DPDK patches and discussions
 help / color / mirror / Atom feed
From: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v1 10/48] net/mlx4: remove allmulti and promisc support
Date: Tue,  1 Aug 2017 18:53:57 +0200	[thread overview]
Message-ID: <efe518dbfd2c32d713d621d78f7cb324d2fb97d7.1501598384.git.adrien.mazarguil@6wind.com> (raw)
In-Reply-To: <cover.1501598383.git.adrien.mazarguil@6wind.com>

This is done in preparation for a major refactoring.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
 doc/guides/nics/features/mlx4.ini |   2 -
 doc/guides/nics/mlx4.rst          |   2 -
 drivers/net/mlx4/mlx4.c           | 311 ---------------------------------
 drivers/net/mlx4/mlx4.h           |   4 -
 4 files changed, 319 deletions(-)

diff --git a/doc/guides/nics/features/mlx4.ini b/doc/guides/nics/features/mlx4.ini
index f6efd21..344731f 100644
--- a/doc/guides/nics/features/mlx4.ini
+++ b/doc/guides/nics/features/mlx4.ini
@@ -13,8 +13,6 @@ Queue start/stop     = Y
 MTU update           = Y
 Jumbo frame          = Y
 Scattered Rx         = Y
-Promiscuous mode     = Y
-Allmulticast mode    = Y
 Unicast MAC filter   = Y
 Multicast MAC filter = Y
 RSS hash             = Y
diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
index f84d56c..9559261 100644
--- a/doc/guides/nics/mlx4.rst
+++ b/doc/guides/nics/mlx4.rst
@@ -82,8 +82,6 @@ Features
   configured RX queues must be a power of two.
 - VLAN filtering is supported.
 - Link state information is provided.
-- Promiscuous mode is supported.
-- All multicast mode is supported.
 - Multiple MAC addresses (unicast, multicast) can be configured.
 - Scattered packets are supported for TX and RX.
 - Inner L3/L4 (IP, TCP and UDP) TX/RX checksum offloading and validation.
diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
index d00ddc6..fe1da04 100644
--- a/drivers/net/mlx4/mlx4.c
+++ b/drivers/net/mlx4/mlx4.c
@@ -2141,9 +2141,6 @@ rxq_mac_addrs_del(struct rxq *rxq)
 		rxq_mac_addr_del(rxq, i);
 }
 
-static int rxq_promiscuous_enable(struct rxq *);
-static void rxq_promiscuous_disable(struct rxq *);
-
 /**
  * Add single flow steering rule.
  *
@@ -2422,122 +2419,6 @@ priv_mac_addr_add(struct priv *priv, unsigned int mac_index,
 }
 
 /**
- * Enable allmulti mode in a RX queue.
- *
- * @param rxq
- *   Pointer to RX queue structure.
- *
- * @return
- *   0 on success, errno value on failure.
- */
-static int
-rxq_allmulticast_enable(struct rxq *rxq)
-{
-	struct ibv_flow *flow;
-	struct ibv_flow_attr attr = {
-		.type = IBV_FLOW_ATTR_MC_DEFAULT,
-		.num_of_specs = 0,
-		.port = rxq->priv->port,
-		.flags = 0
-	};
-
-	DEBUG("%p: enabling allmulticast mode", (void *)rxq);
-	if (rxq->allmulti_flow != NULL)
-		return EBUSY;
-	errno = 0;
-	flow = ibv_create_flow(rxq->qp, &attr);
-	if (flow == NULL) {
-		/* It's not clear whether errno is always set in this case. */
-		ERROR("%p: flow configuration failed, errno=%d: %s",
-		      (void *)rxq, errno,
-		      (errno ? strerror(errno) : "Unknown error"));
-		if (errno)
-			return errno;
-		return EINVAL;
-	}
-	rxq->allmulti_flow = flow;
-	DEBUG("%p: allmulticast mode enabled", (void *)rxq);
-	return 0;
-}
-
-/**
- * Disable allmulti mode in a RX queue.
- *
- * @param rxq
- *   Pointer to RX queue structure.
