DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test
@ 2019-08-22 16:07 Ray Kinsella
  2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 1/2] app/test: add abi version testing functionality Ray Kinsella
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Ray Kinsella @ 2019-08-22 16:07 UTC (permalink / raw)
  To: dev
  Cc: mdr, bruce.richardson, vladimir.medvedkin, john.mcnamara,
	marko.kovacevic

This patchset adds ABI version testing to the app/test unit test framework,
addressing two issues previously raised during ML conversations on ABI
stability;

1. How do we unit test still supported previous ABI versions?
2. How to we unit test inline functions from still supported previous ABI
versions?

Starting with rte_lpm, I did the following:-

* I reproduced mostly unmodified unit tests for the v2.0 ABI, taken from DPDK
  2.2 and 17.02.
* I reproduced the rte_lpm interface header from v2.0, including the inline
  functions and remapping symbols to their appropriate versions.
* I added support for multiple abi versions to the app/test unit test framework
  to allow users to switch between abi versions (set_abi_version), without
  further polluting the already long list of unit tests available in app/test.

The intention here is that in future as developers need to deprecate APIs, the
associated unit tests may move into the ABI version testing mechanism of the
app/test instead of being replaced by the latest set of unit tests as would be
the case today.

v2:

* Added LPM IPv6 test cases for the v2.0 ABI.
* Fixed a number of checkpatch errors, stop short of substantially reworking
  the test code from the v2.0 ABI. 
* Removed duplicating test cases published in the original v1 patch.

Ray Kinsella (2):
  app/test: add abi version testing functionality
  app/test: lpm abi version testing

 app/test/Makefile                          |   12 +-
 app/test/commands.c                        |  131 +-
 app/test/meson.build                       |    6 +
 app/test/test.c                            |    2 +
 app/test/test.h                            |   48 +-
 app/test/test_lpm.c                        |    3 +-
 app/test/test_lpm6.c                       |    2 +-
 app/test/test_lpm_perf.c                   |  293 +---
 app/test/test_lpm_routes.c                 |  287 ++++
 app/test/test_lpm_routes.h                 |   25 +
 app/test/v2.0/dcompat.h                    |   30 +
 app/test/v2.0/rte_lpm.h                    |  451 +++++
 app/test/v2.0/rte_lpm6.h                   |  198 +++
 app/test/v2.0/test_lpm.c                   | 1139 +++++++++++++
 app/test/v2.0/test_lpm6.c                  | 1748 ++++++++++++++++++++
 app/test/v2.0/test_lpm6_perf.c             |  179 ++
 app/test/v2.0/test_lpm_perf.c              |  212 +++
 app/test/v2.0/test_v20.c                   |   14 +
 doc/guides/contributing/versioning.rst     |    4 +
 lib/librte_eal/common/include/rte_compat.h |    7 +
 20 files changed, 4471 insertions(+), 320 deletions(-)
 create mode 100644 app/test/test_lpm_routes.c
 create mode 100644 app/test/test_lpm_routes.h
 create mode 100644 app/test/v2.0/dcompat.h
 create mode 100644 app/test/v2.0/rte_lpm.h
 create mode 100644 app/test/v2.0/rte_lpm6.h
 create mode 100644 app/test/v2.0/test_lpm.c
 create mode 100644 app/test/v2.0/test_lpm6.c
 create mode 100644 app/test/v2.0/test_lpm6_perf.c
 create mode 100644 app/test/v2.0/test_lpm_perf.c
 create mode 100644 app/test/v2.0/test_v20.c

-- 
2.17.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [dpdk-dev] [PATCH v2 1/2] app/test: add abi version testing functionality
  2019-08-22 16:07 [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Ray Kinsella
@ 2019-08-22 16:07 ` Ray Kinsella
  2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 2/2] app/test: lpm abi version testing Ray Kinsella
  2019-08-23 15:49 ` [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Aaron Conole
  2 siblings, 0 replies; 8+ messages in thread
From: Ray Kinsella @ 2019-08-22 16:07 UTC (permalink / raw)
  To: dev
  Cc: mdr, bruce.richardson, vladimir.medvedkin, john.mcnamara,
	marko.kovacevic

This patchset adds ABI Version Testing functionality to the app/test
unit test framework, comprised of

1. The TEST_DPDK_ABI_VERSION_* and REGISTER_TEST_ABI_VERSION macros to
   register abi versions with infrastructure.
2. The MAP_ABI_SYMBOL_VERSION macro to remap symbols based on their ABI
   version.
3. The set_abi_version command to switch between ABI versions.
4. The BIND_VERSION_SYMBOL macro to bind against specific symbol
   versions.

Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
---
 app/test/commands.c                        | 131 ++++++++++++++++++---
 app/test/test.c                            |   2 +
 app/test/test.h                            |  52 ++++++--
 doc/guides/contributing/versioning.rst     |   4 +
 lib/librte_eal/common/include/rte_compat.h |   7 ++
 5 files changed, 170 insertions(+), 26 deletions(-)

diff --git a/app/test/commands.c b/app/test/commands.c
index 8d5a03a95..06fc33ee5 100644
--- a/app/test/commands.c
+++ b/app/test/commands.c
@@ -50,12 +50,22 @@
 
 /****************/
 
+static uint8_t test_abi_version = TEST_DPDK_ABI_VERSION_DEFAULT;
+
+static struct test_abi_version_list abi_version_list =
+	TAILQ_HEAD_INITIALIZER(abi_version_list);
+
 static struct test_commands_list commands_list =
 	TAILQ_HEAD_INITIALIZER(commands_list);
 
-void
-add_test_command(struct test_command *t)
+void add_abi_version(struct test_abi_version *av)
+{
+	TAILQ_INSERT_TAIL(&abi_version_list, av, next);
+}
+
+void add_test_command(struct test_command *t, uint8_t abi_version)
 {
+	t->abi_version = abi_version;
 	TAILQ_INSERT_TAIL(&commands_list, t, next);
 }
 
@@ -63,6 +73,12 @@ struct cmd_autotest_result {
 	cmdline_fixed_string_t autotest;
 };
 
+cmdline_parse_token_string_t
+cmd_autotest_autotest[TEST_DPDK_ABI_VERSION_MAX] = {
+	[0 ... TEST_DPDK_ABI_VERSION_MAX-1] =
+	TOKEN_STRING_INITIALIZER(struct cmd_autotest_result, autotest, "")
+};
+
 static void cmd_autotest_parsed(void *parsed_result,
 				__attribute__((unused)) struct cmdline *cl,
 				__attribute__((unused)) void *data)
@@ -72,7 +88,8 @@ static void cmd_autotest_parsed(void *parsed_result,
 	int ret = 0;
 
 	TAILQ_FOREACH(t, &commands_list, next) {
-		if (!strcmp(res->autotest, t->command))
+		if (!strcmp(res->autotest, t->command)
+				&& t->abi_version == test_abi_version)
 			ret = t->callback();
 	}
 
@@ -86,10 +103,6 @@ static void cmd_autotest_parsed(void *parsed_result,
 	fflush(stdout);
 }
 
-cmdline_parse_token_string_t cmd_autotest_autotest =
-	TOKEN_STRING_INITIALIZER(struct cmd_autotest_result, autotest,
-				 "");
-
 cmdline_parse_inst_t cmd_autotest = {
 	.f = cmd_autotest_parsed,  /* function to call */
 	.data = NULL,      /* 2nd arg of func */
@@ -244,6 +257,53 @@ cmdline_parse_inst_t cmd_quit = {
 
 /****************/
 
+struct cmd_set_abi_version_result {
+	cmdline_fixed_string_t set;
+	cmdline_fixed_string_t abi_version_name;
+};
+
+static void cmd_set_abi_version_parsed(
+				void *parsed_result,
+				__attribute__((unused)) struct cmdline *cl,
+				__attribute__((unused)) void *data)
+{
+	struct test_abi_version *av;
+	struct cmd_set_abi_version_result *res = parsed_result;
+
+	TAILQ_FOREACH(av, &abi_version_list, next) {
+		if (!strcmp(res->abi_version_name, av->version_name)) {
+
+			printf("abi version set to %s\n", av->version_name);
+			test_abi_version = av->version_id;
+			cmd_autotest.tokens[0] =
+				(void *)&cmd_autotest_autotest[av->version_id];
+		}
+	}
+
+	fflush(stdout);
+}
+
+cmdline_parse_token_string_t cmd_set_abi_version_set =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_abi_version_result, set,
+				"set_abi_version");
+
+cmdline_parse_token_string_t cmd_set_abi_version_abi_version =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_abi_version_result,
+				abi_version_name, NULL);
+
+cmdline_parse_inst_t cmd_set_abi_version = {
+	.f = cmd_set_abi_version_parsed,  /* function to call */
+	.data = NULL,      /* 2nd arg of func */
+	.help_str = "set abi version: ",
+	.tokens = {        /* token list, NULL terminated */
+		(void *)&cmd_set_abi_version_set,
+		(void *)&cmd_set_abi_version_abi_version,
+		NULL,
+	},
+};
+
+/****************/
+
 struct cmd_set_rxtx_result {
 	cmdline_fixed_string_t set;
 	cmdline_fixed_string_t mode;
@@ -259,7 +319,7 @@ static void cmd_set_rxtx_parsed(void *parsed_result, struct cmdline *cl,
 
 cmdline_parse_token_string_t cmd_set_rxtx_set =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_rxtx_result, set,
-				 "set_rxtx_mode");
+				"set_rxtx_mode");
 
 cmdline_parse_token_string_t cmd_set_rxtx_mode =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_rxtx_result, mode, NULL);
@@ -360,29 +420,66 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_rxtx,
 	(cmdline_parse_inst_t *)&cmd_set_rxtx_anchor,
 	(cmdline_parse_inst_t *)&cmd_set_rxtx_sc,
+	(cmdline_parse_inst_t *)&cmd_set_abi_version,
 	NULL,
 };
 
 int commands_init(void)
 {
+	struct test_abi_version *av;
 	struct test_command *t;
-	char *commands;
-	int commands_len = 0;
+	char *commands[TEST_DPDK_ABI_VERSION_MAX];
+	char *help;
+
+	int commands_len[TEST_DPDK_ABI_VERSION_MAX] = {
+		[0 ... TEST_DPDK_ABI_VERSION_MAX-1] = 0
+	};
+	int help_len = strlen(cmd_set_abi_version.help_str);
+	int abi_version;
+
+	/* set the set_abi_version command help string */
+	TAILQ_FOREACH(av, &abi_version_list, next) {
+		help_len += strlen(av->version_name) + 1;
+	}
+
+	help = (char *)calloc(help_len, sizeof(char));
+	if (!help)
+		return -1;
+
+	strlcat(help, cmd_set_abi_version.help_str, help_len);
+	TAILQ_FOREACH(av, &abi_version_list, next) {
+		strlcat(help, av->version_name, help_len);
+		if (TAILQ_NEXT(av, next) != NULL)
+			strlcat(help, "|", help_len);
+	}
+
+	cmd_set_abi_version.help_str = help;
 
+	/* set the parse strings for the command lists */
 	TAILQ_FOREACH(t, &commands_list, next) {
-		commands_len += strlen(t->command) + 1;
+		commands_len[t->abi_version] += strlen(t->command) + 1;
 	}
 
-	commands = (char *)calloc(commands_len, sizeof(char));
-	if (!commands)
-		return -1;
+	for (abi_version = 0; abi_version < TEST_DPDK_ABI_VERSION_MAX;
+		abi_version++) {
+		commands[abi_version] =
+			(char *)calloc(commands_len[abi_version], sizeof(char));
+		if (!commands[abi_version])
+			return -1;
+	}
 
 	TAILQ_FOREACH(t, &commands_list, next) {
-		strlcat(commands, t->command, commands_len);
+		strlcat(commands[t->abi_version],
+			t->command, commands_len[t->abi_version]);
 		if (TAILQ_NEXT(t, next) != NULL)
-			strlcat(commands, "#", commands_len);
+			strlcat(commands[t->abi_version],
+				"#", commands_len[t->abi_version]);
 	}
 
-	cmd_autotest_autotest.string_data.str = commands;
+	for (abi_version = 0; abi_version < TEST_DPDK_ABI_VERSION_MAX;
+		abi_version++)
+		cmd_autotest_autotest[abi_version].string_data.str =
+			commands[abi_version];
+
 	return 0;
 }
diff --git a/app/test/test.c b/app/test/test.c
index cd7aaf645..67179d4af 100644
--- a/app/test/test.c
+++ b/app/test/test.c
@@ -307,3 +307,5 @@ unit_test_suite_runner(struct unit_test_suite *suite)
 		return TEST_SKIPPED;
 	return TEST_SUCCESS;
 }
+
+REGISTER_TEST_ABI_VERSION(default, TEST_DPDK_ABI_VERSION_DEFAULT)
diff --git a/app/test/test.h b/app/test/test.h
index ac0c50616..5ec3728d0 100644
--- a/app/test/test.h
+++ b/app/test/test.h
@@ -162,25 +162,59 @@ int test_set_rxtx_conf(cmdline_fixed_string_t mode);
 int test_set_rxtx_anchor(cmdline_fixed_string_t type);
 int test_set_rxtx_sc(cmdline_fixed_string_t type);
 
+#define MAP_ABI_SYMBOL_VERSION(name, abi_version)                             \
+	__asm(".symver "RTE_STR(name)","RTE_STR(name)"@"RTE_STR(abi_version))
+
+#define TEST_DPDK_ABI_VERSION_DEFAULT 0
+#define TEST_DPDK_ABI_VERSION_V1604   1
+#define TEST_DPDK_ABI_VERSION_V20     2
+#define TEST_DPDK_ABI_VERSION_MAX     3
+
+TAILQ_HEAD(test_abi_version_list, test_abi_version);
+struct test_abi_version {
+	TAILQ_ENTRY(test_abi_version) next;
+	const char *version_name;
+	uint8_t version_id;
+};
+
+void add_abi_version(struct test_abi_version *av);
+
+/* Register a test function with its command string */
+#define REGISTER_TEST_ABI_VERSION(name, id)                                   \
+	static struct test_abi_version test_struct_##name = {                 \
+		.version_name = RTE_STR(name),                                \
+		.version_id = id,                                             \
+	};                                                                    \
+	RTE_INIT(test_register_##name)                                        \
+	{                                                                     \
+		add_abi_version(&test_struct_##name);                         \
+	}
+
 typedef int (test_callback)(void);
 TAILQ_HEAD(test_commands_list, test_command);
 struct test_command {
 	TAILQ_ENTRY(test_command) next;
 	const char *command;
 	test_callback *callback;
+	uint8_t abi_version;
 };
 
-void add_test_command(struct test_command *t);
+void add_test_command(struct test_command *t, uint8_t abi_version);
+
+/* Register a test function with its command string and abi version */
+#define REGISTER_TEST_COMMAND_VERSION(cmd, func, abi_version)                 \
+	static struct test_command test_struct_##cmd = {                      \
+		.command = RTE_STR(cmd),                                      \
+		.callback = func,                                             \
+	};                                                                    \
+	RTE_INIT(test_register_##cmd)                                         \
+	{                                                                     \
+		add_test_command(&test_struct_##cmd, abi_version);            \
+	}
 
 /* Register a test function with its command string */
+
 #define REGISTER_TEST_COMMAND(cmd, func) \
-	static struct test_command test_struct_##cmd = { \
-		.command = RTE_STR(cmd), \
-		.callback = func, \
-	}; \
-	RTE_INIT(test_register_##cmd) \
-	{ \
-		add_test_command(&test_struct_##cmd); \
-	}
+	REGISTER_TEST_COMMAND_VERSION(cmd, func, TEST_DPDK_ABI_VERSION_DEFAULT)
 
 #endif
diff --git a/doc/guides/contributing/versioning.rst b/doc/guides/contributing/versioning.rst
index 3ab2c4346..63ef53ea3 100644
--- a/doc/guides/contributing/versioning.rst
+++ b/doc/guides/contributing/versioning.rst
@@ -221,6 +221,10 @@ The macros exported are:
   the linker to bind references to symbol ``b`` to the internal symbol
   ``b_e``.
 
+* ``BIND_VERSION_SYMBOL(b, n)``: Creates a symbol version entry instructing
+  the linker to bind references to symbol ``b`` to the external symbol
+  ``b@DPDK_n``
+
 * ``MAP_STATIC_SYMBOL(f, p)``: Declare the prototype ``f``, and map it to the
   fully qualified function ``p``, so that if a symbol becomes versioned, it
   can still be mapped back to the public symbol name.
diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
index 92ff28faf..be9724f4c 100644
--- a/lib/librte_eal/common/include/rte_compat.h
+++ b/lib/librte_eal/common/include/rte_compat.h
@@ -50,6 +50,13 @@
 #define BIND_DEFAULT_SYMBOL(b, e, n) __asm__(".symver " RTE_STR(b) RTE_STR(e) ", " RTE_STR(b) "@@DPDK_" RTE_STR(n))
 #define __vsym __attribute__((used))
 
+/*
+ * BIND_VERSION_SYMBOL
+ * Creates a symbol version entry instructing the linker to bind references to
+ * symbol <b> to the symbol version <b>@DPDK_<n>
+ */
+#define BIND_VERSION_SYMBOL(b, n) __asm__(".symver " RTE_STR(b) ", " RTE_STR(b) "@DPDK_" RTE_STR(n))
+
 /*
  * MAP_STATIC_SYMBOL
  * If a function has been bifurcated into multiple versions, none of which
-- 
2.17.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [dpdk-dev] [PATCH v2 2/2] app/test: lpm abi version testing
  2019-08-22 16:07 [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Ray Kinsella
  2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 1/2] app/test: add abi version testing functionality Ray Kinsella
@ 2019-08-22 16:07 ` Ray Kinsella
  2019-08-23 15:49 ` [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Aaron Conole
  2 siblings, 0 replies; 8+ messages in thread
From: Ray Kinsella @ 2019-08-22 16:07 UTC (permalink / raw)
  To: dev
  Cc: mdr, bruce.richardson, vladimir.medvedkin, john.mcnamara,
	marko.kovacevic

This second patch adds the LPM ABI version Unit Tests, comprised of

1. Registering DPDK v2.0 ABI versions with the infrastructure.
2. Forward Porting the DPDK v2.0 LPM Unit Test cases, remapping the LPM
   Library symbols to the appropriate versions. The unit tests are forward
   ported more or less on an as-it-was basis.
3. Refactoring the lpm perf routes table to make this functionality
   available to the v2.0 unit tests, forwarding porting this code also from
   v2.0 would have increased the DPDK codebase several MLoC.

Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
---
 app/test/Makefile              |   12 +-
 app/test/meson.build           |    6 +
 app/test/test.h                |    4 -
 app/test/test_lpm.c            |    3 +-
 app/test/test_lpm6.c           |    2 +-
 app/test/test_lpm_perf.c       |  293 +-----
 app/test/test_lpm_routes.c     |  287 ++++++
 app/test/test_lpm_routes.h     |   25 +
 app/test/v2.0/dcompat.h        |   30 +
 app/test/v2.0/rte_lpm.h        |  451 ++++++++
 app/test/v2.0/rte_lpm6.h       |  198 ++++
 app/test/v2.0/test_lpm.c       | 1139 +++++++++++++++++++++
 app/test/v2.0/test_lpm6.c      | 1748 ++++++++++++++++++++++++++++++++
 app/test/v2.0/test_lpm6_perf.c |  179 ++++
 app/test/v2.0/test_lpm_perf.c  |  212 ++++
 app/test/v2.0/test_v20.c       |   14 +
 16 files changed, 4305 insertions(+), 298 deletions(-)
 create mode 100644 app/test/test_lpm_routes.c
 create mode 100644 app/test/test_lpm_routes.h
 create mode 100644 app/test/v2.0/dcompat.h
 create mode 100644 app/test/v2.0/rte_lpm.h
 create mode 100644 app/test/v2.0/rte_lpm6.h
 create mode 100644 app/test/v2.0/test_lpm.c
 create mode 100644 app/test/v2.0/test_lpm6.c
 create mode 100644 app/test/v2.0/test_lpm6_perf.c
 create mode 100644 app/test/v2.0/test_lpm_perf.c
 create mode 100644 app/test/v2.0/test_v20.c

diff --git a/app/test/Makefile b/app/test/Makefile
index 26ba6fe2b..8b2e0ca61 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -80,6 +80,8 @@ SRCS-y += test_ring.c
 SRCS-y += test_ring_perf.c
 SRCS-y += test_pmd_perf.c
 
+#ABI Version Testing
+SRCS-$(CONFIG_RTE_BUILD_SHARED_LIB) += v2.0/test_v20.c
 ifeq ($(CONFIG_RTE_LIBRTE_TABLE),y)
 SRCS-y += test_table.c
 SRCS-$(CONFIG_RTE_LIBRTE_PIPELINE) += test_table_pipeline.c
@@ -109,7 +111,6 @@ SRCS-y += test_logs.c
 SRCS-y += test_memcpy.c
 SRCS-y += test_memcpy_perf.c
 
-
 SRCS-$(CONFIG_RTE_LIBRTE_MEMBER) += test_member.c
 SRCS-$(CONFIG_RTE_LIBRTE_MEMBER) += test_member_perf.c
 
@@ -124,11 +125,20 @@ SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_multiwriter.c
 SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_readwrite.c
 SRCS-$(CONFIG_RTE_LIBRTE_HASH) += test_hash_readwrite_lf.c
 
+SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm_routes.c
 SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm.c
 SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm_perf.c
 SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm6.c
 SRCS-$(CONFIG_RTE_LIBRTE_LPM) += test_lpm6_perf.c
 
+#LPM ABI Testing
+ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
+SRCS-$(CONFIG_RTE_LIBRTE_LPM) += v2.0/test_lpm.c
+SRCS-$(CONFIG_RTE_LIBRTE_LPM) += v2.0/test_lpm_perf.c
+SRCS-$(CONFIG_RTE_LIBRTE_LPM) += v2.0/test_lpm6.c
+SRCS-$(CONFIG_RTE_LIBRTE_LPM) += v2.0/test_lpm6_perf.c
+endif
+
 SRCS-y += test_debug.c
 SRCS-y += test_errno.c
 SRCS-y += test_tailq.c
diff --git a/app/test/meson.build b/app/test/meson.build
index ec40943bd..a0c8d4611 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -8,6 +8,7 @@ endif
 test_sources = files('commands.c',
 	'packet_burst_generator.c',
 	'sample_packet_forward.c',
+	'v2.0/test_v20.c',
 	'test.c',
 	'test_acl.c',
 	'test_alarm.c',
@@ -68,6 +69,11 @@ test_sources = files('commands.c',
 	'test_lpm6.c',
 	'test_lpm6_perf.c',
 	'test_lpm_perf.c',
+	'test_lpm_routes.c',
+	'v2.0/test_lpm.c',
+	'v2.0/test_lpm_perf.c',
+	'v2.0/test_lpm6.c',
+	'v2.0/test_lpm6_perf.c',
 	'test_malloc.c',
 	'test_mbuf.c',
 	'test_member.c',
diff --git a/app/test/test.h b/app/test/test.h
index 5ec3728d0..dc95c4059 100644
--- a/app/test/test.h
+++ b/app/test/test.h
@@ -162,11 +162,7 @@ int test_set_rxtx_conf(cmdline_fixed_string_t mode);
 int test_set_rxtx_anchor(cmdline_fixed_string_t type);
 int test_set_rxtx_sc(cmdline_fixed_string_t type);
 
-#define MAP_ABI_SYMBOL_VERSION(name, abi_version)                             \
-	__asm(".symver "RTE_STR(name)","RTE_STR(name)"@"RTE_STR(abi_version))
-
 #define TEST_DPDK_ABI_VERSION_DEFAULT 0
-#define TEST_DPDK_ABI_VERSION_V1604   1
 #define TEST_DPDK_ABI_VERSION_V20     2
 #define TEST_DPDK_ABI_VERSION_MAX     3
 
diff --git a/app/test/test_lpm.c b/app/test/test_lpm.c
index e969fe051..0a3233220 100644
--- a/app/test/test_lpm.c
+++ b/app/test/test_lpm.c
@@ -41,7 +41,7 @@ static int32_t test16(void);
 static int32_t test17(void);
 static int32_t test18(void);
 
-rte_lpm_test tests[] = {
+static rte_lpm_test tests[] = {
 /* Test Cases */
 	test0,
 	test1,
@@ -1277,6 +1277,7 @@ test_lpm(void)
 	int status, global_status = 0;
 
 	for (i = 0; i < NUM_LPM_TESTS; i++) {
+		printf("# test %02d\n", i);
 		status = tests[i]();
 		if (status < 0) {
 			printf("ERROR: LPM Test %u: FAIL\n", i);
diff --git a/app/test/test_lpm6.c b/app/test/test_lpm6.c
index 670aadb40..474e4014c 100644
--- a/app/test/test_lpm6.c
+++ b/app/test/test_lpm6.c
@@ -52,7 +52,7 @@ static int32_t test26(void);
 static int32_t test27(void);
 static int32_t test28(void);
 
-rte_lpm6_test tests6[] = {
+static rte_lpm6_test tests6[] = {
 /* Test Cases */
 	test0,
 	test1,
diff --git a/app/test/test_lpm_perf.c b/app/test/test_lpm_perf.c
index 77eea66ad..a6b8b35c2 100644
--- a/app/test/test_lpm_perf.c
+++ b/app/test/test_lpm_perf.c
@@ -5,7 +5,6 @@
 #include <stdio.h>
 #include <stdint.h>
 #include <stdlib.h>
-#include <math.h>
 
 #include <rte_cycles.h>
 #include <rte_random.h>
@@ -13,6 +12,7 @@
 #include <rte_ip.h>
 #include <rte_lpm.h>
 
+#include "test_lpm_routes.h"
 #include "test.h"
 #include "test_xmmt_ops.h"
 
@@ -27,295 +27,6 @@
 #define BATCH_SIZE (1 << 12)
 #define BULK_SIZE 32
 
-#define MAX_RULE_NUM (1200000)
-
-struct route_rule {
-	uint32_t ip;
-	uint8_t depth;
-};
-
-struct route_rule large_route_table[MAX_RULE_NUM];
-
-static uint32_t num_route_entries;
-#define NUM_ROUTE_ENTRIES num_route_entries
-
-enum {
-	IP_CLASS_A,
-	IP_CLASS_B,
-	IP_CLASS_C
-};
-
-/* struct route_rule_count defines the total number of rules in following a/b/c
- * each item in a[]/b[]/c[] is the number of common IP address class A/B/C, not
- * including the ones for private local network.
- */
-struct route_rule_count {
-	uint32_t a[RTE_LPM_MAX_DEPTH];
-	uint32_t b[RTE_LPM_MAX_DEPTH];
-	uint32_t c[RTE_LPM_MAX_DEPTH];
-};
-
-/* All following numbers of each depth of each common IP class are just
- * got from previous large constant table in app/test/test_lpm_routes.h .
- * In order to match similar performance, they keep same depth and IP
- * address coverage as previous constant table. These numbers don't
- * include any private local IP address. As previous large const rule
- * table was just dumped from a real router, there are no any IP address
- * in class C or D.
- */
-static struct route_rule_count rule_count = {
-	.a = { /* IP class A in which the most significant bit is 0 */
-		    0, /* depth =  1 */
-		    0, /* depth =  2 */
-		    1, /* depth =  3 */
-		    0, /* depth =  4 */
-		    2, /* depth =  5 */
-		    1, /* depth =  6 */
-		    3, /* depth =  7 */
-		  185, /* depth =  8 */
-		   26, /* depth =  9 */
-		   16, /* depth = 10 */
-		   39, /* depth = 11 */
-		  144, /* depth = 12 */
-		  233, /* depth = 13 */
-		  528, /* depth = 14 */
-		  866, /* depth = 15 */
-		 3856, /* depth = 16 */
-		 3268, /* depth = 17 */
-		 5662, /* depth = 18 */
-		17301, /* depth = 19 */
-		22226, /* depth = 20 */
-		11147, /* depth = 21 */
-		16746, /* depth = 22 */
-		17120, /* depth = 23 */
-		77578, /* depth = 24 */
-		  401, /* depth = 25 */
-		  656, /* depth = 26 */
-		 1107, /* depth = 27 */
-		 1121, /* depth = 28 */
-		 2316, /* depth = 29 */
-		  717, /* depth = 30 */
-		   10, /* depth = 31 */
-		   66  /* depth = 32 */
-	},
-	.b = { /* IP class A in which the most 2 significant bits are 10 */
-		    0, /* depth =  1 */
-		    0, /* depth =  2 */
-		    0, /* depth =  3 */
-		    0, /* depth =  4 */
-		    1, /* depth =  5 */
-		    1, /* depth =  6 */
-		    1, /* depth =  7 */
-		    3, /* depth =  8 */
-		    3, /* depth =  9 */
-		   30, /* depth = 10 */
-		   25, /* depth = 11 */
-		  168, /* depth = 12 */
-		  305, /* depth = 13 */
-		  569, /* depth = 14 */
-		 1129, /* depth = 15 */
-		50800, /* depth = 16 */
-		 1645, /* depth = 17 */
-		 1820, /* depth = 18 */
-		 3506, /* depth = 19 */
-		 3258, /* depth = 20 */
-		 3424, /* depth = 21 */
-		 4971, /* depth = 22 */
-		 6885, /* depth = 23 */
-		39771, /* depth = 24 */
-		  424, /* depth = 25 */
-		  170, /* depth = 26 */
-		  433, /* depth = 27 */
-		   92, /* depth = 28 */
-		  366, /* depth = 29 */
-		  377, /* depth = 30 */
-		    2, /* depth = 31 */
-		  200  /* depth = 32 */
-	},
-	.c = { /* IP class A in which the most 3 significant bits are 110 */
-		     0, /* depth =  1 */
-		     0, /* depth =  2 */
-		     0, /* depth =  3 */
-		     0, /* depth =  4 */
-		     0, /* depth =  5 */
-		     0, /* depth =  6 */
-		     0, /* depth =  7 */
-		    12, /* depth =  8 */
-		     8, /* depth =  9 */
-		     9, /* depth = 10 */
-		    33, /* depth = 11 */
-		    69, /* depth = 12 */
-		   237, /* depth = 13 */
-		  1007, /* depth = 14 */
-		  1717, /* depth = 15 */
-		 14663, /* depth = 16 */
-		  8070, /* depth = 17 */
-		 16185, /* depth = 18 */
-		 48261, /* depth = 19 */
-		 36870, /* depth = 20 */
-		 33960, /* depth = 21 */
-		 50638, /* depth = 22 */
-		 61422, /* depth = 23 */
-		466549, /* depth = 24 */
-		  1829, /* depth = 25 */
-		  4824, /* depth = 26 */
-		  4927, /* depth = 27 */
-		  5914, /* depth = 28 */
-		 10254, /* depth = 29 */
-		  4905, /* depth = 30 */
-		     1, /* depth = 31 */
-		   716  /* depth = 32 */
-	}
-};
-
-static void generate_random_rule_prefix(uint32_t ip_class, uint8_t depth)
-{
-/* IP address class A, the most significant bit is 0 */
-#define IP_HEAD_MASK_A			0x00000000
-#define IP_HEAD_BIT_NUM_A		1
-
-/* IP address class B, the most significant 2 bits are 10 */
-#define IP_HEAD_MASK_B			0x80000000
-#define IP_HEAD_BIT_NUM_B		2
-
-/* IP address class C, the most significant 3 bits are 110 */
-#define IP_HEAD_MASK_C			0xC0000000
-#define IP_HEAD_BIT_NUM_C		3
-
-	uint32_t class_depth;
-	uint32_t range;
-	uint32_t mask;
-	uint32_t step;
-	uint32_t start;
-	uint32_t fixed_bit_num;
-	uint32_t ip_head_mask;
-	uint32_t rule_num;
-	uint32_t k;
-	struct route_rule *ptr_rule;
-
-	if (ip_class == IP_CLASS_A) {        /* IP Address class A */
-		fixed_bit_num = IP_HEAD_BIT_NUM_A;
-		ip_head_mask = IP_HEAD_MASK_A;
-		rule_num = rule_count.a[depth - 1];
-	} else if (ip_class == IP_CLASS_B) { /* IP Address class B */
-		fixed_bit_num = IP_HEAD_BIT_NUM_B;
-		ip_head_mask = IP_HEAD_MASK_B;
-		rule_num = rule_count.b[depth - 1];
-	} else {                             /* IP Address class C */
-		fixed_bit_num = IP_HEAD_BIT_NUM_C;
-		ip_head_mask = IP_HEAD_MASK_C;
-		rule_num = rule_count.c[depth - 1];
-	}
-
-	if (rule_num == 0)
-		return;
-
-	/* the number of rest bits which don't include the most significant
-	 * fixed bits for this IP address class
-	 */
-	class_depth = depth - fixed_bit_num;
-
-	/* range is the maximum number of rules for this depth and
-	 * this IP address class
-	 */
-	range = 1 << class_depth;
-
-	/* only mask the most depth significant generated bits
-	 * except fixed bits for IP address class
-	 */
-	mask = range - 1;
-
-	/* Widen coverage of IP address in generated rules */
-	if (range <= rule_num)
-		step = 1;
-	else
-		step = round((double)range / rule_num);
-
-	/* Only generate rest bits except the most significant
-	 * fixed bits for IP address class
-	 */
-	start = lrand48() & mask;
-	ptr_rule = &large_route_table[num_route_entries];
-	for (k = 0; k < rule_num; k++) {
-		ptr_rule->ip = (start << (RTE_LPM_MAX_DEPTH - depth))
-			| ip_head_mask;
-		ptr_rule->depth = depth;
-		ptr_rule++;
-		start = (start + step) & mask;
-	}
-	num_route_entries += rule_num;
-}
-
-static void insert_rule_in_random_pos(uint32_t ip, uint8_t depth)
-{
-	uint32_t pos;
-	int try_count = 0;
-	struct route_rule tmp;
-
-	do {
-		pos = lrand48();
-		try_count++;
-	} while ((try_count < 10) && (pos > num_route_entries));
-
-	if ((pos > num_route_entries) || (pos >= MAX_RULE_NUM))
-		pos = num_route_entries >> 1;
-
-	tmp = large_route_table[pos];
-	large_route_table[pos].ip = ip;
-	large_route_table[pos].depth = depth;
-	if (num_route_entries < MAX_RULE_NUM)
-		large_route_table[num_route_entries++] = tmp;
-}
-
-static void generate_large_route_rule_table(void)
-{
-	uint32_t ip_class;
-	uint8_t  depth;
-
-	num_route_entries = 0;
-	memset(large_route_table, 0, sizeof(large_route_table));
-
-	for (ip_class = IP_CLASS_A; ip_class <= IP_CLASS_C; ip_class++) {
-		for (depth = 1; depth <= RTE_LPM_MAX_DEPTH; depth++) {
-			generate_random_rule_prefix(ip_class, depth);
-		}
-	}
-
-	/* Add following rules to keep same as previous large constant table,
-	 * they are 4 rules with private local IP address and 1 all-zeros prefix
-	 * with depth = 8.
-	 */
-	insert_rule_in_random_pos(RTE_IPV4(0, 0, 0, 0), 8);
-	insert_rule_in_random_pos(RTE_IPV4(10, 2, 23, 147), 32);
-	insert_rule_in_random_pos(RTE_IPV4(192, 168, 100, 10), 24);
-	insert_rule_in_random_pos(RTE_IPV4(192, 168, 25, 100), 24);
-	insert_rule_in_random_pos(RTE_IPV4(192, 168, 129, 124), 32);
-}
-
-static void
-print_route_distribution(const struct route_rule *table, uint32_t n)
-{
-	unsigned i, j;
-
-	printf("Route distribution per prefix width: \n");
-	printf("DEPTH    QUANTITY (PERCENT)\n");
-	printf("--------------------------- \n");
-
-	/* Count depths. */
-	for (i = 1; i <= 32; i++) {
-		unsigned depth_counter = 0;
-		double percent_hits;
-
-		for (j = 0; j < n; j++)
-			if (table[j].depth == (uint8_t) i)
-				depth_counter++;
-
-		percent_hits = ((double)depth_counter)/((double)n) * 100;
-		printf("%.2u%15u (%.2f)\n", i, depth_counter, percent_hits);
-	}
-	printf("\n");
-}
-
 static int
 test_lpm_perf(void)
 {
@@ -375,7 +86,7 @@ test_lpm_perf(void)
 			(unsigned) cache_line_counter, (unsigned) cache_line_counter * 64);
 
 	printf("Average LPM Add: %g cycles\n",
-			(double)total_time / NUM_ROUTE_ENTRIES);
+	       (double)total_time / NUM_ROUTE_ENTRIES);
 
