* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 @ 2015-09-24 3:47 Arthas 2015-09-24 5:38 ` Arthas 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-24 3:47 UTC (permalink / raw) To: zlu, dev Hi, Zhigang I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not work and exit. Command: run cat /proc/meminfo MemTotal: 8230464 kB MemFree: 3872576 kB Buffers: 0 kB Cached: 12480 kB SwapCached: 0 kB Active: 11200 kB Inactive: 5888 kB Active(anon): 11200 kB Inactive(anon): 5888 kB Active(file): 0 kB Inactive(file): 0 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 4736 kB Mapped: 3072 kB Shmem: 12480 kB Slab: 16256 kB SReclaimable: 768 kB SUnreclaim: 15488 kB KernelStack: 11648 kB PageTables: 4096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2018048 kB Committed_AS: 19328 kB VmallocTotal: 4194304 kB VmallocUsed: 224704 kB VmallocChunk: 3964864 kB Sequestered: 37184 kB HugePages_Total: 256 HugePages_Free: 256 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 16384 kB Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init instance 0 gxio_mpipe_init instance 1 EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0xc000000 bytes EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000) EAL: Ask a virtual area of 0xf4000000 bytes EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000) EAL: Requesting 128 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2]) EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3]) EAL: lcore 4 is ready (tid=e97af060;cpuset=[4]) EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5]) EAL: lcore 6 is ready (tid=e87af060;cpuset=[6]) EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7]) EAL: lcore 8 is ready (tid=dafff060;cpuset=[8]) EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9]) EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10]) EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11]) EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12]) EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14]) EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13]) EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15]) EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16]) EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17]) EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18]) EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20]) EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22]) EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=8efff060;cpuset=[24]) EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25]) EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26]) EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27]) EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28]) EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29]) EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30]) EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f. PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff. PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff. Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Thu, Sep 24, 2015 09:47 AM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas Seems like something wrong with memseg, could you try with " --hvx hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve hugepages for DPDK, and check there are still such errors. With regard to MDE-4.3.3, please contact your local tech support. Thanks -Zhigang >-----Original Message----- >From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >Sent: Wednesday, September 23, 2015 11:56 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, ZhiGang, > Can you tell me where can download TileraMDE-4.3.3 package? My tilegx >tech supporter only send me TileraMDE-4.2.4 version! >:) > >Thanks, > Arthas > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:41 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > I checked source code and debug it , found dpdk function rte_eth_tx_burst >with tilegx return 0 and no other error. Can I contact you directly? >Regards, > Arthas > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:35 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir >/tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >and testpmd start parameter is >tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 >--forward-mode=txonly -a --port-topology=chained -+- > > but xgbe1 can't xmit any packet. >This is my run log: > >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: No free hugepages reported in hugepages-1024kB >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x16000000 bytes >EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >EAL: Ask a virtual area of 0x90000000 bytes >EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >EAL: Ask a virtual area of 0x10000000 bytes >EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >EAL: Ask a virtual area of 0x46000000 bytes >EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) >Set txonly packet forwarding mode >Auto-start selected >Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex >Done >No commandline core given, start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >and another tilegx card output: >Command: run mpipe-stat xgbe1 >Link Tx pkt Tx bits Rx pkt Rx bits Tx err >Rx err >--------------------------------------------------------------------------- ----- >xgbe1 0 0 0 0 >0 0 > > > >Regards, Arthas > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Wed, Sep 23, 2015 03:34 PM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? > >>-----Original Message----- >>From: Arthas [mailto:kangzy1982@qq.com] >>Sent: Wednesday, September 23, 2015 1:21 PM >>To: dev >>Cc: zlu >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>and I wrote a sample RX example, got an other information. >> >> >>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >> >> >> >> Regards, Arthas >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 01:17 PM >>To: "dev"<dev@dpdk.org>; >>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for >tilegx. >>But I got a error with rte_mbuf rte_pktmbuf_append. >> >>PANIC in rte_mbuf_sanity_check(): >>bad phys addr >>7: [/trafgen(_start+0x70) [0x100b308]] >>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>5: [/trafgen(main+0x2148) [0x1017b78]] >>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >> >> >>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >> >> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-24 3:47 [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Arthas @ 2015-09-24 5:38 ` Arthas 2015-09-25 4:37 ` Arthas 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-24 5:38 UTC (permalink / raw) To: zlu, dev Hi, Zhigang, I checked error code and got a error information "(No more IOTLB entries)." & xmit function gxio_mpipe_equeue_try_reserve_fast got "Insufficient DMA credits"! Command: run ./testpmd -c 0xffffffff -m 6144 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init instance 0 gxio_mpipe_init instance 1 EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0x80000000 bytes EAL: Virtual area found at 0x1ff68000000 (size = 0x80000000) EAL: Ask a virtual area of 0xc000000 bytes EAL: Virtual area found at 0x1ff5b000000 (size = 0xc000000) EAL: Ask a virtual area of 0xf4000000 bytes EAL: Virtual area found at 0x1fe66000000 (size = 0xf4000000) EAL: Requesting 384 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7f94690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eaf3f060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea73f060;cpuset=[2]) EAL: lcore 3 is ready (tid=e9f3f060;cpuset=[3]) EAL: lcore 4 is ready (tid=e973f060;cpuset=[4]) EAL: lcore 5 is ready (tid=e8f3f060;cpuset=[5]) EAL: lcore 6 is ready (tid=67fff060;cpuset=[6]) EAL: lcore 7 is ready (tid=677ff060;cpuset=[7]) EAL: lcore 8 is ready (tid=5afff060;cpuset=[8]) EAL: lcore 9 is ready (tid=5a7ff060;cpuset=[9]) EAL: lcore 10 is ready (tid=65fff060;cpuset=[10]) EAL: lcore 11 is ready (tid=657ff060;cpuset=[11]) EAL: lcore 12 is ready (tid=64fff060;cpuset=[12]) EAL: lcore 13 is ready (tid=647ff060;cpuset=[13]) EAL: lcore 14 is ready (tid=3ffff060;cpuset=[14]) EAL: lcore 15 is ready (tid=3f7ff060;cpuset=[15]) EAL: lcore 16 is ready (tid=3efff060;cpuset=[16]) EAL: lcore 17 is ready (tid=3e7ff060;cpuset=[17]) EAL: lcore 18 is ready (tid=3dfff060;cpuset=[18]) EAL: lcore 19 is ready (tid=3d7ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=3cfff060;cpuset=[20]) EAL: lcore 21 is ready (tid=3c7ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=1bfff060;cpuset=[22]) EAL: lcore 23 is ready (tid=1b7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=1afff060;cpuset=[24]) EAL: lcore 25 is ready (tid=1a7ff060;cpuset=[25]) EAL: lcore 26 is ready (tid=19fff060;cpuset=[26]) EAL: lcore 27 is ready (tid=197ff060;cpuset=[27]) EAL: lcore 28 is ready (tid=18fff060;cpuset=[28]) EAL: lcore 29 is ready (tid=187ff060;cpuset=[29]) EAL: lcore 30 is ready (tid=f7fff060;cpuset=[30]) EAL: lcore 31 is ready (tid=f77ff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Could not register memseg @0x1ff68000000, -1111(No more IOTLB entries). PMD: xgbe1: Could not register memseg @0x1ff5b000000, -1111(No more IOTLB entries). PMD: xgbe1: Could not register memseg @0x1fe66000000, -1111(No more IOTLB entries). PMD: xgbe1: Buffer stack memory 0x1ff63780000 - 0x1ff637d557f. PMD: xgbe1: eDMA ring memory 0x1ff637d8000 - 0x1ff637d9fff. PMD: xgbe1: iDMA ring 0 memory 0x1ff6377c000 - 0x1ff6377dfff. PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported PMD: rte_eth_allmulticast_disable: Function not supported Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit Command: run cat /proc/meminfo MemTotal: 8230464 kB MemFree: 1765120 kB Buffers: 0 kB Cached: 42432 kB SwapCached: 0 kB Active: 27776 kB Inactive: 8448 kB Active(anon): 27776 kB Inactive(anon): 8448 kB Active(file): 0 kB Inactive(file): 0 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 0 kB Mapped: 3008 kB Shmem: 17856 kB Slab: 17984 kB SReclaimable: 1280 kB SUnreclaim: 16704 kB KernelStack: 11456 kB PageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 969472 kB Committed_AS: 41280 kB VmallocTotal: 4194304 kB VmallocUsed: 224704 kB VmallocChunk: 3964864 kB Sequestered: 50816 kB HugePages_Total: 384 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 16384 kB ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Thu, Sep 24, 2015 11:47 AM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Zhigang I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not work and exit. Command: run cat /proc/meminfo MemTotal: 8230464 kB MemFree: 3872576 kB Buffers: 0 kB Cached: 12480 kB SwapCached: 0 kB Active: 11200 kB Inactive: 5888 kB Active(anon): 11200 kB Inactive(anon): 5888 kB Active(file): 0 kB Inactive(file): 0 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 4736 kB Mapped: 3072 kB Shmem: 12480 kB Slab: 16256 kB SReclaimable: 768 kB SUnreclaim: 15488 kB KernelStack: 11648 kB PageTables: 4096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2018048 kB Committed_AS: 19328 kB VmallocTotal: 4194304 kB VmallocUsed: 224704 kB VmallocChunk: 3964864 kB Sequestered: 37184 kB HugePages_Total: 256 HugePages_Free: 256 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 16384 kB Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init instance 0 gxio_mpipe_init instance 1 EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0xc000000 bytes EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000) EAL: Ask a virtual area of 0xf4000000 bytes EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000) EAL: Requesting 128 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2]) EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3]) EAL: lcore 4 is ready (tid=e97af060;cpuset=[4]) EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5]) EAL: lcore 6 is ready (tid=e87af060;cpuset=[6]) EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7]) EAL: lcore 8 is ready (tid=dafff060;cpuset=[8]) EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9]) EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10]) EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11]) EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12]) EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14]) EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13]) EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15]) EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16]) EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17]) EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18]) EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20]) EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22]) EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=8efff060;cpuset=[24]) EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25]) EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26]) EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27]) EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28]) EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29]) EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30]) EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f. PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff. PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff. Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Thu, Sep 24, 2015 09:47 AM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas Seems like something wrong with memseg, could you try with " --hvx hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve hugepages for DPDK, and check there are still such errors. With regard to MDE-4.3.3, please contact your local tech support. Thanks -Zhigang >-----Original Message----- >From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >Sent: Wednesday, September 23, 2015 11:56 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, ZhiGang, > Can you tell me where can download TileraMDE-4.3.3 package? My tilegx >tech supporter only send me TileraMDE-4.2.4 version! >:) > >Thanks, > Arthas > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:41 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > I checked source code and debug it , found dpdk function rte_eth_tx_burst >with tilegx return 0 and no other error. Can I contact you directly? >Regards, > Arthas > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:35 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir >/tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >and testpmd start parameter is >tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 >--forward-mode=txonly -a --port-topology=chained -+- > > but xgbe1 can't xmit any packet. >This is my run log: > >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: No free hugepages reported in hugepages-1024kB >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x16000000 bytes >EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >EAL: Ask a virtual area of 0x90000000 bytes >EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >EAL: Ask a virtual area of 0x10000000 bytes >EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >EAL: Ask a virtual area of 0x46000000 bytes >EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) >Set txonly packet forwarding mode >Auto-start selected >Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex >Done >No commandline core given, start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >and another tilegx card output: >Command: run mpipe-stat xgbe1 >Link Tx pkt Tx bits Rx pkt Rx bits Tx err >Rx err >--------------------------------------------------------------------------- ----- >xgbe1 0 0 0 0 >0 0 > > > >Regards, Arthas > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Wed, Sep 23, 2015 03:34 PM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? > >>-----Original Message----- >>From: Arthas [mailto:kangzy1982@qq.com] >>Sent: Wednesday, September 23, 2015 1:21 PM >>To: dev >>Cc: zlu >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>and I wrote a sample RX example, got an other information. >> >> >>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >> >> >> >> Regards, Arthas >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 01:17 PM >>To: "dev"<dev@dpdk.org>; >>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for >tilegx. >>But I got a error with rte_mbuf rte_pktmbuf_append. >> >>PANIC in rte_mbuf_sanity_check(): >>bad phys addr >>7: [/trafgen(_start+0x70) [0x100b308]] >>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>5: [/trafgen(main+0x2148) [0x1017b78]] >>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >> >> >>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >> >> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-24 5:38 ` Arthas @ 2015-09-25 4:37 ` Arthas 2015-09-25 14:44 ` Tony Lu 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-25 4:37 UTC (permalink / raw) To: zlu, dev Hi, Zhigang, I fixed register memseg error, but gxio_mpipe_equeue_put_at send packet still failed. Command: run cat /proc/meminfo MemTotal: 8230016 kB MemFree: 3866688 kB Buffers: 0 kB Cached: 16576 kB SwapCached: 0 kB Active: 11392 kB Inactive: 9088 kB Active(anon): 11392 kB Inactive(anon): 9088 kB Active(file): 0 kB Inactive(file): 0 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 0 kB Mapped: 3072 kB Shmem: 16320 kB Slab: 17024 kB SReclaimable: 768 kB SUnreclaim: 16256 kB KernelStack: 11456 kB PageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2017856 kB Committed_AS: 22976 kB VmallocTotal: 4194304 kB VmallocUsed: 224704 kB VmallocChunk: 3964864 kB Sequestered: 46144 kB HugePages_Total: 4 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 1048576 kB _init_dpdk_eal_params: -c 0xffffffff -m 4096 -r 1 -n 1 --log-level 8 --vdev xgbe1 --vdev xgbe2 --log-level 8 --no-hpet main: rte_eal_init. EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0x100000000 bytes EAL: Virtual area found at 0x1fe40000000 (size = 0x100000000) EAL: Requesting 4 pages of size 1024MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7f34690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). PMD: mpipe init xgbe2 PMD: xgbe2: Initialized mpipe device(mac ee:d1:53:72:82:5b). EAL: lcore 1 is ready (tid=eb1df060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea9df060;cpuset=[2]) EAL: lcore 3 is ready (tid=ea1df060;cpuset=[3]) EAL: lcore 4 is ready (tid=e99df060;cpuset=[4]) EAL: lcore 5 is ready (tid=e91df060;cpuset=[5]) EAL: lcore 6 is ready (tid=e89df060;cpuset=[6]) EAL: lcore 7 is ready (tid=dbfff060;cpuset=[7]) EAL: lcore 8 is ready (tid=db7ff060;cpuset=[8]) EAL: lcore 9 is ready (tid=dafff060;cpuset=[9]) EAL: lcore 10 is ready (tid=da7ff060;cpuset=[10]) EAL: lcore 11 is ready (tid=d9fff060;cpuset=[11]) EAL: lcore 12 is ready (tid=d97ff060;cpuset=[12]) EAL: lcore 13 is ready (tid=d8fff060;cpuset=[13]) EAL: lcore 15 is ready (tid=bbfff060;cpuset=[15]) EAL: lcore 14 is ready (tid=d87ff060;cpuset=[14]) EAL: lcore 16 is ready (tid=bb7ff060;cpuset=[16]) EAL: lcore 17 is ready (tid=bafff060;cpuset=[17]) EAL: lcore 18 is ready (tid=ba7ff060;cpuset=[18]) EAL: lcore 19 is ready (tid=b9fff060;cpuset=[19]) EAL: lcore 20 is ready (tid=b97ff060;cpuset=[20]) EAL: lcore 21 is ready (tid=b8fff060;cpuset=[21]) EAL: lcore 22 is ready (tid=b87ff060;cpuset=[22]) EAL: lcore 23 is ready (tid=93fff060;cpuset=[23]) EAL: lcore 24 is ready (tid=937ff060;cpuset=[24]) EAL: lcore 25 is ready (tid=92fff060;cpuset=[25]) EAL: lcore 26 is ready (tid=927ff060;cpuset=[26]) EAL: lcore 27 is ready (tid=91fff060;cpuset=[27]) EAL: lcore 28 is ready (tid=917ff060;cpuset=[28]) EAL: lcore 29 is ready (tid=90fff060;cpuset=[29]) EAL: lcore 30 is ready (tid=907ff060;cpuset=[30]) EAL: lcore 31 is ready (tid=73fff060;cpuset=[31]) main: Detect CPU freq 1200000000 main: Detect 32 CPU cores main: Probe PCI ethernet devices. main: Detect 2 Ethernet device main: pid=2169 _eth_dev_init: Init port 0 mbuf pool pkt_len=1986 nr_pkts=17536 cache=512 _eth_dev_init: Init port 0 mbuf pool pkt_len=1730 nr_pkts=17536 cache=512 pool=0x0x1ff36e3f5c0 success. _eth_dev_init: Configure port 0 nr_tx=1 nr_rx=1 _eth_dev_init: Configure port 0 rxq=0 rxd=128 PMD: Allocate 128 iqueue descs. PMD: Init mPIPE buffer stack size index 3 _eth_dev_init: port 0: EE:D1:53:72:82:5A _eth_dev_init: Configure port 0 txq=0 txd=1024 PMD: Allocate one NotifRing for each queue. max=16 PMD: Allocate a NotifGroup. PMD: Allocate 256 buckets. PMD: Allocate 1 mPIPE buffer stack. PMD: gxio_mpipe_register_page . PMD: Register mPIPE page 0x1fe40000000 size=1073741824, log2=30 must < 40 & > 12 PMD: Register mPIPE page 0x1fe80000000 size=1073741824, log2=30 must < 40 & > 12 PMD: Register mPIPE page 0x1fec0000000 size=1073741824, log2=30 must < 40 & > 12 PMD: Register mPIPE page 0x1ff00000000 size=1073741824, log2=30 must < 40 & > 12 PMD: xgbe1: Registered segment 0x1fe40000000 - 0x1ff3fffffff PMD: Allocate mPIPE buffer stack size=65536 341K bytes.. PMD: xgbe1: Buffer stack memory 0x1ff36de0000 - 0x1ff36e3557f. PMD: xgbe1: eDMA ring memory 0x1ff36e3c000 - 0x1ff36e3dfff. PMD: xgbe1: iDMA ring 0 memory 0x1ff36e38000 - 0x1ff36e39fff. PMD: xgbe1: Pushed mbuf 0x1ff3a550080, buffer 0x1ff3a550202 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54f800, buffer 0x1ff3a54f982 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54ef80, buffer 0x1ff3a54f102 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54e700, buffer 0x1ff3a54e882 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54de80, buffer 0x1ff3a54e002 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54d600, buffer 0x1ff3a54d782 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54cd80, buffer 0x1ff3a54cf02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54c500, buffer 0x1ff3a54c682 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54bc80, buffer 0x1ff3a54be02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54b400, buffer 0x1ff3a54b582 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54ab80, buffer 0x1ff3a54ad02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a54a300, buffer 0x1ff3a54a482 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a549a80, buffer 0x1ff3a549c02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a549200, buffer 0x1ff3a549382 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a548980, buffer 