- */
-static void
-rxq_allmulticast_disable(struct rxq *rxq)
-{
-	DEBUG("%p: disabling allmulticast mode", (void *)rxq);
-	if (rxq->allmulti_flow == NULL)
-		return;
-	claim_zero(ibv_destroy_flow(rxq->allmulti_flow));
-	rxq->allmulti_flow = NULL;
-	DEBUG("%p: allmulticast mode disabled", (void *)rxq);
-}
-
-/**
- * Enable promiscuous mode in a RX queue.
- *
- * @param rxq
- *   Pointer to RX queue structure.
- *
- * @return
- *   0 on success, errno value on failure.
- */
-static int
-rxq_promiscuous_enable(struct rxq *rxq)
-{
-	struct ibv_flow *flow;
-	struct ibv_flow_attr attr = {
-		.type = IBV_FLOW_ATTR_ALL_DEFAULT,
-		.num_of_specs = 0,
-		.port = rxq->priv->port,
-		.flags = 0
-	};
-
-	if (rxq->priv->vf)
-		return 0;
-	DEBUG("%p: enabling promiscuous mode", (void *)rxq);
-	if (rxq->promisc_flow != NULL)
-		return EBUSY;
-	errno = 0;
-	flow = ibv_create_flow(rxq->qp, &attr);
-	if (flow == NULL) {
-		/* It's not clear whether errno is always set in this case. */
-		ERROR("%p: flow configuration failed, errno=%d: %s",
-		      (void *)rxq, errno,
-		      (errno ? strerror(errno) : "Unknown error"));
-		if (errno)
-			return errno;
-		return EINVAL;
-	}
-	rxq->promisc_flow = flow;
-	DEBUG("%p: promiscuous mode enabled", (void *)rxq);
-	return 0;
-}
-
-/**
- * Disable promiscuous mode in a RX queue.
- *
- * @param rxq
- *   Pointer to RX queue structure.
- */
-static void
-rxq_promiscuous_disable(struct rxq *rxq)
-{
-	if (rxq->priv->vf)
-		return;
-	DEBUG("%p: disabling promiscuous mode", (void *)rxq);
-	if (rxq->promisc_flow == NULL)
-		return;
-	claim_zero(ibv_destroy_flow(rxq->promisc_flow));
-	rxq->promisc_flow = NULL;
-	DEBUG("%p: promiscuous mode disabled", (void *)rxq);
-}
-
-/**
  * Clean up a RX queue.
  *
  * Destroy objects, free allocated memory and reset the structure for reuse.
@@ -2578,8 +2459,6 @@ rxq_cleanup(struct rxq *rxq)
 						&params));
 	}
 	if (rxq->qp != NULL && !rxq->priv->isolated) {
-		rxq_promiscuous_disable(rxq);
-		rxq_allmulticast_disable(rxq);
 		rxq_mac_addrs_del(rxq);
 	}
 	if (rxq->qp != NULL)
@@ -3222,12 +3101,8 @@ rxq_rehash(struct rte_eth_dev *dev, struct rxq *rxq)
 	}
 	/* Remove attached flows if RSS is disabled (no parent queue). */
 	if (!priv->rss && !priv->isolated) {
-		rxq_allmulticast_disable(&tmpl);
-		rxq_promiscuous_disable(&tmpl);
 		rxq_mac_addrs_del(&tmpl);
 		/* Update original queue in case of failure. */
-		rxq->allmulti_flow = tmpl.allmulti_flow;
-		rxq->promisc_flow = tmpl.promisc_flow;
 		memcpy(rxq->mac_configured, tmpl.mac_configured,
 		       sizeof(rxq->mac_configured));
 		memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
@@ -3268,13 +3143,7 @@ rxq_rehash(struct rte_eth_dev *dev, struct rxq *rxq)
 	/* Reconfigure flows. Do not care for errors. */
 	if (!priv->rss && !priv->isolated) {
 		rxq_mac_addrs_add(&tmpl);
-		if (priv->promisc)
-			rxq_promiscuous_enable(&tmpl);
-		if (priv->allmulti)
-			rxq_allmulticast_enable(&tmpl);
 		/* Update original queue in case of failure. */
