From: Vasily Philipov <vasilyf@mellanox.com>
To: dev@dpdk.org
Cc: Vasily Philipov <vasilyf@mellanox.com>,
Adrien Mazarguil <adrien.mazarguil@6wind.com>,
Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Subject: [dpdk-dev] [PATCH v2 2/2] net/mlx4: support basic flow items and actions
Date: Wed, 22 Feb 2017 13:42:13 +0000 [thread overview]
Message-ID: <edd0248c4a9e756ac4138d0248b6115d4b4a90f5.1487770570.git.vasilyf@mellanox.com> (raw)
In-Reply-To: <74798f347a5b1fad28037b713ad83048c227a2ca.1487770570.git.vasilyf@mellanox.com>
In-Reply-To: <74798f347a5b1fad28037b713ad83048c227a2ca.1487685098.git.vasilyf@mellanox.com>
Adding support for the next items: eth, vlan, ipv4, udp, tcp and for the
next actions: queue, drop
---
drivers/net/mlx4/Makefile | 3 +-
drivers/net/mlx4/mlx4.c | 103 ++++-
drivers/net/mlx4/mlx4.h | 3 +
drivers/net/mlx4/mlx4_flow.c | 1053 ++++++++++++++++++++++++++++++++++++++++++
drivers/net/mlx4/mlx4_flow.h | 104 +++++
5 files changed, 1248 insertions(+), 18 deletions(-)
create mode 100644 drivers/net/mlx4/mlx4_flow.c
create mode 100644 drivers/net/mlx4/mlx4_flow.h
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
index 68c5902..1d463f7 100644
--- a/drivers/net/mlx4/Makefile
+++ b/drivers/net/mlx4/Makefile
@@ -36,6 +36,7 @@ LIB = librte_pmd_mlx4.a
# Sources.
SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4_flow.c
# Dependencies.
DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_ether
@@ -129,7 +130,7 @@ mlx4_autoconf.h: mlx4_autoconf.h.new
cmp '$<' '$@' $(AUTOCONF_OUTPUT) || \
mv '$<' '$@'
-mlx4.o: mlx4_autoconf.h
+$(SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD):.c=.o): mlx4_autoconf.h
clean_mlx4: FORCE
$Q rm -f -- mlx4_autoconf.h mlx4_autoconf.h.new
diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
index 82ccac8..e892f9c 100644
--- a/drivers/net/mlx4/mlx4.c
+++ b/drivers/net/mlx4/mlx4.c
@@ -82,12 +82,14 @@
#include <rte_log.h>
#include <rte_alarm.h>
#include <rte_memory.h>
+#include <rte_flow.h>
/* Generated configuration header. */
#include "mlx4_autoconf.h"
-/* PMD header. */
+/* PMD headers. */
#include "mlx4.h"
+#include "mlx4_flow.h"
/* Convenience macros for accessing mbuf fields. */
#define NEXT(m) ((m)->next)
@@ -2351,6 +2353,7 @@ struct txq_mp2mr_mbuf_check_data {
assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
*attr = (struct ibv_flow_attr){
.type = IBV_FLOW_ATTR_NORMAL,
+ .priority = 3,
.num_of_specs = 1,
.port = priv->port,
.flags = 0
@@ -3938,6 +3941,7 @@ struct txq_mp2mr_mbuf_check_data {
unsigned int i = 0;
unsigned int r;
struct rxq *rxq;
+ int ret;
if (mlx4_is_secondary())
return -E_RTE_SECONDARY;
@@ -3957,36 +3961,50 @@ struct txq_mp2mr_mbuf_check_data {
}
/* Iterate only once when RSS is enabled. */
do {
- int ret;
-
/* Ignore nonexistent RX queues. */
if (rxq == NULL)
continue;
ret = rxq_mac_addrs_add(rxq);
- if (!ret && priv->promisc)
+ if (ret)
+ goto err;
+ if (priv->promisc)
ret = rxq_promiscuous_enable(rxq);
- if (!ret && priv->allmulti)
+ if (ret) {
+ rxq_mac_addrs_del(rxq);
+ goto err;
+ }
+ if (priv->allmulti)
ret = rxq_allmulticast_enable(rxq);
if (!ret)
continue;
WARN("%p: QP flow attachment failed: %s",
(void *)dev, strerror(ret));
- /* Rollback. */
- while (i != 0) {
- rxq = (*priv->rxqs)[--i];
- if (rxq != NULL) {
- rxq_allmulticast_disable(rxq);
- rxq_promiscuous_disable(rxq);
- rxq_mac_addrs_del(rxq);
- }
- }
- priv->started = 0;
- priv_unlock(priv);
- return -ret;
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ goto err;
} while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
priv_dev_interrupt_handler_install(priv, dev);
+ ret = mlx4_priv_flow_start(priv);
+ if (ret) {
+ ERROR("%p: flow start failed: %s",
+ (void *)dev, strerror(ret));
+ goto err;
+ }
priv_unlock(priv);
return 0;
+err:
+ /* Rollback. */
+ while (i != 0) {
+ rxq = (*priv->rxqs)[--i];
+ if (rxq != NULL) {
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ }
+ }
+ priv->started = 0;
+ priv_unlock(priv);
+ return -ret;
}
/**
@@ -4021,6 +4039,7 @@ struct txq_mp2mr_mbuf_check_data {
rxq = (*priv->rxqs)[0];
r = priv->rxqs_n;
}
+ mlx4_priv_flow_stop(priv);
/* Iterate only once when RSS is enabled. */
do {
/* Ignore nonexistent RX queues. */
@@ -5022,6 +5041,55 @@ struct txq_mp2mr_mbuf_check_data {
return -ret;
}
+const struct rte_flow_ops mlx4_flow_ops = {
+ .validate = mlx4_flow_validate,
+ .create = mlx4_flow_create,
+ .destroy = mlx4_flow_destroy,
+ .flush = mlx4_flow_flush,
+ .query = NULL,
+};
+
+/**
+ * Manage filter operations.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param filter_type
+ * Filter type.