0x1ff3a548b02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a548100, buffer 0x1ff3a548282 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a547880, buffer 0x1ff3a547a02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a547000, buffer 0x1ff3a547182 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a546780, buffer 0x1ff3a546902 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a545f00, buffer 0x1ff3a546082 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a545680, buffer 0x1ff3a545802 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a544e00, buffer 0x1ff3a544f82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a544580, buffer 0x1ff3a544702 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a543d00, buffer 0x1ff3a543e82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a543480, buffer 0x1ff3a543602 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a542c00, buffer 0x1ff3a542d82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a542380, buffer 0x1ff3a542502 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a541b00, buffer 0x1ff3a541c82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a541280, buffer 0x1ff3a541402 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a540a00, buffer 0x1ff3a540b82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a540180, buffer 0x1ff3a540302 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53f900, buffer 0x1ff3a53fa82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53f080, buffer 0x1ff3a53f202 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53e800, buffer 0x1ff3a53e982 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53df80, buffer 0x1ff3a53e102 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53d700, buffer 0x1ff3a53d882 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53ce80, buffer 0x1ff3a53d002 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53c600, buffer 0x1ff3a53c782 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53bd80, buffer 0x1ff3a53bf02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53b500, buffer 0x1ff3a53b682 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53ac80, buffer 0x1ff3a53ae02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a53a400, buffer 0x1ff3a53a582 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a539b80, buffer 0x1ff3a539d02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a539300, buffer 0x1ff3a539482 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a538a80, buffer 0x1ff3a538c02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a538200, buffer 0x1ff3a538382 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a537980, buffer 0x1ff3a537b02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a537100, buffer 0x1ff3a537282 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a536880, buffer 0x1ff3a536a02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a536000, buffer 0x1ff3a536182 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a535780, buffer 0x1ff3a535902 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a534f00, buffer 0x1ff3a535082 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a534680, buffer 0x1ff3a534802 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a533e00, buffer 0x1ff3a533f82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a533580, buffer 0x1ff3a533702 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a532d00, buffer 0x1ff3a532e82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a532480, buffer 0x1ff3a532602 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a531c00, buffer 0x1ff3a531d82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a531380, buffer 0x1ff3a531502 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a530b00, buffer 0x1ff3a530c82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a530280, buffer 0x1ff3a530402 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52fa00, buffer 0x1ff3a52fb82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52f180, buffer 0x1ff3a52f302 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52e900, buffer 0x1ff3a52ea82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52e080, buffer 0x1ff3a52e202 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52d800, buffer 0x1ff3a52d982 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52cf80, buffer 0x1ff3a52d102 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52c700, buffer 0x1ff3a52c882 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52be80, buffer 0x1ff3a52c002 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52b600, buffer 0x1ff3a52b782 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52ad80, buffer 0x1ff3a52af02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a52a500, buffer 0x1ff3a52a682 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a529c80, buffer 0x1ff3a529e02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a529400, buffer 0x1ff3a529582 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a528b80, buffer 0x1ff3a528d02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a528300, buffer 0x1ff3a528482 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a527a80, buffer 0x1ff3a527c02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a527200, buffer 0x1ff3a527382 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a526980, buffer 0x1ff3a526b02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a526100, buffer 0x1ff3a526282 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a525880, buffer 0x1ff3a525a02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a525000, buffer 0x1ff3a525182 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a524780, buffer 0x1ff3a524902 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a523f00, buffer 0x1ff3a524082 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a523680, buffer 0x1ff3a523802 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a522e00, buffer 0x1ff3a522f82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a522580, buffer 0x1ff3a522702 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a521d00, buffer 0x1ff3a521e82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a521480, buffer 0x1ff3a521602 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a520c00, buffer 0x1ff3a520d82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a520380, buffer 0x1ff3a520502 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51fb00, buffer 0x1ff3a51fc82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51f280, buffer 0x1ff3a51f402 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51ea00, buffer 0x1ff3a51eb82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51e180, buffer 0x1ff3a51e302 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51d900, buffer 0x1ff3a51da82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51d080, buffer 0x1ff3a51d202 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51c800, buffer 0x1ff3a51c982 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51bf80, buffer 0x1ff3a51c102 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51b700, buffer 0x1ff3a51b882 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51ae80, buffer 0x1ff3a51b002 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a51a600, buffer 0x1ff3a51a782 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a519d80, buffer 0x1ff3a519f02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a519500, buffer 0x1ff3a519682 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a518c80, buffer 0x1ff3a518e02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a518400, buffer 0x1ff3a518582 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a517b80, buffer 0x1ff3a517d02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a517300, buffer 0x1ff3a517482 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a516a80, buffer 0x1ff3a516c02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a516200, buffer 0x1ff3a516382 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a515980, buffer 0x1ff3a515b02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a515100, buffer 0x1ff3a515282 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a514880, buffer 0x1ff3a514a02 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a514000, buffer 0x1ff3a514182 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a513780, buffer 0x1ff3a513902 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a512f00, buffer 0x1ff3a513082 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a512680, buffer 0x1ff3a512802 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a511e00, buffer 0x1ff3a511f82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a511580, buffer 0x1ff3a511702 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a510d00, buffer 0x1ff3a510e82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a510480, buffer 0x1ff3a510602 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50fc00, buffer 0x1ff3a50fd82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50f380, buffer 0x1ff3a50f502 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50eb00, buffer 0x1ff3a50ec82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50e280, buffer 0x1ff3a50e402 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50da00, buffer 0x1ff3a50db82 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50d180, buffer 0x1ff3a50d302 into stack 2 PMD: xgbe1: Pushed mbuf 0x1ff3a50c900, buffer 0x1ff3a50ca82 into stack 2 PMD: xgbe1: Filled 128/128 buffers PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported PMD: rte_eth_allmulticast_disable: Function not supported _eth_dev_init: start port 0 success. _eth_dev_init: enable port 0 promiscuous. main: Link Up - speed 10000 Mbps - full-duplex _tx_pkts_rand_init: Alloc 32 mbuf for port=0 _tx_pkts_rand_init: Prebuild 32 mbuf for port=0 _tx_pkts_rand_init: Prebuild 32 mbuf for port=0 done. main: launch lcore 1 _mbuf_random_task task port=0 txq=0 _mbuf_random_task: Start mbuf rand task port=0 pool=0x0x1ff36e3f5c0 _mbuf_random_task: Start mbuf rand task daddr=192.168.1.245 dport=80 _mbuf_random_task: Core 1 Exit.. _tx_rand_task: Start TX rand task port=0 txq=0 pkts_burst=32 _wait_for_dev_link_up: TX rand task Core 2 port 0 Link is Up PMD: Trying to transmit 32 packets on xgbe1:0. main: launch lcore 2 tx task port=0 txq=0 PMD: xgbe1:0: Sending packet 0x1ff3a50c200, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a50b980, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a50b100, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a50a880, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a50a000, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a509780, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a508f00, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a508680, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a507e00, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a507580, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a506d00, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a506480, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a505c00, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a505380, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a504b00, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a504280, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a503a00, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a503180, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a502900, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a502080, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a501800, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a500f80, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a500700, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4ffe80, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4ff600, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fed80, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fe500, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fdc80, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fd400, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fcb80, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fc300, len 62 PMD: xgbe1:0: Sending packet 0x1ff3a4fba80, len 62 PMD: Ask the mPIPE hardware to egress outstanding packets immediately. PMD: Wait for mPIPE equeue slot 32 complete. Regards. Arthas ------------------ Original ------------------From: "Arthas";<kangzy1982@qq.com>; Date: Thu, Sep 24, 2015 01:38 PM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Zhigang, I checked error code and got a error information "(No more IOTLB entries)." & xmit function gxio_mpipe_equeue_try_reserve_fast got "Insufficient DMA credits"! Command: run ./testpmd -c 0xffffffff -m 6144 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init instance 0 gxio_mpipe_init instance 1 EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0x80000000 bytes EAL: Virtual area found at 0x1ff68000000 (size = 0x80000000) EAL: Ask a virtual area of 0xc000000 bytes EAL: Virtual area found at 0x1ff5b000000 (size = 0xc000000) EAL: Ask a virtual area of 0xf4000000 bytes EAL: Virtual area found at 0x1fe66000000 (size = 0xf4000000) EAL: Requesting 384 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7f94690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eaf3f060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea73f060;cpuset=[2]) EAL: lcore 3 is ready (tid=e9f3f060;cpuset=[3]) EAL: lcore 4 is ready (tid=e973f060;cpuset=[4]) EAL: lcore 5 is ready (tid=e8f3f060;cpuset=[5]) EAL: lcore 6 is ready (tid=67fff060;cpuset=[6]) EAL: lcore 7 is ready (tid=677ff060;cpuset=[7]) EAL: lcore 8 is ready (tid=5afff060;cpuset=[8]) EAL: lcore 9 is ready (tid=5a7ff060;cpuset=[9]) EAL: lcore 10 is ready (tid=65fff060;cpuset=[10]) EAL: lcore 11 is ready (tid=657ff060;cpuset=[11]) EAL: lcore 12 is ready (tid=64fff060;cpuset=[12]) EAL: lcore 13 is ready (tid=647ff060;cpuset=[13]) EAL: lcore 14 is ready (tid=3ffff060;cpuset=[14]) EAL: lcore 15 is ready (tid=3f7ff060;cpuset=[15]) EAL: lcore 16 is ready (tid=3efff060;cpuset=[16]) EAL: lcore 17 is ready (tid=3e7ff060;cpuset=[17]) EAL: lcore 18 is ready (tid=3dfff060;cpuset=[18]) EAL: lcore 19 is ready (tid=3d7ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=3cfff060;cpuset=[20]) EAL: lcore 21 is ready (tid=3c7ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=1bfff060;cpuset=[22]) EAL: lcore 23 is ready (tid=1b7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=1afff060;cpuset=[24]) EAL: lcore 25 is ready (tid=1a7ff060;cpuset=[25]) EAL: lcore 26 is ready (tid=19fff060;cpuset=[26]) EAL: lcore 27 is ready (tid=197ff060;cpuset=[27]) EAL: lcore 28 is ready (tid=18fff060;cpuset=[28]) EAL: lcore 29 is ready (tid=187ff060;cpuset=[29]) EAL: lcore 30 is ready (tid=f7fff060;cpuset=[30]) EAL: lcore 31 is ready (tid=f77ff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Could not register memseg @0x1ff68000000, -1111(No more IOTLB entries). PMD: xgbe1: Could not register memseg @0x1ff5b000000, -1111(No more IOTLB entries). PMD: xgbe1: Could not register memseg @0x1fe66000000, -1111(No more IOTLB entries). PMD: xgbe1: Buffer stack memory 0x1ff63780000 - 0x1ff637d557f. PMD: xgbe1: eDMA ring memory 0x1ff637d8000 - 0x1ff637d9fff. PMD: xgbe1: iDMA ring 0 memory 0x1ff6377c000 - 0x1ff6377dfff. PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported PMD: rte_eth_allmulticast_disable: Function not supported Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit Command: run cat /proc/meminfo MemTotal: 8230464 kB MemFree: 1765120 kB Buffers: 0 kB Cached: 42432 kB SwapCached: 0 kB Active: 27776 kB Inactive: 8448 kB Active(anon): 27776 kB Inactive(anon): 8448 kB Active(file): 0 kB Inactive(file): 0 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 0 kB Mapped: 3008 kB Shmem: 17856 kB Slab: 17984 kB SReclaimable: 1280 kB SUnreclaim: 16704 kB KernelStack: 11456 kB PageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 969472 kB Committed_AS: 41280 kB VmallocTotal: 4194304 kB VmallocUsed: 224704 kB VmallocChunk: 3964864 kB Sequestered: 50816 kB HugePages_Total: 384 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 16384 kB ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Thu, Sep 24, 2015 11:47 AM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Zhigang I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not work and exit. Command: run cat /proc/meminfo MemTotal: 8230464 kB MemFree: 3872576 kB Buffers: 0 kB Cached: 12480 kB SwapCached: 0 kB Active: 11200 kB Inactive: 5888 kB Active(anon): 11200 kB Inactive(anon): 5888 kB Active(file): 0 kB Inactive(file): 0 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 4736 kB Mapped: 3072 kB Shmem: 12480 kB Slab: 16256 kB SReclaimable: 768 kB SUnreclaim: 15488 kB KernelStack: 11648 kB PageTables: 4096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2018048 kB Committed_AS: 19328 kB VmallocTotal: 4194304 kB VmallocUsed: 224704 kB VmallocChunk: 3964864 kB Sequestered: 37184 kB HugePages_Total: 256 HugePages_Free: 256 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 16384 kB Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init instance 0 gxio_mpipe_init instance 1 EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0xc000000 bytes EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000) EAL: Ask a virtual area of 0xf4000000 bytes EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000) EAL: Requesting 128 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2]) EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3]) EAL: lcore 4 is ready (tid=e97af060;cpuset=[4]) EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5]) EAL: lcore 6 is ready (tid=e87af060;cpuset=[6]) EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7]) EAL: lcore 8 is ready (tid=dafff060;cpuset=[8]) EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9]) EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10]) EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11]) EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12]) EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14]) EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13]) EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15]) EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16]) EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17]) EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18]) EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20]) EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22]) EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=8efff060;cpuset=[24]) EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25]) EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26]) EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27]) EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28]) EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29]) EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30]) EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f. PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff. PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff. Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Thu, Sep 24, 2015 09:47 AM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas Seems like something wrong with memseg, could you try with " --hvx hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve hugepages for DPDK, and check there are still such errors. With regard to MDE-4.3.3, please contact your local tech support. Thanks -Zhigang >-----Original Message----- >From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >Sent: Wednesday, September 23, 2015 11:56 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, ZhiGang, > Can you tell me where can download TileraMDE-4.3.3 package? My tilegx >tech supporter only send me TileraMDE-4.2.4 version! >:) > >Thanks, > Arthas > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:41 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > I checked source code and debug it , found dpdk function rte_eth_tx_burst >with tilegx return 0 and no other error. Can I contact you directly? >Regards, > Arthas > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:35 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir >/tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >and testpmd start parameter is >tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 >--forward-mode=txonly -a --port-topology=chained -+- > > but xgbe1 can't xmit any packet. >This is my run log: > >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: No free hugepages reported in hugepages-1024kB >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x16000000 bytes >EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >EAL: Ask a virtual area of 0x90000000 bytes >EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >EAL: Ask a virtual area of 0x10000000 bytes >EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >EAL: Ask a virtual area of 0x46000000 bytes >EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) >Set txonly packet forwarding mode >Auto-start selected >Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex >Done >No commandline core given, start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >and another tilegx card output: >Command: run mpipe-stat xgbe1 >Link Tx pkt Tx bits Rx pkt Rx bits Tx err >Rx err >--------------------------------------------------------------------------- ----- >xgbe1 0 0 0 0 >0 0 > > > >Regards, Arthas > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Wed, Sep 23, 2015 03:34 PM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? > >>-----Original Message----- >>From: Arthas [mailto:kangzy1982@qq.com] >>Sent: Wednesday, September 23, 2015 1:21 PM >>To: dev >>Cc: zlu >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>and I wrote a sample RX example, got an other information. >> >> >>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >> >> >> >> Regards, Arthas >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 01:17 PM >>To: "dev"<dev@dpdk.org>; >>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for >tilegx. >>But I got a error with rte_mbuf rte_pktmbuf_append. >> >>PANIC in rte_mbuf_sanity_check(): >>bad phys addr >>7: [/trafgen(_start+0x70) [0x100b308]] >>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>5: [/trafgen(main+0x2148) [0x1017b78]] >>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >> >> >>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >> >> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-25 4:37 ` Arthas @ 2015-09-25 14:44 ` Tony Lu 2015-09-26 14:48 ` Arthas 0 siblings, 1 reply; 13+ messages in thread From: Tony Lu @ 2015-09-25 14:44 UTC (permalink / raw) To: 'Arthas', 'dev' Hi, Arthas I don't see the failed messages in your log, so that can't give you useful guidance. Are you running testpmd or your own apps? Can you generate some packets on another GX, and check if the dpdk can receive packets with testpmd. Overall, I recommend you to run our latest MDE, as that's we usually runs with DPDK, so that we can reproduce you case. Thanks -Zhigang >-----Original Message----- >From: Arthas [mailto:kangzy1982@qq.com] >Sent: Friday, September 25, 2015 12:38 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, Zhigang, > I fixed register memseg error, but gxio_mpipe_equeue_put_at send packet >still failed. >Command: run cat /proc/meminfo >MemTotal: 8230016 kB >MemFree: 3866688 kB >Buffers: 0 kB >Cached: 16576 kB >SwapCached: 0 kB >Active: 11392 kB >Inactive: 9088 kB >Active(anon): 11392 kB >Inactive(anon): 9088 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 0 kB >Mapped: 3072 kB >Shmem: 16320 kB >Slab: 17024 kB >SReclaimable: 768 kB >SUnreclaim: 16256 kB >KernelStack: 11456 kB >PageTables: 0 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 2017856 kB >Committed_AS: 22976 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 46144 kB >HugePages_Total: 4 >HugePages_Free: 0 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 1048576 kB > >_init_dpdk_eal_params: -c 0xffffffff -m 4096 -r 1 -n 1 --log-level 8 --vdev xgbe1 >--vdev xgbe2 --log-level 8 --no-hpet >main: rte_eal_init. >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x100000000 bytes >EAL: Virtual area found at 0x1fe40000000 (size = 0x100000000) >EAL: Requesting 4 pages of size 1024MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f34690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >PMD: mpipe init xgbe2 >PMD: xgbe2: Initialized mpipe device(mac ee:d1:53:72:82:5b). >EAL: lcore 1 is ready (tid=eb1df060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea9df060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea1df060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e99df060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e91df060;cpuset=[5]) >EAL: lcore 6 is ready (tid=e89df060;cpuset=[6]) >EAL: lcore 7 is ready (tid=dbfff060;cpuset=[7]) >EAL: lcore 8 is ready (tid=db7ff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=dafff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=da7ff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=d9fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=d97ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=d8fff060;cpuset=[13]) >EAL: lcore 15 is ready (tid=bbfff060;cpuset=[15]) >EAL: lcore 14 is ready (tid=d87ff060;cpuset=[14]) >EAL: lcore 16 is ready (tid=bb7ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=bafff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=ba7ff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b9fff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=b97ff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=b8fff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=b87ff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=93fff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=937ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=92fff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=927ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=91fff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=917ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=90fff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=907ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=73fff060;cpuset=[31]) >main: Detect CPU freq 1200000000 >main: Detect 32 CPU cores >main: Probe PCI ethernet devices. >main: Detect 2 Ethernet device >main: pid=2169 >_eth_dev_init: Init port 0 mbuf pool pkt_len=1986 nr_pkts=17536 cache=512 >_eth_dev_init: Init port 0 mbuf pool pkt_len=1730 nr_pkts=17536 cache=512 >pool=0x0x1ff36e3f5c0 success. >_eth_dev_init: Configure port 0 nr_tx=1 nr_rx=1 >_eth_dev_init: Configure port 0 rxq=0 rxd=128 >PMD: Allocate 128 iqueue descs. >PMD: Init mPIPE buffer stack size index 3 >_eth_dev_init: port 0: EE:D1:53:72:82:5A >_eth_dev_init: Configure port 0 txq=0 txd=1024 >PMD: Allocate one NotifRing for each queue. max=16 >PMD: Allocate a NotifGroup. >PMD: Allocate 256 buckets. >PMD: Allocate 1 mPIPE buffer stack. >PMD: gxio_mpipe_register_page . >PMD: Register mPIPE page 0x1fe40000000 size=1073741824, log2=30 must < >40 & > 12 >PMD: Register mPIPE page 0x1fe80000000 size=1073741824, log2=30 must < >40 & > 12 >PMD: Register mPIPE page 0x1fec0000000 size=1073741824, log2=30 must < 40 >& > 12 >PMD: Register mPIPE page 0x1ff00000000 size=1073741824, log2=30 must < 40 >& > 12 >PMD: xgbe1: Registered segment 0x1fe40000000 - 0x1ff3fffffff >PMD: Allocate mPIPE buffer stack size=65536 341K bytes.. >PMD: xgbe1: Buffer stack memory 0x1ff36de0000 - 0x1ff36e3557f. >PMD: xgbe1: eDMA ring memory 0x1ff36e3c000 - 0x1ff36e3dfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ff36e38000 - 0x1ff36e39fff. >PMD: xgbe1: Pushed mbuf 0x1ff3a550080, buffer 0x1ff3a550202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54f800, buffer 0x1ff3a54f982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54ef80, buffer 0x1ff3a54f102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54e700, buffer 0x1ff3a54e882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54de80, buffer 0x1ff3a54e002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54d600, buffer 0x1ff3a54d782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54cd80, buffer 0x1ff3a54cf02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54c500, buffer 0x1ff3a54c682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54bc80, buffer 0x1ff3a54be02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54b400, buffer 0x1ff3a54b582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54ab80, buffer 0x1ff3a54ad02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54a300, buffer 0x1ff3a54a482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a549a80, buffer 0x1ff3a549c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a549200, buffer 0x1ff3a549382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a548980, buffer 0x1ff3a548b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a548100, buffer 0x1ff3a548282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a547880, buffer 0x1ff3a547a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a547000, buffer 0x1ff3a547182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a546780, buffer 0x1ff3a546902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a545f00, buffer 0x1ff3a546082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a545680, buffer 0x1ff3a545802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a544e00, buffer 0x1ff3a544f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a544580, buffer 0x1ff3a544702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a543d00, buffer 0x1ff3a543e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a543480, buffer 0x1ff3a543602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a542c00, buffer 0x1ff3a542d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a542380, buffer 0x1ff3a542502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a541b00, buffer 0x1ff3a541c82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a541280, buffer 0x1ff3a541402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a540a00, buffer 0x1ff3a540b82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a540180, buffer 0x1ff3a540302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53f900, buffer 0x1ff3a53fa82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53f080, buffer 0x1ff3a53f202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53e800, buffer 0x1ff3a53e982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53df80, buffer 0x1ff3a53e102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53d700, buffer 0x1ff3a53d882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53ce80, buffer 0x1ff3a53d002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53c600, buffer 0x1ff3a53c782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53bd80, buffer 0x1ff3a53bf02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53b500, buffer 0x1ff3a53b682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53ac80, buffer 0x1ff3a53ae02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53a400, buffer 0x1ff3a53a582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a539b80, buffer 0x1ff3a539d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a539300, buffer 0x1ff3a539482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a538a80, buffer 0x1ff3a538c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a538200, buffer 0x1ff3a538382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a537980, buffer 0x1ff3a537b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a537100, buffer 0x1ff3a537282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a536880, buffer 0x1ff3a536a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a536000, buffer 0x1ff3a536182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a535780, buffer 0x1ff3a535902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a534f00, buffer 0x1ff3a535082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a534680, buffer 0x1ff3a534802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a533e00, buffer 0x1ff3a533f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a533580, buffer 0x1ff3a533702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a532d00, buffer 0x1ff3a532e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a532480, buffer 0x1ff3a532602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a531c00, buffer 0x1ff3a531d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a531380, buffer 0x1ff3a531502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a530b00, buffer 0x1ff3a530c82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a530280, buffer 0x1ff3a530402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52fa00, buffer 0x1ff3a52fb82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52f180, buffer 0x1ff3a52f302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52e900, buffer 0x1ff3a52ea82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52e080, buffer 0x1ff3a52e202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52d800, buffer 0x1ff3a52d982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52cf80, buffer 0x1ff3a52d102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52c700, buffer 0x1ff3a52c882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52be80, buffer 0x1ff3a52c002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52b600, buffer 0x1ff3a52b782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52ad80, buffer 0x1ff3a52af02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52a500, buffer 0x1ff3a52a682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a529c80, buffer 0x1ff3a529e02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a529400, buffer 0x1ff3a529582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a528b80, buffer 0x1ff3a528d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a528300, buffer 0x1ff3a528482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a527a80, buffer 0x1ff3a527c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a527200, buffer 0x1ff3a527382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a526980, buffer 0x1ff3a526b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a526100, buffer 0x1ff3a526282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a525880, buffer 0x1ff3a525a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a525000, buffer 0x1ff3a525182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a524780, buffer 0x1ff3a524902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a523f00, buffer 0x1ff3a524082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a523680, buffer 0x1ff3a523802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a522e00, buffer 0x1ff3a522f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a522580, buffer 0x1ff3a522702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a521d00, buffer 0x1ff3a521e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a521480, buffer 0x1ff3a521602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a520c00, buffer 0x1ff3a520d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a520380, buffer 0x1ff3a520502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51fb00, buffer 0x1ff3a51fc82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51f280, buffer 0x1ff3a51f402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51ea00, buffer 0x1ff3a51eb82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51e180, buffer 0x1ff3a51e302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51d900, buffer 0x1ff3a51da82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51d080, buffer 0x1ff3a51d202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51c800, buffer 0x1ff3a51c982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51bf80, buffer 0x1ff3a51c102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51b700, buffer 0x1ff3a51b882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51ae80, buffer 0x1ff3a51b002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51a600, buffer 0x1ff3a51a782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a519d80, buffer 0x1ff3a519f02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a519500, buffer 0x1ff3a519682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a518c80, buffer 0x1ff3a518e02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a518400, buffer 0x1ff3a518582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a517b80, buffer 0x1ff3a517d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a517300, buffer 0x1ff3a517482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a516a80, buffer 0x1ff3a516c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a516200, buffer 0x1ff3a516382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a515980, buffer 0x1ff3a515b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a515100, buffer 0x1ff3a515282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a514880, buffer 0x1ff3a514a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a514000, buffer 0x1ff3a514182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a513780, buffer 0x1ff3a513902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a512f00, buffer 0x1ff3a513082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a512680, buffer 0x1ff3a512802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a511e00, buffer 0x1ff3a511f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a511580, buffer 0x1ff3a511702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a510d00, buffer 0x1ff3a510e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a510480, buffer 0x1ff3a510602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50fc00, buffer 0x1ff3a50fd82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50f380, buffer 0x1ff3a50f502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50eb00, buffer 0x1ff3a50ec82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50e280, buffer 0x1ff3a50e402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50da00, buffer 0x1ff3a50db82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50d180, buffer 0x1ff3a50d302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50c900, buffer 0x1ff3a50ca82 into stack 2 >PMD: xgbe1: Filled 128/128 buffers >PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported >PMD: rte_eth_allmulticast_disable: Function not supported >_eth_dev_init: start port 0 success. >_eth_dev_init: enable port 0 promiscuous. >main: Link Up - speed 10000 Mbps - full-duplex >_tx_pkts_rand_init: Alloc 32 mbuf for port=0 >_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 >_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 done. >main: launch lcore 1 _mbuf_random_task task port=0 txq=0 >_mbuf_random_task: Start mbuf rand task port=0 pool=0x0x1ff36e3f5c0 >_mbuf_random_task: Start mbuf rand task daddr=192.168.1.245 dport=80 >_mbuf_random_task: Core 1 Exit.. >_tx_rand_task: Start TX rand task port=0 txq=0 pkts_burst=32 >_wait_for_dev_link_up: TX rand task Core 2 port 0 Link is Up >PMD: Trying to transmit 32 packets on xgbe1:0. >main: launch lcore 2 tx task port=0 txq=0 >PMD: xgbe1:0: Sending packet 0x1ff3a50c200, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50b980, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50b100, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50a880, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50a000, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a509780, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a508f00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a508680, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a507e00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a507580, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a506d00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a506480, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a505c00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a505380, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a504b00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a504280, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a503a00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a503180, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a502900, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a502080, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a501800, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a500f80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a500700, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4ffe80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4ff600, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fed80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fe500, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fdc80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fd400, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fcb80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fc300, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fba80, len 62 >PMD: Ask the mPIPE hardware to egress outstanding packets immediately. >PMD: Wait for mPIPE equeue slot 32 complete. > >Regards. > Arthas >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Thu, Sep 24, 2015 01:38 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, Zhigang, > I checked error code and got a error information "(No more IOTLB entries)." & >xmit function gxio_mpipe_equeue_try_reserve_fast got "Insufficient DMA >credits"! > >Command: run ./testpmd -c 0xffffffff -m 6144 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 --forward-mode=txonly -a --port-topology=chained >gxio_mpipe_init instance 0 >gxio_mpipe_init instance 1 >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x80000000 bytes >EAL: Virtual area found at 0x1ff68000000 (size = 0x80000000) >EAL: Ask a virtual area of 0xc000000 bytes >EAL: Virtual area found at 0x1ff5b000000 (size = 0xc000000) >EAL: Ask a virtual area of 0xf4000000 bytes >EAL: Virtual area found at 0x1fe66000000 (size = 0xf4000000) >EAL: Requesting 384 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f94690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eaf3f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea73f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=e9f3f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e973f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e8f3f060;cpuset=[5]) >EAL: lcore 6 is ready (tid=67fff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=677ff060;cpuset=[7]) >EAL: lcore 8 is ready (tid=5afff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=5a7ff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=65fff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=657ff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=64fff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=647ff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=3ffff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=3f7ff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=3efff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=3e7ff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=3dfff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=3d7ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=3cfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=3c7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=1bfff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=1b7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=1afff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=1a7ff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=19fff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=197ff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=18fff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=187ff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=f7fff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f77ff060;cpuset=[31]) Set txonly packet forwarding >mode Auto-start selected Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ff68000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Could not register memseg @0x1ff5b000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Could not register memseg @0x1fe66000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Buffer stack memory 0x1ff63780000 - 0x1ff637d557f. >PMD: xgbe1: eDMA ring memory 0x1ff637d8000 - 0x1ff637d9fff. >PMD: xgbe1: iDMA ring 0 memory 0x1ff6377c000 - 0x1ff6377dfff. >PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported >PMD: rte_eth_allmulticast_disable: Function not supported Port 0: >EE:D1:53:72:82:5A Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, >start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit >Command: run cat /proc/meminfo >MemTotal: 8230464 kB >MemFree: 1765120 kB >Buffers: 0 kB >Cached: 42432 kB >SwapCached: 0 kB >Active: 27776 kB >Inactive: 8448 kB >Active(anon): 27776 kB >Inactive(anon): 8448 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 0 kB >Mapped: 3008 kB >Shmem: 17856 kB >Slab: 17984 kB >SReclaimable: 1280 kB >SUnreclaim: 16704 kB >KernelStack: 11456 kB >PageTables: 0 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 969472 kB >Committed_AS: 41280 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 50816 kB >HugePages_Total: 384 >HugePages_Free: 0 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 16384 kB > > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Thu, Sep 24, 2015 11:47 AM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Zhigang > I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not >work and exit. >Command: run cat /proc/meminfo >MemTotal: 8230464 kB >MemFree: 3872576 kB >Buffers: 0 kB >Cached: 12480 kB >SwapCached: 0 kB >Active: 11200 kB >Inactive: 5888 kB >Active(anon): 11200 kB >Inactive(anon): 5888 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 4736 kB >Mapped: 3072 kB >Shmem: 12480 kB >Slab: 16256 kB >SReclaimable: 768 kB >SUnreclaim: 15488 kB >KernelStack: 11648 kB >PageTables: 4096 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 2018048 kB >Committed_AS: 19328 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 37184 kB >HugePages_Total: 256 >HugePages_Free: 256 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 16384 kB > >Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init >instance 0 gxio_mpipe_init instance 1 >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0xc000000 bytes >EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000) >EAL: Ask a virtual area of 0xf4000000 bytes >EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2]) >EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e97af060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5]) >EAL: lcore 6 is ready (tid=e87af060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7]) >EAL: lcore 8 is ready (tid=dafff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12]) >EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14]) >EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13]) >EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=8efff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31]) Set txonly packet forwarding >mode Auto-start selected Configuring Port 0 (socket 0) >PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f. >PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, >start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >Regards, > Arthas > > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Thu, Sep 24, 2015 09:47 AM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Seems like something wrong with memseg, could you try with " --hvx >hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve >hugepages for DPDK, and check there are still such errors. > >With regard to MDE-4.3.3, please contact your local tech support. > >Thanks >-Zhigang > >>-----Original Message----- >>From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >>Sent: Wednesday, September 23, 2015 11:56 PM >>To: zlu; dev >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, ZhiGang, >> Can you tell me where can download TileraMDE-4.3.3 package? My >>tilegx tech supporter only send me TileraMDE-4.2.4 version! >>:) >> >>Thanks, >> Arthas >> >> >> >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 06:41 PM >>To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >> >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, ZhiGang >> I checked source code and debug it , found dpdk function >>rte_eth_tx_burst with tilegx return 0 and no other error. Can I contact you >directly? >>Regards, >> Arthas >> >> >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 06:35 PM >>To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >> >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, ZhiGang >> My tilegx boot parameter is "tile-monitor --dev gxpci${1} >>--hv-bin-dir /tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >>and testpmd start parameter is >>tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >>-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 >>--forward-mode=txonly -a --port-topology=chained -+- >> >> but xgbe1 can't xmit any packet. >>This is my run log: >> >>EAL: Detected lcore 0 as core 0 on socket 0 >>EAL: Detected lcore 1 as core 1 on socket 0 >>EAL: Detected lcore 2 as core 2 on socket 0 >>EAL: Detected lcore 3 as core 3 on socket 0 >>EAL: Detected lcore 4 as core 4 on socket 0 >>EAL: Detected lcore 5 as core 5 on socket 0 >>EAL: Detected lcore 6 as core 6 on socket 0 >>EAL: Detected lcore 7 as core 7 on socket 0 >>EAL: Detected lcore 8 as core 8 on socket 0 >>EAL: Detected lcore 9 as core 9 on socket 0 >>EAL: Detected lcore 10 as core 10 on socket 0 >>EAL: Detected lcore 11 as core 11 on socket 0 >>EAL: Detected lcore 12 as core 12 on socket 0 >>EAL: Detected lcore 13 as core 13 on socket 0 >>EAL: Detected lcore 14 as core 14 on socket 0 >>EAL: Detected lcore 15 as core 15 on socket 0 >>EAL: Detected lcore 16 as core 16 on socket 0 >>EAL: Detected lcore 17 as core 17 on socket 0 >>EAL: Detected lcore 18 as core 18 on socket 0 >>EAL: Detected lcore 19 as core 19 on socket 0 >>EAL: Detected lcore 20 as core 20 on socket 0 >>EAL: Detected lcore 21 as core 21 on socket 0 >>EAL: Detected lcore 22 as core 22 on socket 0 >>EAL: Detected lcore 23 as core 23 on socket 0 >>EAL: Detected lcore 24 as core 24 on socket 0 >>EAL: Detected lcore 25 as core 25 on socket 0 >>EAL: Detected lcore 26 as core 26 on socket 0 >>EAL: Detected lcore 27 as core 27 on socket 0 >>EAL: Detected lcore 28 as core 28 on socket 0 >>EAL: Detected lcore 29 as core 29 on socket 0 >>EAL: Detected lcore 30 as core 30 on socket 0 >>EAL: Detected lcore 31 as core 31 on socket 0 >>EAL: Detected lcore 32 as core 32 on socket 0 >>EAL: Detected lcore 33 as core 33 on socket 0 >>EAL: Detected lcore 34 as core 34 on socket 0 >>EAL: Detected lcore 35 as core 35 on socket 0 >>EAL: Support maximum 36 logical core(s) by configuration. >>EAL: Detected 36 lcore(s) >>EAL: No free hugepages reported in hugepages-1024kB >>EAL: Setting up physically contiguous memory... >>EAL: Ask a virtual area of 0x16000000 bytes >>EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >>EAL: Ask a virtual area of 0x90000000 bytes >>EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >>EAL: Ask a virtual area of 0x2000000 bytes >>EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >>EAL: Ask a virtual area of 0x10000000 bytes >>EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >>EAL: Ask a virtual area of 0x46000000 bytes >>EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >>EAL: Ask a virtual area of 0x2000000 bytes >>EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >>EAL: Requesting 128 pages of size 16MB from socket 0 >>EAL: TSC frequency is ~1199999 KHz >>EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using >>unreliable clock cycles ! >>EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >>PMD: mpipe init xgbe1 >>PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >>EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >>EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >>EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >>EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >>EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >>EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >>EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >>EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >>EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >>EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >>EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >>EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >>EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >>EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >>EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >>EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >>EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >>EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >>EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >>EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >>EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >>EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >>EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >>EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >>EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >>EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >>EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >>EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >>EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >>EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >>EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) Set txonly packet >>forwarding mode Auto-start selected Configuring Port 0 (socket 0) >>PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >>PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >>PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >>Port 0: EE:D1:53:72:82:5A >>Checking link statuses... >>Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline >>core given, start packet forwarding >> txonly packet forwarding - CRC stripping disabled - packets/burst=32 >> packet len=64 - nb packet segments=1 >> nb forwarding cores=1 - nb forwarding ports=1 >> RX queues=1 - RX desc=128 - RX free threshold=0 >> RX threshold registers: pthresh=0 hthresh=0 wthresh=0 >> TX queues=2 - TX desc=512 - TX free threshold=0 >> TX threshold registers: pthresh=0 hthresh=0 wthresh=0 >> TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit >> >> >>and another tilegx card output: >>Command: run mpipe-stat xgbe1 >>Link Tx pkt Tx bits Rx pkt Rx bits Tx err >>Rx err >>----------------------------------------------------------------------- >>---- >----- >>xgbe1 0 0 0 0 >>0 0 >> >> >> >>Regards, Arthas >> >> >>------------------ Original ------------------ >>From: "zlu";<zlu@ezchip.com>; >>Date: Wed, Sep 23, 2015 03:34 PM >>To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; >> >>Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, Arthas >> >>Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? >> >>>-----Original Message----- >>>From: Arthas [mailto:kangzy1982@qq.com] >>>Sent: Wednesday, September 23, 2015 1:21 PM >>>To: dev >>>Cc: zlu >>>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >>> >>>and I wrote a sample RX example, got an other information. >>> >>> >>>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >>> >>> >>> >>> Regards, Arthas >>> >>>------------------ Original ------------------ >>>From: "Arthas";<kangzy1982@qq.com>; >>>Date: Wed, Sep 23, 2015 01:17 PM >>>To: "dev"<dev@dpdk.org>; >>>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >>> >>>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen >>>for >>tilegx. >>>But I got a error with rte_mbuf rte_pktmbuf_append. >>> >>>PANIC in rte_mbuf_sanity_check(): >>>bad phys addr >>>7: [/trafgen(_start+0x70) [0x100b308]] >>>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>>5: [/trafgen(main+0x2148) [0x1017b78]] >>>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >>> >>> >>>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >>> >>> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-25 14:44 ` Tony Lu @ 2015-09-26 14:48 ` Arthas 2015-09-26 14:52 ` Arthas 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-26 14:48 UTC (permalink / raw) To: zlu, dev Hi, Zhigang, Thanks, I use mPIPE api can receive & send packets. but DPDK v2.1.0 with gx can't send & receive any packet. I guess hv layer dosn't see any memory pages and register change, so any edesc can't be reclaimed. Now I waiting for our tech supporter release MDE 4.3.3. Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Fri, Sep 25, 2015 10:44 PM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas I don't see the failed messages in your log, so that can't give you useful guidance. Are you running testpmd or your own apps? Can you generate some packets on another GX, and check if the dpdk can receive packets with testpmd. Overall, I recommend you to run our latest MDE, as that's we usually runs with DPDK, so that we can reproduce you case. Thanks -Zhigang >-----Original Message----- >From: Arthas [mailto:kangzy1982@qq.com] >Sent: Friday, September 25, 2015 12:38 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, Zhigang, > I fixed register memseg error, but gxio_mpipe_equeue_put_at send packet >still failed. >Command: run cat /proc/meminfo >MemTotal: 8230016 kB >MemFree: 3866688 kB >Buffers: 0 kB >Cached: 16576 kB >SwapCached: 0 kB >Active: 11392 kB >Inactive: 9088 kB >Active(anon): 11392 kB >Inactive(anon): 9088 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 0 kB >Mapped: 3072 kB >Shmem: 16320 kB >Slab: 17024 kB >SReclaimable: 768 kB >SUnreclaim: 16256 kB >KernelStack: 11456 kB >PageTables: 0 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 2017856 kB >Committed_AS: 22976 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 46144 kB >HugePages_Total: 4 >HugePages_Free: 0 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 1048576 kB > >_init_dpdk_eal_params: -c 0xffffffff -m 4096 -r 1 -n 1 --log-level 8 --vdev xgbe1 >--vdev xgbe2 --log-level 8 --no-hpet >main: rte_eal_init. >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x100000000 bytes >EAL: Virtual area found at 0x1fe40000000 (size = 0x100000000) >EAL: Requesting 4 pages of size 1024MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f34690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >PMD: mpipe init xgbe2 >PMD: xgbe2: Initialized mpipe device(mac ee:d1:53:72:82:5b). >EAL: lcore 1 is ready (tid=eb1df060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea9df060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea1df060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e99df060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e91df060;cpuset=[5]) >EAL: lcore 6 is ready (tid=e89df060;cpuset=[6]) >EAL: lcore 7 is ready (tid=dbfff060;cpuset=[7]) >EAL: lcore 8 is ready (tid=db7ff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=dafff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=da7ff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=d9fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=d97ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=d8fff060;cpuset=[13]) >EAL: lcore 15 is ready (tid=bbfff060;cpuset=[15]) >EAL: lcore 14 is ready (tid=d87ff060;cpuset=[14]) >EAL: lcore 16 is ready (tid=bb7ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=bafff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=ba7ff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b9fff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=b97ff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=b8fff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=b87ff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=93fff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=937ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=92fff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=927ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=91fff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=917ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=90fff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=907ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=73fff060;cpuset=[31]) >main: Detect CPU freq 1200000000 >main: Detect 32 CPU cores >main: Probe PCI ethernet devices. >main: Detect 2 Ethernet device >main: pid=2169 >_eth_dev_init: Init port 0 mbuf pool pkt_len=1986 nr_pkts=17536 cache=512 >_eth_dev_init: Init port 0 mbuf pool pkt_len=1730 nr_pkts=17536 cache=512 >pool=0x0x1ff36e3f5c0 success. >_eth_dev_init: Configure port 0 nr_tx=1 nr_rx=1 >_eth_dev_init: Configure port 0 rxq=0 rxd=128 >PMD: Allocate 128 iqueue descs. >PMD: Init mPIPE buffer stack size index 3 >_eth_dev_init: port 0: EE:D1:53:72:82:5A >_eth_dev_init: Configure port 0 txq=0 txd=1024 >PMD: Allocate one NotifRing for each queue. max=16 >PMD: Allocate a NotifGroup. >PMD: Allocate 256 buckets. >PMD: Allocate 1 mPIPE buffer stack. >PMD: gxio_mpipe_register_page . >PMD: Register mPIPE page 0x1fe40000000 size=1073741824, log2=30 must < >40 & > 12 >PMD: Register mPIPE page 0x1fe80000000 size=1073741824, log2=30 must < >40 & > 12 >PMD: Register mPIPE page 0x1fec0000000 size=1073741824, log2=30 must < 40 >& > 12 >PMD: Register mPIPE page 0x1ff00000000 size=1073741824, log2=30 must < 40 >& > 12 >PMD: xgbe1: Registered segment 0x1fe40000000 - 0x1ff3fffffff >PMD: Allocate mPIPE buffer stack size=65536 341K bytes.. >PMD: xgbe1: Buffer stack memory 0x1ff36de0000 - 0x1ff36e3557f. >PMD: xgbe1: eDMA ring memory 0x1ff36e3c000 - 0x1ff36e3dfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ff36e38000 - 0x1ff36e39fff. >PMD: xgbe1: Pushed mbuf 0x1ff3a550080, buffer 0x1ff3a550202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54f800, buffer 0x1ff3a54f982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54ef80, buffer 0x1ff3a54f102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54e700, buffer 0x1ff3a54e882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54de80, buffer 0x1ff3a54e002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54d600, buffer 0x1ff3a54d782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54cd80, buffer 0x1ff3a54cf02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54c500, buffer 0x1ff3a54c682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54bc80, buffer 0x1ff3a54be02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54b400, buffer 0x1ff3a54b582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54ab80, buffer 0x1ff3a54ad02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54a300, buffer 0x1ff3a54a482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a549a80, buffer 0x1ff3a549c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a549200, buffer 0x1ff3a549382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a548980, buffer 0x1ff3a548b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a548100, buffer 0x1ff3a548282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a547880, buffer 0x1ff3a547a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a547000, buffer 0x1ff3a547182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a546780, buffer 0x1ff3a546902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a545f00, buffer 0x1ff3a546082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a545680, buffer 0x1ff3a545802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a544e00, buffer 0x1ff3a544f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a544580, buffer 0x1ff3a544702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a543d00, buffer 0x1ff3a543e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a543480, buffer 0x1ff3a543602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a542c00, buffer 0x1ff3a542d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a542380, buffer 0x1ff3a542502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a541b00, buffer 0x1ff3a541c82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a541280, buffer 0x1ff3a541402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a540a00, buffer 0x1ff3a540b82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a540180, buffer 0x1ff3a540302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53f900, buffer 0x1ff3a53fa82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53f080, buffer 0x1ff3a53f202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53e800, buffer 0x1ff3a53e982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53df80, buffer 0x1ff3a53e102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53d700, buffer 0x1ff3a53d882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53ce80, buffer 0x1ff3a53d002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53c600, buffer 0x1ff3a53c782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53bd80, buffer 0x1ff3a53bf02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53b500, buffer 0x1ff3a53b682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53ac80, buffer 0x1ff3a53ae02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53a400, buffer 0x1ff3a53a582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a539b80, buffer 0x1ff3a539d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a539300, buffer 0x1ff3a539482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a538a80, buffer 0x1ff3a538c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a538200, buffer 0x1ff3a538382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a537980, buffer 0x1ff3a537b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a537100, buffer 0x1ff3a537282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a536880, buffer 0x1ff3a536a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a536000, buffer 0x1ff3a536182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a535780, buffer 0x1ff3a535902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a534f00, buffer 0x1ff3a535082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a534680, buffer 0x1ff3a534802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a533e00, buffer 0x1ff3a533f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a533580, buffer 0x1ff3a533702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a532d00, buffer 0x1ff3a532e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a532480, buffer 0x1ff3a532602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a531c00, buffer 0x1ff3a531d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a531380, buffer 0x1ff3a531502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a530b00, buffer 0x1ff3a530c82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a530280, buffer 0x1ff3a530402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52fa00, buffer 0x1ff3a52fb82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52f180, buffer 0x1ff3a52f302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52e900, buffer 