-		rxq->allmulti_flow = tmpl.allmulti_flow;
-		rxq->promisc_flow = tmpl.promisc_flow;
 		memcpy(rxq->mac_configured, tmpl.mac_configured,
 		       sizeof(rxq->mac_configured));
 		memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
@@ -3817,10 +3686,6 @@ mlx4_dev_start(struct rte_eth_dev *dev)
 		if (rxq == NULL)
 			continue;
 		ret = rxq_mac_addrs_add(rxq);
-		if (!ret && priv->promisc)
-			ret = rxq_promiscuous_enable(rxq);
-		if (!ret && priv->allmulti)
-			ret = rxq_allmulticast_enable(rxq);
 		if (!ret)
 			continue;
 		WARN("%p: QP flow attachment failed: %s",
@@ -3858,8 +3723,6 @@ mlx4_dev_start(struct rte_eth_dev *dev)
 	while (i != 0) {
 		rxq = (*priv->rxqs)[i--];
 		if (rxq != NULL) {
-			rxq_allmulticast_disable(rxq);
-			rxq_promiscuous_disable(rxq);
 			rxq_mac_addrs_del(rxq);
 		}
 	}
@@ -3907,8 +3770,6 @@ mlx4_dev_stop(struct rte_eth_dev *dev)
 		/* Ignore nonexistent RX queues. */
 		if (rxq == NULL)
 			continue;
-		rxq_allmulticast_disable(rxq);
-		rxq_promiscuous_disable(rxq);
 		rxq_mac_addrs_del(rxq);
 	} while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
 	priv_unlock(priv);
@@ -4378,170 +4239,6 @@ mlx4_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
 }
 
 /**
- * DPDK callback to enable promiscuous mode.
- *
- * @param dev
- *   Pointer to Ethernet device structure.
- */
-static void
-mlx4_promiscuous_enable(struct rte_eth_dev *dev)
-{
-	struct priv *priv = dev->data->dev_private;
-	unsigned int i;
-	int ret;
-
-	priv_lock(priv);
-	if (priv->isolated) {
-		DEBUG("%p: cannot enable promiscuous, "
-		      "device is in isolated mode", (void *)dev);
-		priv_unlock(priv);
-		return;
-	}
-	if (priv->promisc) {
-		priv_unlock(priv);
-		return;
-	}
-	/* If device isn't started, this is all we need to do. */
-	if (!priv->started)
-		goto end;
-	if (priv->rss) {
-		ret = rxq_promiscuous_enable(LIST_FIRST(&priv->parents));
-		if (ret) {
-			priv_unlock(priv);
-			return;
-		}
-		goto end;
-	}
-	for (i = 0; (i != priv->rxqs_n); ++i) {
-		if ((*priv->rxqs)[i] == NULL)
-			continue;
-		ret = rxq_promiscuous_enable((*priv->rxqs)[i]);
-		if (!ret)
-			continue;
-		/* Failure, rollback. */
-		while (i != 0)
-			if ((*priv->rxqs)[--i] != NULL)
-				rxq_promiscuous_disable((*priv->rxqs)[i]);
-		priv_unlock(priv);
-		return;
-	}
-end:
-	priv->promisc = 1;
-	priv_unlock(priv);
-}
-
-/**
- * DPDK callback to disable promiscuous mode.
- *
- * @param dev
- *   Pointer to Ethernet device structure.
- */
-static void
-mlx4_promiscuous_disable(struct rte_eth_dev *dev)
-{
-	struct priv *priv = dev->data->dev_private;
-	unsigned int i;
-
-	priv_lock(priv);
-	if (!priv->promisc || priv->isolated) {
-		priv_unlock(priv);
-		return;
-	}
-	if (priv->rss) {
-		rxq_promiscuous_disable(LIST_FIRST(&priv->parents));
-		goto end;
-	}
-	for (i = 0; (i != priv->rxqs_n); ++i)
-		if ((*priv->rxqs)[i] != NULL)
-			rxq_promiscuous_disable((*priv->rxqs)[i]);
-end:
-	priv->promisc = 0;
-	priv_unlock(priv);
-}
-
-/**
- * DPDK callback to enable allmulti mode.
