Re: [dts] [PATCH] tests ftag: add get_glortid_bymac function for Boulder Rapid

["Lin, Xueqin" <xueqin.lin@intel.com>]

OK, thanks. Will fix and send patch again.

> -----Original Message-----
> From: Liu, Yong
> Sent: Tuesday, August 16, 2016 9:08 AM
> To: xueqin.lin; dts@dpdk.org
> Cc: Lin, Xueqin
> Subject: RE: [dts][PATCH] tests ftag: add get_glortid_bymac function for
> Boulder Rapid
> 
> Hi Xueqin, one comment.
> 
> > -----Original Message-----
> > From: xueqin.lin [mailto:xlin15@ecsmtp.sh.intel.com]
> > Sent: Monday, August 15, 2016 4:42 PM
> > To: Liu, Yong; dts@dpdk.org
> > Cc: Lin, Xueqin
> > Subject: [dts][PATCH] tests ftag: add get_glortid_bymac function for
> > Boulder Rapid
> >
> > From: Xueqin Lin <xueqin.lin@intel.com>
> >
> > Enable ftag funtion test on Boulder Rapid, need to strip port logic value
> > from mac table
> > then strip port glort ID from stacking information.
> >
> > diff --git a/nics/br.py b/nics/br.py
> > index 5b6e778..0151fbb 100644
> > --- a/nics/br.py
> > +++ b/nics/br.py
> > @@ -29,6 +29,7 @@
> >  # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> >  # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> >
> > +import re
> >  from crb import Crb
> >  from config import PortConf, PORTCONF
> >  from exception import PortConfigParseException
> > @@ -243,3 +244,32 @@ class BoulderRapid(NetDevice):
> >              self.ctrl_crb.send_expect("set port config 1
> > max_frame_size %d" % framesize, "<0>%")
> >          else:
> >              self.ctrl_crb.send_expect("set port config 5
> > max_frame_size %d" % framesize, "<0>%")
> > +
> > +    def get_glortid_bymac(self, dmac):
> > +        out = self.ctrl_crb.send_expect("show mac table all", "<0>%")
> > +        pattern = r"([0-9a-f]{2}:){5}([0-9a-f]{2})"
> > +        s = re.compile(pattern)
> > +        res = s.search(dmac)
> > +        if res is None:
> > +            print "search none mac filter"
> > +            return None
> > +        else:
> > +            mac_filter = res.group(2)
> > +        pattern = r"(?<=%s)+([\sA-Za-z0-9/])+([0-9]{4})" %mac_filter
> > +        s = re.compile(pattern)
> > +        res = s.search(out)
> > +        if res is None:
> > +            print "search none port value"
> > +            return None
> > +        else:
> > +            port_value = res.group(2)
> > +        out = self.ctrl_crb.send_expect("show stacking logical-port all",
> > "<0>%",10000)
> It's impossible to wait some long for expected output. Most of times, we will
> leave it to default value.
> 
> > +        pattern = r"([0-9a-z]{6})+(\s)+(%s)+" %port_value
> > +        s = re.compile(pattern)
> > +        res = s.search(out)
> > +        if res is None:
> > +            print "search none port glort id"
> > +            return None
> > +        else:
> > +            port_glortid = res.group(1)
> > +            return port_glortid
> > --
> > 2.5.5