 	/* Measure single Lookup */
 	total_time = 0;
diff --git a/app/test/test_lpm_routes.c b/app/test/test_lpm_routes.c
new file mode 100644
index 000000000..edd1eba1b
--- /dev/null
+++ b/app/test/test_lpm_routes.c
@@ -0,0 +1,287 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ */
+
+#include <math.h>
+
+#include "rte_lpm.h"
+#include "test_lpm_routes.h"
+
+uint32_t num_route_entries;
+struct route_rule large_route_table[MAX_RULE_NUM];
+
+enum {
+	IP_CLASS_A,
+	IP_CLASS_B,
+	IP_CLASS_C
+};
+
+/* struct route_rule_count defines the total number of rules in following a/b/c
+ * each item in a[]/b[]/c[] is the number of common IP address class A/B/C, not
+ * including the ones for private local network.
+ */
+struct route_rule_count {
+	uint32_t a[RTE_LPM_MAX_DEPTH];
+	uint32_t b[RTE_LPM_MAX_DEPTH];
+	uint32_t c[RTE_LPM_MAX_DEPTH];
+};
+
+/* All following numbers of each depth of each common IP class are just
+ * got from previous large constant table in app/test/test_lpm_routes.h .
+ * In order to match similar performance, they keep same depth and IP
+ * address coverage as previous constant table. These numbers don't
+ * include any private local IP address. As previous large const rule
+ * table was just dumped from a real router, there are no any IP address
+ * in class C or D.
+ */
+static struct route_rule_count rule_count = {
+	.a = { /* IP class A in which the most significant bit is 0 */
+		    0, /* depth =  1 */
+		    0, /* depth =  2 */
+		    1, /* depth =  3 */
+		    0, /* depth =  4 */
+		    2, /* depth =  5 */
+		    1, /* depth =  6 */
+		    3, /* depth =  7 */
+		  185, /* depth =  8 */
+		   26, /* depth =  9 */
+		   16, /* depth = 10 */
+		   39, /* depth = 11 */
+		  144, /* depth = 12 */
+		  233, /* depth = 13 */
+		  528, /* depth = 14 */
+		  866, /* depth = 15 */
+		 3856, /* depth = 16 */
+		 3268, /* depth = 17 */
+		 5662, /* depth = 18 */
+		17301, /* depth = 19 */
+		22226, /* depth = 20 */
+		11147, /* depth = 21 */
+		16746, /* depth = 22 */
+		17120, /* depth = 23 */
+		77578, /* depth = 24 */
+		  401, /* depth = 25 */
+		  656, /* depth = 26 */
+		 1107, /* depth = 27 */
+		 1121, /* depth = 28 */
+		 2316, /* depth = 29 */
+		  717, /* depth = 30 */
+		   10, /* depth = 31 */
+		   66  /* depth = 32 */
+	},
+	.b = { /* IP class A in which the most 2 significant bits are 10 */
+		    0, /* depth =  1 */
+		    0, /* depth =  2 */
+		    0, /* depth =  3 */
+		    0, /* depth =  4 */
+		    1, /* depth =  5 */
+		    1, /* depth =  6 */
+		    1, /* depth =  7 */
+		    3, /* depth =  8 */
+		    3, /* depth =  9 */
+		   30, /* depth = 10 */
+		   25, /* depth = 11 */
+		  168, /* depth = 12 */
+		  305, /* depth = 13 */
+		  569, /* depth = 14 */
+		 1129, /* depth = 15 */
+		50800, /* depth = 16 */
+		 1645, /* depth = 17 */
+		 1820, /* depth = 18 */
+		 3506, /* depth = 19 */
+		 3258, /* depth = 20 */
+		 3424, /* depth = 21 */
+		 4971, /* depth = 22 */
+		 6885, /* depth = 23 */
+		39771, /* depth = 24 */
+		  424, /* depth = 25 */
+		  170, /* depth = 26 */
+		  433, /* depth = 27 */
+		   92, /* depth = 28 */
+		  366, /* depth = 29 */
+		  377, /* depth = 30 */
+		    2, /* depth = 31 */
+		  200  /* depth = 32 */
+	},
+	.c = { /* IP class A in which the most 3 significant bits are 110 */
+		     0, /* depth =  1 */
+		     0, /* depth =  2 */
+		     0, /* depth =  3 */
+		     0, /* depth =  4 */
+		     0, /* depth =  5 */
+		     0, /* depth =  6 */
+		     0, /* depth =  7 */
+		    12, /* depth =  8 */
+		     8, /* depth =  9 */
+		     9, /* depth = 10 */
+		    33, /* depth = 11 */
+		    69, /* depth = 12 */
+		   237, /* depth = 13 */
+		  1007, /* depth = 14 */
+		  1717, /* depth = 15 */
+		 14663, /* depth = 16 */
+		  8070, /* depth = 17 */
+		 16185, /* depth = 18 */
+		 48261, /* depth = 19 */
+		 36870, /* depth = 20 */
+		 33960, /* depth = 21 */
+		 50638, /* depth = 22 */
+		 61422, /* depth = 23 */
+		466549, /* depth = 24 */
+		  1829, /* depth = 25 */
+		  4824, /* depth = 26 */
+		  4927, /* depth = 27 */
+		  5914, /* depth = 28 */
+		 10254, /* depth = 29 */
+		  4905, /* depth = 30 */
+		     1, /* depth = 31 */
+		   716  /* depth = 32 */
+	}
+};
+
+static void generate_random_rule_prefix(uint32_t ip_class, uint8_t depth)
+{
+/* IP address class A, the most significant bit is 0 */
+#define IP_HEAD_MASK_A			0x00000000
+#define IP_HEAD_BIT_NUM_A		1
+
+/* IP address class B, the most significant 2 bits are 10 */
+#define IP_HEAD_MASK_B			0x80000000
+#define IP_HEAD_BIT_NUM_B		2
+
+/* IP address class C, the most significant 3 bits are 110 */
+#define IP_HEAD_MASK_C			0xC0000000
+#define IP_HEAD_BIT_NUM_C		3
+
+	uint32_t class_depth;
+	uint32_t range;
+	uint32_t mask;
+	uint32_t step;
+	uint32_t start;
+	uint32_t fixed_bit_num;
+	uint32_t ip_head_mask;
+	uint32_t rule_num;
+	uint32_t k;
+	struct route_rule *ptr_rule;
+
+	if (ip_class == IP_CLASS_A) {        /* IP Address class A */
+		fixed_bit_num = IP_HEAD_BIT_NUM_A;
+		ip_head_mask = IP_HEAD_MASK_A;
+		rule_num = rule_count.a[depth - 1];
+	} else if (ip_class == IP_CLASS_B) { /* IP Address class B */
+		fixed_bit_num = IP_HEAD_BIT_NUM_B;
+		ip_head_mask = IP_HEAD_MASK_B;
+		rule_num = rule_count.b[depth - 1];
+	} else {                             /* IP Address class C */
+		fixed_bit_num = IP_HEAD_BIT_NUM_C;
+		ip_head_mask = IP_HEAD_MASK_C;
+		rule_num = rule_count.c[depth - 1];
+	}
+
+	if (rule_num == 0)
+		return;
+
+	/* the number of rest bits which don't include the most significant
+	 * fixed bits for this IP address class
+	 */
+	class_depth = depth - fixed_bit_num;
+
+	/* range is the maximum number of rules for this depth and
+	 * this IP address class
+	 */
+	range = 1 << class_depth;
+
+	/* only mask the most depth significant generated bits
+	 * except fixed bits for IP address class
+	 */
+	mask = range - 1;
+
+	/* Widen coverage of IP address in generated rules */
+	if (range <= rule_num)
+		step = 1;
+	else
+		step = round((double)range / rule_num);
+
+	/* Only generate rest bits except the most significant
+	 * fixed bits for IP address class
+	 */
+	start = lrand48() & mask;
+	ptr_rule = &large_route_table[num_route_entries];
+	for (k = 0; k < rule_num; k++) {
+		ptr_rule->ip = (start << (RTE_LPM_MAX_DEPTH - depth))
+			| ip_head_mask;
+		ptr_rule->depth = depth;
+		ptr_rule++;
+		start = (start + step) & mask;
+	}
+	num_route_entries += rule_num;
+}
+
+static void insert_rule_in_random_pos(uint32_t ip, uint8_t depth)
+{
+	uint32_t pos;
+	int try_count = 0;
+	struct route_rule tmp;
+
+	do {
+		pos = lrand48();
+		try_count++;
+	} while ((try_count < 10) && (pos > num_route_entries));
+
+	if ((pos > num_route_entries) || (pos >= MAX_RULE_NUM))
+		pos = num_route_entries >> 1;
+
+	tmp = large_route_table[pos];
+	large_route_table[pos].ip = ip;
+	large_route_table[pos].depth = depth;
+	if (num_route_entries < MAX_RULE_NUM)
+		large_route_table[num_route_entries++] = tmp;
+}
+
+void generate_large_route_rule_table(void)
+{
+	uint32_t ip_class;
+	uint8_t  depth;
+
+	num_route_entries = 0;
+	memset(large_route_table, 0, sizeof(large_route_table));
+
+	for (ip_class = IP_CLASS_A; ip_class <= IP_CLASS_C; ip_class++) {
+		for (depth = 1; depth <= RTE_LPM_MAX_DEPTH; depth++)
+			generate_random_rule_prefix(ip_class, depth);
+	}
+
+	/* Add following rules to keep same as previous large constant table,
+	 * they are 4 rules with private local IP address and 1 all-zeros prefix
+	 * with depth = 8.
+	 */
+	insert_rule_in_random_pos(RTE_IPV4(0, 0, 0, 0), 8);
+	insert_rule_in_random_pos(RTE_IPV4(10, 2, 23, 147), 32);
+	insert_rule_in_random_pos(RTE_IPV4(192, 168, 100, 10), 24);
+	insert_rule_in_random_pos(RTE_IPV4(192, 168, 25, 100), 24);
+	insert_rule_in_random_pos(RTE_IPV4(192, 168, 129, 124), 32);
+}
+
+void
+print_route_distribution(const struct route_rule *table, uint32_t n)
+{
+	unsigned int i, j;
+
+	printf("Route distribution per prefix width:\n");
+	printf("DEPTH    QUANTITY (PERCENT)\n");
+	printf("---------------------------\n");
+
+	/* Count depths. */
+	for (i = 1; i <= 32; i++) {
+		unsigned int depth_counter = 0;
+		double percent_hits;
+
+		for (j = 0; j < n; j++)
+			if (table[j].depth == (uint8_t) i)
+				depth_counter++;
+
+		percent_hits = ((double)depth_counter)/((double)n) * 100;
+		printf("%.2u%15u (%.2f)\n", i, depth_counter, percent_hits);
+	}
+	printf("\n");
+}
diff --git a/app/test/test_lpm_routes.h b/app/test/test_lpm_routes.h
new file mode 100644
index 000000000..c7874ea8f
--- /dev/null
+++ b/app/test/test_lpm_routes.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ */
+
+#ifndef _TEST_LPM_ROUTES_H_
+#define _TEST_LPM_ROUTES_H_
+
+#include <rte_ip.h>
+
+#define MAX_RULE_NUM (1200000)
+
+struct route_rule {
+	uint32_t ip;
+	uint8_t depth;
+};
+
+extern struct route_rule large_route_table[MAX_RULE_NUM];
+
+extern uint32_t num_route_entries;
+#define NUM_ROUTE_ENTRIES num_route_entries
+
+void generate_large_route_rule_table(void);
+void print_route_distribution(const struct route_rule *table, uint32_t n);
+
+#endif
diff --git a/app/test/v2.0/dcompat.h b/app/test/v2.0/dcompat.h
new file mode 100644
index 000000000..e66206156
--- /dev/null
+++ b/app/test/v2.0/dcompat.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ */
+
+#ifndef _DCOMPAT_H_
+#define _DCOMPAT_H_
+
+#include <rte_compat.h>
+
+#define ABI_VERSION 2.0
+
+#define MAP_ABI_SYMBOL(name) \
+	BIND_VERSION_SYMBOL(name, ABI_VERSION)
+
+MAP_ABI_SYMBOL(rte_lpm_add);
+MAP_ABI_SYMBOL(rte_lpm_find_existing);
+MAP_ABI_SYMBOL(rte_lpm_create);
+MAP_ABI_SYMBOL(rte_lpm_free);
+MAP_ABI_SYMBOL(rte_lpm_is_rule_present);
+MAP_ABI_SYMBOL(rte_lpm_delete);
+MAP_ABI_SYMBOL(rte_lpm_delete_all);
+
+MAP_ABI_SYMBOL(rte_lpm6_add);
+MAP_ABI_SYMBOL(rte_lpm6_is_rule_present);
+MAP_ABI_SYMBOL(rte_lpm6_lookup);
+MAP_ABI_SYMBOL(rte_lpm6_lookup_bulk_func);
+
+#undef MAP_ABI_SYMBOL
+
+#endif
diff --git a/app/test/v2.0/rte_lpm.h b/app/test/v2.0/rte_lpm.h
new file mode 100644
index 000000000..5e05015cb
--- /dev/null
+++ b/app/test/v2.0/rte_lpm.h
@@ -0,0 +1,451 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
+ */
+
+#ifndef _RTE_LPM_H_
+#define _RTE_LPM_H_
+
+/**
+ * @file
+ * RTE Longest Prefix Match (LPM)
+ */
+
+#include <errno.h>
+#include <sys/queue.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <rte_branch_prediction.h>
+#include <rte_byteorder.h>
+#include <rte_memory.h>
+#include <rte_common.h>
+#include <rte_vect.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Max number of characters in LPM name. */
+#define RTE_LPM_NAMESIZE                32
+
+/** Maximum depth value possible for IPv4 LPM. */
+#define RTE_LPM_MAX_DEPTH               32
+
+/** @internal Total number of tbl24 entries. */
+#define RTE_LPM_TBL24_NUM_ENTRIES       (1 << 24)
+
+/** @internal Number of entries in a tbl8 group. */
+#define RTE_LPM_TBL8_GROUP_NUM_ENTRIES  256
+
+/** @internal Total number of tbl8 groups in the tbl8. */
+#define RTE_LPM_TBL8_NUM_GROUPS         256
+
+/** @internal Total number of tbl8 entries. */
+#define RTE_LPM_TBL8_NUM_ENTRIES        (RTE_LPM_TBL8_NUM_GROUPS * \
+					RTE_LPM_TBL8_GROUP_NUM_ENTRIES)
+
+/** @internal Macro to enable/disable run-time checks. */
+#if defined(RTE_LIBRTE_LPM_DEBUG)
+#define RTE_LPM_RETURN_IF_TRUE(cond, retval) do { \
+	if (cond) return (retval);                \
+} while (0)
+#else
+#define RTE_LPM_RETURN_IF_TRUE(cond, retval)
+#endif
+
+/** @internal bitmask with valid and ext_entry/valid_group fields set */
+#define RTE_LPM_VALID_EXT_ENTRY_BITMASK 0x0300
+
+/** Bitmask used to indicate successful lookup */
+#define RTE_LPM_LOOKUP_SUCCESS          0x0100
+
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+/** @internal Tbl24 entry structure. */
+struct rte_lpm_tbl24_entry {
+	/* Stores Next hop or group index (i.e. gindex)into tbl8. */
+	union {
+		uint8_t next_hop;
+		uint8_t tbl8_gindex;
+	};
+	/* Using single uint8_t to store 3 values. */
+	uint8_t valid     :1; /**< Validation flag. */
+	uint8_t ext_entry :1; /**< External entry. */
+	uint8_t depth     :6; /**< Rule depth. */
+};
+
+/** @internal Tbl8 entry structure. */
+struct rte_lpm_tbl8_entry {
+	uint8_t next_hop; /**< next hop. */
+	/* Using single uint8_t to store 3 values. */
+	uint8_t valid       :1; /**< Validation flag. */
+	uint8_t valid_group :1; /**< Group validation flag. */
+	uint8_t depth       :6; /**< Rule depth. */
+};
+#else
+struct rte_lpm_tbl24_entry {
+	uint8_t depth       :6;
+	uint8_t ext_entry   :1;
+	uint8_t valid       :1;
+	union {
+		uint8_t tbl8_gindex;
+		uint8_t next_hop;
+	};
+};
+
+struct rte_lpm_tbl8_entry {
+	uint8_t depth       :6;
+	uint8_t valid_group :1;
+	uint8_t valid       :1;
+	uint8_t next_hop;
+};
+#endif
+
+/** @internal Rule structure. */
+struct rte_lpm_rule {
+	uint32_t ip; /**< Rule IP address. */
+	uint8_t  next_hop; /**< Rule next hop. */
+};
+
+/** @internal Contains metadata about the rules table. */
+struct rte_lpm_rule_info {
+	uint32_t used_rules; /**< Used rules so far. */
+	uint32_t first_rule; /**< Indexes the first rule of a given depth. */
+};
+
+/** @internal LPM structure. */
+struct rte_lpm {
+	/* LPM metadata. */
+	char name[RTE_LPM_NAMESIZE];        /**< Name of the lpm. */
+	uint32_t max_rules; /**< Max. balanced rules per lpm. */
+	struct rte_lpm_rule_info rule_info[RTE_LPM_MAX_DEPTH]; /**< Rule info table. */
+
+	/* LPM Tables. */
+	struct rte_lpm_tbl24_entry tbl24[RTE_LPM_TBL24_NUM_ENTRIES] \
+			__rte_cache_aligned; /**< LPM tbl24 table. */
+	struct rte_lpm_tbl8_entry tbl8[RTE_LPM_TBL8_NUM_ENTRIES] \
+			__rte_cache_aligned; /**< LPM tbl8 table. */
+	struct rte_lpm_rule rules_tbl[0] \
+			__rte_cache_aligned; /**< LPM rules. */
+};
+
+/**
+ * Create an LPM object.
+ *
+ * @param name
+ *   LPM object name
+ * @param socket_id
+ *   NUMA socket ID for LPM table memory allocation
+ * @param max_rules
+ *   Maximum number of LPM rules that can be added
+ * @param flags
+ *   This parameter is currently unused
+ * @return
+ *   Handle to LPM object on success, NULL otherwise with rte_errno set
+ *   to an appropriate values. Possible rte_errno values include:
+ *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ *    - E_RTE_SECONDARY - function was called from a secondary process instance
+ *    - EINVAL - invalid parameter passed to function
+ *    - ENOSPC - the maximum number of memzones has already been allocated
+ *    - EEXIST - a memzone with the same name already exists
+ *    - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_lpm *
+rte_lpm_create(const char *name, int socket_id, int max_rules, int flags);
+
+/**
+ * Find an existing LPM object and return a pointer to it.
+ *
+ * @param name
+ *   Name of the lpm object as passed to rte_lpm_create()
+ * @return
+ *   Pointer to lpm object or NULL if object not found with rte_errno
+ *   set appropriately. Possible rte_errno values include:
+ *    - ENOENT - required entry not available to return.
+ */
+struct rte_lpm *
+rte_lpm_find_existing(const char *name);
+
+/**
+ * Free an LPM object.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @return
+ *   None
+ */
+void
+rte_lpm_free(struct rte_lpm *lpm);
+
+/**
+ * Add a rule to the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP of the rule to be added to the LPM table
+ * @param depth
+ *   Depth of the rule to be added to the LPM table
+ * @param next_hop
+ *   Next hop of the rule to be added to the LPM table
+ * @return
+ *   0 on success, negative value otherwise
+ */
+int
+rte_lpm_add(struct rte_lpm *lpm, uint32_t ip, uint8_t depth, uint8_t next_hop);
+
+/**
+ * Check if a rule is present in the LPM table,
+ * and provide its next hop if it is.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP of the rule to be searched
+ * @param depth
+ *   Depth of the rule to searched
+ * @param next_hop
+ *   Next hop of the rule (valid only if it is found)
+ * @return
+ *   1 if the rule exists, 0 if it does not, a negative value on failure
+ */
+int
+rte_lpm_is_rule_present(struct rte_lpm *lpm, uint32_t ip, uint8_t depth,
+uint8_t *next_hop);
+
+/**
+ * Delete a rule from the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP of the rule to be deleted from the LPM table
+ * @param depth
+ *   Depth of the rule to be deleted from the LPM table
+ * @return
+ *   0 on success, negative value otherwise
+ */
+int
+rte_lpm_delete(struct rte_lpm *lpm, uint32_t ip, uint8_t depth);
+
+/**
+ * Delete all rules from the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ */
+void
+rte_lpm_delete_all(struct rte_lpm *lpm);
+
+/**
+ * Lookup an IP into the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP to be looked up in the LPM table
+ * @param next_hop
+ *   Next hop of the most specific rule found for IP (valid on lookup hit only)
+ * @return
+ *   -EINVAL for incorrect arguments, -ENOENT on lookup miss, 0 on lookup hit
+ */
+static inline int
+rte_lpm_lookup(struct rte_lpm *lpm, uint32_t ip, uint8_t *next_hop)
+{
+	unsigned tbl24_index = (ip >> 8);
+	uint16_t tbl_entry;
+
+	/* DEBUG: Check user input arguments. */
+	RTE_LPM_RETURN_IF_TRUE(((lpm == NULL) || (next_hop == NULL)), -EINVAL);
+
+	/* Copy tbl24 entry */
+	tbl_entry = *(const uint16_t *)&lpm->tbl24[tbl24_index];
+
+	/* Copy tbl8 entry (only if needed) */
+	if (unlikely((tbl_entry & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+			RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+
+		unsigned tbl8_index = (uint8_t)ip +
+				((uint8_t)tbl_entry * RTE_LPM_TBL8_GROUP_NUM_ENTRIES);
+
+		tbl_entry = *(const uint16_t *)&lpm->tbl8[tbl8_index];
+	}
+
+	*next_hop = (uint8_t)tbl_entry;
+	return (tbl_entry & RTE_LPM_LOOKUP_SUCCESS) ? 0 : -ENOENT;
+}
+
+/**
+ * Lookup multiple IP addresses in an LPM table. This may be implemented as a
+ * macro, so the address of the function should not be used.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ips
+ *   Array of IPs to be looked up in the LPM table
+ * @param next_hops
+ *   Next hop of the most specific rule found for IP (valid on lookup hit only).
+ *   This is an array of two byte values. The most significant byte in each
+ *   value says whether the lookup was successful (bitmask
+ *   RTE_LPM_LOOKUP_SUCCESS is set). The least significant byte is the
+ *   actual next hop.
+ * @param n
+ *   Number of elements in ips (and next_hops) array to lookup. This should be a
+ *   compile time constant, and divisible by 8 for best performance.
+ *  @return
+ *   -EINVAL for incorrect arguments, otherwise 0
+ */
+#define rte_lpm_lookup_bulk(lpm, ips, next_hops, n) \
+		rte_lpm_lookup_bulk_func(lpm, ips, next_hops, n)
+
+static inline int
+rte_lpm_lookup_bulk_func(const struct rte_lpm *lpm, const uint32_t * ips,
+		uint16_t * next_hops, const unsigned n)
+{
+	unsigned i;
+	unsigned tbl24_indexes[n];
+
+	/* DEBUG: Check user input arguments. */
+	RTE_LPM_RETURN_IF_TRUE(((lpm == NULL) || (ips == NULL) ||
+			(next_hops == NULL)), -EINVAL);
+
+	for (i = 0; i < n; i++) {
+		tbl24_indexes[i] = ips[i] >> 8;
+	}
+
+	for (i = 0; i < n; i++) {
+		/* Simply copy tbl24 entry to output */
+		next_hops[i] = *(const uint16_t *)&lpm->tbl24[tbl24_indexes[i]];
+
+		/* Overwrite output with tbl8 entry if needed */
+		if (unlikely((next_hops[i] & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+				RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+
+			unsigned tbl8_index = (uint8_t)ips[i] +
+					((uint8_t)next_hops[i] *
+					 RTE_LPM_TBL8_GROUP_NUM_ENTRIES);
+
+			next_hops[i] = *(const uint16_t *)&lpm->tbl8[tbl8_index];
+		}
+	}
+	return 0;
+}
+
+/* Mask four results. */
+#define	 RTE_LPM_MASKX4_RES	UINT64_C(0x00ff00ff00ff00ff)
+
+/**
+ * Lookup four IP addresses in an LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   Four IPs to be looked up in the LPM table
+ * @param hop
+ *   Next hop of the most specific rule found for IP (valid on lookup hit only).
+ *   This is an 4 elements array of two byte values.
+ *   If the lookup was succesfull for the given IP, then least significant byte
+ *   of the corresponding element is the  actual next hop and the most
+ *   significant byte is zero.
+ *   If the lookup for the given IP failed, then corresponding element would
+ *   contain default value, see description of then next parameter.
+ * @param defv
+ *   Default value to populate into corresponding element of hop[] array,
+ *   if lookup would fail.
+ */
+static inline void
+rte_lpm_lookupx4(const struct rte_lpm *lpm, __m128i ip, uint16_t hop[4],
+	uint16_t defv)
+{
+	__m128i i24;
+	rte_xmm_t i8;
+	uint16_t tbl[4];
+	uint64_t idx, pt;
+
+	const __m128i mask8 =
+		_mm_set_epi32(UINT8_MAX, UINT8_MAX, UINT8_MAX, UINT8_MAX);
+
+	/*
+	 * RTE_LPM_VALID_EXT_ENTRY_BITMASK for 4 LPM entries
+	 * as one 64-bit value (0x0300030003000300).
+	 */
+	const uint64_t mask_xv =
+		((uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK |
+		(uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK << 16 |
+		(uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK << 32 |
+		(uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK << 48);
+
+	/*
+	 * RTE_LPM_LOOKUP_SUCCESS for 4 LPM entries
+	 * as one 64-bit value (0x0100010001000100).
+	 */
+	const uint64_t mask_v =
+		((uint64_t)RTE_LPM_LOOKUP_SUCCESS |
+		(uint64_t)RTE_LPM_LOOKUP_SUCCESS << 16 |
+		(uint64_t)RTE_LPM_LOOKUP_SUCCESS << 32 |
+		(uint64_t)RTE_LPM_LOOKUP_SUCCESS << 48);
+
+	/* get 4 indexes for tbl24[]. */
+	i24 = _mm_srli_epi32(ip, CHAR_BIT);
+
+	/* extract values from tbl24[] */
+	idx = _mm_cvtsi128_si64(i24);
+	i24 = _mm_srli_si128(i24, sizeof(uint64_t));
+
+	tbl[0] = *(const uint16_t *)&lpm->tbl24[(uint32_t)idx];
+	tbl[1] = *(const uint16_t *)&lpm->tbl24[idx >> 32];
+
+	idx = _mm_cvtsi128_si64(i24);
+
+	tbl[2] = *(const uint16_t *)&lpm->tbl24[(uint32_t)idx];
+	tbl[3] = *(const uint16_t *)&lpm->tbl24[idx >> 32];
+
+	/* get 4 indexes for tbl8[]. */
+	i8.x = _mm_and_si128(ip, mask8);
+
+	pt = (uint64_t)tbl[0] |
+		(uint64_t)tbl[1] << 16 |
+		(uint64_t)tbl[2] << 32 |
+		(uint64_t)tbl[3] << 48;
+
+	/* search successfully finished for all 4 IP addresses. */
+	if (likely((pt & mask_xv) == mask_v)) {
+		uintptr_t ph = (uintptr_t)hop;
+		*(uint64_t *)ph = pt & RTE_LPM_MASKX4_RES;
+		return;
+	}
+
+	if (unlikely((pt & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+			RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+		i8.u32[0] = i8.u32[0] +
+			(uint8_t)tbl[0] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+		tbl[0] = *(const uint16_t *)&lpm->tbl8[i8.u32[0]];
+	}
+	if (unlikely((pt >> 16 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+			RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+		i8.u32[1] = i8.u32[1] +
+			(uint8_t)tbl[1] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+		tbl[1] = *(const uint16_t *)&lpm->tbl8[i8.u32[1]];
+	}
+	if (unlikely((pt >> 32 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+			RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+		i8.u32[2] = i8.u32[2] +
+			(uint8_t)tbl[2] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+		tbl[2] = *(const uint16_t *)&lpm->tbl8[i8.u32[2]];
+	}
+	if (unlikely((pt >> 48 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+			RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+		i8.u32[3] = i8.u32[3] +
+			(uint8_t)tbl[3] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+		tbl[3] = *(const uint16_t *)&lpm->tbl8[i8.u32[3]];
+	}
+
+	hop[0] = (tbl[0] & RTE_LPM_LOOKUP_SUCCESS) ? (uint8_t)tbl[0] : defv;
