From: "huilong,xu" <huilongx.xu@intel.com>
To: dts@dpdk.org
Cc: jingguox.fu@intel.com
Subject: [dts] [dts 3/3] [PATCH V1] add shutdown api test code
Date: Thu, 28 May 2015 15:36:31 +0800 [thread overview]
Message-ID: <1432798591-27164-3-git-send-email-huilongx.xu@intel.com> (raw)
In-Reply-To: <1432798591-27164-1-git-send-email-huilongx.xu@intel.com>
From: huilong xu <huilongx.xu@intel.com>
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
tests/TestSuite_shutdown_api.py | 488 +++++++++++++++++++++++++++++++++++++++
1 files changed, 488 insertions(+), 0 deletions(-)
create mode 100644 tests/TestSuite_shutdown_api.py
diff --git a/tests/TestSuite_shutdown_api.py b/tests/TestSuite_shutdown_api.py
new file mode 100644
index 0000000..fd38ae8
--- /dev/null
+++ b/tests/TestSuite_shutdown_api.py
@@ -0,0 +1,488 @@
+# <COPYRIGHT_TAG>
+
+"""
+DPDK Test suite.
+
+Test Shutdown API Feature
+
+"""
+
+import dts
+import time
+import re
+import os
+from test_case import TestCase
+from pmd_output import PmdOutput
+from setting import HEADER_SIZE
+
+#
+#
+# Test class.
+#
+
+
+class TestShutdownApi(TestCase):
+
+ #
+ #
+ #
+ # Test cases.
+ #
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.ports = self.dut.get_ports()
+ print self.nic, self.ports
+ self.verify(len(self.ports) >= 2, "Insufficient number of ports.")
+ self.ports_socket = self.dut.get_numa_id(self.ports[0])
+
+ for port in self.ports:
+ self.tester.send_expect("ifconfig %s mtu %s" % (
+ self.tester.get_interface(self.tester.get_local_port(port)), 5000), "# ")
+
+ self.pmdout = PmdOutput(self.dut)
+
+ def get_stats(self, portid):
+ """
+ Get packets number from port statistic.
+ """
+ output = PmdOutput(self.dut)
+ stats = output.get_pmd_stats(portid)
+ return stats
+
+ def check_forwarding(self, ports, nic, testerports=[None, None], pktSize=64, received=True, crcStrip=False, vlan=False):
+ for i in range(len(ports)):
+ if i % 2 == 0:
+ self.send_packet(ports[i], ports[i + 1], self.nic, testerports[1], pktSize, received, crcStrip=crcStrip, vlan=vlan)
+ self.send_packet(ports[i + 1], ports[i], self.nic, testerports[0], pktSize, received, crcStrip=crcStrip, vlan=vlan)
+
+ def send_packet(self, txPort, rxPort, nic, testerports=None, pktSize=64, received=True, crcStrip=False, vlan=False):
+ """
+ Send packages according to parameters.
+ """
+ port0_stats = self.get_stats(txPort)
+ gp0tx_pkts, gp0tx_bytes = [port0_stats['TX-packets'], port0_stats['TX-bytes']]
+ port1_stats = self.get_stats(rxPort)
+ gp1rx_pkts, gp1rx_err, gp1rx_bytes = [port1_stats['RX-packets'], port1_stats['RX-errors'], port1_stats['RX-bytes']]
+ time.sleep(5)
+
+ if testerports is None:
+ itf = self.tester.get_interface(self.tester.get_local_port(rxPort))
+ else:
+ itf = testerports
+ mac = self.dut.get_mac_address(txPort)
+
+ self.tester.scapy_foreground()
+ if self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "bartonhills",
+ "powerville", "springville", "hartwell"]:
+ pktlen = pktSize - HEADER_SIZE['eth'] -4
+ else:
+ pktlen = pktSize - HEADER_SIZE['eth']
+ padding = pktlen - HEADER_SIZE['ip']
+
+ if vlan:
+ self.tester.scapy_append('sendp([Ether(dst="%s")/Dot1Q(vlan=1)/IP()/Raw(load="\x50"*%s)], iface="%s")' % (mac, padding, itf))
+ else:
+ self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/Raw(load="\x50"*%s)], iface="%s")' % (mac, padding, itf))
+
+ self.tester.scapy_execute()
+ time.sleep(3)
+
+ port0_stats = self.get_stats(txPort)
+ p0tx_pkts, p0tx_bytes = [port0_stats['TX-packets'], port0_stats['TX-bytes']]
+ port1_stats = self.get_stats(rxPort)