+ * @param filter_op
+ * Operation to perform.
+ * @param arg
+ * Pointer to operation-specific structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op,
+ void *arg)
+{
+ int ret = EINVAL;
+
+ switch (filter_type) {
+ case RTE_ETH_FILTER_GENERIC:
+ if (filter_op != RTE_ETH_FILTER_GET)
+ return -EINVAL;
+ *(const void **)arg = &mlx4_flow_ops;
+ return 0;
+ case RTE_ETH_FILTER_FDIR:
+ DEBUG("%p: filter type FDIR is not supported by this PMD",
+ (void *)dev);
+ break;
+ default:
+ ERROR("%p: filter type (%d) not supported",
+ (void *)dev, filter_type);
+ break;
+ }
+ return -ret;
+}
+
static const struct eth_dev_ops mlx4_dev_ops = {
.dev_configure = mlx4_dev_configure,
.dev_start = mlx4_dev_start,
@@ -5056,6 +5124,7 @@ struct txq_mp2mr_mbuf_check_data {
.mac_addr_add = mlx4_mac_addr_add,
.mac_addr_set = mlx4_mac_addr_set,
.mtu_set = mlx4_dev_set_mtu,
+ .filter_ctrl = mlx4_dev_filter_ctrl,
};
/**
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 70c9ecd..fac408b 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -295,6 +295,8 @@ struct txq {
struct ibv_exp_res_domain *rd; /* Resource Domain. */
};
+struct rte_flow;
+
struct priv {
struct rte_eth_dev *dev; /* Ethernet device. */
struct ibv_context *ctx; /* Verbs context. */
@@ -337,6 +339,7 @@ struct priv {
struct rxq *(*rxqs)[]; /* RX queues. */
struct txq *(*txqs)[]; /* TX queues. */
struct rte_intr_handle intr_handle; /* Interrupt handler. */
+ LIST_HEAD(mlx4_flows, rte_flow) flows;
rte_spinlock_t lock; /* Lock for control functions. */
};
diff --git a/drivers/net/mlx4/mlx4_flow.c b/drivers/net/mlx4/mlx4_flow.c
new file mode 100644
index 0000000..2328a18
--- /dev/null
+++ b/drivers/net/mlx4/mlx4_flow.c
@@ -0,0 +1,1053 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-Wpedantic"
+#endif
+#include <infiniband/verbs.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-Wpedantic"
+#endif
+
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+#include <rte_malloc.h>
+
+/* Generated configuration header. */
+#include "mlx4_autoconf.h"
+
+/* PMD headers. */
+#include "mlx4.h"
+#include "mlx4_flow.h"
+
+/** Static initializer for items. */
+#define ITEMS(...) \
+ (const enum rte_flow_item_type []){ \
+ __VA_ARGS__, RTE_FLOW_ITEM_TYPE_END, \
+ }
+
+/** Structure to generate a simple graph of layers supported by the NIC. */
+struct mlx4_flow_items {
+ /** List of possible actions for these items. */
+ const enum rte_flow_action_type *const actions;
+ /** Bit-masks corresponding to the possibilities for the item. */
+ const void *mask;
+ /**
+ * Default bit-masks to use when item->mask is not provided. When
+ * \default_mask is also NULL, the full supported bit-mask (\mask) is
+ * used instead.
+ */
+ const void *default_mask;
+ /** Bit-masks size in bytes. */
+ const unsigned int mask_sz;
+ /**
+ * Check support for a given item.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param mask[in]
+ * Bit-masks covering supported fields to compare with spec,
+ * last and mask in
+ * \item.
+ * @param size
+ * Bit-Mask size in bytes.
+ *
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+ int (*validate)(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size);
+ /**
+ * Conversion function from rte_flow to NIC specific flow.
+ *
+ * @param item
+ * rte_flow item to convert.
+ * @param default_mask
+ * Default bit-masks to use when item->mask is not provided.
+ * @param data
+ * Internal structure to store the conversion.
+ *
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+ int (*convert)(const struct rte_flow_item *item,
+ const void *default_mask,
+ void *data);
+ /** Size in bytes of the destination structure. */
+ const unsigned int dst_sz;
+ /** List of possible following items. */
+ const enum rte_flow_item_type *const items;
+};
+
+/** Valid action for this PMD. */
+static const enum rte_flow_action_type valid_actions[] = {
+ RTE_FLOW_ACTION_TYPE_DROP,
+ RTE_FLOW_ACTION_TYPE_QUEUE,
+ RTE_FLOW_ACTION_TYPE_END,
+};
+
+/**
+ * Convert Ethernet item to Verbs specification.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param default_mask[in]
+ * Default bit-masks to use when item->mask is not provided.
