test suite reviews and discussions
 help / color / mirror / Atom feed
From: Yong Liu <yong.liu@intel.com>
To: dts@dpdk.org
Subject: [dts] [PATCH v2 4/4] suites: remove nic type check from testsuites
Date: Wed,  4 Feb 2015 14:43:34 +0800	[thread overview]
Message-ID: <1423032214-19856-5-git-send-email-yong.liu@intel.com> (raw)
In-Reply-To: <1423032214-19856-1-git-send-email-yong.liu@intel.com>

For all nic in execution file will be used for validation. There's
no need to check nic type in test suites.

Signed-off-by: Marvinliu <yong.liu@intel.com>
---
 tests/TestSuite_blacklist.py        |  2 +-
 tests/TestSuite_checksum_offload.py |  2 +-
 tests/TestSuite_fdir.py             | 16 ++++++++--------
 tests/TestSuite_ieee1588.py         |  6 +++---
 tests/TestSuite_ip_pipeline.py      |  2 +-
 tests/TestSuite_ipfrag.py           |  2 +-
 tests/TestSuite_jumboframes.py      |  2 +-
 tests/TestSuite_l2fwd.py            |  2 +-
 tests/TestSuite_l3fwd.py            |  6 +++---
 tests/TestSuite_link_flowctrl.py    |  2 +-
 tests/TestSuite_multiprocess.py     |  2 +-
 tests/TestSuite_pmd.py              |  4 ++--
 tests/TestSuite_pmd_bonded.py       |  2 +-
 tests/TestSuite_vlan.py             |  3 +--
 tests/TestSuite_whitelist.py        |  2 +-
 15 files changed, 27 insertions(+), 28 deletions(-)

diff --git a/tests/TestSuite_blacklist.py b/tests/TestSuite_blacklist.py
index 65c1ec6..8e9debd 100644
--- a/tests/TestSuite_blacklist.py
+++ b/tests/TestSuite_blacklist.py
@@ -54,7 +54,7 @@ class TestBlacklist(TestCase):
             Two Ports
         """
 
-        self.ports = self.dut.get_ports(self.nic)
+        self.ports = self.dut.get_ports()
         self.verify(len(self.ports) >= 2, "Insufficient ports for testing")
         [arch, machine, self.env, toolchain] = self.target.split('-')
 
diff --git a/tests/TestSuite_checksum_offload.py b/tests/TestSuite_checksum_offload.py
index 1ebac0f..05438b2 100644
--- a/tests/TestSuite_checksum_offload.py
+++ b/tests/TestSuite_checksum_offload.py
@@ -54,7 +54,7 @@ class TestChecksumOffload(TestCase):
         Checksum offload prerequisites.
         """
         # Based on h/w type, choose how many ports to use
-        self.dut_ports = self.dut.get_ports_performance(self.nic)
+        self.dut_ports = self.dut.get_ports_performance()
 
         # Verify that enough ports are available
         self.verify(len(self.dut_ports) >= 2, "Insufficient ports for testing")
diff --git a/tests/TestSuite_fdir.py b/tests/TestSuite_fdir.py
index a9f7fa3..1c8d8f7 100644
--- a/tests/TestSuite_fdir.py
+++ b/tests/TestSuite_fdir.py
@@ -48,7 +48,7 @@ class TestFdir(TestCase):
         """
         Run at the start of each test suite.
         """
-        ports = self.dut.get_ports(self.nic)
+        ports = self.dut.get_ports()
         self.verify(len(ports) >= 2, "Not enough ports available")
 
         self.pmdout = PmdOutput(self.dut)
@@ -81,7 +81,7 @@ class TestFdir(TestCase):
         Setting memory reserved for FDir filters.
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
 
         self.pmdout.start_testpmd("all", "--rxq=2 --txq=2 --disable-rss --pkt-filter-mode=perfect --pkt-filter-size=64K")
         out = self.dut.send_expect("show port fdir %s" % dutPorts[0], "testpmd>")
@@ -111,7 +111,7 @@ class TestFdir(TestCase):
           - Send the ``p_udp`` packet with Scapy on the traffic generator and check that FDir information is printed
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         localPort = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(localPort)
 
@@ -173,7 +173,7 @@ class TestFdir(TestCase):
           - Send the packet and validate the filter function.
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         localPort = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(localPort)
 
@@ -230,7 +230,7 @@ class TestFdir(TestCase):
           - Send the packet and validate the perfect filter function.
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         localPort = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(localPort)
 
@@ -261,7 +261,7 @@ class TestFdir(TestCase):
         fields, or parts of fields are used in the matching process.
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         localPort = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(localPort)
 
@@ -306,7 +306,7 @@ class TestFdir(TestCase):
         to the bytes at offset 36 and 37, as the offset is in 2-byte units
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         localPort = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(localPort)
 
