From: "huilong,xu" <huilongx.xu@intel.com>
To: dts@dpdk.org
Subject: [dts] [PATCH V1 2/4] add nvgre test plan
Date: Thu, 4 Jun 2015 14:03:59 +0800 [thread overview]
Message-ID: <1433397841-1704-2-git-send-email-huilongx.xu@intel.com> (raw)
In-Reply-To: <1433397841-1704-1-git-send-email-huilongx.xu@intel.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 25309 bytes --]
From: huilong xu <huilongx.xu@intel.com>
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
test_plans/nvgre_test_plan.rst | 389 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 389 insertions(+), 0 deletions(-)
create mode 100644 test_plans/nvgre_test_plan.rst
diff --git a/test_plans/nvgre_test_plan.rst b/test_plans/nvgre_test_plan.rst
new file mode 100644
index 0000000..50993c1
--- /dev/null
+++ b/test_plans/nvgre_test_plan.rst
@@ -0,0 +1,389 @@
+.. Copyright (c) <2015>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPR ESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+================
+ Fortville NVGRE
+================
+Cloud providers build virtual network overlays over existing network
+infrastructure that provide tenant isolation and scaling. Tunneling
+layers added to the packets carry the virtual networking frames over
+existing Layer 2 and IP networks. Conceptually, this is similar to
+creating virtual private networks over the Internet. Fortville will
+process these tunneling layers by the hardware.
+
+This document provides test plan for Fortville NVGRE packet detecting,
+checksum computing and filtering.
+
+Prerequisites
+=============
+1x Intel® X710 (Fortville) NICs (2x 40GbE full duplex optical ports per NIC)
+plugged into the available PCIe Gen3 8-lane slot.
+
+1x Intel® XL710-DA4 (Eagle Fountain) (1x 10GbE full duplex optical ports per NIC)
+plugged into the avaiable PCIe Gen3 8-lane slot.
+
+DUT board must be two sockets system and each cpu have more than 8 lcores.
+
+Test Case: NVGRE ipv4 packet detect
+===================================
+Start testpmd with tunneling packet type to NVGRE::
+
+ testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Send packet as table listed and check dumped packet type the same as column
+"Rx packet type".
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | None | None | None | None | None | PKT_RX_IPV4_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Tcp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Sctp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | Yes | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+
+
+Test Case: NVGRE ipv6 packet detect
+===================================
+Start testpmd with tunneling packet type to NVGRE::
+
+ testpmd -c 0xffff -n 2 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Send ipv6 packet as table listed and check dumped packet type the same as
+column "Rx packet type".
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | None | None | None | None | None | PKT_RX_IPV6_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Tcp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Sctp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | Yes | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Test Case: NVGRE IPv4 Filter
+========================
+This test adds NVGRE IPv4 filters to the hardware, and then checks whether
+sent packets match those filters. In order to this, the packet should first
+be sent from ``Scapy`` before the filter is created, to verify that it is not
+matched by a NVGRE IPv4 filter. The filter is then added from the ``testpmd``
+command line and the packet is sent again.
+
+Start testpmd::
+
+ testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Add one new NVGRE filter as table listed first::
+ tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan
+ tunnel_type(vxlan|nvgre) filter_type(imac-ivlan|imac-ivlan-tenid|imac-tenid|imac
+ |omac-imac-tenid|iip) tenant_id queue_num
+
+For example:
+ tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01 192.168.2.2 1
+ NVGRE imac 1 1
+
+Then send one packet and check packet was forwarded into right queue.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | None | None | None | None | None | PKT_RX_IPV4_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Tcp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Sctp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | Yes | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Remove NVGRE filter which has been added. Then send one packet and check
+packet was received in queue 0.
+
+
+Test Case: NVGRE IPv4 Filter invalid
+========================
+This test adds NVGRE IPv6 filters by invalid command, and then checks command
+result.
+
+Start testpmd::
+
+ testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Add NVGRE filter as table listed first::
+ tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan
+ tunnel_type(vxlan|nvgre) filter_type(imac-ivlan|imac-ivlan-tenid|imac-tenid|imac
+ |omac-imac-tenid|iip) tenant_id queue_num
+
+Validte the filter command with wrong parameter::
+
+Add Clould filter with invalid Mac address "00:00:00:00:01" will be failed.
+
+Add Clould filter with invalid ip address "192.168.1.256" will be failed.
+
+Add Clould filter with invalid vlan "4097" will be failed.
+
+Add Clould filter with invalid vni "16777216" will be failed.
+
+Add Clould filter with invalid queue id "64" will be failed.
+
+Test Case: NVGRE IPv6 Filter
+========================
+This test adds NVGRE IPv6 filters to the hardware, and then checks whether
+sent packets match those filters. In order to this, the packet should first
+be sent from ``Scapy`` before the filter is created, to verify that it is not
+matched by a NVGRE IPv6 filter. The filter is then added from the ``testpmd``
+command line and the packet is sent again.