+ * @param data[in, out]
+ * User structure.
+ */
+static int
+mlx4_flow_create_eth(const struct rte_flow_item *item,
+ const void *default_mask,
+ void *data)
+{
+ const struct rte_flow_item_eth *spec = item->spec;
+ const struct rte_flow_item_eth *mask = item->mask;
+ struct mlx4_flow *flow = (struct mlx4_flow *)data;
+ struct ibv_flow_spec_eth *eth;
+ const unsigned int eth_size = sizeof(struct ibv_flow_spec_eth);
+ unsigned int i;
+
+ ++flow->ibv_attr->num_of_specs;
+ flow->ibv_attr->priority = 2;
+ eth = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
+ *eth = (struct ibv_flow_spec_eth) {
+ .type = IBV_FLOW_SPEC_ETH,
+ .size = eth_size,
+ };
+ if (!spec) {
+ flow->ibv_attr->type = IBV_FLOW_ATTR_ALL_DEFAULT;
+ return 0;
+ }
+ if (!mask)
+ mask = default_mask;
+ memcpy(eth->val.dst_mac, spec->dst.addr_bytes, ETHER_ADDR_LEN);
+ memcpy(eth->val.src_mac, spec->src.addr_bytes, ETHER_ADDR_LEN);
+ memcpy(eth->mask.dst_mac, mask->dst.addr_bytes, ETHER_ADDR_LEN);
+ memcpy(eth->mask.src_mac, mask->src.addr_bytes, ETHER_ADDR_LEN);
+ /* Remove unwanted bits from values. */
+ for (i = 0; i < ETHER_ADDR_LEN; ++i) {
+ eth->val.dst_mac[i] &= eth->mask.dst_mac[i];
+ eth->val.src_mac[i] &= eth->mask.src_mac[i];
+ }
+ return 0;
+}
+
+/**
+ * Convert VLAN item to Verbs specification.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param default_mask[in]
+ * Default bit-masks to use when item->mask is not provided.
+ * @param data[in, out]
+ * User structure.
+ */
+static int
+mlx4_flow_create_vlan(const struct rte_flow_item *item,
+ const void *default_mask,
+ void *data)
+{
+ const struct rte_flow_item_vlan *spec = item->spec;
+ const struct rte_flow_item_vlan *mask = item->mask;
+ struct mlx4_flow *flow = (struct mlx4_flow *)data;
+ struct ibv_flow_spec_eth *eth;
+ const unsigned int eth_size = sizeof(struct ibv_flow_spec_eth);
+
+ eth = (void *)((uintptr_t)flow->ibv_attr + flow->offset - eth_size);
+ if (!spec)
+ return 0;
+ if (!mask)
+ mask = default_mask;
+ eth->val.vlan_tag = spec->tci;
+ eth->mask.vlan_tag = mask->tci;
+ eth->val.vlan_tag &= eth->mask.vlan_tag;
+ return 0;
+}
+
+/**
+ * Convert IPv4 item to Verbs specification.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param default_mask[in]
+ * Default bit-masks to use when item->mask is not provided.
+ * @param data[in, out]
+ * User structure.
+ */
+static int
+mlx4_flow_create_ipv4(const struct rte_flow_item *item,
+ const void *default_mask,
+ void *data)
+{
+ const struct rte_flow_item_ipv4 *spec = item->spec;
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+ struct mlx4_flow *flow = (struct mlx4_flow *)data;
+ struct ibv_flow_spec_ipv4 *ipv4;
+ unsigned int ipv4_size = sizeof(struct ibv_flow_spec_ipv4);
+
+ ++flow->ibv_attr->num_of_specs;
+ flow->ibv_attr->priority = 1;
+ ipv4 = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
+ *ipv4 = (struct ibv_flow_spec_ipv4) {
+ .type = IBV_FLOW_SPEC_IPV4,
+ .size = ipv4_size,
+ };
+ if (!spec)
+ return 0;
+ ipv4->val = (struct ibv_flow_ipv4_filter) {
+ .src_ip = spec->hdr.src_addr,
+ .dst_ip = spec->hdr.dst_addr,
+ };
+ if (!mask)
+ mask = default_mask;
+ ipv4->mask = (struct ibv_flow_ipv4_filter) {
+ .src_ip = mask->hdr.src_addr,
+ .dst_ip = mask->hdr.dst_addr,
+ };
+ /* Remove unwanted bits from values. */
+ ipv4->val.src_ip &= ipv4->mask.src_ip;
+ ipv4->val.dst_ip &= ipv4->mask.dst_ip;
+ return 0;
+}
+
+/**
+ * Convert UDP item to Verbs specification.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param default_mask[in]
+ * Default bit-masks to use when item->mask is not provided.
+ * @param data[in, out]
+ * User structure.