0x1ff3a52ea82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52e080, buffer 0x1ff3a52e202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52d800, buffer 0x1ff3a52d982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52cf80, buffer 0x1ff3a52d102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52c700, buffer 0x1ff3a52c882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52be80, buffer 0x1ff3a52c002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52b600, buffer 0x1ff3a52b782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52ad80, buffer 0x1ff3a52af02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52a500, buffer 0x1ff3a52a682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a529c80, buffer 0x1ff3a529e02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a529400, buffer 0x1ff3a529582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a528b80, buffer 0x1ff3a528d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a528300, buffer 0x1ff3a528482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a527a80, buffer 0x1ff3a527c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a527200, buffer 0x1ff3a527382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a526980, buffer 0x1ff3a526b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a526100, buffer 0x1ff3a526282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a525880, buffer 0x1ff3a525a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a525000, buffer 0x1ff3a525182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a524780, buffer 0x1ff3a524902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a523f00, buffer 0x1ff3a524082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a523680, buffer 0x1ff3a523802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a522e00, buffer 0x1ff3a522f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a522580, buffer 0x1ff3a522702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a521d00, buffer 0x1ff3a521e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a521480, buffer 0x1ff3a521602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a520c00, buffer 0x1ff3a520d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a520380, buffer 0x1ff3a520502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51fb00, buffer 0x1ff3a51fc82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51f280, buffer 0x1ff3a51f402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51ea00, buffer 0x1ff3a51eb82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51e180, buffer 0x1ff3a51e302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51d900, buffer 0x1ff3a51da82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51d080, buffer 0x1ff3a51d202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51c800, buffer 0x1ff3a51c982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51bf80, buffer 0x1ff3a51c102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51b700, buffer 0x1ff3a51b882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51ae80, buffer 0x1ff3a51b002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51a600, buffer 0x1ff3a51a782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a519d80, buffer 0x1ff3a519f02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a519500, buffer 0x1ff3a519682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a518c80, buffer 0x1ff3a518e02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a518400, buffer 0x1ff3a518582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a517b80, buffer 0x1ff3a517d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a517300, buffer 0x1ff3a517482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a516a80, buffer 0x1ff3a516c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a516200, buffer 0x1ff3a516382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a515980, buffer 0x1ff3a515b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a515100, buffer 0x1ff3a515282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a514880, buffer 0x1ff3a514a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a514000, buffer 0x1ff3a514182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a513780, buffer 0x1ff3a513902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a512f00, buffer 0x1ff3a513082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a512680, buffer 0x1ff3a512802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a511e00, buffer 0x1ff3a511f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a511580, buffer 0x1ff3a511702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a510d00, buffer 0x1ff3a510e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a510480, buffer 0x1ff3a510602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50fc00, buffer 0x1ff3a50fd82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50f380, buffer 0x1ff3a50f502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50eb00, buffer 0x1ff3a50ec82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50e280, buffer 0x1ff3a50e402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50da00, buffer 0x1ff3a50db82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50d180, buffer 0x1ff3a50d302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50c900, buffer 0x1ff3a50ca82 into stack 2 >PMD: xgbe1: Filled 128/128 buffers >PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported >PMD: rte_eth_allmulticast_disable: Function not supported >_eth_dev_init: start port 0 success. >_eth_dev_init: enable port 0 promiscuous. >main: Link Up - speed 10000 Mbps - full-duplex >_tx_pkts_rand_init: Alloc 32 mbuf for port=0 >_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 >_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 done. >main: launch lcore 1 _mbuf_random_task task port=0 txq=0 >_mbuf_random_task: Start mbuf rand task port=0 pool=0x0x1ff36e3f5c0 >_mbuf_random_task: Start mbuf rand task daddr=192.168.1.245 dport=80 >_mbuf_random_task: Core 1 Exit.. >_tx_rand_task: Start TX rand task port=0 txq=0 pkts_burst=32 >_wait_for_dev_link_up: TX rand task Core 2 port 0 Link is Up >PMD: Trying to transmit 32 packets on xgbe1:0. >main: launch lcore 2 tx task port=0 txq=0 >PMD: xgbe1:0: Sending packet 0x1ff3a50c200, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50b980, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50b100, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50a880, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50a000, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a509780, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a508f00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a508680, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a507e00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a507580, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a506d00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a506480, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a505c00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a505380, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a504b00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a504280, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a503a00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a503180, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a502900, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a502080, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a501800, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a500f80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a500700, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4ffe80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4ff600, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fed80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fe500, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fdc80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fd400, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fcb80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fc300, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fba80, len 62 >PMD: Ask the mPIPE hardware to egress outstanding packets immediately. >PMD: Wait for mPIPE equeue slot 32 complete. > >Regards. > Arthas >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Thu, Sep 24, 2015 01:38 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, Zhigang, > I checked error code and got a error information "(No more IOTLB entries)." & >xmit function gxio_mpipe_equeue_try_reserve_fast got "Insufficient DMA >credits"! > >Command: run ./testpmd -c 0xffffffff -m 6144 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 --forward-mode=txonly -a --port-topology=chained >gxio_mpipe_init instance 0 >gxio_mpipe_init instance 1 >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x80000000 bytes >EAL: Virtual area found at 0x1ff68000000 (size = 0x80000000) >EAL: Ask a virtual area of 0xc000000 bytes >EAL: Virtual area found at 0x1ff5b000000 (size = 0xc000000) >EAL: Ask a virtual area of 0xf4000000 bytes >EAL: Virtual area found at 0x1fe66000000 (size = 0xf4000000) >EAL: Requesting 384 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f94690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eaf3f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea73f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=e9f3f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e973f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e8f3f060;cpuset=[5]) >EAL: lcore 6 is ready (tid=67fff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=677ff060;cpuset=[7]) >EAL: lcore 8 is ready (tid=5afff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=5a7ff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=65fff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=657ff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=64fff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=647ff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=3ffff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=3f7ff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=3efff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=3e7ff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=3dfff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=3d7ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=3cfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=3c7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=1bfff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=1b7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=1afff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=1a7ff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=19fff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=197ff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=18fff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=187ff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=f7fff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f77ff060;cpuset=[31]) Set txonly packet forwarding >mode Auto-start selected Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ff68000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Could not register memseg @0x1ff5b000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Could not register memseg @0x1fe66000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Buffer stack memory 0x1ff63780000 - 0x1ff637d557f. >PMD: xgbe1: eDMA ring memory 0x1ff637d8000 - 0x1ff637d9fff. >PMD: xgbe1: iDMA ring 0 memory 0x1ff6377c000 - 0x1ff6377dfff. >PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported >PMD: rte_eth_allmulticast_disable: Function not supported Port 0: >EE:D1:53:72:82:5A Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, >start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit >Command: run cat /proc/meminfo >MemTotal: 8230464 kB >MemFree: 1765120 kB >Buffers: 0 kB >Cached: 42432 kB >SwapCached: 0 kB >Active: 27776 kB >Inactive: 8448 kB >Active(anon): 27776 kB >Inactive(anon): 8448 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 0 kB >Mapped: 3008 kB >Shmem: 17856 kB >Slab: 17984 kB >SReclaimable: 1280 kB >SUnreclaim: 16704 kB >KernelStack: 11456 kB >PageTables: 0 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 969472 kB >Committed_AS: 41280 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 50816 kB >HugePages_Total: 384 >HugePages_Free: 0 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 16384 kB > > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Thu, Sep 24, 2015 11:47 AM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Zhigang > I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not >work and exit. >Command: run cat /proc/meminfo >MemTotal: 8230464 kB >MemFree: 3872576 kB >Buffers: 0 kB >Cached: 12480 kB >SwapCached: 0 kB >Active: 11200 kB >Inactive: 5888 kB >Active(anon): 11200 kB >Inactive(anon): 5888 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 4736 kB >Mapped: 3072 kB >Shmem: 12480 kB >Slab: 16256 kB >SReclaimable: 768 kB >SUnreclaim: 15488 kB >KernelStack: 11648 kB >PageTables: 4096 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 2018048 kB >Committed_AS: 19328 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 37184 kB >HugePages_Total: 256 >HugePages_Free: 256 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 16384 kB > >Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init >instance 0 gxio_mpipe_init instance 1 >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0xc000000 bytes >EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000) >EAL: Ask a virtual area of 0xf4000000 bytes >EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2]) >EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e97af060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5]) >EAL: lcore 6 is ready (tid=e87af060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7]) >EAL: lcore 8 is ready (tid=dafff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12]) >EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14]) >EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13]) >EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=8efff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31]) Set txonly packet forwarding >mode Auto-start selected Configuring Port 0 (socket 0) >PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f. >PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, >start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >Regards, > Arthas > > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Thu, Sep 24, 2015 09:47 AM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Seems like something wrong with memseg, could you try with " --hvx >hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve >hugepages for DPDK, and check there are still such errors. > >With regard to MDE-4.3.3, please contact your local tech support. > >Thanks >-Zhigang > >>-----Original Message----- >>From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >>Sent: Wednesday, September 23, 2015 11:56 PM >>To: zlu; dev >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, ZhiGang, >> Can you tell me where can download TileraMDE-4.3.3 package? My >>tilegx tech supporter only send me TileraMDE-4.2.4 version! >>:) >> >>Thanks, >> Arthas >> >> >> >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 06:41 PM >>To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >> >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, ZhiGang >> I checked source code and debug it , found dpdk function >>rte_eth_tx_burst with tilegx return 0 and no other error. Can I contact you >directly? >>Regards, >> Arthas >> >> >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 06:35 PM >>To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >> >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, ZhiGang >> My tilegx boot parameter is "tile-monitor --dev gxpci${1} >>--hv-bin-dir /tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >>and testpmd start parameter is >>tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >>-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 >>--forward-mode=txonly -a --port-topology=chained -+- >> >> but xgbe1 can't xmit any packet. >>This is my run log: >> >>EAL: Detected lcore 0 as core 0 on socket 0 >>EAL: Detected lcore 1 as core 1 on socket 0 >>EAL: Detected lcore 2 as core 2 on socket 0 >>EAL: Detected lcore 3 as core 3 on socket 0 >>EAL: Detected lcore 4 as core 4 on socket 0 >>EAL: Detected lcore 5 as core 5 on socket 0 >>EAL: Detected lcore 6 as core 6 on socket 0 >>EAL: Detected lcore 7 as core 7 on socket 0 >>EAL: Detected lcore 8 as core 8 on socket 0 >>EAL: Detected lcore 9 as core 9 on socket 0 >>EAL: Detected lcore 10 as core 10 on socket 0 >>EAL: Detected lcore 11 as core 11 on socket 0 >>EAL: Detected lcore 12 as core 12 on socket 0 >>EAL: Detected lcore 13 as core 13 on socket 0 >>EAL: Detected lcore 14 as core 14 on socket 0 >>EAL: Detected lcore 15 as core 15 on socket 0 >>EAL: Detected lcore 16 as core 16 on socket 0 >>EAL: Detected lcore 17 as core 17 on socket 0 >>EAL: Detected lcore 18 as core 18 on socket 0 >>EAL: Detected lcore 19 as core 19 on socket 0 >>EAL: Detected lcore 20 as core 20 on socket 0 >>EAL: Detected lcore 21 as core 21 on socket 0 >>EAL: Detected lcore 22 as core 22 on socket 0 >>EAL: Detected lcore 23 as core 23 on socket 0 >>EAL: Detected lcore 24 as core 24 on socket 0 >>EAL: Detected lcore 25 as core 25 on socket 0 >>EAL: Detected lcore 26 as core 26 on socket 0 >>EAL: Detected lcore 27 as core 27 on socket 0 >>EAL: Detected lcore 28 as core 28 on socket 0 >>EAL: Detected lcore 29 as core 29 on socket 0 >>EAL: Detected lcore 30 as core 30 on socket 0 >>EAL: Detected lcore 31 as core 31 on socket 0 >>EAL: Detected lcore 32 as core 32 on socket 0 >>EAL: Detected lcore 33 as core 33 on socket 0 >>EAL: Detected lcore 34 as core 34 on socket 0 >>EAL: Detected lcore 35 as core 35 on socket 0 >>EAL: Support maximum 36 logical core(s) by configuration. >>EAL: Detected 36 lcore(s) >>EAL: No free hugepages reported in hugepages-1024kB >>EAL: Setting up physically contiguous memory... >>EAL: Ask a virtual area of 0x16000000 bytes >>EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >>EAL: Ask a virtual area of 0x90000000 bytes >>EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >>EAL: Ask a virtual area of 0x2000000 bytes >>EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >>EAL: Ask a virtual area of 0x10000000 bytes >>EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >>EAL: Ask a virtual area of 0x46000000 bytes >>EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >>EAL: Ask a virtual area of 0x2000000 bytes >>EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >>EAL: Requesting 128 pages of size 16MB from socket 0 >>EAL: TSC frequency is ~1199999 KHz >>EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using >>unreliable clock cycles ! >>EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >>PMD: mpipe init xgbe1 >>PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >>EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >>EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >>EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >>EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >>EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >>EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >>EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >>EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >>EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >>EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >>EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >>EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >>EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >>EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >>EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >>EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >>EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >>EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >>EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >>EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >>EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >>EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >>EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >>EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >>EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >>EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >>EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >>EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >>EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >>EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >>EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) Set txonly packet >>forwarding mode Auto-start selected Configuring Port 0 (socket 0) >>PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >>PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >>PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >>Port 0: EE:D1:53:72:82:5A >>Checking link statuses... >>Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline >>core given, start packet forwarding >> txonly packet forwarding - CRC stripping disabled - packets/burst=32 >> packet len=64 - nb packet segments=1 >> nb forwarding cores=1 - nb forwarding ports=1 >> RX queues=1 - RX desc=128 - RX free threshold=0 >> RX threshold registers: pthresh=0 hthresh=0 wthresh=0 >> TX queues=2 - TX desc=512 - TX free threshold=0 >> TX threshold registers: pthresh=0 hthresh=0 wthresh=0 >> TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit >> >> >>and another tilegx card output: >>Command: run mpipe-stat xgbe1 >>Link Tx pkt Tx bits Rx pkt Rx bits Tx err >>Rx err >>----------------------------------------------------------------------- >>---- >----- >>xgbe1 0 0 0 0 >>0 0 >> >> >> >>Regards, Arthas >> >> >>------------------ Original ------------------ >>From: "zlu";<zlu@ezchip.com>; >>Date: Wed, Sep 23, 2015 03:34 PM >>To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; >> >>Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, Arthas >> >>Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? >> >>>-----Original Message----- >>>From: Arthas [mailto:kangzy1982@qq.com] >>>Sent: Wednesday, September 23, 2015 1:21 PM >>>To: dev >>>Cc: zlu >>>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >>> >>>and I wrote a sample RX example, got an other information. >>> >>> >>>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >>> >>> >>> >>> Regards, Arthas >>> >>>------------------ Original ------------------ >>>From: "Arthas";<kangzy1982@qq.com>; >>>Date: Wed, Sep 23, 2015 01:17 PM >>>To: "dev"<dev@dpdk.org>; >>>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >>> >>>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen >>>for >>tilegx. >>>But I got a error with rte_mbuf rte_pktmbuf_append. >>> >>>PANIC in rte_mbuf_sanity_check(): >>>bad phys addr >>>7: [/trafgen(_start+0x70) [0x100b308]] >>>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>>5: [/trafgen(main+0x2148) [0x1017b78]] >>>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >>> >>> >>>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >>> >>> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-26 14:48 ` Arthas @ 2015-09-26 14:52 ` Arthas 0 siblings, 0 replies; 13+ messages in thread From: Arthas @ 2015-09-26 14:52 UTC (permalink / raw) To: zlu, dev Hi, Zhigang. and testpmd also can't send any packet success. Regards, Arthas ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Sat, Sep 26, 2015 10:48 PM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Zhigang, Thanks, I use mPIPE api can receive & send packets. but DPDK v2.1.0 with gx can't send & receive any packet. I guess hv layer dosn't see any memory pages and register change, so any edesc can't be reclaimed. Now I waiting for our tech supporter release MDE 4.3.3. Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Fri, Sep 25, 2015 10:44 PM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas I don't see the failed messages in your log, so that can't give you useful guidance. Are you running testpmd or your own apps? Can you generate some packets on another GX, and check if the dpdk can receive packets with testpmd. Overall, I recommend you to run our latest MDE, as that's we usually runs with DPDK, so that we can reproduce you case. Thanks -Zhigang >-----Original Message----- >From: Arthas [mailto:kangzy1982@qq.com] >Sent: Friday, September 25, 2015 12:38 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, Zhigang, > I fixed register memseg error, but gxio_mpipe_equeue_put_at send packet >still failed. >Command: run cat /proc/meminfo >MemTotal: 8230016 kB >MemFree: 3866688 kB >Buffers: 0 kB >Cached: 16576 kB >SwapCached: 0 kB >Active: 11392 kB >Inactive: 9088 kB >Active(anon): 11392 kB >Inactive(anon): 9088 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 0 kB >Mapped: 3072 kB >Shmem: 16320 kB >Slab: 17024 kB >SReclaimable: 768 kB >SUnreclaim: 16256 kB >KernelStack: 11456 kB >PageTables: 0 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 2017856 kB >Committed_AS: 22976 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 46144 kB >HugePages_Total: 4 >HugePages_Free: 0 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 1048576 kB > >_init_dpdk_eal_params: -c 0xffffffff -m 4096 -r 1 -n 1 --log-level 8 --vdev xgbe1 >--vdev xgbe2 --log-level 8 --no-hpet >main: rte_eal_init. >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x100000000 bytes >EAL: Virtual area found at 0x1fe40000000 (size = 0x100000000) >EAL: Requesting 4 pages of size 1024MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f34690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >PMD: mpipe init xgbe2 >PMD: xgbe2: Initialized mpipe device(mac ee:d1:53:72:82:5b). >EAL: lcore 1 is ready (tid=eb1df060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea9df060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea1df060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e99df060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e91df060;cpuset=[5]) >EAL: lcore 6 is ready (tid=e89df060;cpuset=[6]) >EAL: lcore 7 is ready (tid=dbfff060;cpuset=[7]) >EAL: lcore 8 is ready (tid=db7ff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=dafff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=da7ff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=d9fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=d97ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=d8fff060;cpuset=[13]) >EAL: lcore 15 is ready (tid=bbfff060;cpuset=[15]) >EAL: lcore 14 is ready (tid=d87ff060;cpuset=[14]) >EAL: lcore 16 is ready (tid=bb7ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=bafff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=ba7ff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b9fff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=b97ff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=b8fff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=b87ff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=93fff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=937ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=92fff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=927ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=91fff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=917ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=90fff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=907ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=73fff060;cpuset=[31]) >main: Detect CPU freq 1200000000 >main: Detect 32 CPU cores >main: Probe PCI ethernet devices. >main: Detect 2 Ethernet device >main: pid=2169 >_eth_dev_init: Init port 0 mbuf pool pkt_len=1986 nr_pkts=17536 cache=512 >_eth_dev_init: Init port 0 mbuf pool pkt_len=1730 nr_pkts=17536 cache=512 >pool=0x0x1ff36e3f5c0 success. >_eth_dev_init: Configure port 0 nr_tx=1 nr_rx=1 >_eth_dev_init: Configure port 0 rxq=0 rxd=128 >PMD: Allocate 128 iqueue descs. >PMD: Init mPIPE buffer stack size index 3 >_eth_dev_init: port 0: EE:D1:53:72:82:5A >_eth_dev_init: Configure port 0 txq=0 txd=1024 >PMD: Allocate one NotifRing for each queue. max=16 >PMD: Allocate a NotifGroup. >PMD: Allocate 256 buckets. >PMD: Allocate 1 mPIPE buffer stack. >PMD: gxio_mpipe_register_page . >PMD: Register mPIPE page 0x1fe40000000 size=1073741824, log2=30 must < >40 & > 12 >PMD: Register mPIPE page 0x1fe80000000 size=1073741824, log2=30 must < >40 & > 12 >PMD: Register mPIPE page 0x1fec0000000 size=1073741824, log2=30 must < 40 >& > 12 >PMD: Register mPIPE page 0x1ff00000000 size=1073741824, log2=30 must < 40 >& > 12 >PMD: xgbe1: Registered segment 0x1fe40000000 - 0x1ff3fffffff >PMD: Allocate mPIPE buffer stack size=65536 341K bytes.. >PMD: xgbe1: Buffer stack memory 0x1ff36de0000 - 0x1ff36e3557f. >PMD: xgbe1: eDMA ring memory 0x1ff36e3c000 - 0x1ff36e3dfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ff36e38000 - 0x1ff36e39fff. >PMD: xgbe1: Pushed mbuf 0x1ff3a550080, buffer 0x1ff3a550202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54f800, buffer 0x1ff3a54f982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54ef80, buffer 0x1ff3a54f102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54e700, buffer 0x1ff3a54e882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54de80, buffer 0x1ff3a54e002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54d600, buffer 0x1ff3a54d782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54cd80, buffer 0x1ff3a54cf02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54c500, buffer 0x1ff3a54c682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54bc80, buffer 0x1ff3a54be02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54b400, buffer 0x1ff3a54b582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54ab80, buffer 0x1ff3a54ad02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a54a300, buffer 0x1ff3a54a482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a549a80, buffer 0x1ff3a549c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a549200, buffer 0x1ff3a549382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a548980, buffer 0x1ff3a548b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a548100, buffer 0x1ff3a548282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a547880, buffer 0x1ff3a547a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a547000, buffer 0x1ff3a547182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a546780, buffer 0x1ff3a546902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a545f00, buffer 0x1ff3a546082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a545680, buffer 0x1ff3a545802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a544e00, buffer 0x1ff3a544f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a544580, buffer 0x1ff3a544702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a543d00, buffer 0x1ff3a543e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a543480, buffer 0x1ff3a543602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a542c00, buffer 0x1ff3a542d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a542380, buffer 0x1ff3a542502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a541b00, buffer 0x1ff3a541c82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a541280, buffer 0x1ff3a541402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a540a00, buffer 0x1ff3a540b82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a540180, buffer 0x1ff3a540302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53f900, buffer 0x1ff3a53fa82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53f080, buffer 0x1ff3a53f202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53e800, buffer 0x1ff3a53e982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53df80, buffer 0x1ff3a53e102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53d700, buffer 0x1ff3a53d882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53ce80, buffer 0x1ff3a53d002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53c600, buffer 0x1ff3a53c782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53bd80, buffer 0x1ff3a53bf02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53b500, buffer 0x1ff3a53b682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53ac80, buffer 0x1ff3a53ae02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a53a400, buffer 0x1ff3a53a582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a539b80, buffer 0x1ff3a539d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a539300, buffer 0x1ff3a539482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a538a80, buffer 0x1ff3a538c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a538200, buffer 0x1ff3a538382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a537980, buffer 0x1ff3a537b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a537100, buffer 0x1ff3a537282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a536880, buffer 0x1ff3a536a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a536000, buffer 0x1ff3a536182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a535780, buffer 0x1ff3a535902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a534f00, buffer 0x1ff3a535082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a534680, buffer 0x1ff3a534802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a533e00, buffer 0x1ff3a533f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a533580, buffer 0x1ff3a533702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a532d00, buffer 0x1ff3a532e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a532480, buffer 0x1ff3a532602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a531c00, buffer 0x1ff3a531d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a531380, buffer 0x1ff3a531502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a530b00, buffer 0x1ff3a530c82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a530280, buffer 0x1ff3a530402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52fa00, buffer 0x1ff3a52fb82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52f180, buffer 0x1ff3a52f302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52e900, buffer 0x1ff3a52ea82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52e080, buffer 0x1ff3a52e202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52d800, buffer 0x1ff3a52d982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52cf80, buffer 0x1ff3a52d102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52c700, buffer 0x1ff3a52c882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52be80, buffer 0x1ff3a52c002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52b600, buffer 0x1ff3a52b782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52ad80, buffer 0x1ff3a52af02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a52a500, buffer 0x1ff3a52a682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a529c80, buffer 0x1ff3a529e02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a529400, buffer 0x1ff3a529582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a528b80, buffer 0x1ff3a528d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a528300, buffer 0x1ff3a528482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a527a80, buffer 0x1ff3a527c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a527200, buffer 0x1ff3a527382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a526980, buffer 0x1ff3a526b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a526100, buffer 0x1ff3a526282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a525880, buffer 0x1ff3a525a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a525000, buffer 0x1ff3a525182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a524780, buffer 0x1ff3a524902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a523f00, buffer 0x1ff3a524082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a523680, buffer 0x1ff3a523802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a522e00, buffer 0x1ff3a522f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a522580, buffer 0x1ff3a522702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a521d00, buffer 0x1ff3a521e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a521480, buffer 0x1ff3a521602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a520c00, buffer 0x1ff3a520d82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a520380, buffer 0x1ff3a520502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51fb00, buffer 0x1ff3a51fc82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51f280, buffer 0x1ff3a51f402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51ea00, buffer 0x1ff3a51eb82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51e180, buffer 0x1ff3a51e302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51d900, buffer 0x1ff3a51da82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51d080, buffer 0x1ff3a51d202 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51c800, buffer 0x1ff3a51c982 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51bf80, buffer 0x1ff3a51c102 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51b700, buffer 0x1ff3a51b882 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51ae80, buffer 0x1ff3a51b002 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a51a600, buffer 0x1ff3a51a782 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a519d80, buffer 0x1ff3a519f02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a519500, buffer 0x1ff3a519682 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a518c80, buffer 0x1ff3a518e02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a518400, buffer 0x1ff3a518582 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a517b80, buffer 0x1ff3a517d02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a517300, buffer 0x1ff3a517482 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a516a80, buffer 0x1ff3a516c02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a516200, buffer 0x1ff3a516382 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a515980, buffer 0x1ff3a515b02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a515100, buffer 0x1ff3a515282 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a514880, buffer 0x1ff3a514a02 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a514000, buffer 0x1ff3a514182 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a513780, buffer 0x1ff3a513902 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a512f00, buffer 0x1ff3a513082 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a512680, buffer 0x1ff3a512802 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a511e00, buffer 0x1ff3a511f82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a511580, buffer 0x1ff3a511702 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a510d00, buffer 0x1ff3a510e82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a510480, buffer 0x1ff3a510602 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50fc00, buffer 0x1ff3a50fd82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50f380, buffer 0x1ff3a50f502 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50eb00, buffer 0x1ff3a50ec82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50e280, buffer 0x1ff3a50e402 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50da00, buffer 0x1ff3a50db82 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50d180, buffer 0x1ff3a50d302 into stack 2 >PMD: xgbe1: Pushed mbuf 0x1ff3a50c900, buffer 0x1ff3a50ca82 into stack 2 >PMD: xgbe1: Filled 128/128 buffers >PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported >PMD: rte_eth_allmulticast_disable: Function not supported >_eth_dev_init: start port 0 success. >_eth_dev_init: enable port 0 promiscuous. >main: Link Up - speed 10000 Mbps - full-duplex >_tx_pkts_rand_init: Alloc 32 mbuf for port=0 >_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 >_tx_pkts_rand_init: Prebuild 32 mbuf for port=0 done. >main: launch lcore 1 _mbuf_random_task task port=0 txq=0 >_mbuf_random_task: Start mbuf rand task port=0 pool=0x0x1ff36e3f5c0 >_mbuf_random_task: Start mbuf rand task daddr=192.168.1.245 dport=80 >_mbuf_random_task: Core 1 Exit.. >_tx_rand_task: Start TX rand task port=0 txq=0 pkts_burst=32 >_wait_for_dev_link_up: TX rand task Core 2 port 0 Link is Up >PMD: Trying to transmit 32 packets on xgbe1:0. >main: launch lcore 2 tx task port=0 txq=0 >PMD: xgbe1:0: Sending packet 0x1ff3a50c200, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50b980, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50b100, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50a880, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a50a000, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a509780, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a508f00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a508680, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a507e00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a507580, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a506d00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a506480, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a505c00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a505380, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a504b00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a504280, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a503a00, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a503180, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a502900, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a502080, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a501800, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a500f80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a500700, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4ffe80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4ff600, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fed80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fe500, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fdc80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fd400, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fcb80, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fc300, len 62 >PMD: xgbe1:0: Sending packet 0x1ff3a4fba80, len 62 >PMD: Ask the mPIPE hardware to egress outstanding packets immediately. >PMD: Wait for mPIPE equeue slot 32 complete. > >Regards. > Arthas >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Thu, Sep 24, 2015 01:38 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, Zhigang, > I checked error code and got a error information "(No more IOTLB entries)." & >xmit function gxio_mpipe_equeue_try_reserve_fast got "Insufficient DMA >credits"! > >Command: run ./testpmd -c 0xffffffff -m 6144 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 --forward-mode=txonly -a --port-topology=chained >gxio_mpipe_init instance 0 >gxio_mpipe_init instance 1 >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x80000000 bytes >EAL: Virtual area found at 0x1ff68000000 (size = 0x80000000) >EAL: Ask a virtual area of 0xc000000 bytes >EAL: Virtual area found at 0x1ff5b000000 (size = 0xc000000) >EAL: Ask a virtual area of 0xf4000000 bytes >EAL: Virtual area found at 0x1fe66000000 (size = 0xf4000000) >EAL: Requesting 384 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f94690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eaf3f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea73f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=e9f3f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e973f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e8f3f060;cpuset=[5]) >EAL: lcore 6 is ready (tid=67fff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=677ff060;cpuset=[7]) >EAL: lcore 8 is ready (tid=5afff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=5a7ff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=65fff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=657ff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=64fff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=647ff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=3ffff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=3f7ff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=3efff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=3e7ff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=3dfff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=3d7ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=3cfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=3c7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=1bfff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=1b7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=1afff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=1a7ff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=19fff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=197ff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=18fff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=187ff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=f7fff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f77ff060;cpuset=[31]) Set