+
+Start testpmd::
+
+ testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Add NVGRE filter as table listed first::
+ tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan
+ tunnel_type(vxlan|nvgre) filter_type(imac-ivlan|imac-ivlan-tenid|imac-tenid|imac
+ |omac-imac-tenid|iip) tenant_id queue_num
+
+For example:
+ tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01 192.168.2.2 1
+ NVGRE imac 1 1
+
+Then send one packet and check packet was forwarded into right queue.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | None | None | None | None | None | PKT_RX_IPV6_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Tcp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Sctp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | Yes | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Remove NVGRE filter which has been added. Then send one packet and check
+packet was received in queue 0.
+
+Test Case: NVGRE ipv4 checksum offload
+======================================
+This test validates NVGRE IPv4 checksum by the hardware. In order to this, the packet should first
+be sent from ``Scapy`` with wrong checksum(0x00) value. Then the pmd forward package while checksum
+is modified on DUT tx port by hardware. To verify it, tcpdump captures the
+forwarded packet and checks the forwarded packet checksum correct or not.
+
+Start testpmd with tunneling packet type to NVGRE::
+
+ testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
+
+Set csum packet forwarding mode and enable verbose log::
+
+ set fwd csum
+ tx_checksum set ip hw <dut tx_port>
+ tx_checksum set udp hw <dut tx_port>
+ tx_checksum set tcp hw <dut tx_port>
+ tx_checksum set sctp hw <dut tx_port>
+ tx_checksum set nvgre hw <dut tx_port>
+ set verbose 1
+
+Send packet with invalid checksum first. Then check forwarded packet checksum
+correct or not.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | None | None | None | None | None | PKT_RX_IPV4_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4(Bad)| Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4(Bad)| Tcp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4(Bad)| Yes | Yes | None | Ipv4(Bad)| Sctp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4(Bad)| Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | Yes | Ipv4(Bad)| Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Test Case: NVGRE ipv6 checksum offload
+======================================
+This test validates NVGRE IPv6 checksum by the hardware. In order to this, the packet should first
+be sent from ``Scapy`` with wrong checksum(0x00) value. Then the pmd forward package while checksum
+is modified on DUT tx port by hardware. To verify it, tcpdump captures the
+forwarded packet and checks the forwarded packet checksum correct or not.
+
+Start testpmd with tunneling packet type::
+
+ testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
+
+Set csum packet forwarding mode and enable verbose log::
+
+ set fwd csum
+ tx_checksum set ip hw <dut tx_port>
+ tx_checksum set udp hw <dut tx_port>
+ tx_checksum set tcp hw <dut tx_port>
+ tx_checksum set sctp hw <dut tx_port>
+ tx_checksum set nvgre hw <dut tx_port>
+ set verbose 1
+
+Send packet with invalid checksum first. Then check forwarded packet checksum
+correct or not.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | None | None | None | None | None | PKT_RX_IPV6_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6(Bad)| Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6(Bad)| Tcp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6(Bad)| Yes | Yes | None | Ipv6(Bad)| Sctp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6(Bad)| Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | Yes | Ipv6(Bad)| Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+
+
+Test Case: NVGRE Checksum Offload Performance Benchmarking
+==========================================================
+
+The throughput is measured for each of these cases for NVGRE tx checksum
+offload of "all by software", "inner l3 offload by hardware", "inner l4
+offload by hardware", "inner l3&l4 offload by hardware", "outer l3 offload
+by hardware", "outer l4 offload by hardware", "outer l3&l4 offload by
+hardware", "all by hardware".
+
+The results are printed in the following table:
+
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| Calculate Type | 1S/1C/1T Mpps | % linerate | 1S/1C/2T Mpps | % linerate | 1S/2C/1T Mpps | % linerate |
++================+===============+============+===============+============+===============+============+
+| SOFTWARE ALL | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW OUTER L3 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW OUTER L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW OUTER L3&L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW INNER L3 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW INNER L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW INNER L3&L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HARDWARE ALL | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+
+Test Case: NVGRE Tunnel filter Performance Benchmarking
+=======================================================
+The throughput is measured for different NVGRE tunnel filter types.
+Queue single mean there's only one flow and forwarded to the first queue.
+Queue multi mean there're two flows and configure to different queues.
+
++--------+------------------+--------+--------+------------+
+| Packet | Filter | Queue | Mpps | % linerate |
++========+==================+========+========+============+
+| Normal | None | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | None | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan-tenid | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-tenid | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | omac-imac-tenid | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan-tenid | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-tenid | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | omac-imac-tenid | Multi | | |
++--------+------------------+--------+--------+------------+
--
1.7.4.4
next prev parent reply other threads:[~2015-06-04 6:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 6:03 [dts] [PATCH V1 1/4] add nvgre test for fortville NIC huilong,xu
2015-06-04 6:03 ` huilong,xu [this message]
2015-06-09 6:42 ` [dts] [PATCH V1 2/4] add nvgre test plan Liu, Yong
2015-06-04 6:04 ` [dts] [PATCH V1 3/4] add nvgre protocol for scapy huilong,xu
2015-06-04 6:04 ` [dts] [PATCH V1 4/4] add nvgre test code huilong,xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433397841-1704-2-git-send-email-huilongx.xu@intel.com \
--to=huilongx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).