From: "Jiajia, Sun" <sunx.jiajia@intel.com>
To: dts@dpdk.org
Subject: [dts] [PATCH v2 05/19] Add a module to instantiate the VM
Date: Fri, 22 May 2015 17:03:58 +0800 [thread overview]
Message-ID: <1432285452-14286-6-git-send-email-sunx.jiajia@intel.com> (raw)
In-Reply-To: <1432285452-14286-1-git-send-email-sunx.jiajia@intel.com>
From: sjiajiax <sunx.jiajia@intel.com>
Added module: virt_dut.py
Signed-off-by: sjiajiax <sunx.jiajia@intel.com>
---
framework/virt_dut.py | 202 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 202 insertions(+)
create mode 100644 framework/virt_dut.py
diff --git a/framework/virt_dut.py b/framework/virt_dut.py
new file mode 100644
index 0000000..273b29e
--- /dev/null
+++ b/framework/virt_dut.py
@@ -0,0 +1,202 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import os
+import re
+import time
+import dts
+import settings
+from config import PortConf
+from settings import NICS, LOG_NAME_SEP
+from ssh_connection import SSHConnection
+from project_dpdk import DPDKdut
+from dut import Dut
+from net_device import NetDevice
+from logger import getLogger
+
+
+class VirtDut(DPDKdut):
+
+ """
+ A connection to the CRB under test.
+ This class sends commands to the CRB and validates the responses. It is
+ implemented using either ssh for linuxapp or the terminal server for
+ baremetal.
+ All operations are in fact delegated to an instance of either CRBLinuxApp
+ or CRBBareMetal.
+ """
+
+ def __init__(self, crb, serializer, vm_name, suite):
+ super(Dut, self).__init__(crb, serializer)
+ self.vm_ip = self.get_ip_address()
+ self.NAME = 'virtdut' + LOG_NAME_SEP + '%s' % self.vm_ip
+ # load port config from suite cfg
+ self.suite = suite
+ self.logger = getLogger(self.NAME)
+ self.logger.config_execution('vmdut')
+ self.session = SSHConnection(self.vm_ip, self.NAME,
+ self.get_password())
+ self.session.init_log(self.logger)
+
+ # if redirect ssh port, there's only one session enabled
+ self.alt_session = SSHConnection(self.vm_ip, self.NAME + '_alt',
+ self.get_password())
+ self.alt_session.init_log(self.logger)
+
+ self.number_of_cores = 0
+ self.tester = None
+ self.cores = []
+ self.architecture = None
+ self.ports_info = None
+ self.ports_map = []
+
+ def set_nic_type(self, nic_type):
+ """
+ Set CRB NICS ready to validated.
+ """
+ self.nic_type = nic_type
+ # vm_dut config will load from vm configuration file
+
+ def load_portconf(self):
+ """
+ Load port config for this virtual machine
+ """
+ return
+
+ def set_target(self, target):
+ """
+ Set env variable, these have to be setup all the time. Some tests
+ need to compile example apps by themselves and will fail otherwise.
+ Set hugepage on DUT and install modules required by DPDK.
+ Configure default ixgbe PMD function.
+ """
+ self.set_toolchain(target)
+
+ # set env variable
+ # These have to be setup all the time. Some tests need to compile
+ # example apps by themselves and will fail otherwise.
+ self.send_expect("export RTE_TARGET=" + target, "#")
+ self.send_expect("export RTE_SDK=`pwd`", "#")
+
+ if not self.skip_setup:
+ self.build_install_dpdk(target)
+
+ self.setup_memory(hugepages=512)
+ self.setup_modules(target)
+
+ self.bind_interfaces_linux('igb_uio')
+
+ def prerequisites(self, pkgName, patch):
+ """
+ Prerequest function should be called before execute any test case.
+ Will call function to scan all lcore's information which on DUT.
+ Then call pci scan function to collect nic device information.
+ At last setup DUT' environment for validation.
