* [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case
@ 2015-07-13 6:59 Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 1/5] add vhost-cuse implementations for virtio pci device Qian Xu
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Qian Xu @ 2015-07-13 6:59 UTC (permalink / raw)
To: dts
This patchset will enable vhost-user and vhost-cuse sample one-vm performance ca ses based on the virtualization framework. The vhost-user's implementation is ba sed on vhost user socket, while the vhost-cuse is via IOCTL messages.
The patchset includes below things:
1. Vhost-user sample automation has 4 cases: one VM with dpdk fwd, one VM with d pdk fwd with jumboframe enabled, one VM with legacy fwd, one VM with legacy fwd with jumboframe enabled.
2. Vhost-cuse sample automation has similar 4 cases as above.
3. The required qemu version fo vhost-user is >=qemu2.2
4. The one-vm has 2 virtio, and the vhost has binded to one physical port.
5. update qemu_kvm.py to support vhost-cuse.
6. vhost_cuse_sample.cfg and vhost_sample.cfg are the config file for references .
v2 changes:
1. Remove unnecessary codes and debug codes.
2. use pep8 to align the codes format.
3. minor update about the core numbers of vhost usage. Set 1S/3C/1T as default core setting for vhost to get best perf.
4. change the vm core numbers to 2cores in the config files.
Qian Xu (5):
add vhost-cuse implementations for virtio pci device
add vhost-cuse sample config file for reference
add vhost-user sample config file for reference
add vhost-cuse one vm sample
add vhost-user one vm sample test
conf/vhost_cuse_sample.cfg | 14 ++
conf/vhost_sample.cfg | 14 ++
framework/qemu_kvm.py | 22 +-
tests/TestSuite_vhost_cuse_sample.py | 455 +++++++++++++++++++++++++++++++++++
tests/TestSuite_vhost_sample.py | 428 ++++++++++++++++++++++++++++++++
5 files changed, 932 insertions(+), 1 deletion(-)
create mode 100644 conf/vhost_cuse_sample.cfg
create mode 100644 conf/vhost_sample.cfg
create mode 100644 tests/TestSuite_vhost_cuse_sample.py
create mode 100644 tests/TestSuite_vhost_sample.py
--
2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH v2 1/5] add vhost-cuse implementations for virtio pci device
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
@ 2015-07-13 6:59 ` Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 2/5] add vhost-cuse sample config file for reference Qian Xu
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Qian Xu @ 2015-07-13 6:59 UTC (permalink / raw)
To: dts
v2 changes: Remove the debug info
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
diff --git a/framework/qemu_kvm.py b/framework/qemu_kvm.py
index 4ccce81..e5da66e 100644
--- a/framework/qemu_kvm.py
+++ b/framework/qemu_kvm.py
@@ -85,7 +85,7 @@ class QEMUKvm(VirtBase):
self.char_idx = 0
self.netdev_idx = 0
self.pt_idx = 0
-
+ self.cuse_id = 0
# devices pass-through into vm
self.pt_devices = []
self.pci_maps = []
@@ -569,6 +569,8 @@ class QEMUKvm(VirtBase):
self.__add_vm_virtio_net_pci(**options)
elif options['driver'] == 'vhost-user':
self.__add_vm_virtio_user_pci(**options)
+ elif options['driver'] == 'vhost-cuse':
+ self.__add_vm_virtio_cuse_pci(**options)
def __add_vm_pci_assign(self, **options):
"""
@@ -620,6 +622,24 @@ class QEMUKvm(VirtBase):
self.__add_vm_virtio_net_pci(**opts)
+ def __add_vm_virtio_cuse_pci(self, **options):
+ """
+ driver virtio-net-pci
+ opt_mac: 52:54:00:00:00:01
+ """
+ separator = ','
+ dev_boot_line = '-netdev tap'
+ cuse_id = 'vhost%d' % self.cuse_id
+ dev_boot_line += separator + 'id=%s' % cuse_id + separator + 'ifname=tap_%s' % cuse_id + separator + "vhost=on" + separator + "script=no"
+ self.cuse_id += 1
+ self.__add_boot_line(dev_boot_line)
+ # device parameter
+ opts = {'opt_netdev': '%s' % cuse_id,
+ 'opt_id': '%s_net' % cuse_id}
+ if 'opt_mac' in options.keys() and options['opt_mac']:
+ opts['opt_mac'] = options['opt_mac']
+ self.__add_vm_virtio_net_pci(**opts)
+
def __add_vm_virtio_net_pci(self, **options):
"""
driver: virtio-net-pci
--
2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH v2 2/5] add vhost-cuse sample config file for reference
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 1/5] add vhost-cuse implementations for virtio pci device Qian Xu
@ 2015-07-13 6:59 ` Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 3/5] add vhost-user " Qian Xu
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Qian Xu @ 2015-07-13 6:59 UTC (permalink / raw)
To: dts
v2 changes: Change the cpu numbers to 2 to have the minimum numbers of cores with good perf.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
diff --git a/conf/vhost_cuse_sample.cfg b/conf/vhost_cuse_sample.cfg
new file mode 100644
index 0000000..ce34af8
--- /dev/null
+++ b/conf/vhost_cuse_sample.cfg
@@ -0,0 +1,14 @@
+# vm configuration for vhost sample case
+[vm0]
+cpu =
+ model=host,number=2,cpupin=24 25;
+mem =
+ size=4096,hugepage=yes;
+disk =
+ file=/home/img/vm0.img;
+login =
+ user=root,password=tester;
+vnc =
+ displayNum=4;
+daemon =
+ enable=yes;
--
2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH v2 3/5] add vhost-user sample config file for reference
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 1/5] add vhost-cuse implementations for virtio pci device Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 2/5] add vhost-cuse sample config file for reference Qian Xu
@ 2015-07-13 6:59 ` Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 4/5] add vhost-cuse one vm sample Qian Xu
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Qian Xu @ 2015-07-13 6:59 UTC (permalink / raw)
To: dts
v2 changes: Change the cpu numbers to 2 to have the minimum numbers of cores with good perf.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
diff --git a/conf/vhost_sample.cfg b/conf/vhost_sample.cfg
new file mode 100644
index 0000000..ce34af8
--- /dev/null
+++ b/conf/vhost_sample.cfg
@@ -0,0 +1,14 @@
+# vm configuration for vhost sample case
+[vm0]
+cpu =
+ model=host,number=2,cpupin=24 25;
+mem =
+ size=4096,hugepage=yes;
+disk =
+ file=/home/img/vm0.img;
+login =
+ user=root,password=tester;
+vnc =
+ displayNum=4;
+daemon =
+ enable=yes;
--
2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH v2 4/5] add vhost-cuse one vm sample
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
` (2 preceding siblings ...)