- *
- * @param dev
- *   Pointer to Ethernet device structure.
- */
-static void
-mlx4_allmulticast_enable(struct rte_eth_dev *dev)
-{
-	struct priv *priv = dev->data->dev_private;
-	unsigned int i;
-	int ret;
-
-	priv_lock(priv);
-	if (priv->isolated) {
-		DEBUG("%p: cannot enable allmulticast, "
-		      "device is in isolated mode", (void *)dev);
-		priv_unlock(priv);
-		return;
-	}
-	if (priv->allmulti) {
-		priv_unlock(priv);
-		return;
-	}
-	/* If device isn't started, this is all we need to do. */
-	if (!priv->started)
-		goto end;
-	if (priv->rss) {
-		ret = rxq_allmulticast_enable(LIST_FIRST(&priv->parents));
-		if (ret) {
-			priv_unlock(priv);
-			return;
-		}
-		goto end;
-	}
-	for (i = 0; (i != priv->rxqs_n); ++i) {
-		if ((*priv->rxqs)[i] == NULL)
-			continue;
-		ret = rxq_allmulticast_enable((*priv->rxqs)[i]);
-		if (!ret)
-			continue;
-		/* Failure, rollback. */
-		while (i != 0)
-			if ((*priv->rxqs)[--i] != NULL)
-				rxq_allmulticast_disable((*priv->rxqs)[i]);
-		priv_unlock(priv);
-		return;
-	}
-end:
-	priv->allmulti = 1;
-	priv_unlock(priv);
-}
-
-/**
- * DPDK callback to disable allmulti mode.
- *
- * @param dev
- *   Pointer to Ethernet device structure.
- */
-static void
-mlx4_allmulticast_disable(struct rte_eth_dev *dev)
-{
-	struct priv *priv = dev->data->dev_private;
-	unsigned int i;
-
-	priv_lock(priv);
-	if (!priv->allmulti || priv->isolated) {
-		priv_unlock(priv);
-		return;
-	}
-	if (priv->rss) {
-		rxq_allmulticast_disable(LIST_FIRST(&priv->parents));
-		goto end;
-	}
-	for (i = 0; (i != priv->rxqs_n); ++i)
-		if ((*priv->rxqs)[i] != NULL)
-			rxq_allmulticast_disable((*priv->rxqs)[i]);
-end:
-	priv->allmulti = 0;
-	priv_unlock(priv);
-}
-
-/**
  * DPDK callback to retrieve physical link information.
  *
  * @param dev
@@ -4664,10 +4361,6 @@ mlx4_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		 * for errors at this stage. */
 		if (!priv->rss && !priv->isolated) {
 			rxq_mac_addrs_add(rxq);
-			if (priv->promisc)
-				rxq_promiscuous_enable(rxq);
-			if (priv->allmulti)
-				rxq_allmulticast_enable(rxq);
 		}
 		/* Scattered burst function takes priority. */
 		if (rxq->sp)
@@ -4956,10 +4649,6 @@ static const struct eth_dev_ops mlx4_dev_ops = {
 	.dev_set_link_down = mlx4_set_link_down,
 	.dev_set_link_up = mlx4_set_link_up,
 	.dev_close = mlx4_dev_close,
-	.promiscuous_enable = mlx4_promiscuous_enable,
-	.promiscuous_disable = mlx4_promiscuous_disable,
-	.allmulticast_enable = mlx4_allmulticast_enable,
-	.allmulticast_disable = mlx4_allmulticast_disable,
 	.link_update = mlx4_link_update,
 	.stats_get = mlx4_stats_get,
 	.stats_reset = mlx4_stats_reset,
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 469ab4b..35c9549 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -204,8 +204,6 @@ struct rxq {
 	 */
 	BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
 	struct ibv_flow *mac_flow[MLX4_MAX_MAC_ADDRESSES][MLX4_MAX_VLAN_IDS];
-	struct ibv_flow *promisc_flow; /* Promiscuous flow. */
-	struct ibv_flow *allmulti_flow; /* Multicast flow. */
 	unsigned int port_id; /* Port ID for incoming packets. */
 	unsigned int elts_n; /* (*elts)[] length. */
 	unsigned int elts_head; /* Current index in (*elts)[]. */
@@ -297,8 +295,6 @@ struct priv {
 	uint16_t mtu; /* Configured MTU. */
 	uint8_t port; /* Physical port number. */
 	unsigned int started:1; /* Device started, flows enabled. */
-	unsigned int promisc:1; /* Device in promiscuous mode. */
-	unsigned int allmulti:1; /* Device receives all multicast packets. */
 	unsigned int hw_qpg:1; /* QP groups are supported. */
 	unsigned int hw_tss:1; /* TSS is supported. */
 	unsigned int hw_rss:1; /* RSS is supported. */
-- 
2.1.4

  parent reply	other threads:[~2017-08-01 16:55 UTC|newest]

Thread overview: 110+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-01 16:53 [dpdk-dev] [PATCH v1 00/48] net/mlx4: trim and refactor entire PMD Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 01/48] net/mlx4: add consistency to copyright notices Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 02/48] net/mlx4: remove limitation on number of instances Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 03/48] net/mlx4: check max number of ports dynamically Adrien Mazarguil
2017-08-01 17:35   ` Legacy, Allain
2017-08-02  7:52     ` Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 04/48] net/mlx4: remove useless compilation checks Adrien Mazarguil
2017-08-18 13:39   ` Ferruh Yigit
2017-09-01 10:19     ` Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 05/48] net/mlx4: remove secondary process support Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 06/48] net/mlx4: remove useless code Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 07/48] net/mlx4: remove soft counters compilation option Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 08/48] net/mlx4: remove scatter mode " Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 09/48] net/mlx4: remove Tx inline " Adrien Mazarguil