+ */
+static int
+mlx4_flow_create_udp(const struct rte_flow_item *item,
+ const void *default_mask,
+ void *data)
+{
+ const struct rte_flow_item_udp *spec = item->spec;
+ const struct rte_flow_item_udp *mask = item->mask;
+ struct mlx4_flow *flow = (struct mlx4_flow *)data;
+ struct ibv_flow_spec_tcp_udp *udp;
+ unsigned int udp_size = sizeof(struct ibv_flow_spec_tcp_udp);
+
+ ++flow->ibv_attr->num_of_specs;
+ flow->ibv_attr->priority = 0;
+ udp = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
+ *udp = (struct ibv_flow_spec_tcp_udp) {
+ .type = IBV_FLOW_SPEC_UDP,
+ .size = udp_size,
+ };
+ if (!spec)
+ return 0;
+ udp->val.dst_port = spec->hdr.dst_port;
+ udp->val.src_port = spec->hdr.src_port;
+ if (!mask)
+ mask = default_mask;
+ udp->mask.dst_port = mask->hdr.dst_port;
+ udp->mask.src_port = mask->hdr.src_port;
+ /* Remove unwanted bits from values. */
+ udp->val.src_port &= udp->mask.src_port;
+ udp->val.dst_port &= udp->mask.dst_port;
+ return 0;
+}
+
+/**
+ * Convert TCP item to Verbs specification.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param default_mask[in]
+ * Default bit-masks to use when item->mask is not provided.
+ * @param data[in, out]
+ * User structure.
+ */
+static int
+mlx4_flow_create_tcp(const struct rte_flow_item *item,
+ const void *default_mask,
+ void *data)
+{
+ const struct rte_flow_item_tcp *spec = item->spec;
+ const struct rte_flow_item_tcp *mask = item->mask;
+ struct mlx4_flow *flow = (struct mlx4_flow *)data;
+ struct ibv_flow_spec_tcp_udp *tcp;
+ unsigned int tcp_size = sizeof(struct ibv_flow_spec_tcp_udp);
+
+ ++flow->ibv_attr->num_of_specs;
+ flow->ibv_attr->priority = 0;
+ tcp = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
+ *tcp = (struct ibv_flow_spec_tcp_udp) {
+ .type = IBV_FLOW_SPEC_TCP,
+ .size = tcp_size,
+ };
+ if (!spec)
+ return 0;
+ tcp->val.dst_port = spec->hdr.dst_port;
+ tcp->val.src_port = spec->hdr.src_port;
+ if (!mask)
+ mask = default_mask;
+ tcp->mask.dst_port = mask->hdr.dst_port;
+ tcp->mask.src_port = mask->hdr.src_port;
+ /* Remove unwanted bits from values. */
+ tcp->val.src_port &= tcp->mask.src_port;
+ tcp->val.dst_port &= tcp->mask.dst_port;
+ return 0;
+}
+
+/**
+ * Check support for a given item.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param mask[in]
+ * Bit-masks covering supported fields to compare with spec, last and mask in
+ * \item.
+ * @param size
+ * Bit-Mask size in bytes.
+ *
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+static int
+mlx4_flow_item_validate(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size)
+{
+ int ret = 0;
+
+ if (!item->spec && (item->mask || item->last))
+ return -1;
+ if (item->spec && !item->mask) {
+ unsigned int i;
+ const uint8_t *spec = item->spec;
+
+ for (i = 0; i < size; ++i)
+ if ((spec[i] | mask[i]) != mask[i])
+ return -1;
+ }
+ if (item->last && !item->mask) {
+ unsigned int i;
+ const uint8_t *spec = item->last;
+
+ for (i = 0; i < size; ++i)
+ if ((spec[i] | mask[i]) != mask[i])
+ return -1;
+ }
+ if (item->spec && item->last) {
+ uint8_t spec[size];
+ uint8_t last[size];
+ const uint8_t *apply = mask;
+ unsigned int i;
+
+ if (item->mask)
+ apply = item->mask;
+ for (i = 0; i < size; ++i) {
+ spec[i] = ((const uint8_t *)item->spec)[i] & apply[i];
+ last[i] = ((const uint8_t *)item->last)[i] & apply[i];
+ }
+ ret = memcmp(spec, last, size);
+ }
+ return ret;
+}
+
+static int
+mlx4_flow_validate_eth(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size)
+{
+ if (item->mask) {
+ const struct rte_flow_item_eth *mask = item->mask;
+
+ if (mask->dst.addr_bytes[0] != 0xff ||
+ mask->dst.addr_bytes[1] != 0xff ||
+ mask->dst.addr_bytes[2] != 0xff ||
+ mask->dst.addr_bytes[3] != 0xff ||
+ mask->dst.addr_bytes[4] != 0xff ||
+ mask->dst.addr_bytes[5] != 0xff)
+ return -1;
+ }
+ return mlx4_flow_item_validate(item, mask, size);
+}
+
+static int
+mlx4_flow_validate_vlan(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size)
+{
+ if (item->mask) {
+ const struct rte_flow_item_vlan *mask = item->mask;
+
+ if (mask->tci != 0 &&
+ ntohs(mask->tci) != 0x0fff)
+ return -1;
+ }
+ return mlx4_flow_item_validate(item, mask, size);
+}
+
+static int
+mlx4_flow_validate_ipv4(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size)
+{
+ if (item->mask) {
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+
+ if (mask->hdr.src_addr != 0 &&
+ mask->hdr.src_addr != 0xffffffff)
+ return -1;
+ if (mask->hdr.dst_addr != 0 &&
+ mask->hdr.dst_addr != 0xffffffff)
+ return -1;
+ }