+ """
+ self.prepare_package(pkgName, patch)
+
+ self.send_expect("cd %s" % self.base_dir, "# ")
+ self.host_session.send_expect("cd %s" % self.base_dir, "# ")
+ self.send_expect("alias ls='ls --color=none'", "#")
+
+ self.init_core_list()
+ self.pci_devices_information()
+
+ # scan ports before restore interface
+ self.scan_ports()
+ # restore dut ports to kernel
+ self.restore_interfaces()
+ # rescan ports after interface up
+ self.rescan_ports()
+
+ # no need to rescan ports for guest os just bootup
+ # load port infor from config file
+ self.load_portconf()
+
+ # enable tester port ipv6
+ self.host_dut.enable_tester_ipv6()
+ self.mount_procfs()
+ # auto detect network topology
+ self.map_available_ports()
+ # disable tester port ipv6
+ self.host_dut.disable_tester_ipv6()
+
+ # print latest ports_info
+ for port_info in self.ports_info:
+ self.logger.info(port_info)
+
+ def pci_devices_information(self):
+ self.pci_devices_information_uncached()
+
+ def get_memory_channels(self):
+ """
+ Virtual machine has no memory channel concept, so always return 1
+ """
+ return 1
+
+ def check_ports_available(self, pci_bus, pci_id):
+ """
+ Check that whether auto scanned ports ready to use
+ """
+ pci_addr = "%s:%s" % (pci_bus, pci_id)
+ if pci_id == "8086:100e":
+ return False
+ return True
+
+ def scan_ports(self):
+ """
+ Scan ports information, for vm will always scan
+ """
+ self.scan_ports_uncached()
+
+ def scan_ports_uncached(self):
+ """
+ Scan ports and collect port's pci id, mac adress, ipv6 address.
+ """
+ scan_ports_uncached = getattr(
+ self, 'scan_ports_uncached_%s' % self.get_os_type())
+ return scan_ports_uncached()
+
+ def map_available_ports(self):
+ """
+ Load or generate network connection mapping list.
+ """
+ self.map_available_ports_uncached()
+ self.logger.warning("DUT PORT MAP: " + str(self.ports_map))
+
+ def send_ping6(self, localPort, ipv6, mac=''):
+ """
+ Send ping6 packet from local port with destination ipv6 address.
+ """
+ if self.ports_info[localPort]['type'] == 'ixia':
+ pass
+ else:
+ return self.send_expect("ping6 -w 1 -c 1 -A -I %s %s" % (self.ports_info[localPort]['intf'], ipv6), "# ", 10)
--
1.9.3
next prev parent reply other threads:[~2015-05-22 9:04 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 9:03 [dts] [PATCH v2 00/19] *** Enable virtualization test for dts framework *** Jiajia, Sun
2015-05-22 9:03 ` [dts] [PATCH v2 01/19] Abstract the NIC device as the single class NetDevice Jiajia, Sun
2015-05-22 9:03 ` [dts] [PATCH v2 02/19] Add a base module for virtual test Jiajia, Sun
2015-05-22 9:03 ` [dts] [PATCH v2 03/19] Add QEMU KVM module based on virt_base module for KVM test cases Jiajia, Sun
2015-05-22 9:03 ` [dts] [PATCH v2 04/19] Add a module to manage the host resource Jiajia, Sun
2015-05-22 9:03 ` Jiajia, Sun [this message]
2015-05-25 6:10 ` [dts] [PATCH v2 05/19] Add a module to instantiate the VM Qiu, Michael
2015-05-25 9:14 ` Jiajia, SunX
2015-05-26 9:07 ` Qiu, Michael
2015-05-27 1:36 ` Jiajia, SunX
2015-05-22 9:03 ` [dts] [PATCH v2 06/19] Add a third-party module of qemu-guest-agent to manage VM Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 07/19] Move some general functions from dts.py to utils.py and settings.py Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 08/19] Add and move some functions because of the virtual tests and network device instantiation Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 09/19] Change and add some functions to support virtual test Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 10/19] add some exceptions to support framwork to handle virtual test exceptions Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 11/19] Add some codes to support virtual test log Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 12/19] Add some codes to make session to support virtual test Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 13/19] Add some base functions to get the device info in the testpmd Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 14/19] Change some codes to support network device instantiation and virtualization test Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 15/19] Add some codes to support network instantiation in the tester module Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 16/19] Make test_case know its suite name Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 17/19] Add a global virtualization config and a config related to SRIOV KVM suite Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 18/19] Add a test plan of how to test SRIOV on the KVM ENV Jiajia, Sun
2015-05-22 9:04 ` [dts] [PATCH v2 19/19] Add a test suite to verify the SRIOV feature " Jiajia, Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432285452-14286-6-git-send-email-sunx.jiajia@intel.com \
--to=sunx.jiajia@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).