@@ -335,7 +335,7 @@ class TestFdir(TestCase):
         FDir VLAN field filtering
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         localPort = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(localPort)
 
diff --git a/tests/TestSuite_ieee1588.py b/tests/TestSuite_ieee1588.py
index c6fdd61..bf48188 100644
--- a/tests/TestSuite_ieee1588.py
+++ b/tests/TestSuite_ieee1588.py
@@ -52,7 +52,7 @@ class TestIeee1588(TestCase):
         IEEE1588 Prerequisites
         """
 
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         self.verify(len(dutPorts) > 0, "No ports found for " + self.nic)
 
         # Change the config file to support IEEE1588 and recompile the package.
@@ -82,7 +82,7 @@ class TestIeee1588(TestCase):
         time.sleep(1)  # Allow the output from the "start" command to finish before looking for a regexp in expect
 
         # use the first port on that self.nic
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         port = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(port)
 
@@ -125,7 +125,7 @@ class TestIeee1588(TestCase):
         time.sleep(3)
 
         # use the first port on that self.nic
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         port = self.tester.get_local_port(dutPorts[0])
         itf = self.tester.get_interface(port)
 
diff --git a/tests/TestSuite_ip_pipeline.py b/tests/TestSuite_ip_pipeline.py
index 7da393e..46fdc8d 100644
--- a/tests/TestSuite_ip_pipeline.py
+++ b/tests/TestSuite_ip_pipeline.py
@@ -297,7 +297,7 @@ class TestIPPipeline(TestCase):
                              "I217LM": 1,
                              "I218V": 1,
                              "I218LM": 1}
-        self.dut_ports = self.dut.get_ports(self.nic)
+        self.dut_ports = self.dut.get_ports()
         self.verify(len(self.dut_ports) >= self.needed_ports[self.nic],
                     "Insufficient ports for speed testing")
 
diff --git a/tests/TestSuite_ipfrag.py b/tests/TestSuite_ipfrag.py
index 1f08c85..22a24a6 100644
--- a/tests/TestSuite_ipfrag.py
+++ b/tests/TestSuite_ipfrag.py
@@ -81,7 +81,7 @@ class TestIpfrag(TestCase):
         """
 
         # Based on h/w type, choose how many ports to use
-        ports = self.dut.get_ports(self.nic)
+        ports = self.dut.get_ports()
         print ports
 
         # Verify that enough ports are available
diff --git a/tests/TestSuite_jumboframes.py b/tests/TestSuite_jumboframes.py
index 2b862af..83b3427 100644
--- a/tests/TestSuite_jumboframes.py
+++ b/tests/TestSuite_jumboframes.py
@@ -113,7 +113,7 @@ class TestJumboframes(TestCase):
         Prerequisite steps for each test suit.
         """
 
-        self.dut_ports = self.dut.get_ports(self.nic)
+        self.dut_ports = self.dut.get_ports()
         self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
         self.rx_port = self.dut_ports[0]
         self.tx_port = self.dut_ports[1]
diff --git a/tests/TestSuite_l2fwd.py b/tests/TestSuite_l2fwd.py
index b75163c..5c79cbf 100644
--- a/tests/TestSuite_l2fwd.py
+++ b/tests/TestSuite_l2fwd.py
@@ -83,7 +83,7 @@ class TestL2fwd(TestCase):
         self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] + \
             HEADER_SIZE['udp']
 
-        self.dut_ports = self.dut.get_ports_performance(self.nic)
+        self.dut_ports = self.dut.get_ports_performance()
 
         self.verify(len(self.dut_ports) >= self.number_of_ports,
                     "Not enough ports for " + self.nic)
diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
index f590a52..65fa6f7 100644
--- a/tests/TestSuite_l3fwd.py
+++ b/tests/TestSuite_l3fwd.py
@@ -309,9 +309,9 @@ class TestL3fwd(TestCase):
         L3fwd Prerequisites
         """
         # Based on h/w type, choose how many ports to use
-        ports = self.dut.get_ports(self.nic, socket=1)
+        ports = self.dut.get_ports(socket=1)
         if not ports:
-            ports = self.dut.get_ports(self.nic, socket=0)
+            ports = self.dut.get_ports(socket=0)
 
         # Verify that enough ports are available
         self.verify(len(ports) >= 2, "Insufficient ports for speed testing")
@@ -473,7 +473,7 @@ class TestL3fwd(TestCase):
         """
 
         # Based on h/w type, choose how many ports to use
-        ports = self.dut.get_ports(self.nic)
+        ports = self.dut.get_ports()
         # Verify that enough ports are available
         self.verify(len(ports) >= 4, "Insufficient ports for speed testing")
 
diff --git a/tests/TestSuite_link_flowctrl.py b/tests/TestSuite_link_flowctrl.py
index 3c195c9..e52f95a 100644
--- a/tests/TestSuite_link_flowctrl.py
+++ b/tests/TestSuite_link_flowctrl.py
@@ -64,7 +64,7 @@ class TestLinkFlowctrl(TestCase):
         Link flow control Prerequisites
         """
 