txonly packet forwarding >mode Auto-start selected Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ff68000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Could not register memseg @0x1ff5b000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Could not register memseg @0x1fe66000000, -1111(No more >IOTLB entries). >PMD: xgbe1: Buffer stack memory 0x1ff63780000 - 0x1ff637d557f. >PMD: xgbe1: eDMA ring memory 0x1ff637d8000 - 0x1ff637d9fff. >PMD: xgbe1: iDMA ring 0 memory 0x1ff6377c000 - 0x1ff6377dfff. >PMD: rte_eth_dev_config_restore: port 0: MAC address array not supported >PMD: rte_eth_allmulticast_disable: Function not supported Port 0: >EE:D1:53:72:82:5A Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, >start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit >Command: run cat /proc/meminfo >MemTotal: 8230464 kB >MemFree: 1765120 kB >Buffers: 0 kB >Cached: 42432 kB >SwapCached: 0 kB >Active: 27776 kB >Inactive: 8448 kB >Active(anon): 27776 kB >Inactive(anon): 8448 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 0 kB >Mapped: 3008 kB >Shmem: 17856 kB >Slab: 17984 kB >SReclaimable: 1280 kB >SUnreclaim: 16704 kB >KernelStack: 11456 kB >PageTables: 0 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 969472 kB >Committed_AS: 41280 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 50816 kB >HugePages_Total: 384 >HugePages_Free: 0 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 16384 kB > > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Thu, Sep 24, 2015 11:47 AM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Zhigang > I used "--hvx hugepagesz=16m --hvx hugepages=256", but testpmd still not >work and exit. >Command: run cat /proc/meminfo >MemTotal: 8230464 kB >MemFree: 3872576 kB >Buffers: 0 kB >Cached: 12480 kB >SwapCached: 0 kB >Active: 11200 kB >Inactive: 5888 kB >Active(anon): 11200 kB >Inactive(anon): 5888 kB >Active(file): 0 kB >Inactive(file): 0 kB >Unevictable: 0 kB >Mlocked: 0 kB >SwapTotal: 0 kB >SwapFree: 0 kB >Dirty: 0 kB >Writeback: 0 kB >AnonPages: 4736 kB >Mapped: 3072 kB >Shmem: 12480 kB >Slab: 16256 kB >SReclaimable: 768 kB >SUnreclaim: 15488 kB >KernelStack: 11648 kB >PageTables: 4096 kB >NFS_Unstable: 0 kB >Bounce: 0 kB >WritebackTmp: 0 kB >CommitLimit: 2018048 kB >Committed_AS: 19328 kB >VmallocTotal: 4194304 kB >VmallocUsed: 224704 kB >VmallocChunk: 3964864 kB >Sequestered: 37184 kB >HugePages_Total: 256 >HugePages_Free: 256 >HugePages_Rsvd: 0 >HugePages_Surp: 0 >Hugepagesize: 16384 kB > >Command: run ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 --forward-mode=txonly -a --port-topology=chained gxio_mpipe_init >instance 0 gxio_mpipe_init instance 1 >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0xc000000 bytes >EAL: Virtual area found at 0x1ffdb000000 (size = 0xc000000) >EAL: Ask a virtual area of 0xf4000000 bytes >EAL: Virtual area found at 0x1fee6000000 (size = 0xf4000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7f04690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eafaf060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea7af060;cpuset=[2]) >EAL: lcore 3 is ready (tid=e9faf060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e97af060;cpuset=[4]) >EAL: lcore 5 is ready (tid=e8faf060;cpuset=[5]) >EAL: lcore 6 is ready (tid=e87af060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e7faf060;cpuset=[7]) >EAL: lcore 8 is ready (tid=dafff060;cpuset=[8]) >EAL: lcore 9 is ready (tid=da7ff060;cpuset=[9]) >EAL: lcore 10 is ready (tid=d9fff060;cpuset=[10]) >EAL: lcore 11 is ready (tid=d97ff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=d8fff060;cpuset=[12]) >EAL: lcore 14 is ready (tid=b3fff060;cpuset=[14]) >EAL: lcore 13 is ready (tid=d87ff060;cpuset=[13]) >EAL: lcore 15 is ready (tid=b37ff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b2fff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b27ff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=b1fff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b17ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=b0fff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=b07ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=8ffff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=8f7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=8efff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=8e7ff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=8dfff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=8d7ff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=8cfff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=8c7ff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=6bfff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=6b7ff060;cpuset=[31]) Set txonly packet forwarding >mode Auto-start selected Configuring Port 0 (socket 0) >PMD: xgbe1: Registered segment 0x1ffdb000000 - 0x1ffe6ffffff >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffe3780000 - 0x1ffe37d557f. >PMD: xgbe1: eDMA ring memory 0x1ffe37d8000 - 0x1ffe37d9fff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffe377c000 - 0x1ffe377dfff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, >start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >Regards, > Arthas > > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Thu, Sep 24, 2015 09:47 AM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Seems like something wrong with memseg, could you try with " --hvx >hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve >hugepages for DPDK, and check there are still such errors. > >With regard to MDE-4.3.3, please contact your local tech support. > >Thanks >-Zhigang > >>-----Original Message----- >>From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >>Sent: Wednesday, September 23, 2015 11:56 PM >>To: zlu; dev >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, ZhiGang, >> Can you tell me where can download TileraMDE-4.3.3 package? My >>tilegx tech supporter only send me TileraMDE-4.2.4 version! >>:) >> >>Thanks, >> Arthas >> >> >> >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 06:41 PM >>To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >> >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, ZhiGang >> I checked source code and debug it , found dpdk function >>rte_eth_tx_burst with tilegx return 0 and no other error. Can I contact you >directly? >>Regards, >> Arthas >> >> >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 06:35 PM >>To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; >> >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, ZhiGang >> My tilegx boot parameter is "tile-monitor --dev gxpci${1} >>--hv-bin-dir /tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >>and testpmd start parameter is >>tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >>-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 >--tx=2 >>--forward-mode=txonly -a --port-topology=chained -+- >> >> but xgbe1 can't xmit any packet. >>This is my run log: >> >>EAL: Detected lcore 0 as core 0 on socket 0 >>EAL: Detected lcore 1 as core 1 on socket 0 >>EAL: Detected lcore 2 as core 2 on socket 0 >>EAL: Detected lcore 3 as core 3 on socket 0 >>EAL: Detected lcore 4 as core 4 on socket 0 >>EAL: Detected lcore 5 as core 5 on socket 0 >>EAL: Detected lcore 6 as core 6 on socket 0 >>EAL: Detected lcore 7 as core 7 on socket 0 >>EAL: Detected lcore 8 as core 8 on socket 0 >>EAL: Detected lcore 9 as core 9 on socket 0 >>EAL: Detected lcore 10 as core 10 on socket 0 >>EAL: Detected lcore 11 as core 11 on socket 0 >>EAL: Detected lcore 12 as core 12 on socket 0 >>EAL: Detected lcore 13 as core 13 on socket 0 >>EAL: Detected lcore 14 as core 14 on socket 0 >>EAL: Detected lcore 15 as core 15 on socket 0 >>EAL: Detected lcore 16 as core 16 on socket 0 >>EAL: Detected lcore 17 as core 17 on socket 0 >>EAL: Detected lcore 18 as core 18 on socket 0 >>EAL: Detected lcore 19 as core 19 on socket 0 >>EAL: Detected lcore 20 as core 20 on socket 0 >>EAL: Detected lcore 21 as core 21 on socket 0 >>EAL: Detected lcore 22 as core 22 on socket 0 >>EAL: Detected lcore 23 as core 23 on socket 0 >>EAL: Detected lcore 24 as core 24 on socket 0 >>EAL: Detected lcore 25 as core 25 on socket 0 >>EAL: Detected lcore 26 as core 26 on socket 0 >>EAL: Detected lcore 27 as core 27 on socket 0 >>EAL: Detected lcore 28 as core 28 on socket 0 >>EAL: Detected lcore 29 as core 29 on socket 0 >>EAL: Detected lcore 30 as core 30 on socket 0 >>EAL: Detected lcore 31 as core 31 on socket 0 >>EAL: Detected lcore 32 as core 32 on socket 0 >>EAL: Detected lcore 33 as core 33 on socket 0 >>EAL: Detected lcore 34 as core 34 on socket 0 >>EAL: Detected lcore 35 as core 35 on socket 0 >>EAL: Support maximum 36 logical core(s) by configuration. >>EAL: Detected 36 lcore(s) >>EAL: No free hugepages reported in hugepages-1024kB >>EAL: Setting up physically contiguous memory... >>EAL: Ask a virtual area of 0x16000000 bytes >>EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >>EAL: Ask a virtual area of 0x90000000 bytes >>EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >>EAL: Ask a virtual area of 0x2000000 bytes >>EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >>EAL: Ask a virtual area of 0x10000000 bytes >>EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >>EAL: Ask a virtual area of 0x46000000 bytes >>EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >>EAL: Ask a virtual area of 0x2000000 bytes >>EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >>EAL: Requesting 128 pages of size 16MB from socket 0 >>EAL: TSC frequency is ~1199999 KHz >>EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using >>unreliable clock cycles ! >>EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >>PMD: mpipe init xgbe1 >>PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >>EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >>EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >>EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >>EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >>EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >>EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >>EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >>EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >>EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >>EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >>EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >>EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >>EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >>EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >>EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >>EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >>EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >>EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >>EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >>EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >>EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >>EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >>EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >>EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >>EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >>EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >>EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >>EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >>EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >>EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >>EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) Set txonly packet >>forwarding mode Auto-start selected Configuring Port 0 (socket 0) >>PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >>PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >>PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >>Port 0: EE:D1:53:72:82:5A >>Checking link statuses... >>Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline >>core given, start packet forwarding >> txonly packet forwarding - CRC stripping disabled - packets/burst=32 >> packet len=64 - nb packet segments=1 >> nb forwarding cores=1 - nb forwarding ports=1 >> RX queues=1 - RX desc=128 - RX free threshold=0 >> RX threshold registers: pthresh=0 hthresh=0 wthresh=0 >> TX queues=2 - TX desc=512 - TX free threshold=0 >> TX threshold registers: pthresh=0 hthresh=0 wthresh=0 >> TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit >> >> >>and another tilegx card output: >>Command: run mpipe-stat xgbe1 >>Link Tx pkt Tx bits Rx pkt Rx bits Tx err >>Rx err >>----------------------------------------------------------------------- >>---- >----- >>xgbe1 0 0 0 0 >>0 0 >> >> >> >>Regards, Arthas >> >> >>------------------ Original ------------------ >>From: "zlu";<zlu@ezchip.com>; >>Date: Wed, Sep 23, 2015 03:34 PM >>To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; >> >>Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >> >> >>Hi, Arthas >> >>Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? >> >>>-----Original Message----- >>>From: Arthas [mailto:kangzy1982@qq.com] >>>Sent: Wednesday, September 23, 2015 1:21 PM >>>To: dev >>>Cc: zlu >>>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >>> >>>and I wrote a sample RX example, got an other information. >>> >>> >>>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >>> >>> >>> >>> Regards, Arthas >>> >>>------------------ Original ------------------ >>>From: "Arthas";<kangzy1982@qq.com>; >>>Date: Wed, Sep 23, 2015 01:17 PM >>>To: "dev"<dev@dpdk.org>; >>>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >>> >>>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen >>>for >>tilegx. >>>But I got a error with rte_mbuf rte_pktmbuf_append. >>> >>>PANIC in rte_mbuf_sanity_check(): >>>bad phys addr >>>7: [/trafgen(_start+0x70) [0x100b308]] >>>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>>5: [/trafgen(main+0x2148) [0x1017b78]] >>>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >>> >>> >>>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >>> >>> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
@ 2015-09-23 10:35 Arthas
2015-09-23 10:41 ` Arthas
0 siblings, 1 reply; 13+ messages in thread
From: Arthas @ 2015-09-23 10:35 UTC (permalink / raw)
To: zlu, dev
Hi, ZhiGang
My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir /tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64".
and testpmd start parameter is
tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run -+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained -+-
but xgbe1 can't xmit any packet.
This is my run log:
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 8 on socket 0
EAL: Detected lcore 9 as core 9 on socket 0
EAL: Detected lcore 10 as core 10 on socket 0
EAL: Detected lcore 11 as core 11 on socket 0
EAL: Detected lcore 12 as core 12 on socket 0
EAL: Detected lcore 13 as core 13 on socket 0
EAL: Detected lcore 14 as core 14 on socket 0
EAL: Detected lcore 15 as core 15 on socket 0
EAL: Detected lcore 16 as core 16 on socket 0
EAL: Detected lcore 17 as core 17 on socket 0
EAL: Detected lcore 18 as core 18 on socket 0
EAL: Detected lcore 19 as core 19 on socket 0
EAL: Detected lcore 20 as core 20 on socket 0
EAL: Detected lcore 21 as core 21 on socket 0
EAL: Detected lcore 22 as core 22 on socket 0
EAL: Detected lcore 23 as core 23 on socket 0
EAL: Detected lcore 24 as core 24 on socket 0
EAL: Detected lcore 25 as core 25 on socket 0
EAL: Detected lcore 26 as core 26 on socket 0
EAL: Detected lcore 27 as core 27 on socket 0
EAL: Detected lcore 28 as core 28 on socket 0
EAL: Detected lcore 29 as core 29 on socket 0
EAL: Detected lcore 30 as core 30 on socket 0
EAL: Detected lcore 31 as core 31 on socket 0
EAL: Detected lcore 32 as core 32 on socket 0
EAL: Detected lcore 33 as core 33 on socket 0
EAL: Detected lcore 34 as core 34 on socket 0
EAL: Detected lcore 35 as core 35 on socket 0
EAL: Support maximum 36 logical core(s) by configuration.
EAL: Detected 36 lcore(s)
EAL: No free hugepages reported in hugepages-1024kB
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x16000000 bytes
EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000)
EAL: Ask a virtual area of 0x90000000 bytes
EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000)
EAL: Ask a virtual area of 0x2000000 bytes
EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000)
EAL: Ask a virtual area of 0x10000000 bytes
EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000)
EAL: Ask a virtual area of 0x46000000 bytes
EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000)
EAL: Ask a virtual area of 0x2000000 bytes
EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000)
EAL: Requesting 128 pages of size 16MB from socket 0
EAL: TSC frequency is ~1199999 KHz
EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles !
EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0])
PMD: mpipe init xgbe1
PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a).
EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1])
EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2])
EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3])
EAL: lcore 4 is ready (tid=e984f060;cpuset=[4])
EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5])
EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6])
EAL: lcore 7 is ready (tid=e904f060;cpuset=[7])
EAL: lcore 8 is ready (tid=e884f060;cpuset=[8])
EAL: lcore 9 is ready (tid=e804f060;cpuset=[9])
EAL: lcore 10 is ready (tid=e784f060;cpuset=[10])
EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11])
EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12])
EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13])
EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14])
EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15])
EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16])
EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17])
EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18])
EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19])
EAL: lcore 20 is ready (tid=abfff060;cpuset=[20])
EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21])
EAL: lcore 22 is ready (tid=aafff060;cpuset=[22])
EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23])
EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24])
EAL: lcore 25 is ready (tid=2efff060;cpuset=[25])
EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26])
EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27])
EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28])
EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29])
EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30])
EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31])
Set txonly packet forwarding mode
Auto-start selected
Configuring Port 0 (socket 0)
PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111.
PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111.
PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f.
PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff.
PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff.
Port 0: EE:D1:53:72:82:5A
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
No commandline core given, start packet forwarding
txonly packet forwarding - CRC stripping disabled - packets/burst=32
packet len=64 - nb packet segments=1
nb forwarding cores=1 - nb forwarding ports=1
RX queues=1 - RX desc=128 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX queues=2 - TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX RS bit threshold=0 - TXQ flags=0x0
Press enter to exit
and another tilegx card output:
Command: run mpipe-stat xgbe1
Link Tx pkt Tx bits Rx pkt Rx bits Tx err Rx err
--------------------------------------------------------------------------------
xgbe1 0 0 0 0 0 0
Regards, Arthas
------------------ Original ------------------
From: "zlu";<zlu@ezchip.com>;
Date: Wed, Sep 23, 2015 03:34 PM
To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>;
Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
Hi, Arthas
Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx?
>-----Original Message-----
>From: Arthas [mailto:kangzy1982@qq.com]
>Sent: Wednesday, September 23, 2015 1:21 PM
>To: dev
>Cc: zlu
>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>and I wrote a sample RX example, got an other information.
>
>
>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111.
>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111.
>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111.
>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111.
>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111.
>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111.
>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f.
>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff.
>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff.
>
>
>
> Regards, Arthas
>
>------------------ Original ------------------
>From: "Arthas";<kangzy1982@qq.com>;
>Date: Wed, Sep 23, 2015 01:17 PM
>To: "dev"<dev@dpdk.org>;
>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597
>
>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for
tilegx.
>But I got a error with rte_mbuf rte_pktmbuf_append.
>
>PANIC in rte_mbuf_sanity_check():
>bad phys addr
>7: [/trafgen(_start+0x70) [0x100b308]]
>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]]
>5: [/trafgen(main+0x2148) [0x1017b78]]
>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]]
>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]]
>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]]
>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]]
>
>
>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y!
