_MAX),
+		.inner_type = RTE_BE16(UINT16_MAX),
+	};
+	const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+	int ret;
+	const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+					MLX5_FLOW_LAYER_INNER_L4) :
+				       (MLX5_FLOW_LAYER_OUTER_L3 |
+					MLX5_FLOW_LAYER_OUTER_L4);
+	const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+					MLX5_FLOW_LAYER_OUTER_VLAN;
+
+	if (item_flags & vlanm)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM, item,
+					  "multiple VLAN layers not supported");
+	else if ((item_flags & l34m) != 0)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM, item,
+					  "VLAN cannot follow L3/L4 layer");
+	if (!mask)
+		mask = &rte_flow_item_vlan_mask;
+	ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+					(const uint8_t *)&nic_mask,
+					sizeof(struct rte_flow_item_vlan),
+					error);
+	if (ret)
+		return ret;
+	if (!tunnel && mask->tci != RTE_BE16(0x0fff)) {
+		struct mlx5_priv *priv = dev->data->dev_private;
+
+		if (priv->vmwa_context) {
+			/*
+			 * Non-NULL context means we have a virtual machine
+			 * and SR-IOV enabled, we have to create VLAN interface
+			 * to make hypervisor to setup E-Switch vport
+			 * context correctly. We avoid creating the multiple
+			 * VLAN interfaces, so we cannot support VLAN tag mask.
+			 */
+			return rte_flow_error_set(error, EINVAL,
+						  RTE_FLOW_ERROR_TYPE_ITEM,
+						  item,
+						  "VLAN tag mask is not"
+						  " supported in virtual"
+						  " environment");
+		}
+	}
+	return 0;
+}
+
+/**
  * Validate GTP item.
  *
  * @param[in] dev
@@ -4818,8 +4891,8 @@ struct field_modify_info modify_tcp[] = {
 			}
 			break;
 		case RTE_FLOW_ITEM_TYPE_VLAN:
-			ret = mlx5_flow_validate_item_vlan(items, item_flags,
-							   dev, error);
+			ret = flow_dv_validate_item_vlan(items, item_flags,
+							 dev, error);
 			if (ret < 0)
 				return ret;
 			last_item = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
@@ -5754,10 +5827,6 @@ struct field_modify_info modify_tcp[] = {
 	uint16_t tci_m;
 	uint16_t tci_v;
 
-	if (!vlan_v)
-		return;
-	if (!vlan_m)
-		vlan_m = &rte_flow_item_vlan_mask;
 	if (inner) {
 		headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
 					 inner_headers);
@@ -5770,13 +5839,22 @@ struct field_modify_info modify_tcp[] = {
 		 * This is workaround, masks are not supported,
 		 * and pre-validated.
 		 */
-		dev_flow->handle->vf_vlan.tag =
-			rte_be_to_cpu_16(vlan_v->tci) & 0x0fff;
+		if (vlan_v)
+			dev_flow->handle->vf_vlan.tag =
+					rte_be_to_cpu_16(vlan_v->tci) & 0x0fff;
 	}
-	tci_m = rte_be_to_cpu_16(vlan_m->tci);
-	tci_v = rte_be_to_cpu_16(vlan_m->tci & vlan_v->tci);
+	/*
+	 * When VLAN item exists in flow, mark packet as tagged,
+	 * even if TCI is not specified.
+	 */
 	MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag, 1);
 	MLX5_SET(fte_match_set_lyr_2_4, headers_v, cvlan_tag, 1);
+	if (!vlan_v)
+		return;
+	if (!vlan_m)
+		vlan_m = &rte_flow_item_vlan_mask;
+	tci_m = rte_be_to_cpu_16(vlan_m->tci);
+	tci_v = rte_be_to_cpu_16(vlan_m->tci & vlan_v->tci);
 	MLX5_SET(fte_match_set_lyr_2_4, headers_m, first_vid, tci_m);
 	MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_vid, tci_v);
 	MLX5_SET(fte_match_set_lyr_2_4, headers_m, first_cfi, tci_m >> 12);
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-05-11 20:29 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-05 12:57 [dpdk-dev] [PATCH] net/mlx5: fix match on empty VLAN item in DV mode Dekel Peled
2020-05-10 10:48 ` Raslan Darawsheh
2020-05-11 17:19 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2020-05-11 18:19   ` Dekel Peled
2020-05-11 20:29     ` Ferruh Yigit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).