+	hop[1] = (tbl[1] & RTE_LPM_LOOKUP_SUCCESS) ? (uint8_t)tbl[1] : defv;
+	hop[2] = (tbl[2] & RTE_LPM_LOOKUP_SUCCESS) ? (uint8_t)tbl[2] : defv;
+	hop[3] = (tbl[3] & RTE_LPM_LOOKUP_SUCCESS) ? (uint8_t)tbl[3] : defv;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_LPM_H_ */
diff --git a/app/test/v2.0/rte_lpm6.h b/app/test/v2.0/rte_lpm6.h
new file mode 100644
index 000000000..4892a84e4
--- /dev/null
+++ b/app/test/v2.0/rte_lpm6.h
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
+ */
+#ifndef _RTE_LPM6_H_
+#define _RTE_LPM6_H_
+
+/**
+ * @file
+ * RTE Longest Prefix Match for IPv6 (LPM6)
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define RTE_LPM6_MAX_DEPTH               128
+#define RTE_LPM6_IPV6_ADDR_SIZE           16
+/** Max number of characters in LPM name. */
+#define RTE_LPM6_NAMESIZE                 32
+
+/** LPM structure. */
+struct rte_lpm6;
+
+/** LPM configuration structure. */
+struct rte_lpm6_config {
+	uint32_t max_rules;      /**< Max number of rules. */
+	uint32_t number_tbl8s;   /**< Number of tbl8s to allocate. */
+	int flags;               /**< This field is currently unused. */
+};
+
+/**
+ * Create an LPM object.
+ *
+ * @param name
+ *   LPM object name
+ * @param socket_id
+ *   NUMA socket ID for LPM table memory allocation
+ * @param config
+ *   Structure containing the configuration
+ * @return
+ *   Handle to LPM object on success, NULL otherwise with rte_errno set
+ *   to an appropriate values. Possible rte_errno values include:
+ *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ *    - E_RTE_SECONDARY - function was called from a secondary process instance
+ *    - EINVAL - invalid parameter passed to function
+ *    - ENOSPC - the maximum number of memzones has already been allocated
+ *    - EEXIST - a memzone with the same name already exists
+ *    - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_lpm6 *
+rte_lpm6_create(const char *name, int socket_id,
+		const struct rte_lpm6_config *config);
+
+/**
+ * Find an existing LPM object and return a pointer to it.
+ *
+ * @param name
+ *   Name of the lpm object as passed to rte_lpm6_create()
+ * @return
+ *   Pointer to lpm object or NULL if object not found with rte_errno
+ *   set appropriately. Possible rte_errno values include:
+ *    - ENOENT - required entry not available to return.
+ */
+struct rte_lpm6 *
+rte_lpm6_find_existing(const char *name);
+
+/**
+ * Free an LPM object.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @return
+ *   None
+ */
+void
+rte_lpm6_free(struct rte_lpm6 *lpm);
+
+/**
+ * Add a rule to the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP of the rule to be added to the LPM table
+ * @param depth
+ *   Depth of the rule to be added to the LPM table
+ * @param next_hop
+ *   Next hop of the rule to be added to the LPM table
+ * @return
+ *   0 on success, negative value otherwise
+ */
+int
+rte_lpm6_add(struct rte_lpm6 *lpm, uint8_t *ip, uint8_t depth,
+		uint8_t next_hop);
+
+/**
+ * Check if a rule is present in the LPM table,
+ * and provide its next hop if it is.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP of the rule to be searched
+ * @param depth
+ *   Depth of the rule to searched
+ * @param next_hop
+ *   Next hop of the rule (valid only if it is found)
+ * @return
+ *   1 if the rule exists, 0 if it does not, a negative value on failure
+ */
+int
+rte_lpm6_is_rule_present(struct rte_lpm6 *lpm, uint8_t *ip, uint8_t depth,
+uint8_t *next_hop);
+
+/**
+ * Delete a rule from the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP of the rule to be deleted from the LPM table
+ * @param depth
+ *   Depth of the rule to be deleted from the LPM table
+ * @return
+ *   0 on success, negative value otherwise
+ */
+int
+rte_lpm6_delete(struct rte_lpm6 *lpm, uint8_t *ip, uint8_t depth);
+
+/**
+ * Delete a rule from the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ips
+ *   Array of IPs to be deleted from the LPM table
+ * @param depths
+ *   Array of depths of the rules to be deleted from the LPM table
+ * @param n
+ *   Number of rules to be deleted from the LPM table
+ * @return
+ *   0 on success, negative value otherwise.
+ */
+int
+rte_lpm6_delete_bulk_func(struct rte_lpm6 *lpm,
+		uint8_t ips[][RTE_LPM6_IPV6_ADDR_SIZE], uint8_t *depths, unsigned n);
+
+/**
+ * Delete all rules from the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ */
+void
+rte_lpm6_delete_all(struct rte_lpm6 *lpm);
+
+/**
+ * Lookup an IP into the LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ip
+ *   IP to be looked up in the LPM table
+ * @param next_hop
+ *   Next hop of the most specific rule found for IP (valid on lookup hit only)
+ * @return
+ *   -EINVAL for incorrect arguments, -ENOENT on lookup miss, 0 on lookup hit
+ */
+int
+rte_lpm6_lookup(const struct rte_lpm6 *lpm, uint8_t *ip, uint8_t *next_hop);
+
+/**
+ * Lookup multiple IP addresses in an LPM table.
+ *
+ * @param lpm
+ *   LPM object handle
+ * @param ips
+ *   Array of IPs to be looked up in the LPM table
+ * @param next_hops
+ *   Next hop of the most specific rule found for IP (valid on lookup hit only).
+ *   This is an array of two byte values. The next hop will be stored on
+ *   each position on success; otherwise the position will be set to -1.
+ * @param n
+ *   Number of elements in ips (and next_hops) array to lookup.
+ *  @return
+ *   -EINVAL for incorrect arguments, otherwise 0
+ */
+int
+rte_lpm6_lookup_bulk_func(const struct rte_lpm6 *lpm,
+		uint8_t ips[][RTE_LPM6_IPV6_ADDR_SIZE],
+		int16_t * next_hops, unsigned n);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/app/test/v2.0/test_lpm.c b/app/test/v2.0/test_lpm.c
new file mode 100644
index 000000000..3ae4a121a
--- /dev/null
+++ b/app/test/v2.0/test_lpm.c
@@ -0,0 +1,1139 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ *
+ * LPM Autotests from DPDK v2.2.0 for v2.0 abi compability testing.
+ *
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_cycles.h>
+#include <rte_memory.h>
+#include <rte_random.h>
+#include <rte_branch_prediction.h>
+#include <rte_ip.h>
+#include <time.h>
+
+#include "../test.h"
+
+/* remapping of DPDK v2.0 symbols */
+#include "dcompat.h"
+/* backported header from DPDK v2.0 */
+#include "rte_lpm.h"
+#include "../test_lpm_routes.h"
+
+
+#define TEST_LPM_ASSERT(cond) do {                                            \
+	if (!(cond)) {                                                        \
+		printf("Error at line %d:\n", __LINE__);                      \
+		return -1;                                                    \
+	}                                                                     \
+} while (0)
+
+typedef int32_t (*rte_lpm_test)(void);
+
+static int32_t test0(void);
+static int32_t test1(void);
+static int32_t test2(void);
+static int32_t test3(void);
+static int32_t test4(void);
+static int32_t test5(void);
+static int32_t test6(void);
+static int32_t test7(void);
+static int32_t test8(void);
+static int32_t test9(void);
+static int32_t test10(void);
+static int32_t test11(void);
+static int32_t test12(void);
+static int32_t test13(void);
+static int32_t test14(void);
+static int32_t test15(void);
+static int32_t test16(void);
+static int32_t test17(void);
+
+static rte_lpm_test tests[] = {
+/* Test Cases */
+	test0,
+	test1,
+	test2,
+	test3,
+	test4,
+	test5,
+	test6,
+	test7,
+	test8,
+	test9,
+	test10,
+	test11,
+	test12,
+	test13,
+	test14,
+	test15,
+	test16,
+	test17,
+};
+
+#define NUM_LPM_TESTS (sizeof(tests)/sizeof(tests[0]))
+#define MAX_DEPTH 32
+#define MAX_RULES 256
+#define PASS 0
+
+/*
+ * Check that rte_lpm_create fails gracefully for incorrect user input
+ * arguments
+ */
+int32_t
+test0(void)
+{
+	struct rte_lpm *lpm = NULL;
+
+	/* rte_lpm_create: lpm name == NULL */
+	lpm = rte_lpm_create(NULL, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	/* rte_lpm_create: max_rules = 0 */
+	/* Note: __func__ inserts the function name, in this case "test0". */
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, 0, 0);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	/* socket_id < -1 is invalid */
+	lpm = rte_lpm_create(__func__, -2, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	return PASS;
+}
+
+/*
+ * Create lpm table then delete lpm table 100 times
+ * Use a slightly different rules size each time
+ * */
+int32_t
+test1(void)
+{
+	struct rte_lpm *lpm = NULL;
+	int32_t i;
+
+	/* rte_lpm_free: Free NULL */
+	for (i = 0; i < 100; i++) {
+		lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES - i, 0);
+		TEST_LPM_ASSERT(lpm != NULL);
+
+		rte_lpm_free(lpm);
+	}
+
+	/* Can not test free so return success */
+	return PASS;
+}
+
+/*
+ * Call rte_lpm_free for NULL pointer user input. Note: free has no return and
+ * therefore it is impossible to check for failure but this test is added to
+ * increase function coverage metrics and to validate that freeing null does
+ * not crash.
+ */
+int32_t
+test2(void)
+{
+	struct rte_lpm *lpm = NULL;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	rte_lpm_free(lpm);
+	rte_lpm_free(NULL);
+	return PASS;
+}
+
+/*
+ * Check that rte_lpm_add fails gracefully for incorrect user input arguments
+ */
+int32_t
+test3(void)
+{
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip = RTE_IPV4(0, 0, 0, 0);
+	uint8_t depth = 24, next_hop = 100;
+	int32_t status = 0;
+
+	/* rte_lpm_add: lpm == NULL */
+	status = rte_lpm_add(NULL, ip, depth, next_hop);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm_add: depth < 1 */
+	status = rte_lpm_add(lpm, ip, 0, next_hop);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm_add: depth > MAX_DEPTH */
+	status = rte_lpm_add(lpm, ip, (MAX_DEPTH + 1), next_hop);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Check that rte_lpm_delete fails gracefully for incorrect user input
+ * arguments
+ */
+int32_t
+test4(void)
+{
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip = RTE_IPV4(0, 0, 0, 0);
+	uint8_t depth = 24;
+	int32_t status = 0;
+
+	/* rte_lpm_delete: lpm == NULL */
+	status = rte_lpm_delete(NULL, ip, depth);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm_delete: depth < 1 */
+	status = rte_lpm_delete(lpm, ip, 0);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm_delete: depth > MAX_DEPTH */
+	status = rte_lpm_delete(lpm, ip, (MAX_DEPTH + 1));
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Check that rte_lpm_lookup fails gracefully for incorrect user input
+ * arguments
+ */
+int32_t
+test5(void)
+{
+#if defined(RTE_LIBRTE_LPM_DEBUG)
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip = RTE_IPV4(0, 0, 0, 0);
+	uint8_t next_hop_return = 0;
+	int32_t status = 0;
+
+	/* rte_lpm_lookup: lpm == NULL */
+	status = rte_lpm_lookup(NULL, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm_lookup: depth < 1 */
+	status = rte_lpm_lookup(lpm, ip, NULL);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm_free(lpm);
+#endif
+	return PASS;
+}
+
+
+
+/*
+ * Call add, lookup and delete for a single rule with depth <= 24
+ */
+int32_t
+test6(void)
+{
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip = RTE_IPV4(0, 0, 0, 0);
+	uint8_t depth = 24, next_hop_add = 100, next_hop_return = 0;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Call add, lookup and delete for a single rule with depth > 24
+ */
+
+int32_t
+test7(void)
+{
+	__m128i ipx4;
+	uint16_t hop[4];
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip = RTE_IPV4(0, 0, 0, 0);
+	uint8_t depth = 32, next_hop_add = 100, next_hop_return = 0;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	ipx4 = _mm_set_epi32(ip, ip + 0x100, ip - 0x100, ip);
+	rte_lpm_lookupx4(lpm, ipx4, hop, UINT16_MAX);
+	TEST_LPM_ASSERT(hop[0] == next_hop_add);
+	TEST_LPM_ASSERT(hop[1] == UINT16_MAX);
+	TEST_LPM_ASSERT(hop[2] == UINT16_MAX);
+	TEST_LPM_ASSERT(hop[3] == next_hop_add);
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Use rte_lpm_add to add rules which effect only the second half of the lpm
+ * table. Use all possible depths ranging from 1..32. Set the next hop = to the
+ * depth. Check lookup hit for on every add and check for lookup miss on the
+ * first half of the lpm table after each add. Finally delete all rules going
+ * backwards (i.e. from depth = 32 ..1) and carry out a lookup after each
+ * delete. The lookup should return the next_hop_add value related to the
+ * previous depth value (i.e. depth -1).
+ */
+int32_t
+test8(void)
+{
+	__m128i ipx4;
+	uint16_t hop[4];
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip1 = RTE_IPV4(127, 255, 255, 255), ip2 = RTE_IPV4(128, 0, 0, 0);
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Loop with rte_lpm_add. */
+	for (depth = 1; depth <= 32; depth++) {
+		/* Let the next_hop_add value = depth. Just for change. */
+		next_hop_add = depth;
+
+		status = rte_lpm_add(lpm, ip2, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		/* Check IP in first half of tbl24 which should be empty. */
+		status = rte_lpm_lookup(lpm, ip1, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+
+		status = rte_lpm_lookup(lpm, ip2, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+			(next_hop_return == next_hop_add));
+
+		ipx4 = _mm_set_epi32(ip2, ip1, ip2, ip1);
+		rte_lpm_lookupx4(lpm, ipx4, hop, UINT16_MAX);
+		TEST_LPM_ASSERT(hop[0] == UINT16_MAX);
+		TEST_LPM_ASSERT(hop[1] == next_hop_add);
+		TEST_LPM_ASSERT(hop[2] == UINT16_MAX);
+		TEST_LPM_ASSERT(hop[3] == next_hop_add);
+	}
+
+	/* Loop with rte_lpm_delete. */
+	for (depth = 32; depth >= 1; depth--) {
+		next_hop_add = (uint8_t) (depth - 1);
+
+		status = rte_lpm_delete(lpm, ip2, depth);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm_lookup(lpm, ip2, &next_hop_return);
+
+		if (depth != 1) {
+			TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add));
+		}
+		else {
+			TEST_LPM_ASSERT(status == -ENOENT);
+		}
+
+		status = rte_lpm_lookup(lpm, ip1, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+
+		ipx4 = _mm_set_epi32(ip1, ip1, ip2, ip2);
+		rte_lpm_lookupx4(lpm, ipx4, hop, UINT16_MAX);
+		if (depth != 1) {
+			TEST_LPM_ASSERT(hop[0] == next_hop_add);
+			TEST_LPM_ASSERT(hop[1] == next_hop_add);
+		} else {
+			TEST_LPM_ASSERT(hop[0] == UINT16_MAX);
+			TEST_LPM_ASSERT(hop[1] == UINT16_MAX);
+		}
+		TEST_LPM_ASSERT(hop[2] == UINT16_MAX);
+		TEST_LPM_ASSERT(hop[3] == UINT16_MAX);
+	}
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * - Add & lookup to hit invalid TBL24 entry
+ * - Add & lookup to hit valid TBL24 entry not extended
+ * - Add & lookup to hit valid extended TBL24 entry with invalid TBL8 entry
+ * - Add & lookup to hit valid extended TBL24 entry with valid TBL8 entry
+ *
+ */
+int32_t
+test9(void)
+{
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip, ip_1, ip_2;
+	uint8_t depth, depth_1, depth_2, next_hop_add, next_hop_add_1,
+		next_hop_add_2, next_hop_return;
+	int32_t status = 0;
+
+	/* Add & lookup to hit invalid TBL24 entry */
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Add & lookup to hit valid TBL24 entry not extended */
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 23;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	depth = 24;
+	next_hop_add = 101;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	depth = 24;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 23;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Add & lookup to hit valid extended TBL24 entry with invalid TBL8
+	 * entry */
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	ip = RTE_IPV4(128, 0, 0, 5);
+	depth = 32;
+	next_hop_add = 101;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Add & lookup to hit valid extended TBL24 entry with valid TBL8
+	 * entry */
+	ip_1 = RTE_IPV4(128, 0, 0, 0);
+	depth_1 = 25;
+	next_hop_add_1 = 101;
+
+	ip_2 = RTE_IPV4(128, 0, 0, 5);
+	depth_2 = 32;
+	next_hop_add_2 = 102;
+
+	next_hop_return = 0;
+
+	status = rte_lpm_add(lpm, ip_1, depth_1, next_hop_add_1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip_1, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_1));
+
+	status = rte_lpm_add(lpm, ip_2, depth_2, next_hop_add_2);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip_2, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_2));
+
+	status = rte_lpm_delete(lpm, ip_2, depth_2);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip_2, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_1));
+
+	status = rte_lpm_delete(lpm, ip_1, depth_1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip_1, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+
+/*
+ * - Add rule that covers a TBL24 range previously invalid & lookup (& delete &
+ *   lookup)
+ * - Add rule that extends a TBL24 invalid entry & lookup (& delete & lookup)
+ * - Add rule that extends a TBL24 valid entry & lookup for both rules (&
+ *   delete & lookup)
+ * - Add rule that updates the next hop in TBL24 & lookup (& delete & lookup)
+ * - Add rule that updates the next hop in TBL8 & lookup (& delete & lookup)
+ * - Delete a rule that is not present in the TBL24 & lookup
+ * - Delete a rule that is not present in the TBL8 & lookup
+ *
+ */
+int32_t
+test10(void)
+{
+
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip;
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	/* Add rule that covers a TBL24 range previously invalid & lookup
+	 * (& delete & lookup) */
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 16;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 25;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Add rule that extends a TBL24 valid entry & lookup for both rules
+	 * (& delete & lookup) */
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	ip = RTE_IPV4(128, 0, 0, 10);
+	depth = 32;
+	next_hop_add = 101;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	next_hop_add = 100;
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	ip = RTE_IPV4(128, 0, 0, 10);
+	depth = 32;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Add rule that updates the next hop in TBL24 & lookup
+	 * (& delete & lookup) */
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	next_hop_add = 101;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Add rule that updates the next hop in TBL8 & lookup
+	 * (& delete & lookup) */
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	next_hop_add = 101;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Delete a rule that is not present in the TBL24 & lookup */
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status < 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_delete_all(lpm);
+
+	/* Delete a rule that is not present in the TBL8 & lookup */
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 32;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status < 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add two rules, lookup to hit the more specific one, lookup to hit the less
+ * specific one delete the less specific rule and lookup previous values again;
+ * add a more specific rule than the existing rule, lookup again
+ *
+ * */
+int32_t
+test11(void)
+{
+
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip;
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	ip = RTE_IPV4(128, 0, 0, 10);
+	depth = 32;
+	next_hop_add = 101;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	next_hop_add = 100;
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	ip = RTE_IPV4(128, 0, 0, 10);
+	depth = 32;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add an extended rule (i.e. depth greater than 24, lookup (hit), delete,
+ * lookup (miss) in a for loop of 1000 times. This will check tbl8 extension
+ * and contraction.
+ *
+ * */
+
+int32_t
+test12(void)
+{
+	__m128i ipx4;
+	uint16_t hop[4];
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip, i;
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	for (i = 0; i < 1000; i++) {
+		status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add));
+
+		ipx4 = _mm_set_epi32(ip, ip + 1, ip, ip - 1);
+		rte_lpm_lookupx4(lpm, ipx4, hop, UINT16_MAX);
+		TEST_LPM_ASSERT(hop[0] == UINT16_MAX);
+		TEST_LPM_ASSERT(hop[1] == next_hop_add);
+		TEST_LPM_ASSERT(hop[2] == UINT16_MAX);
+		TEST_LPM_ASSERT(hop[3] == next_hop_add);
+
+		status = rte_lpm_delete(lpm, ip, depth);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+	}
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add a rule to tbl24, lookup (hit), then add a rule that will extend this
+ * tbl24 entry, lookup (hit). delete the rule that caused the tbl24 extension,
+ * lookup (miss) and repeat for loop of 1000 times. This will check tbl8
+ * extension and contraction.
+ *
+ * */
+
+int32_t
+test13(void)
+{
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip, i;
+	uint8_t depth, next_hop_add_1, next_hop_add_2, next_hop_return;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	ip = RTE_IPV4(128, 0, 0, 0);
+	depth = 24;
+	next_hop_add_1 = 100;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add_1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_1));
+
+	depth = 32;
+	next_hop_add_2 = 101;
+
+	for (i = 0; i < 1000; i++) {
+		status = rte_lpm_add(lpm, ip, depth, next_hop_add_2);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add_2));
+
+		status = rte_lpm_delete(lpm, ip, depth);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add_1));
+	}
+
+	depth = 24;
+
+	status = rte_lpm_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Fore TBL8 extension exhaustion. Add 256 rules that require a tbl8 extension.
+ * No more tbl8 extensions will be allowed. Now add one more rule that required
+ * a tbl8 extension and get fail.
+ * */
+int32_t
+test14(void)
+{
+
+	/* We only use depth = 32 in the loop below so we must make sure
+	 * that we have enough storage for all rules at that depth*/
+
+	struct rte_lpm *lpm = NULL;
+	uint32_t ip;
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	/* Add enough space for 256 rules for every depth */
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, 256 * 32, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	depth = 32;
+	next_hop_add = 100;
+	ip = RTE_IPV4(0, 0, 0, 0);
+
+	/* Add 256 rules that require a tbl8 extension */
+	for (; ip <= RTE_IPV4(0, 0, 255, 0); ip += 256) {
+		status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add));
+	}
+
+	/* All tbl8 extensions have been used above. Try to add one more and
+	 * we get a fail */
+	ip = RTE_IPV4(1, 0, 0, 0);
+	depth = 32;
+
+	status = rte_lpm_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Sequence of operations for find existing lpm table
+ *
+ *  - create table
+ *  - find existing table: hit
+ *  - find non-existing table: miss
+ *
+ */
+int32_t
+test15(void)
+{
+	struct rte_lpm *lpm = NULL, *result = NULL;
+
+	/* Create lpm  */
+	lpm = rte_lpm_create("lpm_find_existing", SOCKET_ID_ANY, 256 * 32, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Try to find existing lpm */
+	result = rte_lpm_find_existing("lpm_find_existing");
+	TEST_LPM_ASSERT(result == lpm);
+
+	/* Try to find non-existing lpm */
+	result = rte_lpm_find_existing("lpm_find_non_existing");
+	TEST_LPM_ASSERT(result == NULL);
+
+	/* Cleanup. */
+	rte_lpm_delete_all(lpm);
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * test failure condition of overloading the tbl8 so no more will fit
+ * Check we get an error return value in that case
+ */
+int32_t
+test16(void)
+{
+	uint32_t ip;
+	struct rte_lpm *lpm = rte_lpm_create(__func__, SOCKET_ID_ANY,
+			256 * 32, 0);
+
+	/* ip loops through all possibilities for top 24 bits of address */