2017-08-01 16:53 ` Adrien Mazarguil [this message]
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 11/48] net/mlx4: remove VLAN filter support Adrien Mazarguil
2017-08-01 16:53 ` [dpdk-dev] [PATCH v1 12/48] net/mlx4: remove MAC address configuration support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 13/48] net/mlx4: drop MAC flows affecting all Rx queues Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 14/48] net/mlx4: revert flow API RSS support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 15/48] net/mlx4: revert RSS parent queue refactoring Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 16/48] net/mlx4: drop RSS support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 17/48] net/mlx4: drop checksum offloads support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 18/48] net/mlx4: drop packet type recognition support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 19/48] net/mlx4: drop scatter/gather support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 20/48] net/mlx4: drop inline receive support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 21/48] net/mlx4: use standard QP attributes Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 22/48] net/mlx4: revert resource domain support Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 23/48] net/mlx4: revert multicast echo prevention Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 24/48] net/mlx4: revert fast Verbs interface for Tx Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 25/48] net/mlx4: revert fast Verbs interface for Rx Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 26/48] net/mlx4: simplify link update function Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 27/48] net/mlx4: standardize on negative errno values Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 28/48] net/mlx4: clean up coding style inconsistencies Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 29/48] net/mlx4: remove control path locks Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 30/48] net/mlx4: remove unnecessary wrapper functions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 31/48] net/mlx4: remove mbuf macro definitions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 32/48] net/mlx4: use standard macro to get array size Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 33/48] net/mlx4: separate debugging macros Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 34/48] net/mlx4: use a single interrupt handle Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 35/48] net/mlx4: rename alarm field Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 36/48] net/mlx4: refactor interrupt FD settings Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 37/48] net/mlx4: clean up interrupt functions prototypes Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 38/48] net/mlx4: compact interrupt functions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 39/48] net/mlx4: separate interrupt handling Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 40/48] net/mlx4: separate Rx/Tx definitions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 41/48] net/mlx4: separate Rx/Tx functions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 42/48] net/mlx4: separate device control functions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 43/48] net/mlx4: separate Tx configuration functions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 44/48] net/mlx4: separate Rx " Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 45/48] net/mlx4: group flow API handlers in common file Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 46/48] net/mlx4: rename private functions in flow API Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 47/48] net/mlx4: separate memory management functions Adrien Mazarguil
2017-08-01 16:54 ` [dpdk-dev] [PATCH v1 48/48] net/mlx4: clean up includes and comments Adrien Mazarguil
2017-08-18 13:28 ` [dpdk-dev] [PATCH v1 00/48] net/mlx4: trim and refactor entire PMD Ferruh Yigit
2017-09-01  8:06 ` [dpdk-dev] [PATCH v2 00/51] " Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 01/51] net/mlx4: add consistency to copyright notices Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 02/51] net/mlx4: remove limitation on number of instances Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 03/51] net/mlx4: check max number of ports dynamically Adrien Mazarguil
2017-09-01 10:57     ` Legacy, Allain
