DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>,
	Andrew Rybchenko <Andrew.Rybchenko@oktetlabs.ru>
Subject: Re: [dpdk-dev] [PATCH] examples/ethtool: fix pause configuration
Date: Sat, 17 Jul 2021 10:15:47 +0800	[thread overview]
Message-ID: <f00a70a3-bde8-3b86-24d9-1eb2e3c29438@huawei.com> (raw)
In-Reply-To: <2c9d58e1-57f1-d2ec-dc30-c12cb9ce9c67@huawei.com>

Hi, all,
	any comments?

在 2021/6/28 10:17, Min Hu (Connor) 写道:
> Hi, all,
>      any comments?
> 
> 在 2021/4/28 16:42, Min Hu (Connor) 写道:
>> From: Huisong Li <lihuisong@huawei.com>
>>
>> Currently, the pause command in ethtool to enable Rx/Tx pause has the
>> following problem. Namely, Assume that the device supports flow control
>> auto-negotiation to set pause parameters, which will the device that does
>> not support flow control auto-negotiation fails to run this command.
>>
>> This patch supports the configuration of flow control auto-negotiation
>> and fixes the print format and style of the pause cmd to make it more
>> readable.
>>
>> Fixes: bda68ab9d1e7 ("examples/ethtool: add user-space ethtool sample 
>> application")
>>
>> Signed-off-by: Huisong Li <lihuisong@huawei.com>
>> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
>> ---
>>   examples/ethtool/ethtool-app/ethapp.c | 59 
>> +++++++++++++++++++++--------------
>>   1 file changed, 36 insertions(+), 23 deletions(-)
>>
>> diff --git a/examples/ethtool/ethtool-app/ethapp.c 
>> b/examples/ethtool/ethtool-app/ethapp.c
>> index 36a1c37..057fa97 100644
>> --- a/examples/ethtool/ethtool-app/ethapp.c
>> +++ b/examples/ethtool/ethtool-app/ethapp.c
>> @@ -49,6 +49,13 @@ struct pcmd_intintint_params {
>>       uint16_t rx;
>>   };
>> +struct pcmd_pause_params {
>> +    cmdline_fixed_string_t cmd;
>> +    uint16_t port;
>> +    cmdline_fixed_string_t mode;
>> +    cmdline_fixed_string_t autoneg;
>> +    cmdline_fixed_string_t an_status;
>> +};
>>   /* Parameter-less commands */
>>   cmdline_parse_token_string_t pcmd_quit_token_cmd =
>> @@ -116,12 +123,18 @@ cmdline_parse_token_num_t pcmd_intintint_token_rx =
>>   /* Pause commands */
>>   cmdline_parse_token_string_t pcmd_pause_token_cmd =
>> -    TOKEN_STRING_INITIALIZER(struct pcmd_intstr_params, cmd, "pause");
>> +    TOKEN_STRING_INITIALIZER(struct pcmd_pause_params, cmd, "pause");
>>   cmdline_parse_token_num_t pcmd_pause_token_port =
>> -    TOKEN_NUM_INITIALIZER(struct pcmd_intstr_params, port, RTE_UINT16);
>> -cmdline_parse_token_string_t pcmd_pause_token_opt =
>> -    TOKEN_STRING_INITIALIZER(struct pcmd_intstr_params,
>> -        opt, "all#tx#rx#none");
>> +    TOKEN_NUM_INITIALIZER(struct pcmd_pause_params, port, RTE_UINT16);
>> +cmdline_parse_token_string_t pcmd_pause_token_mode =
>> +    TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
>> +        mode, "full#tx#rx#none");
>> +cmdline_parse_token_string_t pcmd_pause_token_autoneg =
>> +    TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
>> +        autoneg, "autoneg");
>> +cmdline_parse_token_string_t pcmd_pause_token_an_status =
>> +    TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
>> +        an_status, "on#off");
>>   /* VLAN commands */
>>   cmdline_parse_token_string_t pcmd_vlan_token_cmd =
>> @@ -348,13 +361,12 @@ pcmd_module_eeprom_callback(void *ptr_params,
>>       fclose(fp_eeprom);
>>   }
>> -
>>   static void
>>   pcmd_pause_callback(void *ptr_params,
>>       __rte_unused struct cmdline *ctx,
>>       void *ptr_data)
>>   {
>> -    struct pcmd_intstr_params *params = ptr_params;
