[PATCH 5/5] net/cxgbe: read firmware configuration file from filesystem

[Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>]

Add support to read firmware configuration file from
/lib/firmware/cxgb4/ path in the filesystem.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
---
 drivers/net/cxgbe/base/t4fw_interface.h |   1 +
 drivers/net/cxgbe/cxgbe_main.c          | 329 ++++++++++++++++--------
 2 files changed, 217 insertions(+), 113 deletions(-)

diff --git a/drivers/net/cxgbe/base/t4fw_interface.h b/drivers/net/cxgbe/base/t4fw_interface.h
index a0a9292c0c..76f58d7c77 100644
--- a/drivers/net/cxgbe/base/t4fw_interface.h
+++ b/drivers/net/cxgbe/base/t4fw_interface.h
@@ -697,6 +697,7 @@ enum fw_params_param_dev {
 						 */
 	FW_PARAMS_PARAM_DEV_FWREV	= 0x0B, /* fw version */
 	FW_PARAMS_PARAM_DEV_TPREV	= 0x0C, /* tp version */
+	FW_PARAMS_PARAM_DEV_CF		= 0x0D,
 	FW_PARAMS_PARAM_DEV_ULPTX_MEMWRITE_DSGL = 0x17,
 	FW_PARAMS_PARAM_DEV_FILTER2_WR	= 0x1D,
 	FW_PARAMS_PARAM_DEV_OPAQUE_VIID_SMT_EXTN = 0x27,
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index e2a2ccb781..7b162af3e7 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -4,6 +4,7 @@
  */
 
 #include <sys/queue.h>
+#include <sys/stat.h>
 #include <stdio.h>
 #include <errno.h>
 #include <stdint.h>
@@ -11,6 +12,7 @@
 #include <unistd.h>
 #include <stdarg.h>
 #include <inttypes.h>
+#include <fcntl.h>
 #include <netinet/in.h>
 
 #include <rte_byteorder.h>
@@ -1006,6 +1008,218 @@ static int configure_filter_mode_mask(struct adapter *adap)
 			     params, val);
 }
 