+ p1rx_pkts, p1rx_err, p1rx_bytes = [port1_stats['RX-packets'], port1_stats['RX-errors'], port1_stats['RX-bytes']]
+ time.sleep(5)
+
+ p0tx_pkts -= gp0tx_pkts
+ p0tx_bytes -= gp0tx_bytes
+ p1rx_pkts -= gp1rx_pkts
+ p1rx_bytes -= gp1rx_bytes
+ p1rx_err -= gp1rx_err
+ if received:
+
+ if vlan:
+ self.verify(p0tx_pkts == p1rx_pkts,
+ "Wrong TX pkts p0_tx=%d, p1_rx=%d" % (p0tx_pkts, p1rx_pkts))
+ else:
+ if self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "bartonhills",
+ "powerville", "springville", "hartwell"]:
+
+ self.verify(p0tx_bytes == pktSize,
+ "Wrong TX bytes p0_tx=%d, pktSize=%d" % (p0tx_bytes, pktSize))
+ else:
+ self.verify(p0tx_bytes == pktSize,
+ "Wrong TX bytes p0_tx=%d, pktSize=%d" % (p0tx_bytes, pktSize))
+ if crcStrip:
+ if self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "bartonhills",
+ "powerville", "springville", "hartwell"]:
+ self.verify(p1rx_bytes - 4 == pktSize,
+ "Wrong RX bytes CRC strip: p1_rx=%d, pktSize=%d" % (p1rx_bytes, pktSize))
+ else:
+ self.verify(p1rx_bytes == pktSize - 4,
+ "Wrong RX bytes CRC strip: p1_rx=%d, pktSize=%d" % (p1rx_bytes, pktSize))
+ else:
+ if vlan:
+ if self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "bartonhills",
+ "powerville", "springville", "hartwell"]:
+ self.verify(p1rx_bytes == pktSize,
+ "Wrong RX bytes No CRC strip: p1_rx=%d, pktSize=%d" % (p1rx_bytes, pktSize))
+ else:
+ self.verify(p1rx_bytes == pktSize + 4,
+ "Wrong RX bytes No CRC strip: p1_rx=%d, pktSize=%d" % (p1rx_bytes, pktSize))
+ else:
+ self.verify(p1rx_bytes == pktSize,
+ "Wrong RX bytes No CRC strip: p1_rx=%d, pktSize=%d" % (p1rx_bytes, pktSize))
+ else:
+ self.verify(
+ p0tx_pkts == 0, "Packet not dropped p0tx_pkts=%d" % p0tx_pkts)
+ self.verify(
+ p0tx_bytes == 0, "Packet not dropped p0tx_bytes=%d" % p0tx_bytes)
+
+ def check_ports(self, ports, status):
+ """
+ Check link status of the ports.
+ """
+ for port in ports:
+ out = self.tester.send_expect(
+ "ethtool %s" % self.tester.get_interface(self.tester.get_local_port(port)), "# ")
+ if status:
+ self.verify("Link detected: yes" in out, "Wrong link status")
+ else:
+ self.verify("Link detected: no" in out, "Wrong link status")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def test_stop_restart(self):
+ """
+ Stop and Restar.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+ self.dut.send_expect("stop", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic, received=False)
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.check_ports(self.ports, False)
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.check_ports(self.ports, True)
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+
+ def test_set_promiscuousmode(self):
+ """
+ Promiscuous mode.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask([self.ports[0], self.ports[1]]), self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("set promisc all off", "testpmd> ")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+
+ try:
+ self.check_forwarding([self.ports[0], self.ports[1]], self.nic)
+ except dts.VerifyFailure as e:
+ print 'promiscuous mode is working correctly'
+ except Exception as e:
+ print " !!! DEBUG IT: " + e.message
+ return "FAIL"
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("set promisc all on", "testpmd> ")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding([self.ports[0], self.ports[1]], self.nic)
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("set promisc all off", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect("quit", "# ", 30)
+
+ def test_reset_queues(self):
+ """
+ Reset RX/TX Queues.