+	for (ip = 0; ip < 0xFFFFFF; ip++){
+		/* add an entry within a different tbl8 each time, since
+		 * depth >24 and the top 24 bits are different */
+		if (rte_lpm_add(lpm, (ip << 8) + 0xF0, 30, 0) < 0)
+			break;
+	}
+
+	if (ip != RTE_LPM_TBL8_NUM_GROUPS) {
+		printf("Error, unexpected failure with filling tbl8 groups\n");
+		printf("Failed after %u additions, expected after %u\n",
+				(unsigned)ip, (unsigned)RTE_LPM_TBL8_NUM_GROUPS);
+	}
+
+	rte_lpm_free(lpm);
+	return 0;
+}
+
+/*
+ * Test for overwriting of tbl8:
+ *  - add rule /32 and lookup
+ *  - add new rule /24 and lookup
+ *	- add third rule /25 and lookup
+ *	- lookup /32 and /24 rule to ensure the table has not been overwritten.
+ */
+int32_t
+test17(void)
+{
+	struct rte_lpm *lpm = NULL;
+	const uint32_t ip_10_32 = RTE_IPV4(10, 10, 10, 2);
+	const uint32_t ip_10_24 = RTE_IPV4(10, 10, 10, 0);
+	const uint32_t ip_20_25 = RTE_IPV4(10, 10, 20, 2);
+	const uint8_t d_ip_10_32 = 32,
+			d_ip_10_24 = 24,
+			d_ip_20_25 = 25;
+	const uint8_t next_hop_ip_10_32 = 100,
+			next_hop_ip_10_24 = 105,
+			next_hop_ip_20_25 = 111;
+	uint8_t next_hop_return = 0;
+	int32_t status = 0;
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, MAX_RULES, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	if ((status = rte_lpm_add(lpm, ip_10_32, d_ip_10_32,
+			next_hop_ip_10_32)) < 0)
+		return -1;
+
+	status = rte_lpm_lookup(lpm, ip_10_32, &next_hop_return);
+	uint8_t test_hop_10_32 = next_hop_return;
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_32);
+
+	if ((status = rte_lpm_add(lpm, ip_10_24, d_ip_10_24,
+			next_hop_ip_10_24)) < 0)
+			return -1;
+
+	status = rte_lpm_lookup(lpm, ip_10_24, &next_hop_return);
+	uint8_t test_hop_10_24 = next_hop_return;
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_24);
+
+	if ((status = rte_lpm_add(lpm, ip_20_25, d_ip_20_25,
+			next_hop_ip_20_25)) < 0)
+		return -1;
+
+	status = rte_lpm_lookup(lpm, ip_20_25, &next_hop_return);
+	uint8_t test_hop_20_25 = next_hop_return;
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_20_25);
+
+	if (test_hop_10_32 == test_hop_10_24) {
+		printf("Next hop return equal\n");
+		return -1;
+	}
+
+	if (test_hop_10_24 == test_hop_20_25){
+		printf("Next hop return equal\n");
+		return -1;
+	}
+
+	status = rte_lpm_lookup(lpm, ip_10_32, &next_hop_return);
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_32);
+
+	status = rte_lpm_lookup(lpm, ip_10_24, &next_hop_return);
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_24);
+
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+
+/*
+ * Do all unit tests.
+ */
+
+static int
+test_lpm(void)
+{
+	unsigned int i;
+	int status, global_status = 0;
+
+	for (i = 0; i < NUM_LPM_TESTS; i++) {
+		status = tests[i]();
+		if (status < 0) {
+			printf("ERROR: LPM Test %s: FAIL\n", RTE_STR(tests[i]));
+			global_status = status;
+		}
+	}
+
+	return global_status;
+}
+
+REGISTER_TEST_COMMAND_VERSION(lpm_autotest,
+			      test_lpm, TEST_DPDK_ABI_VERSION_V20);
diff --git a/app/test/v2.0/test_lpm6.c b/app/test/v2.0/test_lpm6.c
new file mode 100644
index 000000000..6c6694259
--- /dev/null
+++ b/app/test/v2.0/test_lpm6.c
@@ -0,0 +1,1748 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ *
+ * LPM6 Autotests from DPDK v17.02 for v2.0 abi compatibility testing.
+ *
+ */
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+
+#include <rte_memory.h>
+/* remapping of DPDK v2.0 symbols */
+#include "dcompat.h"
+/* backported header from DPDK v2.0 */
+#include "rte_lpm6.h"
+
+#include "../test.h"
+#include "../test_lpm6_data.h"
+
+#define TEST_LPM_ASSERT(cond) do {                                            \
+	if (!(cond)) {                                                        \
+		printf("Error at line %d: \n", __LINE__);                     \
+		return -1;                                                    \
+	}                                                                     \
+} while(0)
+
+typedef int32_t (* rte_lpm6_test)(void);
+
+static int32_t test0(void);
+static int32_t test1(void);
+static int32_t test2(void);
+static int32_t test3(void);
+static int32_t test4(void);
+static int32_t test5(void);
+static int32_t test6(void);
+static int32_t test7(void);
+static int32_t test8(void);
+static int32_t test9(void);
+static int32_t test10(void);
+static int32_t test11(void);
+static int32_t test12(void);
+static int32_t test13(void);
+static int32_t test14(void);
+static int32_t test15(void);
+static int32_t test16(void);
+static int32_t test17(void);
+static int32_t test18(void);
+static int32_t test19(void);
+static int32_t test20(void);
+static int32_t test21(void);
+static int32_t test22(void);
+static int32_t test23(void);
+static int32_t test24(void);
+static int32_t test25(void);
+static int32_t test26(void);
+static int32_t test27(void);
+
+static rte_lpm6_test tests6[] = {
+/* Test Cases */
+	test0,
+	test1,
+	test2,
+	test3,
+	test4,
+	test5,
+	test6,
+	test7,
+	test8,
+	test9,
+	test10,
+	test11,
+	test12,
+	test13,
+	test14,
+	test15,
+	test16,
+	test17,
+	test18,
+	test19,
+	test20,
+	test21,
+	test22,
+	test23,
+	test24,
+	test25,
+	test26,
+	test27,
+};
+
+#define NUM_LPM6_TESTS                (sizeof(tests6)/sizeof(tests6[0]))
+#define MAX_DEPTH                                                    128
+#define MAX_RULES                                                1000000
+#define NUMBER_TBL8S                                           (1 << 16)
+#define MAX_NUM_TBL8S                                          (1 << 21)
+#define PASS 0
+
+static void
+IPv6(uint8_t *ip, uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4, uint8_t b5,
+		uint8_t b6, uint8_t b7, uint8_t b8, uint8_t b9, uint8_t b10,
+		uint8_t b11, uint8_t b12, uint8_t b13, uint8_t b14, uint8_t b15,
+		uint8_t b16)
+{
+	ip[0] = b1;
+	ip[1] = b2;
+	ip[2] = b3;
+	ip[3] = b4;
+	ip[4] = b5;
+	ip[5] = b6;
+	ip[6] = b7;
+	ip[7] = b8;
+	ip[8] = b9;
+	ip[9] = b10;
+	ip[10] = b11;
+	ip[11] = b12;
+	ip[12] = b13;
+	ip[13] = b14;
+	ip[14] = b15;
+	ip[15] = b16;
+}
+
+/*
+ * Check that rte_lpm6_create fails gracefully for incorrect user input
+ * arguments
+ */
+int32_t
+test0(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_create: lpm name == NULL */
+	lpm = rte_lpm6_create(NULL, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	/* rte_lpm6_create: max_rules = 0 */
+	/* Note: __func__ inserts the function name, in this case "test0". */
+	config.max_rules = 0;
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	/* socket_id < -1 is invalid */
+	config.max_rules = MAX_RULES;
+	lpm = rte_lpm6_create(__func__, -2, &config);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	/* rte_lpm6_create: number_tbl8s is bigger than the maximum */
+	config.number_tbl8s = MAX_NUM_TBL8S + 1;
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	/* rte_lpm6_create: config = NULL */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, NULL);
+	TEST_LPM_ASSERT(lpm == NULL);
+
+	return PASS;
+}
+
+/*
+ * Creates two different LPM tables. Tries to create a third one with the same
+ * name as the first one and expects the create function to return the same
+ * pointer.
+ */
+int32_t
+test1(void)
+{
+	struct rte_lpm6 *lpm1 = NULL, *lpm2 = NULL, *lpm3 = NULL;
+	struct rte_lpm6_config config;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_create: lpm name == LPM1 */
+	lpm1 = rte_lpm6_create("LPM1", SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm1 != NULL);
+
+	/* rte_lpm6_create: lpm name == LPM2 */
+	lpm2 = rte_lpm6_create("LPM2", SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm2 != NULL);
+
+	/* rte_lpm6_create: lpm name == LPM2 */
+	lpm3 = rte_lpm6_create("LPM1", SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm3 == NULL);
+
+	rte_lpm6_free(lpm1);
+	rte_lpm6_free(lpm2);
+
+	return PASS;
+}
+
+/*
+ * Create lpm table then delete lpm table 20 times
+ * Use a slightly different rules size each time
+ */
+int32_t
+test2(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	int32_t i;
+
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_free: Free NULL */
+	for (i = 0; i < 20; i++) {
+		config.max_rules = MAX_RULES - i;
+		lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+		TEST_LPM_ASSERT(lpm != NULL);
+
+		rte_lpm6_free(lpm);
+	}
+
+	/* Can not test free so return success */
+	return PASS;
+}
+
+/*
+ * Call rte_lpm6_free for NULL pointer user input. Note: free has no return and
+ * therefore it is impossible to check for failure but this test is added to
+ * increase function coverage metrics and to validate that freeing null does
+ * not crash.
+ */
+int32_t
+test3(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	rte_lpm6_free(lpm);
+	rte_lpm6_free(NULL);
+	return PASS;
+}
+
+/*
+ * Check that rte_lpm6_add fails gracefully for incorrect user input arguments
+ */
+int32_t
+test4(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth = 24, next_hop = 100;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_add: lpm == NULL */
+	status = rte_lpm6_add(NULL, ip, depth, next_hop);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm6_add: depth < 1 */
+	status = rte_lpm6_add(lpm, ip, 0, next_hop);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm6_add: depth > MAX_DEPTH */
+	status = rte_lpm6_add(lpm, ip, (MAX_DEPTH + 1), next_hop);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Check that rte_lpm6_delete fails gracefully for incorrect user input
+ * arguments
+ */
+int32_t
+test5(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth = 24;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm_delete: lpm == NULL */
+	status = rte_lpm6_delete(NULL, ip, depth);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm_delete: depth < 1 */
+	status = rte_lpm6_delete(lpm, ip, 0);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm_delete: depth > MAX_DEPTH */
+	status = rte_lpm6_delete(lpm, ip, (MAX_DEPTH + 1));
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Check that rte_lpm6_lookup fails gracefully for incorrect user input
+ * arguments
+ */
+int32_t
+test6(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t next_hop_return = 0;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_lookup: lpm == NULL */
+	status = rte_lpm6_lookup(NULL, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm6_lookup: ip = NULL */
+	status = rte_lpm6_lookup(lpm, NULL, &next_hop_return);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm6_lookup: next_hop = NULL */
+	status = rte_lpm6_lookup(lpm, ip, NULL);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Checks that rte_lpm6_lookup_bulk_func fails gracefully for incorrect user
+ * input arguments
+ */
+int32_t
+test7(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[10][16];
+	int16_t next_hop_return[10];
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_lookup: lpm == NULL */
+	status = rte_lpm6_lookup_bulk_func(NULL, ip, next_hop_return, 10);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm6_lookup: ip = NULL */
+	status = rte_lpm6_lookup_bulk_func(lpm, NULL, next_hop_return, 10);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm6_lookup: next_hop = NULL */
+	status = rte_lpm6_lookup_bulk_func(lpm, ip, NULL, 10);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Checks that rte_lpm6_delete_bulk_func fails gracefully for incorrect user
+ * input arguments
+ */
+int32_t
+test8(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[10][16];
+	uint8_t depth[10];
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* rte_lpm6_delete: lpm == NULL */
+	status = rte_lpm6_delete_bulk_func(NULL, ip, depth, 10);
+	TEST_LPM_ASSERT(status < 0);
+
+	/*Create vaild lpm to use in rest of test. */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* rte_lpm6_delete: ip = NULL */
+	status = rte_lpm6_delete_bulk_func(lpm, NULL, depth, 10);
+	TEST_LPM_ASSERT(status < 0);
+
+	/* rte_lpm6_delete: next_hop = NULL */
+	status = rte_lpm6_delete_bulk_func(lpm, ip, NULL, 10);
+	TEST_LPM_ASSERT(status < 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Call add, lookup and delete for a single rule with depth < 24.
+ * Check all the combinations for the first three bytes that result in a hit.
+ * Delete the rule and check that the same test returs a miss.
+ */
+int32_t
+test9(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth = 16, next_hop_add = 100, next_hop_return = 0;
+	int32_t status = 0;
+	uint8_t i;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	for (i = 0; i < UINT8_MAX; i++) {
+		ip[2] = i;
+		status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+	}
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	for (i = 0; i < UINT8_MAX; i++) {
+		ip[2] = i;
+		status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+	}
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Adds max_rules + 1 and expects a failure. Deletes a rule, then adds
+ * another one and expects success.
+ */
+int32_t
+test10(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth, next_hop_add = 100;
+	int32_t status = 0;
+	int i;
+
+	config.max_rules = 127;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	for (i = 1; i < 128; i++) {
+		depth = (uint8_t)i;
+		status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+	}
+
+	depth = 128;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == -ENOSPC);
+
+	depth = 127;
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 128;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Creates an LPM table with a small number of tbl8s and exhaust them in the
+ * middle of the process of creating a rule.
+ */
+int32_t
+test11(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth, next_hop_add = 100;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = 16;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	depth = 128;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	ip[0] = 1;
+	depth = 25;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 33;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 41;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 49;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == -ENOSPC);
+
+	depth = 41;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Creates an LPM table with a small number of tbl8s and exhaust them in the
+ * middle of the process of adding a rule when there is already an existing rule
+ * in that position and needs to be extended.
+ */
+int32_t
+test12(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth, next_hop_add = 100;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = 16;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	depth = 128;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	ip[0] = 1;
+	depth = 41;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 49;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == -ENOSPC);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Creates an LPM table with max_rules = 2 and tries to add 3 rules.
+ * Delete one of the rules and tries to add the third one again.
+ */
+int32_t
+test13(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth, next_hop_add = 100;
+	int32_t status = 0;
+
+	config.max_rules = 2;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	depth = 1;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 2;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 3;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == -ENOSPC);
+
+	depth = 2;
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 3;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add 2^12 routes with different first 12 bits and depth 25.
+ * Add one more route with the same depth and check that results in a failure.
+ * After that delete the last rule and create the one that was attempted to be
+ * created. This checks tbl8 exhaustion.
+ */
+int32_t
+test14(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth = 25, next_hop_add = 100;
+	int32_t status = 0;
+	int i;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = 256;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	for (i = 0; i < 256; i++) {
+		ip[0] = (uint8_t)i;
+		status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+	}
+
+	ip[0] = 255;
+	ip[1] = 1;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == -ENOSPC);
+
+	ip[0] = 255;
+	ip[1] = 0;
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	ip[0] = 255;
+	ip[1] = 1;
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Call add, lookup and delete for a single rule with depth = 24
+ */
+int32_t
+test15(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth = 24, next_hop_add = 100, next_hop_return = 0;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Call add, lookup and delete for a single rule with depth > 24
+ */
+int32_t
+test16(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[] = {12,12,1,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth = 128, next_hop_add = 100, next_hop_return = 0;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Use rte_lpm6_add to add rules which effect only the second half of the lpm
+ * table. Use all possible depths ranging from 1..32. Set the next hop = to the
+ * depth. Check lookup hit for on every add and check for lookup miss on the
+ * first half of the lpm table after each add. Finally delete all rules going
+ * backwards (i.e. from depth = 32 ..1) and carry out a lookup after each
+ * delete. The lookup should return the next_hop_add value related to the
+ * previous depth value (i.e. depth -1).
+ */
+int32_t
+test17(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip1[] = {127,255,255,255,255,255,255,255,255,
+			255,255,255,255,255,255,255};
+	uint8_t ip2[] = {128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Loop with rte_lpm6_add. */
+	for (depth = 1; depth <= 16; depth++) {
+		/* Let the next_hop_add value = depth. Just for change. */
+		next_hop_add = depth;
+
+		status = rte_lpm6_add(lpm, ip2, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		/* Check IP in first half of tbl24 which should be empty. */
+		status = rte_lpm6_lookup(lpm, ip1, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+
+		status = rte_lpm6_lookup(lpm, ip2, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+			(next_hop_return == next_hop_add));
+	}
+
+	/* Loop with rte_lpm6_delete. */
+	for (depth = 16; depth >= 1; depth--) {
+		next_hop_add = (uint8_t) (depth - 1);
+
+		status = rte_lpm6_delete(lpm, ip2, depth);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm6_lookup(lpm, ip2, &next_hop_return);
+
+		if (depth != 1) {
+			TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add));
+		}
+		else {
+			TEST_LPM_ASSERT(status == -ENOENT);
+		}
+
+		status = rte_lpm6_lookup(lpm, ip1, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+	}
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * - Add & lookup to hit invalid TBL24 entry
+ * - Add & lookup to hit valid TBL24 entry not extended
+ * - Add & lookup to hit valid extended TBL24 entry with invalid TBL8 entry
+ * - Add & lookup to hit valid extended TBL24 entry with valid TBL8 entry
+ */
+int32_t
+test18(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[16], ip_1[16], ip_2[16];
+	uint8_t depth, depth_1, depth_2, next_hop_add, next_hop_add_1,
+		next_hop_add_2, next_hop_return;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* Add & lookup to hit invalid TBL24 entry */
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/* Add & lookup to hit valid TBL24 entry not extended */
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 23;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	depth = 24;
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	depth = 24;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	depth = 23;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/* Add & lookup to hit valid extended TBL24 entry with invalid TBL8
+	 * entry.
+	 */
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	IPv6(ip, 128, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/* Add & lookup to hit valid extended TBL24 entry with valid TBL8
+	 * entry
+	 */
+	IPv6(ip_1, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth_1 = 25;
+	next_hop_add_1 = 101;
+
+	IPv6(ip_2, 128, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth_2 = 32;
+	next_hop_add_2 = 102;
+
+	next_hop_return = 0;
+
+	status = rte_lpm6_add(lpm, ip_1, depth_1, next_hop_add_1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip_1, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_1));
+
+	status = rte_lpm6_add(lpm, ip_2, depth_2, next_hop_add_2);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip_2, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_2));
+
+	status = rte_lpm6_delete(lpm, ip_2, depth_2);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip_2, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add_1));
+
+	status = rte_lpm6_delete(lpm, ip_1, depth_1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip_1, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * - Add rule that covers a TBL24 range previously invalid & lookup (& delete &
+ *   lookup)
+ * - Add rule that extends a TBL24 invalid entry & lookup (& delete & lookup)
+ * - Add rule that extends a TBL24 valid entry & lookup for both rules (&
+ *   delete & lookup)
+ * - Add rule that updates the next hop in TBL24 & lookup (& delete & lookup)
+ * - Add rule that updates the next hop in TBL8 & lookup (& delete & lookup)
+ * - Delete a rule that is not present in the TBL24 & lookup
+ * - Delete a rule that is not present in the TBL8 & lookup
+ */
+int32_t
+test19(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[16];
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* Add rule that covers a TBL24 range previously invalid & lookup
+	 * (& delete & lookup)
+	 */
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 16;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 25;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	rte_lpm6_delete_all(lpm);
+
+	/*
+	 * Add rule that extends a TBL24 valid entry & lookup for both rules
+	 * (& delete & lookup)
+	 */
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip, 128, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	next_hop_add = 100;
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	IPv6(ip, 128, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/*
+	 * Add rule that updates the next hop in TBL24 & lookup
+	 * (& delete & lookup)
+	 */
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/*
+	 * Add rule that updates the next hop in TBL8 & lookup
+	 * (& delete & lookup)
+	 */
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/* Delete a rule that is not present in the TBL24 & lookup */
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status < 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_delete_all(lpm);
+
+	/* Delete a rule that is not present in the TBL8 & lookup */
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 32;
+	next_hop_add = 100;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status < 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add two rules, lookup to hit the more specific one, lookup to hit the less
+ * specific one delete the less specific rule and lookup previous values again;
+ * add a more specific rule than the existing rule, lookup again
+ */
+int32_t
+test20(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[16];
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 10);
+	depth = 128;
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	next_hop_add = 100;