+ return mlx4_flow_item_validate(item, mask, size);
+}
+
+static int
+mlx4_flow_validate_udp(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size)
+{
+ if (item->mask) {
+ const struct rte_flow_item_udp *mask = item->mask;
+
+ if (mask->hdr.src_port != 0 &&
+ mask->hdr.src_port != 0xffff)
+ return -1;
+ if (mask->hdr.dst_port != 0 &&
+ mask->hdr.dst_port != 0xffff)
+ return -1;
+ }
+ return mlx4_flow_item_validate(item, mask, size);
+}
+
+static int
+mlx4_flow_validate_tcp(const struct rte_flow_item *item,
+ const uint8_t *mask, unsigned int size)
+{
+ if (item->mask) {
+ const struct rte_flow_item_tcp *mask = item->mask;
+
+ if (mask->hdr.src_port != 0 &&
+ mask->hdr.src_port != 0xffff)
+ return -1;
+ if (mask->hdr.dst_port != 0 &&
+ mask->hdr.dst_port != 0xffff)
+ return -1;
+ }
+ return mlx4_flow_item_validate(item, mask, size);
+}
+
+/** Graph of supported items and associated actions. */
+static const struct mlx4_flow_items mlx4_flow_items[] = {
+ [RTE_FLOW_ITEM_TYPE_END] = {
+ .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH),
+ },
+ [RTE_FLOW_ITEM_TYPE_ETH] = {
+ .items = ITEMS(RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_IPV4),
+ .actions = valid_actions,
+ .mask = &(const struct rte_flow_item_eth){
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ },
+ .default_mask = &rte_flow_item_eth_mask,
+ .mask_sz = sizeof(struct rte_flow_item_eth),
+ .validate = mlx4_flow_validate_eth,
+ .convert = mlx4_flow_create_eth,
+ .dst_sz = sizeof(struct ibv_flow_spec_eth),
+ },
+ [RTE_FLOW_ITEM_TYPE_VLAN] = {
+ .items = ITEMS(RTE_FLOW_ITEM_TYPE_IPV4),
+ .actions = valid_actions,
+ .mask = &(const struct rte_flow_item_vlan){
+ /* rte_flow_item_vlan_mask is invalid for mlx4. */
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ .tci = 0x0fff,
+#else
+ .tci = 0xff0f,
+#endif
+ },
+ .mask_sz = sizeof(struct rte_flow_item_vlan),
+ .validate = mlx4_flow_validate_vlan,
+ .convert = mlx4_flow_create_vlan,
+ .dst_sz = 0,
+ },
+ [RTE_FLOW_ITEM_TYPE_IPV4] = {
+ .items = ITEMS(RTE_FLOW_ITEM_TYPE_UDP,
+ RTE_FLOW_ITEM_TYPE_TCP),
+ .actions = valid_actions,
+ .mask = &(const struct rte_flow_item_ipv4){
+ .hdr = {
+ .src_addr = -1,
+ .dst_addr = -1,
+ },
+ },
+ .default_mask = &rte_flow_item_ipv4_mask,
+ .mask_sz = sizeof(struct rte_flow_item_ipv4),
+ .validate = mlx4_flow_validate_ipv4,
+ .convert = mlx4_flow_create_ipv4,
+ .dst_sz = sizeof(struct ibv_flow_spec_ipv4),
+ },
+ [RTE_FLOW_ITEM_TYPE_UDP] = {
+ .actions = valid_actions,
+ .mask = &(const struct rte_flow_item_udp){
+ .hdr = {
+ .src_port = -1,
+ .dst_port = -1,
+ },
+ },
+ .default_mask = &rte_flow_item_udp_mask,
+ .mask_sz = sizeof(struct rte_flow_item_udp),
+ .validate = mlx4_flow_validate_udp,
+ .convert = mlx4_flow_create_udp,
+ .dst_sz = sizeof(struct ibv_flow_spec_tcp_udp),
+ },
+ [RTE_FLOW_ITEM_TYPE_TCP] = {
+ .actions = valid_actions,
+ .mask = &(const struct rte_flow_item_tcp){
+ .hdr = {
+ .src_port = -1,
+ .dst_port = -1,
+ },
+ },
+ .default_mask = &rte_flow_item_tcp_mask,
+ .mask_sz = sizeof(struct rte_flow_item_tcp),
+ .validate = mlx4_flow_validate_tcp,
+ .convert = mlx4_flow_create_tcp,
+ .dst_sz = sizeof(struct ibv_flow_spec_tcp_udp),
+ },
+};
+
+/**
+ * Validate a flow supported by the NIC.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @param[in, out] flow
+ * Flow structure to update.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+priv_flow_validate(struct priv *priv,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error,
+ struct mlx4_flow *flow)
+{
+ const struct mlx4_flow_items *cur_item = mlx4_flow_items;
+ struct mlx4_flow_action action = {
+ .queue = 0,
+ .drop = 0,
+ };
+
+ (void)priv;
+ if (attr->group) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL,
+ "groups are not supported");
+ return -rte_errno;
+ }
+ if (attr->priority) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL,
+ "priorities are not supported");
+ return -rte_errno;
+ }
+ if (attr->egress) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL,
+ "egress is not supported");
+ return -rte_errno;
+ }
+ if (!attr->ingress) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "only ingress is supported");
+ return -rte_errno;
+ }
+ /* Go over items list. */
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; ++items) {
+ const struct mlx4_flow_items *token = NULL;
+ unsigned int i;
+ int err;
+
+ if (items->type == RTE_FLOW_ITEM_TYPE_VOID)
+ continue;
+ /*
+ * The nic can support patterns with NULL eth spec only
+ * if eth is a single item in a rule.