+ """
+ testerports = [self.tester.get_interface(self.tester.get_local_port(self.ports[0])),
+ self.tester.get_interface(self.tester.get_local_port(self.ports[1]))
+ ]
+ #blackList = self.dut.create_blacklist_string(self.target, self.nic)
+
+ self.pmdout.start_testpmd("1S/8C/1T", "--portmask=%s" % dts.create_mask([self.ports[0], self.ports[1]]), socket=self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config all rxq 2", "testpmd> ")
+ self.dut.send_expect("port config all txq 2", "testpmd> ")
+ #self.dut.send_expect("set coremask 0x1e", "testpmd> ")
+ self.dut.send_expect("set coremask 0xe0", "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ out = self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.verify("RX queues=2" in out, "RX queues not reconfigured properly")
+ self.verify("TX queues=2" in out, "TX queues not reconfigured properly")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding([0, 1], self.nic, testerports)
+ self.dut.send_expect("quit", "# ", 30)
+ #self.dut.send_expect("rmmod igb_uio", "# ", 20)
+ #self.dut.send_expect("insmod ./%s/kmod/igb_uio.ko" % self.target, "#")
+ #self.dut.bind_interfaces_linux()
+
+ def test_reconfigure_ports(self):
+ """
+ Reconfigure All Ports With The Same Configurations (CRC)
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config all crc-strip on", "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ out = self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.verify(
+ "CRC stripping enabled" in out, "CRC stripping not enabled properly")
+ self.dut.send_expect("start", "testpmd> ")
+ if self.nic in ["fortville_eagle", "fortville_spirit", "fortville_spirit_single"]:
+ self.check_forwarding(self.ports, self.nic, crcStrip=False)
+ else:
+ self.check_forwarding(self.ports, self.nic, crcStrip=True)
+
+
+ def test_change_linkspeed(self):
+ """
+ Change Link Speed.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ out = self.tester.send_expect(
+ "ethtool %s" % self.tester.get_interface(self.tester.get_local_port(self.ports[0])), "# ")
+ if 'fortville_spirit' == self.nic:
+ result_scanner = r"([0-9]+)baseSR4/([A-Za-z]+)"
+ else:
+ result_scanner = r"([0-9]+)baseT/([A-Za-z]+)"
+ scanner = re.compile(result_scanner, re.DOTALL)
+ m = scanner.findall(out)
+ configs = m[:-(len(m) / 2)]
+ for config in configs:
+ print config
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ for port in self.ports:
+ self.dut.send_expect("port config %d speed %s duplex %s" % (port,
+ config[0], config[1].lower()), "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ time.sleep(5) # sleep few seconds for link stable
+
+ for port in self.ports:
+ out = self.tester.send_expect(
+ "ethtool %s" % self.tester.get_interface(self.tester.get_local_port(port)), "# ")
+ self.verify("Speed: %s" % config[0] in out,
+ "Wrong speed reported by the self.tester.")
+ self.verify("Duplex: %s" % config[1] in out,
+ "Wrong link type reported by the self.tester.")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+ self.dut.send_expect("stop", "testpmd> ")
+
+ def failed_test_enable_disablejumbo(self):
+ """
+ Enable/Disable Jumbo Frames.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("vlan set strip off all", "testpmd> ")
+ self.dut.send_expect("port config all max-pkt-len 2048", "testpmd> ")
+ for port in self.ports:
+ self.dut.send_expect("rx_vlan add 1 %d" % port, "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.dut.send_expect("start", "testpmd> ")
+
+ self.check_forwarding(self.ports, self.nic, pktSize=2047, vlan=True)
+ self.check_forwarding(self.ports, self.nic, pktSize=2048, vlan=True)
+ self.check_forwarding(self.ports, self.nic, pktSize=2049, received=False, vlan=True)
+
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config all hw-vlan off", "testpmd> ")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.dut.send_expect("start", "testpmd> ")
+ if ((self.nic == "bartonhills") or (self.nic == "powerville") or (self.nic == "springville") or (self.nic == "hartwell")):
+ self.check_forwarding(self.ports, self.nic, pktSize=2051)
+ self.check_forwarding(self.ports, self.nic, pktSize=2052)
+ self.check_forwarding(self.ports, self.nic, pktSize=2053, received=False)
+ else:
+ self.check_forwarding(self.ports, self.nic, pktSize=2047)
+ self.check_forwarding(self.ports, self.nic, pktSize=2048)
+ self.check_forwarding(self.ports, self.nic, pktSize=2049, received=False)
+
+ def test_enable_disablerss(self):
+ """
+ Enable/Disable RSS.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config rss ip", "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+
+ def test_change_numberrxdtxd(self):
+ """
+ Enable/Disable Jumbo Frame.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config all rxd 1024", "testpmd> ")
+ self.dut.send_expect("port config all txd 1024", "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ out = self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.verify(
+ "RX desc=1024" in out, "RX descriptor not reconfigured properly")
+ self.verify(
+ "TX desc=1024" in out, "TX descriptor not reconfigured properly")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+
+ def test_change_numberrxdtxdaftercycle(self):
+ """
+ Change the Number of rxd/txd.