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT((status == 0) && (next_hop_return == next_hop_add));
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 24;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 10);
+	depth = 128;
+
+	status = rte_lpm6_delete(lpm, ip, depth);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+	TEST_LPM_ASSERT(status == -ENOENT);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Adds 3 rules and look them up through the lookup_bulk function.
+ * Includes in the lookup a fourth IP address that won't match
+ * and checks that the result is as expected.
+ */
+int32_t
+test21(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip_batch[4][16];
+	uint8_t depth, next_hop_add;
+	int16_t next_hop_return[4];
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	IPv6(ip_batch[0], 128, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 48;
+	next_hop_add = 100;
+
+	status = rte_lpm6_add(lpm, ip_batch[0], depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[1], 128, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 48;
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip_batch[1], depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[2], 128, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 48;
+	next_hop_add = 102;
+
+	status = rte_lpm6_add(lpm, ip_batch[2], depth, next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[3], 128, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+
+	status = rte_lpm6_lookup_bulk_func(lpm, ip_batch,
+			next_hop_return, 4);
+	TEST_LPM_ASSERT(status == 0 && next_hop_return[0] == 100
+			&& next_hop_return[1] == 101 && next_hop_return[2] == 102
+			&& next_hop_return[3] == -1);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Adds 5 rules and look them up.
+ * Use the delete_bulk function to delete two of them. Lookup again.
+ * Use the delete_bulk function to delete one more. Lookup again.
+ * Use the delete_bulk function to delete two more, one invalid. Lookup again.
+ * Use the delete_bulk function to delete the remaining one. Lookup again.
+ */
+int32_t
+test22(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip_batch[5][16];
+	uint8_t depth[5], next_hop_add;
+	int16_t next_hop_return[5];
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Adds 5 rules and look them up */
+
+	IPv6(ip_batch[0], 128, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth[0] = 48;
+	next_hop_add = 101;
+
+	status = rte_lpm6_add(lpm, ip_batch[0], depth[0], next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[1], 128, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth[1] = 48;
+	next_hop_add = 102;
+
+	status = rte_lpm6_add(lpm, ip_batch[1], depth[1], next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[2], 128, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth[2] = 48;
+	next_hop_add = 103;
+
+	status = rte_lpm6_add(lpm, ip_batch[2], depth[2], next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[3], 128, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth[3] = 48;
+	next_hop_add = 104;
+
+	status = rte_lpm6_add(lpm, ip_batch[3], depth[3], next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[4], 128, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth[4] = 48;
+	next_hop_add = 105;
+
+	status = rte_lpm6_add(lpm, ip_batch[4], depth[4], next_hop_add);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup_bulk_func(lpm, ip_batch,
+			next_hop_return, 5);
+	TEST_LPM_ASSERT(status == 0 && next_hop_return[0] == 101
+			&& next_hop_return[1] == 102 && next_hop_return[2] == 103
+			&& next_hop_return[3] == 104 && next_hop_return[4] == 105);
+
+	/* Use the delete_bulk function to delete two of them. Lookup again */
+
+	status = rte_lpm6_delete_bulk_func(lpm, &ip_batch[0], depth, 2);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup_bulk_func(lpm, ip_batch,
+			next_hop_return, 5);
+	TEST_LPM_ASSERT(status == 0 && next_hop_return[0] == -1
+			&& next_hop_return[1] == -1 && next_hop_return[2] == 103
+			&& next_hop_return[3] == 104 && next_hop_return[4] == 105);
+
+	/* Use the delete_bulk function to delete one more. Lookup again */
+
+	status = rte_lpm6_delete_bulk_func(lpm, &ip_batch[2], depth, 1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup_bulk_func(lpm, ip_batch,
+			next_hop_return, 5);
+	TEST_LPM_ASSERT(status == 0 && next_hop_return[0] == -1
+			&& next_hop_return[1] == -1 && next_hop_return[2] == -1
+			&& next_hop_return[3] == 104 && next_hop_return[4] == 105);
+
+	/* Use the delete_bulk function to delete two, one invalid. Lookup again */
+
+	IPv6(ip_batch[4], 128, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	status = rte_lpm6_delete_bulk_func(lpm, &ip_batch[3], depth, 2);
+	TEST_LPM_ASSERT(status == 0);
+
+	IPv6(ip_batch[4], 128, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	status = rte_lpm6_lookup_bulk_func(lpm, ip_batch,
+			next_hop_return, 5);
+	TEST_LPM_ASSERT(status == 0 && next_hop_return[0] == -1
+			&& next_hop_return[1] == -1 && next_hop_return[2] == -1
+			&& next_hop_return[3] == -1 && next_hop_return[4] == 105);
+
+	/* Use the delete_bulk function to delete the remaining one. Lookup again */
+
+	status = rte_lpm6_delete_bulk_func(lpm, &ip_batch[4], depth, 1);
+	TEST_LPM_ASSERT(status == 0);
+
+	status = rte_lpm6_lookup_bulk_func(lpm, ip_batch,
+			next_hop_return, 5);
+	TEST_LPM_ASSERT(status == 0 && next_hop_return[0] == -1
+			&& next_hop_return[1] == -1 && next_hop_return[2] == -1
+			&& next_hop_return[3] == -1 && next_hop_return[4] == -1);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add an extended rule (i.e. depth greater than 24, lookup (hit), delete,
+ * lookup (miss) in a for loop of 30 times. This will check tbl8 extension
+ * and contraction.
+ */
+int32_t
+test23(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint32_t i;
+	uint8_t ip[16];
+	uint8_t depth, next_hop_add, next_hop_return;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	IPv6(ip, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	depth = 128;
+	next_hop_add = 100;
+
+	for (i = 0; i < 30; i++) {
+		status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_add));
+
+		status = rte_lpm6_delete(lpm, ip, depth);
+		TEST_LPM_ASSERT(status == 0);
+
+		status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT(status == -ENOENT);
+	}
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Sequence of operations for find existing lpm table
+ *
+ *  - create table
+ *  - find existing table: hit
+ *  - find non-existing table: miss
+ */
+int32_t
+test24(void)
+{
+	struct rte_lpm6 *lpm = NULL, *result = NULL;
+	struct rte_lpm6_config config;
+
+	config.max_rules = 256 * 32;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	/* Create lpm  */
+	lpm = rte_lpm6_create("lpm_find_existing", SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Try to find existing lpm */
+	result = rte_lpm6_find_existing("lpm_find_existing");
+	TEST_LPM_ASSERT(result == lpm);
+
+	/* Try to find non-existing lpm */
+	result = rte_lpm6_find_existing("lpm_find_non_existing");
+	TEST_LPM_ASSERT(result == NULL);
+
+	/* Cleanup. */
+	rte_lpm6_delete_all(lpm);
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add a set of random routes with random depths.
+ * Lookup different IP addresses that match the routes previously added.
+ * Checks that the next hop is the expected one.
+ * The routes, IP addresses and expected result for every case have been
+ * precalculated by using a python script and stored in a .h file.
+ */
+int32_t
+test25(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip[16];
+	uint32_t i;
+	uint8_t depth, next_hop_add, next_hop_return, next_hop_expected;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	for (i = 0; i < 1000; i++) {
+		memcpy(ip, large_route_table[i].ip, 16);
+		depth = large_route_table[i].depth;
+		next_hop_add = large_route_table[i].next_hop;
+		status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+	}
+
+	/* generate large IPS table and expected next_hops */
+	generate_large_ips_table(1);
+
+	for (i = 0; i < 100000; i++) {
+		memcpy(ip, large_ips_table[i].ip, 16);
+		next_hop_expected = large_ips_table[i].next_hop;
+
+		status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+		TEST_LPM_ASSERT((status == 0) &&
+				(next_hop_return == next_hop_expected));
+	}
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Test for overwriting of tbl8:
+ *  - add rule /32 and lookup
+ *  - add new rule /24 and lookup
+ *	- add third rule /25 and lookup
+ *	- lookup /32 and /24 rule to ensure the table has not been overwritten.
+ */
+int32_t
+test26(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint8_t ip_10_32[] = {10, 10, 10, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	uint8_t ip_10_24[] = {10, 10, 10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	uint8_t ip_20_25[] = {10, 10, 20, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	uint8_t d_ip_10_32 = 32;
+	uint8_t	d_ip_10_24 = 24;
+	uint8_t	d_ip_20_25 = 25;
+	uint8_t next_hop_ip_10_32 = 100;
+	uint8_t	next_hop_ip_10_24 = 105;
+	uint8_t	next_hop_ip_20_25 = 111;
+	uint8_t next_hop_return = 0;
+	int32_t status = 0;
+
+	config.max_rules = MAX_RULES;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	if ((status = rte_lpm6_add(lpm, ip_10_32, d_ip_10_32,
+			next_hop_ip_10_32)) < 0)
+		return -1;
+
+	status = rte_lpm6_lookup(lpm, ip_10_32, &next_hop_return);
+	uint8_t test_hop_10_32 = next_hop_return;
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_32);
+
+	if ((status = rte_lpm6_add(lpm, ip_10_24, d_ip_10_24,
+			next_hop_ip_10_24)) < 0)
+			return -1;
+
+	status = rte_lpm6_lookup(lpm, ip_10_24, &next_hop_return);
+	uint8_t test_hop_10_24 = next_hop_return;
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_24);
+
+	if ((status = rte_lpm6_add(lpm, ip_20_25, d_ip_20_25,
+			next_hop_ip_20_25)) < 0)
+		return -1;
+
+	status = rte_lpm6_lookup(lpm, ip_20_25, &next_hop_return);
+	uint8_t test_hop_20_25 = next_hop_return;
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_20_25);
+
+	if (test_hop_10_32 == test_hop_10_24) {
+		printf("Next hop return equal\n");
+		return -1;
+	}
+
+	if (test_hop_10_24 == test_hop_20_25){
+		printf("Next hop return equal\n");
+		return -1;
+	}
+
+	status = rte_lpm6_lookup(lpm, ip_10_32, &next_hop_return);
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_32);
+
+	status = rte_lpm6_lookup(lpm, ip_10_24, &next_hop_return);
+	TEST_LPM_ASSERT(status == 0);
+	TEST_LPM_ASSERT(next_hop_return == next_hop_ip_10_24);
+
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+/*
+ * Add a rule that reaches the end of the tree.
+ * Add a rule that is more generic than the first one.
+ * Check every possible combination that produces a match for the second rule.
+ * This tests tbl expansion.
+ */
+int32_t
+test27(void)
+{
+		struct rte_lpm6 *lpm = NULL;
+		struct rte_lpm6_config config;
+		uint8_t ip[] = {128,128,128,128,128,128,128,128,128,128,128,128,128,128,0,0};
+		uint8_t depth = 128, next_hop_add = 100, next_hop_return;
+		int32_t status = 0;
+		int i, j;
+
+		config.max_rules = MAX_RULES;
+		config.number_tbl8s = NUMBER_TBL8S;
+		config.flags = 0;
+
+		lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+		TEST_LPM_ASSERT(lpm != NULL);
+
+		depth = 128;
+		next_hop_add = 128;
+		status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		depth = 112;
+		next_hop_add = 112;
+		status = rte_lpm6_add(lpm, ip, depth, next_hop_add);
+		TEST_LPM_ASSERT(status == 0);
+
+		for (i = 0; i < 256; i++) {
+			ip[14] = (uint8_t)i;
+			for (j = 0; j < 256; j++) {
+				ip[15] = (uint8_t)j;
+				status = rte_lpm6_lookup(lpm, ip, &next_hop_return);
+				if (i == 0 && j == 0)
+					TEST_LPM_ASSERT(status == 0 && next_hop_return == 128);
+				else
+					TEST_LPM_ASSERT(status == 0 && next_hop_return == 112);
+				}
+		}
+
+		rte_lpm6_free(lpm);
+
+		return PASS;
+}
+
+/*
+ * Do all unit and performance tests.
+ */
+static int
+test_lpm6(void)
+{
+	unsigned i;
+	int status = -1, global_status = 0;
+
+	for (i = 0; i < NUM_LPM6_TESTS; i++) {
+		printf("# test %02d\n", i);
+		status = tests6[i]();
+
+		if (status < 0) {
+			printf("ERROR: LPM Test %s: FAIL\n", RTE_STR(tests6[i]));
+			global_status = status;
+		}
+	}
+
+	return global_status;
+}
+
+REGISTER_TEST_COMMAND_VERSION(lpm6_autotest,
+			      test_lpm6, TEST_DPDK_ABI_VERSION_V20);
diff --git a/app/test/v2.0/test_lpm6_perf.c b/app/test/v2.0/test_lpm6_perf.c
new file mode 100644
index 000000000..abbd0a30e
--- /dev/null
+++ b/app/test/v2.0/test_lpm6_perf.c
@@ -0,0 +1,179 @@
+
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ *
+ * LPM6 Autotests from DPDK v17.02 for v2.0 abi compatibility testing.
+ *
+ */
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <rte_cycles.h>
+#include <rte_random.h>
+#include <rte_memory.h>
+
+/* remapping of DPDK v2.0 symbols */
+#include "dcompat.h"
+/* backported header from DPDK v2.0 */
+#include "rte_lpm6.h"
+
+#include "../test.h"
+#include "../test_lpm6_data.h"
+
+#define TEST_LPM_ASSERT(cond) do {              \
+    if (!(cond)) {                              \
+      printf("Error at line %d: \n", __LINE__); \
+      return -1;                                \
+    }                                           \
+  } while(0)
+
+static int32_t test_lpm6_perf(void);
+
+#define NUMBER_TBL8S                                           (1 << 16)
+#define PASS 0
+
+/*
+ * Lookup performance test
+ */
+
+#define ITERATIONS (1 << 10)
+#define BATCH_SIZE 100000
+
+static void
+print_route_distribution(const struct rules_tbl_entry *table, uint32_t n)
+{
+	unsigned i, j;
+
+	printf("Route distribution per prefix width: \n");
+	printf("DEPTH    QUANTITY (PERCENT)\n");
+	printf("--------------------------- \n");
+
+	/* Count depths. */
+	for(i = 1; i <= 128; i++) {
+		unsigned depth_counter = 0;
+		double percent_hits;
+
+		for (j = 0; j < n; j++)
+			if (table[j].depth == (uint8_t) i)
+				depth_counter++;
+
+		percent_hits = ((double)depth_counter)/((double)n) * 100;
+		printf("%.2u%15u (%.2f)\n", i, depth_counter, percent_hits);
+	}
+	printf("\n");
+}
+
+static int
+test_lpm6_perf(void)
+{
+	struct rte_lpm6 *lpm = NULL;
+	struct rte_lpm6_config config;
+	uint64_t begin, total_time;
+	unsigned i, j;
+	uint8_t next_hop_add = 0xAA, next_hop_return = 0;
+	int status = 0;
+	int64_t count = 0;
+
+	config.max_rules = 1000000;
+	config.number_tbl8s = NUMBER_TBL8S;
+	config.flags = 0;
+
+	rte_srand(rte_rdtsc());
+
+	printf("No. routes = %u\n", (unsigned) NUM_ROUTE_ENTRIES);
+
+	print_route_distribution(large_route_table, (uint32_t) NUM_ROUTE_ENTRIES);
+
+  /* Only generate IPv6 address of each item in large IPS table,
+	 * here next_hop is not needed.
+	 */
+	generate_large_ips_table(0);
+
+	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Measure add. */
+	begin = rte_rdtsc();
+
+	for (i = 0; i < NUM_ROUTE_ENTRIES; i++) {
+		if (rte_lpm6_add(lpm, large_route_table[i].ip,
+				large_route_table[i].depth, next_hop_add) == 0)
+			status++;
+	}
+	/* End Timer. */
+	total_time = rte_rdtsc() - begin;
+
+	printf("Unique added entries = %d\n", status);
+	printf("Average LPM Add: %g cycles\n",
+			(double)total_time / NUM_ROUTE_ENTRIES);
+
+	/* Measure single Lookup */
+	total_time = 0;
+	count = 0;
+
+	for (i = 0; i < ITERATIONS; i ++) {
+		begin = rte_rdtsc();
+
+		for (j = 0; j < NUM_IPS_ENTRIES; j ++) {
+			if (rte_lpm6_lookup(lpm, large_ips_table[j].ip,
+					&next_hop_return) != 0)
+				count++;
+		}
+
+		total_time += rte_rdtsc() - begin;
+
+	}
+	printf("Average LPM Lookup: %.1f cycles (fails = %.1f%%)\n",
+			(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
+			(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
+
+	/* Measure bulk Lookup */
+	total_time = 0;
+	count = 0;
+
+	uint8_t ip_batch[NUM_IPS_ENTRIES][16];
+	int16_t next_hops[NUM_IPS_ENTRIES];
+
+	for (i = 0; i < NUM_IPS_ENTRIES; i++)
+		memcpy(ip_batch[i], large_ips_table[i].ip, 16);
+
+	for (i = 0; i < ITERATIONS; i ++) {
+
+		/* Lookup per batch */
+		begin = rte_rdtsc();
+		rte_lpm6_lookup_bulk_func(lpm, ip_batch, next_hops, NUM_IPS_ENTRIES);
+		total_time += rte_rdtsc() - begin;
+
+		for (j = 0; j < NUM_IPS_ENTRIES; j++)
+			if (next_hops[j] < 0)
+				count++;
+	}
+	printf("BULK LPM Lookup: %.1f cycles (fails = %.1f%%)\n",
+			(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
+			(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
+
+	/* Delete */
+	status = 0;
+	begin = rte_rdtsc();
+
+	for (i = 0; i < NUM_ROUTE_ENTRIES; i++) {
+		/* rte_lpm_delete(lpm, ip, depth) */
+		status += rte_lpm6_delete(lpm, large_route_table[i].ip,
+				large_route_table[i].depth);
+	}
+
+	total_time += rte_rdtsc() - begin;
+
+	printf("Average LPM Delete: %g cycles\n",
+			(double)total_time / NUM_ROUTE_ENTRIES);
+
+	rte_lpm6_delete_all(lpm);
+	rte_lpm6_free(lpm);
+
+	return PASS;
+}
+
+REGISTER_TEST_COMMAND_VERSION(lpm6_perf_autotest,
+			      test_lpm6_perf, TEST_DPDK_ABI_VERSION_V20);
diff --git a/app/test/v2.0/test_lpm_perf.c b/app/test/v2.0/test_lpm_perf.c
new file mode 100644
index 000000000..3c16213fe
--- /dev/null
+++ b/app/test/v2.0/test_lpm_perf.c
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2019 Intel Corporation
+ *
+ * LPM Autotests from DPDK v2.2.0 for v2.0 abi compability testing.
+ *
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_cycles.h>
+#include <rte_memory.h>
+#include <rte_random.h>
+#include <rte_branch_prediction.h>
+#include <rte_ip.h>
+#include <time.h>
+
+#include "../test.h"
+
+/* remapping of DPDK v2.0 symbols */
+#include "dcompat.h"
+/* backported header from DPDK v2.0 */
+#include "rte_lpm.h"
+#include "../test_lpm_routes.h"
+
+#define TEST_LPM_ASSERT(cond) do {              \
+    if (!(cond)) {                              \
+      printf("Error at line %d:\n", __LINE__);  \
+      return -1;                                \
+    }                                           \
+  } while (0)
+
+
+#define PASS 0
+
+/*
+ * Lookup performance test
+ */
+
+#define ITERATIONS (1 << 10)
+#define BATCH_SIZE (1 << 12)
+#define BULK_SIZE 32
+
+static int32_t test_lpm_perf(void);
+
+int32_t
+test_lpm_perf(void)
+{
+	struct rte_lpm *lpm = NULL;
+	uint64_t begin, total_time, lpm_used_entries = 0;
+	unsigned i, j;
+	uint8_t next_hop_add = 0xAA, next_hop_return = 0;
+	int status = 0;
+	uint64_t cache_line_counter = 0;
+	int64_t count = 0;
+
+	rte_srand(rte_rdtsc());
+
+	/* (re) generate the routing table */
+	generate_large_route_rule_table();
+
+	printf("No. routes = %u\n", (unsigned) NUM_ROUTE_ENTRIES);
+
+	print_route_distribution(large_route_table,
+				 (uint32_t) NUM_ROUTE_ENTRIES);
+
+	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, 1000000, 0);
+	TEST_LPM_ASSERT(lpm != NULL);
+
+	/* Measue add. */
+	begin = rte_rdtsc();
+
+	for (i = 0; i < NUM_ROUTE_ENTRIES; i++) {
+		if (rte_lpm_add(lpm, large_route_table[i].ip,
+				large_route_table[i].depth, next_hop_add) == 0)
+			status++;
+	}
+	/* End Timer. */
+	total_time = rte_rdtsc() - begin;
+
+	printf("Unique added entries = %d\n", status);
+	/* Obtain add statistics. */
+	for (i = 0; i < RTE_LPM_TBL24_NUM_ENTRIES; i++) {
+		if (lpm->tbl24[i].valid)
+			lpm_used_entries++;
+
+		if (i % 32 == 0){
+			if ((uint64_t)count < lpm_used_entries) {
+				cache_line_counter++;
+				count = lpm_used_entries;
+			}
+		}
+	}
+
+	printf("Used table 24 entries = %u (%g%%)\n",
+			(unsigned) lpm_used_entries,
+			(lpm_used_entries * 100.0) / RTE_LPM_TBL24_NUM_ENTRIES);
+	printf("64 byte Cache entries used = %u (%u bytes)\n",
+			(unsigned) cache_line_counter, (unsigned) cache_line_counter * 64);
+
+	printf("Average LPM Add: %g cycles\n", (double)total_time / NUM_ROUTE_ENTRIES);
+
+	/* Measure single Lookup */
+	total_time = 0;
+	count = 0;
+
+	for (i = 0; i < ITERATIONS; i++) {
+		static uint32_t ip_batch[BATCH_SIZE];
+
+		for (j = 0; j < BATCH_SIZE; j++)
+			ip_batch[j] = rte_rand();
+
+		/* Lookup per batch */
+		begin = rte_rdtsc();
+
+		for (j = 0; j < BATCH_SIZE; j++) {
+			if (rte_lpm_lookup(lpm, ip_batch[j], &next_hop_return) != 0)
+				count++;
+		}
+
+		total_time += rte_rdtsc() - begin;
+
+	}
+	printf("Average LPM Lookup: %.1f cycles (fails = %.1f%%)\n",
+			(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
+			(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
+
+	/* Measure bulk Lookup */
+	total_time = 0;
+	count = 0;
+	for (i = 0; i < ITERATIONS; i++) {
+		static uint32_t ip_batch[BATCH_SIZE];
+		uint16_t next_hops[BULK_SIZE];
+
+		/* Create array of random IP addresses */
+		for (j = 0; j < BATCH_SIZE; j++)
+			ip_batch[j] = rte_rand();
+
+		/* Lookup per batch */
+		begin = rte_rdtsc();
+		for (j = 0; j < BATCH_SIZE; j += BULK_SIZE) {
+			unsigned k;
+			rte_lpm_lookup_bulk(lpm, &ip_batch[j], next_hops, BULK_SIZE);
+			for (k = 0; k < BULK_SIZE; k++)
+				if (unlikely(!(next_hops[k] & RTE_LPM_LOOKUP_SUCCESS)))
+					count++;
+		}
+
+		total_time += rte_rdtsc() - begin;
+	}
+	printf("BULK LPM Lookup: %.1f cycles (fails = %.1f%%)\n",
+			(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
+			(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
+
+	/* Measure LookupX4 */
+	total_time = 0;
+	count = 0;
+	for (i = 0; i < ITERATIONS; i++) {
+		static uint32_t ip_batch[BATCH_SIZE];
+		uint16_t next_hops[4];
+
+		/* Create array of random IP addresses */
+		for (j = 0; j < BATCH_SIZE; j++)
+			ip_batch[j] = rte_rand();
+
+		/* Lookup per batch */
+		begin = rte_rdtsc();
+		for (j = 0; j < BATCH_SIZE; j += RTE_DIM(next_hops)) {
+			unsigned k;
+			__m128i ipx4;
+
+			ipx4 = _mm_loadu_si128((__m128i *)(ip_batch + j));
+			ipx4 = *(__m128i *)(ip_batch + j);
+			rte_lpm_lookupx4(lpm, ipx4, next_hops, UINT16_MAX);
+			for (k = 0; k < RTE_DIM(next_hops); k++)
+				if (unlikely(next_hops[k] == UINT16_MAX))
+					count++;
+		}
+
+		total_time += rte_rdtsc() - begin;
+	}
+	printf("LPM LookupX4: %.1f cycles (fails = %.1f%%)\n",
+			(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
+			(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
+
+	/* Delete */
+	status = 0;
+	begin = rte_rdtsc();
+
+	for (i = 0; i < NUM_ROUTE_ENTRIES; i++) {
+		/* rte_lpm_delete(lpm, ip, depth) */
+		status += rte_lpm_delete(lpm, large_route_table[i].ip,
+				large_route_table[i].depth);
+	}
+
+	total_time += rte_rdtsc() - begin;
+
+	printf("Average LPM Delete: %g cycles\n",
+			(double)total_time / NUM_ROUTE_ENTRIES);
+
+	rte_lpm_delete_all(lpm);
+	rte_lpm_free(lpm);
+
+	return PASS;
+}
+
+REGISTER_TEST_COMMAND_VERSION(lpm_perf_autotest,
+			      test_lpm_perf, TEST_DPDK_ABI_VERSION_V20);
diff --git a/app/test/v2.0/test_v20.c b/app/test/v2.0/test_v20.c
new file mode 100644
index 000000000..6285e2882
--- /dev/null
+++ b/app/test/v2.0/test_v20.c
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+
+#include <rte_ip.h>
+#include <rte_lpm.h>
+
+#include "../test.h"
+
+REGISTER_TEST_ABI_VERSION(v20, TEST_DPDK_ABI_VERSION_V20);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test
  2019-08-22 16:07 [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Ray Kinsella
  2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 1/2] app/test: add abi version testing functionality Ray Kinsella
  2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 2/2] app/test: lpm abi version testing Ray Kinsella
@ 2019-08-23 15:49 ` Aaron Conole
  2019-08-26 16:45   ` Ray Kinsella
  2 siblings, 1 reply; 8+ messages in thread
From: Aaron Conole @ 2019-08-23 15:49 UTC (permalink / raw)
  To: Ray Kinsella
  Cc: dev, bruce.richardson, vladimir.medvedkin, john.mcnamara,
	marko.kovacevic

