From: Jingguo Fu <jingguox.fu@intel.com>
To: dts@dpdk.org
Cc: Jingguo Fu <jingguox.fu@intel.com>
Subject: [dts] [DTS][PATCH 1/2] scatter: add scatter test suite
Date: Thu, 28 May 2015 13:14:36 +0800 [thread overview]
Message-ID: <1432790077-26182-1-git-send-email-jingguox.fu@intel.com> (raw)
Signed-off-by: Jingguo Fu <jingguox.fu@intel.com>
---
tests/TestSuite_scatter.py | 140 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 140 insertions(+)
create mode 100644 tests/TestSuite_scatter.py
diff --git a/tests/TestSuite_scatter.py b/tests/TestSuite_scatter.py
new file mode 100644
index 0000000..643fe4a
--- /dev/null
+++ b/tests/TestSuite_scatter.py
@@ -0,0 +1,140 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Test Scattered Packets.
+"""
+import dts
+from test_case import TestCase
+from pmd_output import PmdOutput
+#
+#
+# Test class.
+#
+class TestScatter(TestCase):
+ #
+ #
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ Scatter Prerequistites
+ """
+ dutPorts = self.dut.get_ports(self.nic)
+ # Verify that enough ports are available
+ self.verify(len(dutPorts) >= 2, "Insufficient ports")
+ self.pmdout = PmdOutput(self.dut)
+
+ def scatter_pktgen_send_packet(self, sPortid, rPortid, pktsize, num=1):
+ """
+ Functional test for scatter packets.
+ """
+ sport = self.tester.get_local_port(sPortid)
+ sintf = self.tester.get_interface(sport)
+ smac = self.dut.get_mac_address(sPortid)
+ rport = self.tester.get_local_port(rPortid)
+ rintf = self.tester.get_interface(rport)
+ if self.nic in ["niantic", "fortville_eagle", "fortville_spirit", "fortville_spirit_single"]:
+ self.tester.send_expect("ifconfig %s mtu 9000" % sintf, "#")
+ self.tester.send_expect("ifconfig %s mtu 9000" % rintf, "#")
+
+ self.tester.scapy_background()
+ self.tester.scapy_append(
+ 'p = sniff(filter="ip",iface="%s", count=%d)' % (rintf, num))
+ self.tester.scapy_append('RESULT = str(p)')
+
+ pktlen = pktsize - 18
+ padding = pktlen - 20
+
+ self.tester.scapy_foreground()
+ self.tester.scapy_append(
+ 'sendp([Ether(dst="%s")/IP(len=%s)/Raw(load="\x50"*%s)], iface="%s")' % (smac, pktlen, padding, sintf))
+ self.tester.scapy_execute()
+ res = self.tester.scapy_get_result()
+ if self.nic in ["niantic", "fortville_eagle", "fortville_spirit", "fortville_spirit_single"]:
+ self.tester.send_expect("ifconfig %s mtu 1500" % sintf, "#")
+ self.tester.send_expect("ifconfig %s mtu 1500" % sintf, "#")
+ return res
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def test_scatter_mbuf_2048(self):
+ """
+ Scatter 2048 mbuf
+ """
+ cores = self.dut.get_core_list('1S/2C/2T')
+ coreMask = dts.create_mask(cores)
+ dutPorts = self.dut.get_ports(self.nic)
+ portMask = dts.create_mask(dutPorts[:2])
+
+ # set the mbuf size to 1024
+ if self.nic in ["niantic", "fortville_eagle", "fortville_spirit", "fortville_spirit_single"]:
+ out = self.pmdout.start_testpmd(
+ "1S/2C/2T", "--mbcache=200 --mbuf-size=2048 --portmask=%s --max-pkt-len=9000" % portMask)
+ else:
+ out = self.pmdout.start_testpmd(
+ "1S/2C/2T", "--mbcache=200 --mbuf-size=1024 --portmask=%s" % portMask)
+ self.verify("Error" not in out, "launch error 1")
+
+ if self.nic in ["niantic", "fortville_eagle", "fortville_spirit", "fortville_spirit_single"]:
+ self.dut.send_expect("set fwd mac", "testpmd> ", 120)
+ self.dut.send_expect("start", "testpmd> ")
+
+ for offset in [-1, 0, 1, 4, 5]:
+ if self.nic in ["niantic", "fortville_eagle", "fortville_spirit", "fortville_spirit_single"]:
+ ret = self.scatter_pktgen_send_packet(
+ dutPorts[0], dutPorts[1], 2048 + offset)
+ else:
+ ret = self.scatter_pktgen_send_packet(
+ dutPorts[0], dutPorts[1], 1024 + offset)
+ self.verify("load='P" in ret, "packet receive error")
+
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("quit", "# ", 30)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ pass
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.1.0
next reply other threads:[~2015-05-28 5:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 5:14 Jingguo Fu [this message]
2015-05-28 5:14 ` [dts] [DTS][PATCH 2/2] scatter: add scatter test plan Jingguo Fu
2015-05-28 5:44 ` [dts] [DTS][PATCH 1/2] scatter: add scatter test suite Xu, HuilongX
2015-06-01 9:16 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432790077-26182-1-git-send-email-jingguox.fu@intel.com \
--to=jingguox.fu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).