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config all rxd 1024", "testpmd> ")
+ self.dut.send_expect("port config all txd 1024", "testpmd> ")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ out = self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.verify(
+ "RX desc=1024" in out, "RX descriptor not reconfigured properly")
+ self.verify(
+ "TX desc=1024" in out, "TX descriptor not reconfigured properly")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ out = self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.verify(
+ "RX desc=1024" in out, "RX descriptor not reconfigured properly")
+ self.verify(
+ "TX desc=1024" in out, "TX descriptor not reconfigured properly")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+
+ def test_change_thresholds(self):
+ """
+ Change RX/TX thresholds
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("port config all txfreet 32", "testpmd> ")
+ self.dut.send_expect("port config all txrst 32", "testpmd> ")
+ self.dut.send_expect("port config all rxfreet 32", "testpmd> ")
+ self.dut.send_expect("port config all txpt 64", "testpmd> ")
+ self.dut.send_expect("port config all txht 64", "testpmd> ")
+ self.dut.send_expect("port config all txwt 0", "testpmd> ")
+ self.dut.send_expect("port config all rxpt 64", "testpmd> ")
+ self.dut.send_expect("port config all rxht 64", "testpmd> ")
+ self.dut.send_expect("port config all rxwt 64", "testpmd> ")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ out = self.dut.send_expect("show config rxtx", "testpmd> ")
+ self.verify("RX free threshold=32" in out,
+ "RX descriptor not reconfigured properly")
+ self.verify("TX free threshold=32" in out,
+ "TX descriptor not reconfigured properly")
+ self.verify("TX RS bit threshold=32" in out,
+ "TX descriptor not reconfigured properly")
+ self.verify("pthresh=64" in out, "TX descriptor not reconfigured properly")
+ self.verify("hthresh=64" in out, "TX descriptor not reconfigured properly")
+ self.verify("wthresh=64" in out, "TX descriptor not reconfigured properly")
+ self.verify("pthresh=64" in out, "TX descriptor not reconfigured properly")
+ self.verify("hthresh=64" in out, "TX descriptor not reconfigured properly")
+ self.verify("wthresh=64" in out, "TX descriptor not reconfigured properly")
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+
+ def test_stress_test(self):
+ """
+ Start/stop stress test.
+ """
+ stress_iterations = 10
+
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+
+ self.tester.scapy_append('wrpcap("test.pcap", [Ether()/IP()/UDP()/()])')
+ tgenInput = []
+
+ for port in self.ports:
+ tgenInput.append((self.tester.get_local_port(
+ port), self.tester.get_local_port(port), "test.pcap"))
+
+ for _ in range(stress_iterations):
+ self.dut.send_expect("port stop all", "testpmd> ", 100)
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("port start all", "testpmd> ", 100)
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_forwarding(self.ports, self.nic)
+ self.dut.send_expect("stop", "testpmd> ")
+
+ self.dut.send_expect("quit", "# ")
+
+ def test_link_stats(self):
+ """
+ port link stats test
+ """
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % dts.create_mask(self.ports), socket=self.ports_socket)
+ self.dut.send_expect("set fwd mac", "testpmd>")
+ self.dut.send_expect("start", "testpmd>")
+
+ # default test
+ # self.check_forwarding([0,1], self.nic)
+
+ ports_num = len(self.ports)
+ # link down test
+ for i in range(ports_num):
+ self.dut.send_expect("set link-down port %d" % i, "testpmd>")
+ # leep few seconds for NIC link status update
+ time.sleep(5)
+ self.check_ports(self.ports, False)
+
+ # link up test
+ for j in range(ports_num):
+ self.dut.send_expect("set link-up port %d" % j, "testpmd>")
+ time.sleep(5)
+ self.check_ports(self.ports, True)
+ self.check_forwarding(self.ports, self.nic)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
1.7.4.4
prev parent reply other threads:[~2015-05-28 7:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 7:36 [dts] [dts 1/3] [PATCH V1] add shutdown api test for niantic and fvl huilong,xu
2015-05-28 7:36 ` [dts] [dts 2/3] [PATCH V1] add shutdown api test plan huilong,xu
2015-05-28 8:43 ` Fu, JingguoX
2015-05-28 7:36 ` huilong,xu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432798591-27164-3-git-send-email-huilongx.xu@intel.com \
--to=huilongx.xu@intel.com \
--cc=dts@dpdk.org \
--cc=jingguox.fu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).