+ */
+ if (!items->spec &&
+ items->type == RTE_FLOW_ITEM_TYPE_ETH) {
+ const struct rte_flow_item *next = items + 1;
+
+ if (next->type != RTE_FLOW_ITEM_TYPE_END) {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ items,
+ "the rule requires"
+ " an Ethernet spec");
+ return -rte_errno;
+ }
+ }
+ for (i = 0;
+ cur_item->items &&
+ cur_item->items[i] != RTE_FLOW_ITEM_TYPE_END;
+ ++i) {
+ if (cur_item->items[i] == items->type) {
+ token = &mlx4_flow_items[items->type];
+ break;
+ }
+ }
+ if (!token)
+ goto exit_item_not_supported;
+ cur_item = token;
+ err = cur_item->validate(items,
+ (const uint8_t *)cur_item->mask,
+ cur_item->mask_sz);
+ if (err)
+ goto exit_item_not_supported;
+ if (flow->ibv_attr && cur_item->convert) {
+ err = cur_item->convert(items,
+ (cur_item->default_mask ?
+ cur_item->default_mask :
+ cur_item->mask),
+ flow);
+ if (err)
+ goto exit_item_not_supported;
+ }
+ flow->offset += cur_item->dst_sz;
+ }
+ /* Go over actions list */
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; ++actions) {
+ if (actions->type == RTE_FLOW_ACTION_TYPE_VOID) {
+ continue;
+ } else if (actions->type == RTE_FLOW_ACTION_TYPE_DROP) {
+ action.drop = 1;
+ } else if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
+ const struct rte_flow_action_queue *queue =
+ (const struct rte_flow_action_queue *)
+ actions->conf;
+
+ if (!queue || (queue->index > (priv->rxqs_n - 1)))
+ goto exit_action_not_supported;
+ action.queue = 1;
+ } else {
+ goto exit_action_not_supported;
+ }
+ }
+ if (!action.queue && !action.drop) {
+ rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_HANDLE,
+ NULL, "no valid action");
+ return -rte_errno;
+ }
+ return 0;
+exit_item_not_supported:
+ rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM,
+ items, "item not supported");
+ return -rte_errno;
+exit_action_not_supported:
+ rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
+ actions, "action not supported");
+ return -rte_errno;
+}
+
+/**
+ * Validate a flow supported by the NIC.
+ *
+ * @see rte_flow_validate()
+ * @see rte_flow_ops
+ */
+int
+mlx4_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+ struct mlx4_flow flow = { .offset = sizeof(struct ibv_flow_attr) };
+
+ priv_lock(priv);
+ ret = priv_flow_validate(priv, attr, items, actions, error, &flow);
+ priv_unlock(priv);
+ return ret;
+}
+
+/**
+ * Complete flow rule creation.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param ibv_attr
+ * Verbs flow attributes.
+ * @param action
+ * Target action structure.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * A flow if the rule could be created.
+ */
+static struct rte_flow *
+priv_flow_create_action_queue(struct priv *priv,
+ struct ibv_flow_attr *ibv_attr,
+ struct mlx4_flow_action *action,
+ struct rte_flow_error *error)
+{
+ struct rxq *rxq;
+ struct ibv_qp *qp;
+ struct rte_flow *rte_flow;
+
+ assert(priv->pd);
+ assert(priv->ctx);
+ rte_flow = rte_calloc(__func__, 1, sizeof(*rte_flow), 0);
+ if (!rte_flow) {
+ rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
+ NULL, "cannot allocate flow memory");
+ return NULL;
+ }
+ rxq = (*priv->rxqs)[action->queue_id];
+ if (action->drop) {
+ rte_flow->cq =
+ ibv_exp_create_cq(priv->ctx, 1, NULL, NULL, 0,
+ &(struct ibv_exp_cq_init_attr){
+ .comp_mask = 0,
+ });
+ if (!rte_flow->cq) {
+ rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_HANDLE,
+ NULL, "cannot allocate CQ");
+ goto error;
+ }
+ rte_flow->qp = ibv_exp_create_qp(
+ priv->ctx,
+ &(struct ibv_exp_qp_init_attr){
+ .send_cq = rte_flow->cq,
+ .recv_cq = rte_flow->cq,
+ .cap = {
+ .max_recv_wr = 1,
+ .max_recv_sge = 1,
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .comp_mask =
+ IBV_EXP_QP_INIT_ATTR_PD |
+ IBV_EXP_QP_INIT_ATTR_PORT |
+ IBV_EXP_QP_INIT_ATTR_RES_DOMAIN,
+ .pd = priv->pd,
+ .res_domain = rxq->rd,
+ .port_num = priv->port,
+ });
+ if (!rte_flow->qp) {
+ rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_HANDLE,
+ NULL, "cannot allocate QP");
+ goto error;
+ }
+ qp = rte_flow->qp;
+ } else {
+ rte_flow->rxq = rxq;
+ qp = rxq->qp;
+ }
+ rte_flow->ibv_attr = ibv_attr;
+ rte_flow->ibv_flow = ibv_create_flow(qp, rte_flow->ibv_attr);
+ if (!rte_flow->ibv_flow) {
+ rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
+ NULL, "flow rule creation failure");
+ goto error;
+ }
+ return rte_flow;
+
+error:
+ assert(rte_flow);
+ if (rte_flow->cq)
+ ibv_destroy_cq(rte_flow->cq);
+ if (rte_flow->qp)
+ ibv_destroy_qp(rte_flow->qp);
+ rte_free(rte_flow->ibv_attr);
+ rte_free(rte_flow);
+ return NULL;
+}
+
+/**
+ * Convert a flow.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * A flow on success, NULL otherwise.
