test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [DTS][PATCH 1/2] pmd rss hash: add test plan
@ 2015-05-29  1:51 Jingguo Fu
  2015-05-29  1:51 ` [dts] [DTS][PATCH 2/2] pmd rss hash: add test suite Jingguo Fu
  2015-06-01  9:20 ` [dts] [DTS][PATCH 1/2] pmd rss hash: add test plan Liu, Yong
  0 siblings, 2 replies; 3+ messages in thread
From: Jingguo Fu @ 2015-05-29  1:51 UTC (permalink / raw)
  To: dts; +Cc: Jingguo Fu

Signed-off-by: Jingguo Fu <jingguox.fu@intel.com>
---
 test_plans/pmdrss_hash_test_plan.rst | 152 +++++++++++++++++++++++++++++++++++
 1 file changed, 152 insertions(+)
 create mode 100644 test_plans/pmdrss_hash_test_plan.rst

diff --git a/test_plans/pmdrss_hash_test_plan.rst b/test_plans/pmdrss_hash_test_plan.rst
new file mode 100644
index 0000000..4922d3b
--- /dev/null
+++ b/test_plans/pmdrss_hash_test_plan.rst
@@ -0,0 +1,152 @@
+.. Copyright (c) <2011>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==================================================================
+Fortville RSS full support - Support configuring hash functions
+==================================================================
+
+This document provides test plan for testing the function of Fortville:
+Support configuring hash functions.
+
+Prerequisites
+-------------
+
+2x Intel® 82599 (Niantic) NICs (2x 10GbE full duplex optical ports per NIC)
+1x Fortville_eagle NIC (4x 10G)
+1x Fortville_spirit NIC (2x 40G) 
+2x Fortville_spirit_single NIC (1x 40G)
+
+The four ports of the 82599 connect to the Fortville_eagle;
+The two ports of Fortville_spirit connect to Fortville_spirit_single.
+The three kinds of NICs are the target NICs. the connected NICs can send packets
+to these three NICs using scapy.
+
+Network Traffic
+---------------
+
+The RSS feature is designed to improve networking performance by load balancing
+the packets received from a NIC port to multiple NIC RX queues, with each queue
+handled by a different logical core.
+
+#1. The receive packet is parsed into the header fields used by the hash
+operation (such as IP addresses, TCP port, etc.)
+
+#2. A hash calculation is performed. The Fortville  supports four hash function:
+Toeplitz, simple XOR and their Symmetric RSS.
+
+#3. The seven LSBs of the hash result are used as an index into a 128/512 entry
+'redirection table'. Each entry provides a 4-bit RSS output index.
+
+#4. There are four cases to test the four hash function.
+
+Test Case:  test_toeplitz
+=========================
+
+Testpmd configuration - 16 RX/TX queues per port
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+#1. set up testpmd woth fortville NICs::
+  
+  ./testpmd -c fffff -n %d -- -i --coremask=0xffffe --rxq=16 --txq=16
+
+#2. Reta Configuration.  128 reta entries configuration::
+
+  testpmd command: port config 0 rss reta (hash_index,queue_id)
+
+#3. PMD fwd only receive the packets::
+
+  testpmd command: set fwd rxonly
+
+#4. rss recived package type configuration two received packet types configuration::
+
+  testpmd command: port config 0 rss ip/udp
+
+#5. verbose configuration::
+
+  testpmd command: set verbose 8
+
+#6. set hash functions, can choose symmetric or not, chosse port and packet type::
+
+  set_hash_function 0 toeplitz
+
+#7. start packet receive::
+
+  testpmd command: start
+
+tester Configuration
+--------------------
+
+#1. set up scapy
+
+#2. send packets with different type ipv4/ipv4 with tcp/ipv4 with udp/
+    ipv6/ipv6 with tcp/ipv6 with udp::
+
+    sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.4", dst="192.168.0.5")], iface="eth3")
+
+test result
+-----------
+
+The testpmd will print the hash value and actual queue of every packet.
+
+#1. Calaute the queue id: hash value%128or512, then refer to teh redirection table
+    to get the theoretical queue id.
+
+#2. Compare the theoretical queue id with the actual queue id.
+
+
+Test Case:  test_toeplitz_symmetric
+===================================
+
+The same with the above steps, pay attention to "set hash function", should use::
+
+  set_hash_function 0 toeplitz
+  set_sym_hash_ena_per_port 0 enable
+  set_sym_hash_ena_per_pctype 0 35 enable
+
+And send packets with the same flow in different direction::
+
+  sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.4", dst="192.168.0.5")], iface="eth3")
+  sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.5", dst="192.168.0.4")], iface="eth3")
+
+And the hash value and queue should be the same for these two flow .
+
+Test Case:  test_simple
+=======================
+
+The same as the above two test cases. Just pay attention to set the hash function to "simple xor"
+
+Test Case:  test_simple_symmetric
+=================================
+
+The same as the above two test cases. Just pay attention to set the hash function to "simple xor"
+
+
-- 
2.1.0

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2015-06-01  9:20 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-29  1:51 [dts] [DTS][PATCH 1/2] pmd rss hash: add test plan Jingguo Fu
2015-05-29  1:51 ` [dts] [DTS][PATCH 2/2] pmd rss hash: add test suite Jingguo Fu
2015-06-01  9:20 ` [dts] [DTS][PATCH 1/2] pmd rss hash: add test plan Liu, Yong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).