>
> Regards, Arthas
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-23 10:35 Arthas @ 2015-09-23 10:41 ` Arthas 2015-09-23 15:55 ` Arthas 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-23 10:41 UTC (permalink / raw) To: zlu, dev Hi, ZhiGang I checked source code and debug it , found dpdk function rte_eth_tx_burst with tilegx return 0 and no other error. Can I contact you directly? Regards, Arthas ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Wed, Sep 23, 2015 06:35 PM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, ZhiGang My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir /tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". and testpmd start parameter is tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run -+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained -+- but xgbe1 can't xmit any packet. This is my run log: EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: No free hugepages reported in hugepages-1024kB EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0x16000000 bytes EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) EAL: Ask a virtual area of 0x90000000 bytes EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) EAL: Ask a virtual area of 0x2000000 bytes EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) EAL: Ask a virtual area of 0x10000000 bytes EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) EAL: Ask a virtual area of 0x46000000 bytes EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) EAL: Ask a virtual area of 0x2000000 bytes EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) EAL: Requesting 128 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit and another tilegx card output: Command: run mpipe-stat xgbe1 Link Tx pkt Tx bits Rx pkt Rx bits Tx err Rx err -------------------------------------------------------------------------------- xgbe1 0 0 0 0 0 0 Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Wed, Sep 23, 2015 03:34 PM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? >-----Original Message----- >From: Arthas [mailto:kangzy1982@qq.com] >Sent: Wednesday, September 23, 2015 1:21 PM >To: dev >Cc: zlu >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >and I wrote a sample RX example, got an other information. > > >PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. > > > > Regards, Arthas > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 01:17 PM >To: "dev"<dev@dpdk.org>; >Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for tilegx. >But I got a error with rte_mbuf rte_pktmbuf_append. > >PANIC in rte_mbuf_sanity_check(): >bad phys addr >7: [/trafgen(_start+0x70) [0x100b308]] >6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >5: [/trafgen(main+0x2148) [0x1017b78]] >4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] > > >DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! > > Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-23 10:41 ` Arthas @ 2015-09-23 15:55 ` Arthas 2015-09-24 1:47 ` Tony Lu 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-23 15:55 UTC (permalink / raw) To: zlu, dev Hi, ZhiGang, Can you tell me where can download TileraMDE-4.3.3 package? My tilegx tech supporter only send me TileraMDE-4.2.4 version! :) Thanks, Arthas ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Wed, Sep 23, 2015 06:41 PM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, ZhiGang I checked source code and debug it , found dpdk function rte_eth_tx_burst with tilegx return 0 and no other error. Can I contact you directly? Regards, Arthas ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Wed, Sep 23, 2015 06:35 PM To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, ZhiGang My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir /tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". and testpmd start parameter is tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run -+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 --forward-mode=txonly -a --port-topology=chained -+- but xgbe1 can't xmit any packet. This is my run log: EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 8 on socket 0 EAL: Detected lcore 9 as core 9 on socket 0 EAL: Detected lcore 10 as core 10 on socket 0 EAL: Detected lcore 11 as core 11 on socket 0 EAL: Detected lcore 12 as core 12 on socket 0 EAL: Detected lcore 13 as core 13 on socket 0 EAL: Detected lcore 14 as core 14 on socket 0 EAL: Detected lcore 15 as core 15 on socket 0 EAL: Detected lcore 16 as core 16 on socket 0 EAL: Detected lcore 17 as core 17 on socket 0 EAL: Detected lcore 18 as core 18 on socket 0 EAL: Detected lcore 19 as core 19 on socket 0 EAL: Detected lcore 20 as core 20 on socket 0 EAL: Detected lcore 21 as core 21 on socket 0 EAL: Detected lcore 22 as core 22 on socket 0 EAL: Detected lcore 23 as core 23 on socket 0 EAL: Detected lcore 24 as core 24 on socket 0 EAL: Detected lcore 25 as core 25 on socket 0 EAL: Detected lcore 26 as core 26 on socket 0 EAL: Detected lcore 27 as core 27 on socket 0 EAL: Detected lcore 28 as core 28 on socket 0 EAL: Detected lcore 29 as core 29 on socket 0 EAL: Detected lcore 30 as core 30 on socket 0 EAL: Detected lcore 31 as core 31 on socket 0 EAL: Detected lcore 32 as core 32 on socket 0 EAL: Detected lcore 33 as core 33 on socket 0 EAL: Detected lcore 34 as core 34 on socket 0 EAL: Detected lcore 35 as core 35 on socket 0 EAL: Support maximum 36 logical core(s) by configuration. EAL: Detected 36 lcore(s) EAL: No free hugepages reported in hugepages-1024kB EAL: Setting up physically contiguous memory... EAL: Ask a virtual area of 0x16000000 bytes EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) EAL: Ask a virtual area of 0x90000000 bytes EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) EAL: Ask a virtual area of 0x2000000 bytes EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) EAL: Ask a virtual area of 0x10000000 bytes EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) EAL: Ask a virtual area of 0x46000000 bytes EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) EAL: Ask a virtual area of 0x2000000 bytes EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) EAL: Requesting 128 pages of size 16MB from socket 0 EAL: TSC frequency is ~1199999 KHz EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable clock cycles ! EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) PMD: mpipe init xgbe1 PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) Set txonly packet forwarding mode Auto-start selected Configuring Port 0 (socket 0) PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. Port 0: EE:D1:53:72:82:5A Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Done No commandline core given, start packet forwarding txonly packet forwarding - CRC stripping disabled - packets/burst=32 packet len=64 - nb packet segments=1 nb forwarding cores=1 - nb forwarding ports=1 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=2 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 Press enter to exit and another tilegx card output: Command: run mpipe-stat xgbe1 Link Tx pkt Tx bits Rx pkt Rx bits Tx err Rx err -------------------------------------------------------------------------------- xgbe1 0 0 0 0 0 0 Regards, Arthas ------------------ Original ------------------ From: "zlu";<zlu@ezchip.com>; Date: Wed, Sep 23, 2015 03:34 PM To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, Arthas Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? >-----Original Message----- >From: Arthas [mailto:kangzy1982@qq.com] >Sent: Wednesday, September 23, 2015 1:21 PM >To: dev >Cc: zlu >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >and I wrote a sample RX example, got an other information. > > >PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. > > > > Regards, Arthas > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 01:17 PM >To: "dev"<dev@dpdk.org>; >Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for tilegx. >But I got a error with rte_mbuf rte_pktmbuf_append. > >PANIC in rte_mbuf_sanity_check(): >bad phys addr >7: [/trafgen(_start+0x70) [0x100b308]] >6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >5: [/trafgen(main+0x2148) [0x1017b78]] >4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] > > >DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! > > Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-23 15:55 ` Arthas @ 2015-09-24 1:47 ` Tony Lu 0 siblings, 0 replies; 13+ messages in thread From: Tony Lu @ 2015-09-24 1:47 UTC (permalink / raw) To: 'Arthas', 'dev' Hi, Arthas Seems like something wrong with memseg, could you try with " --hvx hugepagesz=1G --hvx hugepages=4" to boot Gx card? This helps reserve hugepages for DPDK, and check there are still such errors. With regard to MDE-4.3.3, please contact your local tech support. Thanks -Zhigang >-----Original Message----- >From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Arthas >Sent: Wednesday, September 23, 2015 11:56 PM >To: zlu; dev >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, ZhiGang, > Can you tell me where can download TileraMDE-4.3.3 package? My tilegx >tech supporter only send me TileraMDE-4.2.4 version! >:) > >Thanks, > Arthas > > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:41 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > I checked source code and debug it , found dpdk function rte_eth_tx_burst >with tilegx return 0 and no other error. Can I contact you directly? >Regards, > Arthas > > > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 06:35 PM >To: "zlu"<zlu@ezchip.com>; "dev"<dev@dpdk.org>; > >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, ZhiGang > My tilegx boot parameter is "tile-monitor --dev gxpci${1} --hv-bin-dir >/tilegx/tile/hv-bin-dir424/ --hvx dataplane=1-64". >and testpmd start parameter is >tile-monitor --dev gxpci0 --resume --upload testpmd testpmd --run >-+- ./testpmd -c 0xffffffff -m 2048 -n 1 -r 1 --vdev xgbe1 -- --rx=1 --tx=2 >--forward-mode=txonly -a --port-topology=chained -+- > > but xgbe1 can't xmit any packet. >This is my run log: > >EAL: Detected lcore 0 as core 0 on socket 0 >EAL: Detected lcore 1 as core 1 on socket 0 >EAL: Detected lcore 2 as core 2 on socket 0 >EAL: Detected lcore 3 as core 3 on socket 0 >EAL: Detected lcore 4 as core 4 on socket 0 >EAL: Detected lcore 5 as core 5 on socket 0 >EAL: Detected lcore 6 as core 6 on socket 0 >EAL: Detected lcore 7 as core 7 on socket 0 >EAL: Detected lcore 8 as core 8 on socket 0 >EAL: Detected lcore 9 as core 9 on socket 0 >EAL: Detected lcore 10 as core 10 on socket 0 >EAL: Detected lcore 11 as core 11 on socket 0 >EAL: Detected lcore 12 as core 12 on socket 0 >EAL: Detected lcore 13 as core 13 on socket 0 >EAL: Detected lcore 14 as core 14 on socket 0 >EAL: Detected lcore 15 as core 15 on socket 0 >EAL: Detected lcore 16 as core 16 on socket 0 >EAL: Detected lcore 17 as core 17 on socket 0 >EAL: Detected lcore 18 as core 18 on socket 0 >EAL: Detected lcore 19 as core 19 on socket 0 >EAL: Detected lcore 20 as core 20 on socket 0 >EAL: Detected lcore 21 as core 21 on socket 0 >EAL: Detected lcore 22 as core 22 on socket 0 >EAL: Detected lcore 23 as core 23 on socket 0 >EAL: Detected lcore 24 as core 24 on socket 0 >EAL: Detected lcore 25 as core 25 on socket 0 >EAL: Detected lcore 26 as core 26 on socket 0 >EAL: Detected lcore 27 as core 27 on socket 0 >EAL: Detected lcore 28 as core 28 on socket 0 >EAL: Detected lcore 29 as core 29 on socket 0 >EAL: Detected lcore 30 as core 30 on socket 0 >EAL: Detected lcore 31 as core 31 on socket 0 >EAL: Detected lcore 32 as core 32 on socket 0 >EAL: Detected lcore 33 as core 33 on socket 0 >EAL: Detected lcore 34 as core 34 on socket 0 >EAL: Detected lcore 35 as core 35 on socket 0 >EAL: Support maximum 36 logical core(s) by configuration. >EAL: Detected 36 lcore(s) >EAL: No free hugepages reported in hugepages-1024kB >EAL: Setting up physically contiguous memory... >EAL: Ask a virtual area of 0x16000000 bytes >EAL: Virtual area found at 0x1ffd1000000 (size = 0x16000000) >EAL: Ask a virtual area of 0x90000000 bytes >EAL: Virtual area found at 0x1ff40000000 (size = 0x90000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1ff3d000000 (size = 0x2000000) >EAL: Ask a virtual area of 0x10000000 bytes >EAL: Virtual area found at 0x1ff2c000000 (size = 0x10000000) >EAL: Ask a virtual area of 0x46000000 bytes >EAL: Virtual area found at 0x1fee5000000 (size = 0x46000000) >EAL: Ask a virtual area of 0x2000000 bytes >EAL: Virtual area found at 0x1fee2000000 (size = 0x2000000) >EAL: Requesting 128 pages of size 16MB from socket 0 >EAL: TSC frequency is ~1199999 KHz >EAL: WARNING: cpu flags constant_tsc=no nonstop_tsc=no -> using unreliable >clock cycles ! >EAL: Master lcore 0 is ready (tid=f7fa4690;cpuset=[0]) >PMD: mpipe init xgbe1 >PMD: xgbe1: Initialized mpipe device(mac ee:d1:53:72:82:5a). >EAL: lcore 1 is ready (tid=eb04f060;cpuset=[1]) >EAL: lcore 2 is ready (tid=ea84f060;cpuset=[2]) >EAL: lcore 3 is ready (tid=ea04f060;cpuset=[3]) >EAL: lcore 4 is ready (tid=e984f060;cpuset=[4]) >EAL: lcore 5 is ready (tid=d0fff060;cpuset=[5]) >EAL: lcore 6 is ready (tid=d07ff060;cpuset=[6]) >EAL: lcore 7 is ready (tid=e904f060;cpuset=[7]) >EAL: lcore 8 is ready (tid=e884f060;cpuset=[8]) >EAL: lcore 9 is ready (tid=e804f060;cpuset=[9]) >EAL: lcore 10 is ready (tid=e784f060;cpuset=[10]) >EAL: lcore 11 is ready (tid=b3fff060;cpuset=[11]) >EAL: lcore 12 is ready (tid=b37ff060;cpuset=[12]) >EAL: lcore 13 is ready (tid=b2fff060;cpuset=[13]) >EAL: lcore 14 is ready (tid=b27ff060;cpuset=[14]) >EAL: lcore 15 is ready (tid=b1fff060;cpuset=[15]) >EAL: lcore 16 is ready (tid=b17ff060;cpuset=[16]) >EAL: lcore 17 is ready (tid=b0fff060;cpuset=[17]) >EAL: lcore 18 is ready (tid=2ffff060;cpuset=[18]) >EAL: lcore 19 is ready (tid=b07ff060;cpuset=[19]) >EAL: lcore 20 is ready (tid=abfff060;cpuset=[20]) >EAL: lcore 21 is ready (tid=ab7ff060;cpuset=[21]) >EAL: lcore 22 is ready (tid=aafff060;cpuset=[22]) >EAL: lcore 23 is ready (tid=aa7ff060;cpuset=[23]) >EAL: lcore 24 is ready (tid=2f7ff060;cpuset=[24]) >EAL: lcore 25 is ready (tid=2efff060;cpuset=[25]) >EAL: lcore 26 is ready (tid=2e7ff060;cpuset=[26]) >EAL: lcore 27 is ready (tid=2dfff060;cpuset=[27]) >EAL: lcore 28 is ready (tid=2d7ff060;cpuset=[28]) >EAL: lcore 29 is ready (tid=2cfff060;cpuset=[29]) >EAL: lcore 30 is ready (tid=2c7ff060;cpuset=[30]) >EAL: lcore 31 is ready (tid=f3fff060;cpuset=[31]) >Set txonly packet forwarding mode >Auto-start selected >Configuring Port 0 (socket 0) >PMD: xgbe1: Could not register memseg @0x1ffd1000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff40000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1ffd1c30000 - 0x1ffd1c8557f. >PMD: xgbe1: eDMA ring memory 0x1ffd1c8a000 - 0x1ffd1c8bfff. >PMD: xgbe1: iDMA ring 0 memory 0x1ffd1c86000 - 0x1ffd1c87fff. >Port 0: EE:D1:53:72:82:5A >Checking link statuses... >Port 0 Link Up - speed 10000 Mbps - full-duplex >Done >No commandline core given, start packet forwarding > txonly packet forwarding - CRC stripping disabled - packets/burst=32 > packet len=64 - nb packet segments=1 > nb forwarding cores=1 - nb forwarding ports=1 > RX queues=1 - RX desc=128 - RX free threshold=0 > RX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX queues=2 - TX desc=512 - TX free threshold=0 > TX threshold registers: pthresh=0 hthresh=0 wthresh=0 > TX RS bit threshold=0 - TXQ flags=0x0 >Press enter to exit > > >and another tilegx card output: >Command: run mpipe-stat xgbe1 >Link Tx pkt Tx bits Rx pkt Rx bits Tx err >Rx err >--------------------------------------------------------------------------- ----- >xgbe1 0 0 0 0 >0 0 > > > >Regards, Arthas > > >------------------ Original ------------------ >From: "zlu";<zlu@ezchip.com>; >Date: Wed, Sep 23, 2015 03:34 PM >To: "Arthas"<kangzy1982@qq.com>; "'dev'"<dev@dpdk.org>; > >Subject: RE: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > > > >Hi, Arthas > >Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? > >>-----Original Message----- >>From: Arthas [mailto:kangzy1982@qq.com] >>Sent: Wednesday, September 23, 2015 1:21 PM >>To: dev >>Cc: zlu >>Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>and I wrote a sample RX example, got an other information. >> >> >>PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >>PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >>PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >>PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >>PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. >> >> >> >> Regards, Arthas >> >>------------------ Original ------------------ >>From: "Arthas";<kangzy1982@qq.com>; >>Date: Wed, Sep 23, 2015 01:17 PM >>To: "dev"<dev@dpdk.org>; >>Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 >> >>Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for >tilegx. >>But I got a error with rte_mbuf rte_pktmbuf_append. >> >>PANIC in rte_mbuf_sanity_check(): >>bad phys addr >>7: [/trafgen(_start+0x70) [0x100b308]] >>6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >>5: [/trafgen(main+0x2148) [0x1017b78]] >>4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >>3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >>2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >>1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] >> >> >>DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! >> >> Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 @ 2015-09-23 5:17 Arthas 2015-09-23 5:20 ` Arthas 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-23 5:17 UTC (permalink / raw) To: dev Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for tilegx. But I got a error with rte_mbuf rte_pktmbuf_append. PANIC in rte_mbuf_sanity_check(): bad phys addr 7: [/trafgen(_start+0x70) [0x100b308]] 6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] 5: [/trafgen(main+0x2148) [0x1017b78]] 4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] 3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] 2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] 1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-23 5:17 Arthas @ 2015-09-23 5:20 ` Arthas 2015-09-23 7:34 ` Tony Lu 0 siblings, 1 reply; 13+ messages in thread From: Arthas @ 2015-09-23 5:20 UTC (permalink / raw) To: dev and I wrote a sample RX example, got an other information. PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. Regards, Arthas ------------------ Original ------------------ From: "Arthas";<kangzy1982@qq.com>; Date: Wed, Sep 23, 2015 01:17 PM To: "dev"<dev@dpdk.org>; Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for tilegx. But I got a error with rte_mbuf rte_pktmbuf_append. PANIC in rte_mbuf_sanity_check(): bad phys addr 7: [/trafgen(_start+0x70) [0x100b308]] 6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] 5: [/trafgen(main+0x2148) [0x1017b78]] 4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] 3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] 2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] 1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 2015-09-23 5:20 ` Arthas @ 2015-09-23 7:34 ` Tony Lu 0 siblings, 0 replies; 13+ messages in thread From: Tony Lu @ 2015-09-23 7:34 UTC (permalink / raw) To: 'Arthas', 'dev' Hi, Arthas Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx? >-----Original Message----- >From: Arthas [mailto:kangzy1982@qq.com] >Sent: Wednesday, September 23, 2015 1:21 PM >To: dev >Cc: zlu >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >and I wrote a sample RX example, got an other information. > > >PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. > > > > Regards, Arthas > >------------------ Original ------------------ >From: "Arthas";<kangzy1982@qq.com>; >Date: Wed, Sep 23, 2015 01:17 PM >To: "dev"<dev@dpdk.org>; >Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for tilegx. >But I got a error with rte_mbuf rte_pktmbuf_append. > >PANIC in rte_mbuf_sanity_check(): >bad phys addr >7: [/trafgen(_start+0x70) [0x100b308]] >6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >5: [/trafgen(main+0x2148) [0x1017b78]] >4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] > > >DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! > > Regards, Arthas ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-09-26 14:52 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-09-24 3:47 [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 Arthas 2015-09-24 5:38 ` Arthas 2015-09-25 4:37 ` Arthas 2015-09-25 14:44 ` Tony Lu 2015-09-26 14:48 ` Arthas 2015-09-26 14:52 ` Arthas -- strict thread matches above, loose matches on Subject: below -- 2015-09-23 10:35 Arthas 2015-09-23 10:41 ` Arthas 2015-09-23 15:55 ` Arthas 2015-09-24 1:47 ` Tony Lu 2015-09-23 5:17 Arthas 2015-09-23 5:20 ` Arthas 2015-09-23 7:34 ` Tony Lu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).