* Re: [dpdk-dev] What's about "sfp module setup not complete"
@ 2013-06-12 4:05 lxu
0 siblings, 0 replies; 2+ messages in thread
From: lxu @ 2013-06-12 4:05 UTC (permalink / raw)
To: dev
[-- Attachment #1: Type: text/plain, Size: 1199 bytes --]
Finally I found it still a kernel issue.
There is kernel 2.6.32 in Redhat 6.3 and 6.4. After I rebuild and install kernel 3.4.47 with default configuration, everything is fine.
------------------ Original ------------------
From: "lxu"<lxu4net@qq.com>;
Date: Fri, May 31, 2013 00:16 AM
To: "dev"<dev@dpdk.org>;
Subject: What's about "sfp module setup not complete"
Hello, I'm testing DPDK 1.2.3r1 with Silicom PE210G2i9-T (82599EB) at Redhat 6.3 and 6.4.
I had followed the quick start guide. I installed DPDK and I haven't had any problems, but when I try to run testpmd it appears:
EAL: Error - exiting with code: 1
Cause: No probed ethernet devices - check that
CONFIG_RTE_LIBRTE_IGB_PMD=y that CONFIG_RTE_LIBRTE_IXGBE_PMD=y in your configuration file
In debug mode, I got detail messages:
sfp module setup not complete
...
PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30
After I checked source codes, I find it's IXGBE_ERR_SFP_SETUP_NOT_COMPLETE at the 218 line of dpdk-1.2.3r1/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c.
Is the Silicom PE210G2i9-T (82599EB) supported card? How can I fixed the error?
Thanks in advance.
[-- Attachment #2: Type: text/html, Size: 4353 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dpdk-dev] What's about "sfp module setup not complete"
@ 2013-05-30 16:16 lxu
0 siblings, 0 replies; 2+ messages in thread
From: lxu @ 2013-05-30 16:16 UTC (permalink / raw)
To: dev
[-- Attachment #1: Type: text/plain, Size: 805 bytes --]
Hello, I'm testing DPDK 1.2.3r1 with Silicom PE210G2i9-T (82599EB) at Redhat 6.3 and 6.4.
I had followed the quick start guide. I installed DPDK and I haven't had any problems, but when I try to run testpmd it appears:
EAL: Error - exiting with code: 1
Cause: No probed ethernet devices - check that
CONFIG_RTE_LIBRTE_IGB_PMD=y that CONFIG_RTE_LIBRTE_IXGBE_PMD=y in your configuration file
In debug mode, I got detail messages:
sfp module setup not complete
...
PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30
After I checked source codes, I find it's IXGBE_ERR_SFP_SETUP_NOT_COMPLETE at the 218 line of dpdk-1.2.3r1/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c.
Is the Silicom PE210G2i9-T (82599EB) supported card? How can I fixed the error?
Thanks in advance.
[-- Attachment #2: Type: text/html, Size: 3566 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-06-12 4:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-12 4:05 [dpdk-dev] What's about "sfp module setup not complete" lxu
-- strict thread matches above, loose matches on Subject: below --
2013-05-30 16:16 lxu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).