+#define CXGBE_FW_CONFIG_PATH_T5 "/lib/firmware/cxgb4/t5-config.txt"
+#define CXGBE_FW_CONFIG_PATH_T6 "/lib/firmware/cxgb4/t6-config.txt"
+
+/*
+ * Load firmware configuration from file in /lib/firmware/cxgb4/ path,
+ * if it is present.
+ */
+static int cxgbe_load_fw_config_from_filesystem(struct adapter *adap,
+						const char **config_name,
+						u32 *mem_type, u32 *mem_addr)
+{
+	u32 param, val, mtype, maddr;
+	const char *fw_cfg_path;
+	char *fw_cfg = NULL;
+	struct stat st;
+	int ret, fd;
+
+	switch (CHELSIO_CHIP_VERSION(adap->params.chip)) {
+	case CHELSIO_T5:
+		fw_cfg_path = CXGBE_FW_CONFIG_PATH_T5;
+		break;
+	case CHELSIO_T6:
+		fw_cfg_path = CXGBE_FW_CONFIG_PATH_T6;
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	ret = open(fw_cfg_path, O_RDONLY);
+	if (ret < 0) {
+		dev_debug(adap, "Couldn't open FW config file\n");
+		return ret;
+	}
+
+	fd = ret;
+
+	ret = fstat(fd, &st);
+	if (ret < 0) {
+		dev_debug(adap, "Couldn't get FW config file size\n");
+		goto out_err;
+	}
+
+	if (st.st_size >= FLASH_CFG_MAX_SIZE) {
+		dev_debug(adap, "FW config file size >= max(%u)\n",
+			  FLASH_CFG_MAX_SIZE);
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	fw_cfg = rte_zmalloc(NULL, st.st_size, 0);
+	if (fw_cfg == NULL) {
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	if (read(fd, fw_cfg, st.st_size) != st.st_size) {
+		dev_debug(adap, "Couldn't read FW config file data\n");
+		ret = -EIO;
+		goto out_err;
+	}
+
+	close(fd);
+
+	/* Send it to FW to verify and update to new configuration */
+	param = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+		V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF);
+	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
+	if (ret < 0) {
+		dev_debug(adap, "FW config param query failed: %d\n", ret);
+		goto out_free;
+	}
+
+	mtype = val >> 8;
+	maddr = (val & 0xff) << 16;
+
+	t4_os_lock(&adap->win0_lock);
+	ret = t4_memory_rw(adap, MEMWIN_NIC, mtype, maddr, st.st_size,
+			   fw_cfg, T4_MEMORY_WRITE);
+	t4_os_unlock(&adap->win0_lock);
+	if (ret < 0) {
+		dev_debug(adap, "FW config file update failed: %d\n", ret);
+		goto out_free;
+	}
+
+	rte_free(fw_cfg);
+
+	*mem_type = mtype;
+	*mem_addr = maddr;
+	*config_name = fw_cfg_path;
+	return 0;
+
+out_err:
+	close(fd);
+out_free:
+	rte_free(fw_cfg);
+	return ret;
+}
+
+static int cxgbe_load_fw_config(struct adapter *adap)
+{
+	u32 finiver, finicsum, cfcsum, mtype, maddr, param, val;
+	struct fw_caps_config_cmd caps_cmd = { 0 };
+	const char *config_name = NULL;
+	int ret;
+
+	ret = cxgbe_load_fw_config_from_filesystem(adap, &config_name,
+						   &mtype, &maddr);
+	if (ret < 0) {
+		config_name = "On Flash";
+
+		ret = t4_flash_cfg_addr(adap);
+		if (ret < 0) {
+			dev_warn(adap,
+				 "Finding address for FW config file in flash failed: %d\n",
+				 ret);
+			goto out_default_config;
+		}
+
+		mtype = FW_MEMTYPE_CF_FLASH;
+		maddr = ret;
+	}
+
+	/* Enable HASH filter region when support is available. */
+	val = 1;
+	param = CXGBE_FW_PARAM_DEV(HASHFILTER_WITH_OFLD);
+	t4_set_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
+
+	/*
+	 * Issue a Capability Configuration command to the firmware to get it
+	 * to parse the Configuration File.
+	 */
+	caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+					   F_FW_CMD_REQUEST | F_FW_CMD_READ);
+	caps_cmd.cfvalid_to_len16 =
+		cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID |
+			    V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
+			    V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
+			    FW_LEN16(caps_cmd));
+	ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
+			 &caps_cmd);
+
+out_default_config:
+	/*
+	 * If the CAPS_CONFIG failed with an ENOENT (for a Firmware
+	 * Configuration File in filesystem or FLASH), our last gasp
+	 * effort is to use the Firmware Configuration File which is
+	 * embedded in the firmware.
+	 */
+	if (ret == -ENOENT) {
+		config_name = "Firmware Default";
+
+		memset(&caps_cmd, 0, sizeof(caps_cmd));
+		caps_cmd.op_to_write =
+			cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+				    F_FW_CMD_REQUEST | F_FW_CMD_READ);
+		caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd));
+		ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
+				 &caps_cmd);
+	}
+
+	if (ret < 0) {
+		dev_info(adap,
+			 "Failed to configure using %s Firmware Configuration file: %d\n",
+			 config_name, ret);
+		return ret;
+	}
+
+	finiver = be32_to_cpu(caps_cmd.finiver);
+	finicsum = be32_to_cpu(caps_cmd.finicsum);
+	cfcsum = be32_to_cpu(caps_cmd.cfcsum);
+	if (finicsum != cfcsum)
+		dev_warn(adap,
+			 "Configuration File checksum mismatch: [fini] csum=0x%x, computed csum=0x%x\n",
+			 finicsum, cfcsum);
+
+	/*
+	 * If we're a pure NIC driver then disable all offloading facilities.
+	 * This will allow the firmware to optimize aspects of the hardware
+	 * configuration which will result in improved performance.
+	 */
+	caps_cmd.niccaps &= cpu_to_be16(~FW_CAPS_CONFIG_NIC_ETHOFLD);
+	caps_cmd.toecaps = 0;
+	caps_cmd.iscsicaps = 0;
+	caps_cmd.rdmacaps = 0;
+	caps_cmd.fcoecaps = 0;
+	caps_cmd.cryptocaps = 0;
+
+	/*
+	 * And now tell the firmware to use the configuration we just loaded.
+	 */
+	caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+					   F_FW_CMD_REQUEST | F_FW_CMD_WRITE);
+	caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
+	ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
+			 NULL);
+	if (ret < 0) {
+		dev_warn(adap, "Unable to finalize Firmware Capabilities %d\n",
+			 ret);
+		return ret;
+	}
+
+	/*
+	 * Return successfully and note that we're operating with parameters
+	 * not supplied by the driver, rather than from hard-wired
+	 * initialization constants buried in the driver.
+	 */
+	dev_info(adap,
+		 "Successfully configured using Firmware Configuration File \"%s\", version: 0x%x, computed csum: 0x%x\n",
+		 config_name, finiver, cfcsum);
+	return 0;
+}
+
 static void configure_pcie_ext_tag(struct adapter *adapter)
 {
 	u16 v;
@@ -1119,12 +1333,7 @@ static int adap_init0_tweaks(struct adapter *adapter)
  */
 static int adap_init0_config(struct adapter *adapter, int reset)
 {
-	u32 finiver, finicsum, cfcsum, param, val;
-	struct fw_caps_config_cmd caps_cmd;
-	unsigned long mtype = 0, maddr = 0;
-	u8 config_issued = 0;
-	char config_name[20];
-	int cfg_addr, ret;
+	int ret;
 
 	/*
 	 * Reset device if necessary.
@@ -1139,98 +1348,10 @@ static int adap_init0_config(struct adapter *adapter, int reset)
 		}
 	}
 