Ray Kinsella <mdr@ashroe.eu> writes:

> This patchset adds ABI version testing to the app/test unit test framework,
> addressing two issues previously raised during ML conversations on ABI
> stability;
>
> 1. How do we unit test still supported previous ABI versions?
> 2. How to we unit test inline functions from still supported previous ABI
> versions?
>
> Starting with rte_lpm, I did the following:-
>
> * I reproduced mostly unmodified unit tests for the v2.0 ABI, taken from DPDK
>   2.2 and 17.02.
> * I reproduced the rte_lpm interface header from v2.0, including the inline
>   functions and remapping symbols to their appropriate versions.
> * I added support for multiple abi versions to the app/test unit test framework
>   to allow users to switch between abi versions (set_abi_version), without
>   further polluting the already long list of unit tests available in app/test.
>
> The intention here is that in future as developers need to deprecate APIs, the
> associated unit tests may move into the ABI version testing mechanism of the
> app/test instead of being replaced by the latest set of unit tests as would be
> the case today.
>
> v2:
>
> * Added LPM IPv6 test cases for the v2.0 ABI.
> * Fixed a number of checkpatch errors, stop short of substantially reworking
>   the test code from the v2.0 ABI. 
> * Removed duplicating test cases published in the original v1 patch.

Thanks for this work.  I think it's useful.