+ */
+static struct rte_flow *
+priv_flow_create(struct priv *priv,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct rte_flow *rte_flow;
+ struct mlx4_flow_action action;
+ struct mlx4_flow flow = { .offset = sizeof(struct ibv_flow_attr), };
+ int err;
+
+ err = priv_flow_validate(priv, attr, items, actions, error, &flow);
+ if (err)
+ return NULL;
+ flow.ibv_attr = rte_malloc(__func__, flow.offset, 0);
+ if (!flow.ibv_attr) {
+ rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
+ NULL, "cannot allocate ibv_attr memory");
+ return NULL;
+ }
+ flow.offset = sizeof(struct ibv_flow_attr);
+ *flow.ibv_attr = (struct ibv_flow_attr){
+ .comp_mask = 0,
+ .type = IBV_FLOW_ATTR_NORMAL,
+ .size = sizeof(struct ibv_flow_attr),
+ .priority = attr->priority,
+ .num_of_specs = 0,
+ .port = priv->port,
+ .flags = 0,
+ };
+ claim_zero(priv_flow_validate(priv, attr, items, actions,
+ error, &flow));
+ action = (struct mlx4_flow_action){
+ .queue = 0,
+ .drop = 0,
+ };
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; ++actions) {
+ if (actions->type == RTE_FLOW_ACTION_TYPE_VOID) {
+ continue;
+ } else if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
+ action.queue = 1;
+ action.queue_id =
+ ((const struct rte_flow_action_queue *)
+ actions->conf)->index;
+ } else if (actions->type == RTE_FLOW_ACTION_TYPE_DROP) {
+ action.drop = 1;
+ } else {
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions, "unsupported action");
+ goto exit;
+ }
+ }
+ rte_flow = priv_flow_create_action_queue(priv, flow.ibv_attr,
+ &action, error);
+ return rte_flow;
+exit:
+ rte_free(flow.ibv_attr);
+ return NULL;
+}
+
+/**
+ * Create a flow.
+ *
+ * @see rte_flow_create()
+ * @see rte_flow_ops
+ */
+struct rte_flow *
+mlx4_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rte_flow *flow;
+
+ priv_lock(priv);
+ flow = priv_flow_create(priv, attr, items, actions, error);
+ if (flow) {
+ LIST_INSERT_HEAD(&priv->flows, flow, next);
+ DEBUG("Flow created %p", (void *)flow);
+ }
+ priv_unlock(priv);
+ return flow;
+}
+
+/**
+ * Destroy a flow.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] flow
+ * Flow to destroy.
+ */
+static void
+priv_flow_destroy(struct priv *priv, struct rte_flow *flow)
+{
+ (void)priv;
+ LIST_REMOVE(flow, next);
+ if (flow->ibv_flow)
+ claim_zero(ibv_destroy_flow(flow->ibv_flow));
+ if (flow->qp)
+ claim_zero(ibv_destroy_qp(flow->qp));
+ if (flow->cq)
+ claim_zero(ibv_destroy_cq(flow->cq));
+ rte_free(flow->ibv_attr);
+ DEBUG("Flow destroyed %p", (void *)flow);
+ rte_free(flow);
+}
+
+/**
+ * Destroy a flow.
+ *
+ * @see rte_flow_destroy()
+ * @see rte_flow_ops
+ */
+int
+mlx4_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ (void)error;
+ priv_lock(priv);
+ priv_flow_destroy(priv, flow);
+ priv_unlock(priv);
+ return 0;
+}
+
+/**
+ * Destroy all flows.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_flow_flush(struct priv *priv)
+{
+ while (!LIST_EMPTY(&priv->flows)) {
+ struct rte_flow *flow;
+
+ flow = LIST_FIRST(&priv->flows);
+ priv_flow_destroy(priv, flow);
+ }
+}
+
+/**
+ * Destroy all flows.