>> +    struct pcmd_pause_params *params = ptr_params;
>>       struct ethtool_pauseparam info;
>>       int stat;
>> @@ -366,39 +378,38 @@ pcmd_pause_callback(void *ptr_params,
>>           stat = rte_ethtool_get_pauseparam(params->port, &info);
>>       } else {
>>           memset(&info, 0, sizeof(info));
>> -        if (strcasecmp("all", params->opt) == 0) {
>> +        if (strcasecmp("full", params->mode) == 0) {
>>               info.tx_pause = 1;
>>               info.rx_pause = 1;
>> -        } else if (strcasecmp("tx", params->opt) == 0) {
>> +        } else if (strcasecmp("tx", params->mode) == 0) {
>>               info.tx_pause = 1;
>>               info.rx_pause = 0;
>> -        } else if (strcasecmp("rx", params->opt) == 0) {
>> +        } else if (strcasecmp("rx", params->mode) == 0) {
>>               info.tx_pause = 0;
>>               info.rx_pause = 1;
>>           } else {
>>               info.tx_pause = 0;
>>               info.rx_pause = 0;
>>           }
>> -        /* Assume auto-negotiation wanted */
>> -        info.autoneg = 1;
>> +
>> +        if (strcasecmp("on", params->an_status) == 0)
>> +            info.autoneg = 1;
>> +        else
>> +            info.autoneg = 0;
>> +
>>           stat = rte_ethtool_set_pauseparam(params->port, &info);
>>       }
>>       if (stat == 0) {
>> -        if (info.rx_pause && info.tx_pause)
>> -            printf("Port %i: Tx & Rx Paused\n", params->port);
>> -        else if (info.rx_pause)
>> -            printf("Port %i: Rx Paused\n", params->port);
>> -        else if (info.tx_pause)
>> -            printf("Port %i: Tx Paused\n", params->port);
>> -        else
>> -            printf("Port %i: Tx & Rx not paused\n", params->port);
>> +        printf("Pause parameters for Port %i:\n", params->port);
>> +        printf("Rx pause: %s\n", info.rx_pause ? "on" : "off");
>> +        printf("Tx pause: %s\n", info.tx_pause ? "on" : "off");
>> +        printf("Autoneg: %s\n", info.autoneg ? "on" : "off");
>>       } else if (stat == -ENOTSUP)
>>           printf("Port %i: Operation not supported\n", params->port);
>>       else
>>           printf("Port %i: Error %i\n", params->port, stat);
>>   }
>> -
>>   static void
>>   pcmd_open_callback(__rte_unused void *ptr_params,
>>       __rte_unused struct cmdline *ctx,
>> @@ -741,11 +752,13 @@ cmdline_parse_inst_t pcmd_pause = {
>>       .f = pcmd_pause_callback,
>>       .data = NULL,
>>       .help_str =
>> -        "pause <port_id> <all|tx|rx|none>\n     Pause/unpause port",
>> +        "pause <port_id> <full|tx|rx|none> autoneg <on|off>\n     
>> Pause/unpause port",
>>       .tokens = {
>>           (void *)&pcmd_pause_token_cmd,
>>           (void *)&pcmd_pause_token_port,
>> -        (void *)&pcmd_pause_token_opt,
>> +        (void *)&pcmd_pause_token_mode,
>> +        (void *)&pcmd_pause_token_autoneg,
>> +        (void *)&pcmd_pause_token_an_status,
>>           NULL
>>       },
>>   };
>>
> .

  reply	other threads:[~2021-07-17  2:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-28  8:42 Min Hu (Connor)
2021-06-28  2:17 ` Min Hu (Connor)
2021-07-17  2:15   ` Min Hu (Connor) [this message]
2021-09-28  1:20     ` Min Hu (Connor)
2023-07-03 23:19 ` Stephen Hemminger
2023-11-10  3:30 ` [PATCH v2] " Huisong Li
2023-11-22 22:50   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f00a70a3-bde8-3b86-24d9-1eb2e3c29438@huawei.com \
    --to=humin29@huawei.com \
    --cc=Andrew.Rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).