I see an error under aarch64 builds because there are some x86_64
specific types being used in the testing.

See:

  https://travis-ci.com/ovsrobot/dpdk/builds/124254699

> Ray Kinsella (2):
>   app/test: add abi version testing functionality
>   app/test: lpm abi version testing
>
>  app/test/Makefile                          |   12 +-
>  app/test/commands.c                        |  131 +-
>  app/test/meson.build                       |    6 +
>  app/test/test.c                            |    2 +
>  app/test/test.h                            |   48 +-
>  app/test/test_lpm.c                        |    3 +-
>  app/test/test_lpm6.c                       |    2 +-
>  app/test/test_lpm_perf.c                   |  293 +---
>  app/test/test_lpm_routes.c                 |  287 ++++
>  app/test/test_lpm_routes.h                 |   25 +
>  app/test/v2.0/dcompat.h                    |   30 +
>  app/test/v2.0/rte_lpm.h                    |  451 +++++
>  app/test/v2.0/rte_lpm6.h                   |  198 +++
>  app/test/v2.0/test_lpm.c                   | 1139 +++++++++++++
>  app/test/v2.0/test_lpm6.c                  | 1748 ++++++++++++++++++++
>  app/test/v2.0/test_lpm6_perf.c             |  179 ++
>  app/test/v2.0/test_lpm_perf.c              |  212 +++
>  app/test/v2.0/test_v20.c                   |   14 +
>  doc/guides/contributing/versioning.rst     |    4 +
>  lib/librte_eal/common/include/rte_compat.h |    7 +
>  20 files changed, 4471 insertions(+), 320 deletions(-)
>  create mode 100644 app/test/test_lpm_routes.c
>  create mode 100644 app/test/test_lpm_routes.h
>  create mode 100644 app/test/v2.0/dcompat.h
>  create mode 100644 app/test/v2.0/rte_lpm.h
>  create mode 100644 app/test/v2.0/rte_lpm6.h
>  create mode 100644 app/test/v2.0/test_lpm.c
>  create mode 100644 app/test/v2.0/test_lpm6.c
>  create mode 100644 app/test/v2.0/test_lpm6_perf.c
>  create mode 100644 app/test/v2.0/test_lpm_perf.c
>  create mode 100644 app/test/v2.0/test_v20.c

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test
  2019-08-23 15:49 ` [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Aaron Conole
@ 2019-08-26 16:45   ` Ray Kinsella
  2019-08-27  8:17     ` Bruce Richardson
  0 siblings, 1 reply; 8+ messages in thread
From: Ray Kinsella @ 2019-08-26 16:45 UTC (permalink / raw)
  To: Aaron Conole
  Cc: dev, bruce.richardson, vladimir.medvedkin, john.mcnamara,
	marko.kovacevic



On 23/08/2019 16:49, Aaron Conole wrote:
> Ray Kinsella <mdr@ashroe.eu> writes:
> 
>> This patchset adds ABI version testing to the app/test unit test framework,
>> addressing two issues previously raised during ML conversations on ABI
>> stability;
>>
>> 1. How do we unit test still supported previous ABI versions?
>> 2. How to we unit test inline functions from still supported previous ABI
>> versions?
>>
>> Starting with rte_lpm, I did the following:-
>>
>> * I reproduced mostly unmodified unit tests for the v2.0 ABI, taken from DPDK
>>   2.2 and 17.02.
>> * I reproduced the rte_lpm interface header from v2.0, including the inline
>>   functions and remapping symbols to their appropriate versions.
>> * I added support for multiple abi versions to the app/test unit test framework
>>   to allow users to switch between abi versions (set_abi_version), without
>>   further polluting the already long list of unit tests available in app/test.
>>
>> The intention here is that in future as developers need to deprecate APIs, the
>> associated unit tests may move into the ABI version testing mechanism of the
>> app/test instead of being replaced by the latest set of unit tests as would be
>> the case today.
>>
>> v2:
>>
>> * Added LPM IPv6 test cases for the v2.0 ABI.
>> * Fixed a number of checkpatch errors, stop short of substantially reworking
>>   the test code from the v2.0 ABI. 
>> * Removed duplicating test cases published in the original v1 patch.
> 
> Thanks for this work.  I think it's useful.
> 
> I see an error under aarch64 builds because there are some x86_64
> specific types being used in the testing.

So the problem is that LPM didn't fully support ARM until DPDK v16.04.
The ABI versioning code in the LPM library is there to support the 2.0 ABI.

The intention of this unit test is to test backward's compatibility with
an inline LPM function from DPDK v2.2.0, which was essentially x86 only
at that time.

Unless we want to get into the business of backporting ARM support to
DPDK 2.2.0 (from where this test cases came from) - we should probably
restrict these ABI versioning test cases to CONFIG_RTE_ARCH_X86_64 only.

The other option is forget about testing this the LPM ABI versioning
support, which then asks the question should be perhaps excise that code
altogether.

Make sense?

Ray K



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test
  2019-08-26 16:45   ` Ray Kinsella
@ 2019-08-27  8:17     ` Bruce Richardson
  2019-08-27  8:28       ` Ray Kinsella
  0 siblings, 1 reply; 8+ messages in thread
From: Bruce Richardson @ 2019-08-27  8:17 UTC (permalink / raw)
  To: Ray Kinsella
  Cc: Aaron Conole, dev, vladimir.medvedkin, john.mcnamara, marko.kovacevic

On Mon, Aug 26, 2019 at 05:45:55PM +0100, Ray Kinsella wrote:
> 
> 
> On 23/08/2019 16:49, Aaron Conole wrote:
> > Ray Kinsella <mdr@ashroe.eu> writes:
> > 
> >> This patchset adds ABI version testing to the app/test unit test framework,
> >> addressing two issues previously raised during ML conversations on ABI
> >> stability;
> >>
> >> 1. How do we unit test still supported previous ABI versions?
> >> 2. How to we unit test inline functions from still supported previous ABI
> >> versions?
> >>
> >> Starting with rte_lpm, I did the following:-
> >>
> >> * I reproduced mostly unmodified unit tests for the v2.0 ABI, taken from DPDK
> >>   2.2 and 17.02.
> >> * I reproduced the rte_lpm interface header from v2.0, including the inline
> >>   functions and remapping symbols to their appropriate versions.
> >> * I added support for multiple abi versions to the app/test unit test framework
> >>   to allow users to switch between abi versions (set_abi_version), without
> >>   further polluting the already long list of unit tests available in app/test.
> >>
> >> The intention here is that in future as developers need to deprecate APIs, the
> >> associated unit tests may move into the ABI version testing mechanism of the
> >> app/test instead of being replaced by the latest set of unit tests as would be
> >> the case today.
> >>
> >> v2:
> >>
> >> * Added LPM IPv6 test cases for the v2.0 ABI.
> >> * Fixed a number of checkpatch errors, stop short of substantially reworking
> >>   the test code from the v2.0 ABI. 
> >> * Removed duplicating test cases published in the original v1 patch.
> > 
> > Thanks for this work.  I think it's useful.
> > 
> > I see an error under aarch64 builds because there are some x86_64
> > specific types being used in the testing.
> 
> So the problem is that LPM didn't fully support ARM until DPDK v16.04.
> The ABI versioning code in the LPM library is there to support the 2.0 ABI.
> 
> The intention of this unit test is to test backward's compatibility with
> an inline LPM function from DPDK v2.2.0, which was essentially x86 only
> at that time.
> 
> Unless we want to get into the business of backporting ARM support to
> DPDK 2.2.0 (from where this test cases came from) - we should probably
> restrict these ABI versioning test cases to CONFIG_RTE_ARCH_X86_64 only.
> 
> The other option is forget about testing this the LPM ABI versioning
> support, which then asks the question should be perhaps excise that code
> altogether.
>

I think function versioning is great and should be widely used.
Unfortunately, though, in our case since we break the ABI so consistently,
this old code is pretty useless. Therefore, I think we should remove all
old versionned code from e.g. pre-18.11, since no app is realistically
going to work from that far back anyway.

/Bruce 

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test
  2019-08-27  8:17     ` Bruce Richardson
@ 2019-08-27  8:28       ` Ray Kinsella
  2019-08-27 14:19         ` Ray Kinsella
  0 siblings, 1 reply; 8+ messages in thread
From: Ray Kinsella @ 2019-08-27  8:28 UTC (permalink / raw)
  To: Bruce Richardson
  Cc: Aaron Conole, dev, vladimir.medvedkin, john.mcnamara, marko.kovacevic



On 27/08/2019 09:17, Bruce Richardson wrote:
> On Mon, Aug 26, 2019 at 05:45:55PM +0100, Ray Kinsella wrote:
>>
>>
>> On 23/08/2019 16:49, Aaron Conole wrote:
>>> Ray Kinsella <mdr@ashroe.eu> writes:
>>>
>>>> This patchset adds ABI version testing to the app/test unit test framework,
>>>> addressing two issues previously raised during ML conversations on ABI
>>>> stability;
>>>>
>>>> 1. How do we unit test still supported previous ABI versions?
>>>> 2. How to we unit test inline functions from still supported previous ABI
>>>> versions?
>>>>
>>>> Starting with rte_lpm, I did the following:-
>>>>
>>>> * I reproduced mostly unmodified unit tests for the v2.0 ABI, taken from DPDK
>>>>   2.2 and 17.02.
>>>> * I reproduced the rte_lpm interface header from v2.0, including the inline
>>>>   functions and remapping symbols to their appropriate versions.
>>>> * I added support for multiple abi versions to the app/test unit test framework
>>>>   to allow users to switch between abi versions (set_abi_version), without
>>>>   further polluting the already long list of unit tests available in app/test.
>>>>
>>>> The intention here is that in future as developers need to deprecate APIs, the
>>>> associated unit tests may move into the ABI version testing mechanism of the
>>>> app/test instead of being replaced by the latest set of unit tests as would be
>>>> the case today.
>>>>
>>>> v2:
>>>>
>>>> * Added LPM IPv6 test cases for the v2.0 ABI.
>>>> * Fixed a number of checkpatch errors, stop short of substantially reworking
>>>>   the test code from the v2.0 ABI. 
>>>> * Removed duplicating test cases published in the original v1 patch.
>>>
>>> Thanks for this work.  I think it's useful.
>>>
>>> I see an error under aarch64 builds because there are some x86_64
>>> specific types being used in the testing.
>>
>> So the problem is that LPM didn't fully support ARM until DPDK v16.04.
>> The ABI versioning code in the LPM library is there to support the 2.0 ABI.
>>
>> The intention of this unit test is to test backward's compatibility with
>> an inline LPM function from DPDK v2.2.0, which was essentially x86 only
>> at that time.
>>
>> Unless we want to get into the business of backporting ARM support to
>> DPDK 2.2.0 (from where this test cases came from) - we should probably
>> restrict these ABI versioning test cases to CONFIG_RTE_ARCH_X86_64 only.
>>
>> The other option is forget about testing this the LPM ABI versioning
>> support, which then asks the question should be perhaps excise that code
>> altogether.
>>
> 
> I think function versioning is great and should be widely used.
> Unfortunately, though, in our case since we break the ABI so consistently,
> this old code is pretty useless. Therefore, I think we should remove all
> old versionned code from e.g. pre-18.11, since no app is realistically
> going to work from that far back anyway.
> 
> /Bruce 
> 

I had come to a similar conclusion, that we likely need to deprecate
much or all of the existing ABI Compatibility code, it needs a wider
review.

BIND_VERSION_SYMBOL and friends, are still needed to unit test ABI
Versioning, the general idea is sound. And I liked LPM as an example,
because it is well understood and contained, but I will look for
something more recent we could use instead.

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test
  2019-08-27  8:28       ` Ray Kinsella
@ 2019-08-27 14:19         ` Ray Kinsella
  0 siblings, 0 replies; 8+ messages in thread
From: Ray Kinsella @ 2019-08-27 14:19 UTC (permalink / raw)
  To: Bruce Richardson
  Cc: Aaron Conole, dev, vladimir.medvedkin, john.mcnamara, marko.kovacevic



On 27/08/2019 09:28, Ray Kinsella wrote:
> 
> 
> On 27/08/2019 09:17, Bruce Richardson wrote:
>> On Mon, Aug 26, 2019 at 05:45:55PM +0100, Ray Kinsella wrote:
>>>
>>>
>>> On 23/08/2019 16:49, Aaron Conole wrote:
>>>> Ray Kinsella <mdr@ashroe.eu> writes:
>>>>
>>>>> This patchset adds ABI version testing to the app/test unit test framework,
>>>>> addressing two issues previously raised during ML conversations on ABI
>>>>> stability;
>>>>>
>>>>> 1. How do we unit test still supported previous ABI versions?
>>>>> 2. How to we unit test inline functions from still supported previous ABI
>>>>> versions?
>>>>>
>>>>> Starting with rte_lpm, I did the following:-
>>>>>
>>>>> * I reproduced mostly unmodified unit tests for the v2.0 ABI, taken from DPDK
>>>>>   2.2 and 17.02.
>>>>> * I reproduced the rte_lpm interface header from v2.0, including the inline
>>>>>   functions and remapping symbols to their appropriate versions.
>>>>> * I added support for multiple abi versions to the app/test unit test framework
>>>>>   to allow users to switch between abi versions (set_abi_version), without
>>>>>   further polluting the already long list of unit tests available in app/test.
>>>>>
>>>>> The intention here is that in future as developers need to deprecate APIs, the
>>>>> associated unit tests may move into the ABI version testing mechanism of the
>>>>> app/test instead of being replaced by the latest set of unit tests as would be
>>>>> the case today.
>>>>>
>>>>> v2:
>>>>>
>>>>> * Added LPM IPv6 test cases for the v2.0 ABI.
>>>>> * Fixed a number of checkpatch errors, stop short of substantially reworking
>>>>>   the test code from the v2.0 ABI. 
>>>>> * Removed duplicating test cases published in the original v1 patch.
>>>>
>>>> Thanks for this work.  I think it's useful.
>>>>
>>>> I see an error under aarch64 builds because there are some x86_64
>>>> specific types being used in the testing.
>>>
>>> So the problem is that LPM didn't fully support ARM until DPDK v16.04.
>>> The ABI versioning code in the LPM library is there to support the 2.0 ABI.
>>>
>>> The intention of this unit test is to test backward's compatibility with
>>> an inline LPM function from DPDK v2.2.0, which was essentially x86 only
>>> at that time.
>>>
>>> Unless we want to get into the business of backporting ARM support to
>>> DPDK 2.2.0 (from where this test cases came from) - we should probably
>>> restrict these ABI versioning test cases to CONFIG_RTE_ARCH_X86_64 only.
>>>
>>> The other option is forget about testing this the LPM ABI versioning
>>> support, which then asks the question should be perhaps excise that code
>>> altogether.
>>>
>>
>> I think function versioning is great and should be widely used.
>> Unfortunately, though, in our case since we break the ABI so consistently,
>> this old code is pretty useless. Therefore, I think we should remove all
>> old versionned code from e.g. pre-18.11, since no app is realistically
>> going to work from that far back anyway.
>>
>> /Bruce 
>>
> 
> I had come to a similar conclusion, that we likely need to deprecate
> much or all of the existing ABI Compatibility code, it needs a wider
> review.
> 
> BIND_VERSION_SYMBOL and friends, are still needed to unit test ABI
> Versioning, the general idea is sound. And I liked LPM as an example,
> because it is well understood and contained, but I will look for
> something more recent we could use instead.
> 

Only recent example I can find of ABI versioning is the Timer Library,
changed in April 2019. After that are the distributor and the lpm
library both changes in 2017, does this seem right?

Ray K

root@xxx:/build/dpdk# find lib -name *.map | xargs -I{} -- git log -1
--format="%ai {}" {} | sort -k 1,2 | tail -n 10
2019-04-03 18:20:13 -0500 lib/librte_stack/rte_stack_version.map
2019-04-15 16:41:28 -0500 lib/librte_timer/rte_timer_version.map
2019-04-30 22:54:16 -0500 lib/librte_rcu/rte_rcu_version.map
2019-06-25 04:46:02 +0530 lib/librte_eventdev/rte_eventdev_version.map
2019-07-05 10:16:17 -0700 lib/librte_net/rte_net_version.map
2019-07-11 09:26:05 +0000 lib/librte_metrics/rte_metrics_version.map
2019-07-17 03:23:55 +0800 lib/librte_ring/rte_ring_version.map
2019-07-26 15:10:19 +0100 lib/librte_security/rte_security_version.map
2019-07-27 09:21:33 +0200 lib/librte_eal/rte_eal_version.map
2019-07-31 14:27:16 +0200 lib/librte_ethdev/rte_ethdev_version.map


root@xxx:/build/dpdk# find lib -name *.map | xargs -I{} -- git log -1
--format="%ai {}" {} | sort -k 1,2 | tail -n 50 | awk '{print $4}' |
xargs sort | uniq -c | sort -k 1


...
      2         rte_distributor_clear_returns;
      2         rte_distributor_create;
      2         rte_distributor_flush;
      2         rte_distributor_get_pkt;
      2         rte_distributor_poll_pkt;
      2         rte_distributor_process;
      2         rte_distributor_request_pkt;
      2         rte_distributor_returned_pkts;
      2         rte_distributor_return_pkt;
      2         rte_lpm6_add;
      2         rte_lpm6_is_rule_present;
      2         rte_lpm6_lookup;
      2         rte_lpm6_lookup_bulk_func;
      2         rte_lpm_add;
      2         rte_lpm_create;
      2         rte_lpm_delete;
      2         rte_lpm_delete_all;
      2         rte_lpm_find_existing;
      2         rte_lpm_free;
      2         rte_lpm_is_rule_present;
      2         rte_timer_dump_stats;
      2         rte_timer_manage;
      2         rte_timer_reset;
      2         rte_timer_stop;
      2         rte_timer_subsystem_init;
...






^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-08-27 14:19 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-22 16:07 [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Ray Kinsella
2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 1/2] app/test: add abi version testing functionality Ray Kinsella
2019-08-22 16:07 ` [dpdk-dev] [PATCH v2 2/2] app/test: lpm abi version testing Ray Kinsella
2019-08-23 15:49 ` [dpdk-dev] [PATCH v2 0/2] add abi version testing to app/test Aaron Conole
2019-08-26 16:45   ` Ray Kinsella
2019-08-27  8:17     ` Bruce Richardson
2019-08-27  8:28       ` Ray Kinsella
2019-08-27 14:19         ` Ray Kinsella

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).