From: Gaetan Rivet <gaetan.rivet@6wind.com>
To: dev@dpdk.org
Cc: "Wu, Jingjing" <jingjing.wu@intel.com>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Subject: [dpdk-dev] [PATCH v3] app/testpmd: configure event display
Date: Tue, 2 May 2017 11:54:06 +0200 [thread overview]
Message-ID: <e66396df82f96722d9cd8cf65dc4d2b6c9a9d5a7.1493718582.git.gaetan.rivet@6wind.com> (raw)
In-Reply-To: <1493708598-24306-1-git-send-email-gaetan.rivet@6wind.com>
Add two parameters to testpmd:
--print-event <event name>
--mask-event <event name>
To enable or disable to printing of events. This display is configured
on a per-event basis. By default, all except VF_MBOX are displayed.
Fixes: 76ad4a2d82d4 ("app/testpmd: add generic event handler")
Cc: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
Additionally, I'm thinking about runtime commands for events, in the form
event <name|all> show
event <name|all> print <bool>
where show could display the state of the display for this event as well
as statistics for the event. print on|off would do the same as the two
parameters introduced by this patch.
But this is a little heavier and I wanted to propose this fix as soon as
possible.
v1 -> v2:
* Rebased on top of master
* Fixed typos in doc
v2 -> v3:
* Fixed doc alignment issues.
---
app/test-pmd/parameters.c | 46 +++++++++++++++++++++++++++++++++++
app/test-pmd/testpmd.c | 13 +++++++++-
app/test-pmd/testpmd.h | 2 ++
doc/guides/testpmd_app_ug/run_app.rst | 8 ++++++
4 files changed, 68 insertions(+), 1 deletion(-)
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 787e143..5a07dea 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -206,6 +206,10 @@ usage(char* progname)
printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
printf(" --bitrate-stats=N: set the logical core N to perform "
"bit-rate calculation.\n");
+ printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv>: "
+ "enable print of designated event");
+ printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv>: "
+ "disable print of designated event");
}
#ifdef RTE_LIBRTE_CMDLINE
@@ -503,6 +507,36 @@ parse_ringnuma_config(const char *q_arg)
return 0;
}
+static int
+parse_event_printing_config(const char *optarg, int enable)
+{
+ uint32_t mask = 0;
+
+ if (!strcmp(optarg, "unknown"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
+ else if (!strcmp(optarg, "intr_lsc"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
+ else if (!strcmp(optarg, "queue_state"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
+ else if (!strcmp(optarg, "intr_reset"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
+ else if (!strcmp(optarg, "vf_mbox"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
+ else if (!strcmp(optarg, "macsec"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
+ else if (!strcmp(optarg, "intr_rmv"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
+ else {
+ fprintf(stderr, "Invalid event: %s\n", optarg);
+ return -1;
+ }
+ if (enable)
+ event_print_mask |= mask;
+ else
+ event_print_mask &= ~mask;
+ return 0;
+}
+
void
launch_args_parse(int argc, char** argv)
{
@@ -581,6 +615,8 @@ launch_args_parse(int argc, char** argv)
{ "disable-link-check", 0, 0, 0 },
{ "no-lsc-interrupt", 0, 0, 0 },
{ "no-rmv-interrupt", 0, 0, 0 },
+ { "print-event", 1, 0, 0 },
+ { "mask-event", 1, 0, 0 },
{ 0, 0, 0, 0 },
};
@@ -1036,6 +1072,16 @@ launch_args_parse(int argc, char** argv)
lsc_interrupt = 0;
if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
rmv_interrupt = 0;
+ if (!strcmp(lgopts[opt_idx].name, "print-event"))
+ if (parse_event_printing_config(optarg, 1)) {
+ rte_exit(EXIT_FAILURE,
+ "invalid print-event argument\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "mask-event"))
+ if (parse_event_printing_config(optarg, 0)) {
+ rte_exit(EXIT_FAILURE,
+ "invalid mask-event argument\n");
+ }
break;
case 'h':
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index dfe6442..b9c385e 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -282,6 +282,17 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
uint8_t rmv_interrupt = 1; /* enabled by default */
/*
+ * Display or mask ether events
+ * Default to all events except VF_MBOX
+ */
+uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
+ (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+
+/*
* NIC bypass mode configuration options.
*/
#ifdef RTE_NIC_BYPASS
@@ -1806,7 +1817,7 @@ eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
fprintf(stderr, "\nPort %" PRIu8 ": %s called upon invalid event %d\n",
port_id, __func__, type);
fflush(stderr);
- } else {
+ } else if (event_print_mask & (UINT32_C(1) << type)) {
printf("\nPort %" PRIu8 ": %s event\n", port_id,
event_desc[type]);
fflush(stdout);
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 8b3d903..3c6a59a 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -308,6 +308,8 @@ extern uint8_t no_link_check; /**<set by "--disable-link-check" parameter */
extern volatile int test_done; /* stop packet forwarding when set to 1. */
extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
+extern uint32_t event_print_mask;
+/**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
#ifdef RTE_NIC_BYPASS
extern uint32_t bypass_timeout; /**< Store the NIC bypass watchdog timeout */
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index a117354..3f2a2bd 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -477,3 +477,11 @@ The commandline options are:
* ``--bitrate-stats=N``
Set the logical core N to perform bitrate calculation.
+
+* ``--print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv>``
+
+ Enable printing the occurrence of the designated event.
+
+* ``--mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv>``
+
+ Disable printing the occurrence of the designated event.
--
2.1.4
next prev parent reply other threads:[~2017-05-02 9:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-28 10:10 [dpdk-dev] [PATCH] " Gaetan Rivet
2017-05-02 7:03 ` [dpdk-dev] [PATCH v2] " Gaetan Rivet
2017-05-02 9:40 ` Thomas Monjalon
2017-05-02 9:54 ` Gaetan Rivet [this message]
2017-05-06 0:57 ` [dpdk-dev] [PATCH v3] " Wu, Jingjing
2017-05-06 8:44 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e66396df82f96722d9cd8cf65dc4d2b6c9a9d5a7.1493718582.git.gaetan.rivet@6wind.com \
--to=gaetan.rivet@6wind.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).