-	cfg_addr = t4_flash_cfg_addr(adapter);
-	if (cfg_addr < 0) {
-		ret = cfg_addr;
-		dev_warn(adapter, "Finding address for firmware config file in flash failed, error %d\n",
-			 -ret);
-		goto bye;
-	}
-
-	strcpy(config_name, "On Flash");
-	mtype = FW_MEMTYPE_CF_FLASH;
-	maddr = cfg_addr;
-
-	/* Enable HASH filter region when support is available. */
-	val = 1;
-	param = CXGBE_FW_PARAM_DEV(HASHFILTER_WITH_OFLD);
-	t4_set_params(adapter, adapter->mbox, adapter->pf, 0, 1,
-		      &param, &val);
-
-	/*
-	 * Issue a Capability Configuration command to the firmware to get it
-	 * to parse the Configuration File.  We don't use t4_fw_config_file()
-	 * because we want the ability to modify various features after we've
-	 * processed the configuration file ...
-	 */
-	memset(&caps_cmd, 0, sizeof(caps_cmd));
-	caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
-					   F_FW_CMD_REQUEST | F_FW_CMD_READ);
-	caps_cmd.cfvalid_to_len16 =
-		cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID |
-			    V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
-			    V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
-			    FW_LEN16(caps_cmd));
-	ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
-			 &caps_cmd);
-	/*
-	 * If the CAPS_CONFIG failed with an ENOENT (for a Firmware
-	 * Configuration File in FLASH), our last gasp effort is to use the
-	 * Firmware Configuration File which is embedded in the firmware.  A
-	 * very few early versions of the firmware didn't have one embedded
-	 * but we can ignore those.
-	 */
-	if (ret == -ENOENT) {
-		dev_info(adapter, "%s: Going for embedded config in firmware..\n",
-			 __func__);
-
-		memset(&caps_cmd, 0, sizeof(caps_cmd));
-		caps_cmd.op_to_write =
-			cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
-				    F_FW_CMD_REQUEST | F_FW_CMD_READ);
-		caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd));
-		ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd,
-				 sizeof(caps_cmd), &caps_cmd);
-		strcpy(config_name, "Firmware Default");
-	}
-
-	config_issued = 1;
+	ret = cxgbe_load_fw_config(adapter);
 	if (ret < 0)
 		goto bye;
 
-	finiver = be32_to_cpu(caps_cmd.finiver);
-	finicsum = be32_to_cpu(caps_cmd.finicsum);
-	cfcsum = be32_to_cpu(caps_cmd.cfcsum);
-	if (finicsum != cfcsum)
-		dev_warn(adapter, "Configuration File checksum mismatch: [fini] csum=%#x, computed csum=%#x\n",
-			 finicsum, cfcsum);
-
-	/*
-	 * If we're a pure NIC driver then disable all offloading facilities.
-	 * This will allow the firmware to optimize aspects of the hardware
-	 * configuration which will result in improved performance.
-	 */
-	caps_cmd.niccaps &= cpu_to_be16(~FW_CAPS_CONFIG_NIC_ETHOFLD);
-	caps_cmd.toecaps = 0;
-	caps_cmd.iscsicaps = 0;
-	caps_cmd.rdmacaps = 0;
-	caps_cmd.fcoecaps = 0;
-	caps_cmd.cryptocaps = 0;
-
-	/*
-	 * And now tell the firmware to use the configuration we just loaded.
-	 */
-	caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
-					   F_FW_CMD_REQUEST | F_FW_CMD_WRITE);
-	caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
-	ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
-			 NULL);
-	if (ret < 0) {
-		dev_warn(adapter, "Unable to finalize Firmware Capabilities %d\n",
-			 -ret);
-		goto bye;
-	}
-
 	/*
 	 * Tweak configuration based on system architecture, etc.
 	 */
@@ -1251,27 +1372,9 @@ static int adap_init0_config(struct adapter *adapter, int reset)
 		goto bye;
 	}
 
-	/*
-	 * Return successfully and note that we're operating with parameters
-	 * not supplied by the driver, rather than from hard-wired
-	 * initialization constants buried in the driver.
-	 */
-	dev_info(adapter,
-		 "Successfully configured using Firmware Configuration File \"%s\", version %#x, computed checksum %#x\n",
-		 config_name, finiver, cfcsum);
-
 	return 0;
 
-	/*
-	 * Something bad happened.  Return the error ...  (If the "error"
-	 * is that there's no Configuration File on the adapter we don't
-	 * want to issue a warning since this is fairly common.)
-	 */
 bye:
-	if (config_issued && ret != -ENOENT)
-		dev_warn(adapter, "\"%s\" configuration file error %d\n",
-			 config_name, -ret);
-
 	dev_debug(adapter, "%s: returning ret = %d ..\n", __func__, ret);
 	return ret;
 }
-- 
2.27.0