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 04/51] net/mlx4: remove useless compilation checks Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 05/51] net/mlx4: remove secondary process support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 06/51] net/mlx4: remove useless code Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 07/51] net/mlx4: remove soft counters compilation option Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 08/51] net/mlx4: remove scatter mode " Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 09/51] net/mlx4: remove Tx inline " Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 10/51] net/mlx4: remove allmulti and promisc support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 11/51] net/mlx4: remove VLAN filter support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 12/51] net/mlx4: remove MAC address configuration support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 13/51] net/mlx4: drop MAC flows affecting all Rx queues Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 14/51] net/mlx4: revert flow API RSS support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 15/51] net/mlx4: revert RSS parent queue refactoring Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 16/51] net/mlx4: drop RSS support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 17/51] net/mlx4: drop checksum offloads support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 18/51] net/mlx4: drop packet type recognition support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 19/51] net/mlx4: drop scatter/gather support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 20/51] net/mlx4: drop inline receive support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 21/51] net/mlx4: use standard QP attributes Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 22/51] net/mlx4: revert resource domain support Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 23/51] net/mlx4: revert multicast echo prevention Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 24/51] net/mlx4: revert fast Verbs interface for Tx Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 25/51] net/mlx4: revert fast Verbs interface for Rx Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 26/51] net/mlx4: simplify Rx buffer handling Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 27/51] net/mlx4: simplify link update function Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 28/51] net/mlx4: standardize on negative errno values Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 29/51] net/mlx4: clean up coding style inconsistencies Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 30/51] net/mlx4: remove control path locks Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 31/51] net/mlx4: remove unnecessary wrapper functions Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 32/51] net/mlx4: remove mbuf macro definitions Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 33/51] net/mlx4: use standard macro to get array size Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 34/51] net/mlx4: separate debugging macros Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 35/51] net/mlx4: use a single interrupt handle Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 36/51] net/mlx4: rename alarm field Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 37/51] net/mlx4: refactor interrupt FD settings Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 38/51] net/mlx4: clean up interrupt functions prototypes Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 39/51] net/mlx4: compact interrupt functions Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 40/51] net/mlx4: separate interrupt handling Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 41/51] net/mlx4: separate Rx/Tx definitions Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 42/51] net/mlx4: separate Rx/Tx functions Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 43/51] net/mlx4: separate device control functions Adrien Mazarguil
2017-09-01  8:06   ` [dpdk-dev] [PATCH v2 44/51] net/mlx4: separate Tx configuration functions Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 45/51] net/mlx4: separate Rx " Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 46/51] net/mlx4: group flow API handlers in common file Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 47/51] net/mlx4: rename private functions in flow API Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 48/51] net/mlx4: separate memory management functions Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 49/51] net/mlx4: clean up includes and comments Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 50/51] net/mlx4: remove isolated mode constraint Adrien Mazarguil
2017-09-01  8:07   ` [dpdk-dev] [PATCH v2 51/51] net/mlx4: rely on ethdev for Tx/Rx queue arrays Adrien Mazarguil
2017-09-01 11:24   ` [dpdk-dev] [PATCH v2 00/51] net/mlx4: trim and refactor entire PMD Ferruh Yigit
2017-09-01 11:56     ` Adrien Mazarguil
2017-09-05  9:59   ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=efe518dbfd2c32d713d621d78f7cb324d2fb97d7.1501598384.git.adrien.mazarguil@6wind.com \
    --to=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).