-        self.dutPorts = self.dut.get_ports(self.nic)
+        self.dutPorts = self.dut.get_ports()
         self.verify(len(self.dutPorts) > 1, "Insuficient ports")
 
         self.rx_port = self.dutPorts[0]
diff --git a/tests/TestSuite_multiprocess.py b/tests/TestSuite_multiprocess.py
index 2c8eeba..4ef5313 100644
--- a/tests/TestSuite_multiprocess.py
+++ b/tests/TestSuite_multiprocess.py
@@ -191,7 +191,7 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
         """
         self.dut.kill_all()
         self.dut.send_expect("fg", "# ")
-        dutPorts = self.dut.get_ports(self.nic)
+        dutPorts = self.dut.get_ports()
         txPort = self.tester.get_local_port(dutPorts[0])
         rxPort = self.tester.get_local_port(dutPorts[1])
         mac = self.tester.get_mac(txPort)
diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py
index b88352f..c5b7e3b 100644
--- a/tests/TestSuite_pmd.py
+++ b/tests/TestSuite_pmd.py
@@ -108,7 +108,7 @@ class TestPmd(TestCase):
                     "NIC Unsupported: " + str(self.nic))
 
         # Based on h/w type, choose how many ports to use
-        self.dut_ports = self.dut.get_ports(self.nic)
+        self.dut_ports = self.dut.get_ports()
 
         # Verify that enough ports are available
         self.verify(len(self.dut_ports) >= self.needed_ports[self.nic],
@@ -166,7 +166,7 @@ class TestPmd(TestCase):
                 queues = 1
 
             core_mask = dts.create_mask(core_list)
-            port_mask = dts.create_mask(self.dut.get_ports(self.nic))
+            port_mask = dts.create_mask(self.dut.get_ports())
 
             self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
 
diff --git a/tests/TestSuite_pmd_bonded.py b/tests/TestSuite_pmd_bonded.py
index e8e61dd..fd15c1d 100644
--- a/tests/TestSuite_pmd_bonded.py
+++ b/tests/TestSuite_pmd_bonded.py
@@ -792,7 +792,7 @@ UDP(sport=srcport, dport=destport)/Raw(load="\x50"*%s)], iface="%s", count=%d)'
         self.ip_head_size = 20
         self.udp_header_size = 8
 
-        self.dut_ports = self.dut.get_ports(self.nic)
+        self.dut_ports = self.dut.get_ports()
 
         self.port_mask = dts.create_mask(self.dut_ports)
 
diff --git a/tests/TestSuite_vlan.py b/tests/TestSuite_vlan.py
index e9813f3..66dc4f3 100644
--- a/tests/TestSuite_vlan.py
+++ b/tests/TestSuite_vlan.py
@@ -53,12 +53,11 @@ class TestVlan(TestCase):
         """
 
         # Based on h/w type, choose how many ports to use
-        ports = self.dut.get_ports(self.nic)
+        ports = self.dut.get_ports()
 
         # Verify that enough ports are available
         self.verify(len(ports) >= 2, "Insufficient ports")
 
-        ports = self.dut.get_ports(self.nic)
         global valports
         valports = [_ for _ in ports if self.tester.get_local_port(_) != -1]
 
diff --git a/tests/TestSuite_whitelist.py b/tests/TestSuite_whitelist.py
index a32251d..aedae40 100644
--- a/tests/TestSuite_whitelist.py
+++ b/tests/TestSuite_whitelist.py
@@ -55,7 +55,7 @@ class TestWhitelist(TestCase):
         self.frames_to_send = 1
 
         # Based on h/w type, choose how many ports to use
-        self.dutPorts = self.dut.get_ports(self.nic)
+        self.dutPorts = self.dut.get_ports()
 
         # Verify that enough ports are available
         self.verify(len(self.dutPorts) >= 1, "Insufficient ports")
-- 
1.9.3

  parent reply	other threads:[~2015-02-04  6:44 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-04  6:43 [dts] [PATCH v2 0/4] Support additional port configuration file Yong Liu
2015-02-04  6:43 ` [dts] [PATCH v2 1/4] framework: add new module for load " Yong Liu
2015-02-04  6:47   ` Qiu, Michael
2015-02-04  6:43 ` [dts] [PATCH v2 2/4] framework: execuction file support port config nic_type Yong Liu
2015-02-04  7:07   ` Qiu, Michael
2015-02-04  6:43 ` [dts] [PATCH v2 3/4] framework: reorganize DUT and Tester port initialize sequence Yong Liu
2015-02-04  6:59   ` Qiu, Michael
2015-02-04  6:43 ` Yong Liu [this message]
2015-02-04  6:50   ` [dts] [PATCH v2 4/4] suites: remove nic type check from testsuites Qiu, Michael
2015-02-05  1:32 ` [dts] [PATCH v2 0/4] Support additional port configuration file Liu, Yong
2015-02-05  2:18 ` [dts] [PATCH] framework: add port config pci bus id check suites: seperated checksum_offload function and performance port requirements Yong Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1423032214-19856-5-git-send-email-yong.liu@intel.com \
    --to=yong.liu@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).