+ *
+ * @see rte_flow_flush()
+ * @see rte_flow_ops
+ */
+int
+mlx4_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ (void)error;
+ priv_lock(priv);
+ priv_flow_flush(priv);
+ priv_unlock(priv);
+ return 0;
+}
+
+/**
+ * Remove all flows.
+ *
+ * Called by dev_stop() to remove all flows.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+void
+mlx4_priv_flow_stop(struct priv *priv)
+{
+ struct rte_flow *flow;
+
+ for (flow = LIST_FIRST(&priv->flows);
+ flow;
+ flow = LIST_NEXT(flow, next)) {
+ claim_zero(ibv_destroy_flow(flow->ibv_flow));
+ flow->ibv_flow = NULL;
+ DEBUG("Flow %p removed", (void *)flow);
+ }
+}
+
+/**
+ * Add all flows.
+ *
+ * @param priv
+ * Pointer to private structure.
+ *
+ * @return
+ * 0 on success, a errno value otherwise and rte_errno is set.
+ */
+int
+mlx4_priv_flow_start(struct priv *priv)
+{
+ struct ibv_qp *qp;
+ struct rte_flow *flow;
+
+ for (flow = LIST_FIRST(&priv->flows);
+ flow;
+ flow = LIST_NEXT(flow, next)) {
+ qp = flow->qp ? flow->qp : flow->rxq->qp;
+ flow->ibv_flow = ibv_create_flow(qp, flow->ibv_attr);
+ if (!flow->ibv_flow) {
+ DEBUG("Flow %p cannot be applied", (void *)flow);
+ rte_errno = EINVAL;
+ return rte_errno;
+ }
+ DEBUG("Flow %p applied", (void *)flow);
+ }
+ return 0;
+}
diff --git a/drivers/net/mlx4/mlx4_flow.h b/drivers/net/mlx4/mlx4_flow.h
new file mode 100644
index 0000000..537ffdf
--- /dev/null
+++ b/drivers/net/mlx4/mlx4_flow.h
@@ -0,0 +1,104 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_PMD_MLX4_FLOW_H_
+#define RTE_PMD_MLX4_FLOW_H_
+
+#include <stddef.h>
+#include <stdint.h>
+#include <sys/queue.h>
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-Wpedantic"
+#endif
+#include <infiniband/verbs.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-Wpedantic"
+#endif
+
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+#include <rte_byteorder.h>
+
+#include "mlx4.h"
+
+struct rte_flow {
+ LIST_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
+ struct rxq *rxq; /**< Pointer to the queue, NULL if drop queue. */
+ struct ibv_flow *ibv_flow; /**< Verbs flow. */
+ struct ibv_flow_attr *ibv_attr; /**< Pointer to Verbs attributes. */
+ struct ibv_qp *qp; /**< Verbs queue pair. */
+ struct ibv_cq *cq; /**< Verbs completion queue. */
+};
+
+int
+mlx4_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error);
+
+struct rte_flow *
+mlx4_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error);
+
+int
+mlx4_flow_destroy(struct rte_eth_dev *,
+ struct rte_flow *,
+ struct rte_flow_error *);
+
+int
+mlx4_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error);
+
+/** Structure to pass to the conversion function. */
+struct mlx4_flow {
+ struct ibv_flow_attr *ibv_attr; /**< Verbs attribute. */
+ unsigned int offset; /**< Offset in bytes in the ibv_attr buffer. */
+};
+
+struct mlx4_flow_action {
+ uint32_t drop:1; /**< Target is a drop queue. */
+ uint32_t queue:1; /**< Target is a receive queue. */
+ uint32_t queue_id; /**< Identifier of the queue. */
+};
+
+int mlx4_priv_flow_start(struct priv *);
+void mlx4_priv_flow_stop(struct priv *);
+
+#endif /* RTE_PMD_MLX4_FLOW_H_ */
--
1.8.3.1
next prev parent reply other threads:[~2017-02-22 13:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-21 14:07 [dpdk-dev] [PATCH 1/2] net/mlx4: split the definitions to the header file Vasily Philipov
2017-02-21 14:07 ` [dpdk-dev] [PATCH 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-02-22 8:37 ` Nélio Laranjeiro
2017-02-22 10:10 ` Nélio Laranjeiro
2017-02-22 8:37 ` [dpdk-dev] [PATCH 1/2] net/mlx4: split the definitions to the header file Nélio Laranjeiro
2017-02-22 13:42 ` [dpdk-dev] [PATCH v2 " Vasily Philipov
2017-02-22 19:04 ` Ferruh Yigit
2017-02-23 10:44 ` Vasily Philipov
2017-03-06 9:24 ` Ferruh Yigit
2017-02-22 13:42 ` Vasily Philipov [this message]
2017-03-05 7:51 ` [dpdk-dev] [PATCH v3 " Vasily Philipov
2017-03-20 9:19 ` Nélio Laranjeiro
2017-03-20 14:18 ` Ferruh Yigit
2017-03-05 7:51 ` [dpdk-dev] [PATCH v3 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-03-20 9:19 ` Nélio Laranjeiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=edd0248c4a9e756ac4138d0248b6115d4b4a90f5.1487770570.git.vasilyf@mellanox.com \
--to=vasilyf@mellanox.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=nelio.laranjeiro@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).