2015-07-13 6:59 ` [dts] [PATCH v2 3/5] add vhost-user " Qian Xu
@ 2015-07-13 6:59 ` Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 5/5] add vhost-user one vm sample test Qian Xu
2015-07-13 7:58 ` [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Liu, Yong
5 siblings, 0 replies; 7+ messages in thread
From: Qian Xu @ 2015-07-13 6:59 UTC (permalink / raw)
To: dts
v2 changes: use pep8 and autopep8 to format python codes, remove debug codes and unnecessory codes. Update the vhost core info as 1S/3C/1T to have the best perf with minimum core numbers.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
diff --git a/tests/TestSuite_vhost_cuse_sample.py b/tests/TestSuite_vhost_cuse_sample.py
new file mode 100644
index 0000000..30b78ce
--- /dev/null
+++ b/tests/TestSuite_vhost_cuse_sample.py
@@ -0,0 +1,455 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+
+Vhost Cuse one-copy sample test suite.
+"""
+import os
+import dts
+import string
+import re
+import time
+from scapy.utils import wrpcap, rdpcap
+from test_case import TestCase
+from exception import VerifyFailure
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from qemu_kvm import QEMUKvm
+
+
+class TestVhostCUSESample(TestCase, IxiaPacketGenerator):
+
+ def set_up_all(self):
+ # To Extend IXIA packet generator method, call the tester's method.
+ self.tester.extend_external_packet_generator(TestVhostCUSESample, self)
+
+ # Change config file to enable vhost-cuse compiled.
+ self.dut.send_expect(
+ "sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE"
+ "_VHOST_USER=n/' ./config/common_linuxapp",
+ "# ",
+ 30)
+ self.dut.build_install_dpdk(self.target)
+ self.dut.send_expect("cd ./lib/librte_vhost", "#", 30)
+ print self.dut.send_expect("make", "#", 30)
+ self.dut.send_expect("cd ./eventfd_link", "#", 30)
+ print self.dut.send_expect("make", "#", 30)
+ self.dut.send_expect("cd ~/dpdk", "#", 30)
+
+ # build the vhost sample in vhost-cuse mode.
+ self.dut.send_expect(
+ "sed -i -e 's/define MAX_QUEUES 512/define MAX_QUEUES 128/' "
+ "./examples/vhost/main.c",
+ "#")
+ out = self.dut.send_expect("make -C examples/vhost", "#")
+ self.verify("Error" not in out, "compilation error")
+ self.verify("No such file" not in out, "Not found file error")
+
+ # Build target with modified config file
+ self.dut.build_install_dpdk(self.target)
+
+ # Get and verify the ports
+ self.dut_ports = self.dut.get_ports()
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+
+ # Get the port's socket
+ self.pf = self.dut_ports[0]
+ netdev = self.dut.ports_info[self.pf]['port']
+ self.socket = netdev.get_nic_socket()
+ self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.socket)
+
+ # Set the params of vhost-cuse sample
+ self.vhost_app = "./examples/vhost/build/vhost-switch"
+ self.zero_copy = 0
+ self.vm2vm = 0
+ self.jumbo = 0
+ self.vhost_test = self.vhost_app + \
+ " -c %s -n %d --socket-mem 1024,1024 -- -p 0x1 --mergeable %d" + \
+ " --zero-copy %d --vm2vm %d 2 > ./vhost.out &"
+
+ # Define the virtio/VM variables
+ self.virtio1 = "eth1"
+ self.virtio2 = "eth2"
+ self.virtio1_mac = "52:54:00:00:00:01"
+ self.virtio2_mac = "52:54:00:00:00:02"
+ self.src1 = "192.168.4.1"
+ self.src2 = "192.168.3.1"
+ self.dst1 = "192.168.3.1"
+ self.dst2 = "192.168.4.1"
+ self.vm_dut = None
+
+ # Define the table columns
+ self.header_row = ["Test", "Mode", "Frame", "Mpps", "% linerate"]
+ self.memory_channel = 4
+
+ def set_up(self):
+ #
+ # Run before each test case.
+ #
+ # Launch vhost sample using default params
+
+ if "jumbo" in self.running_case:
+ self.jumbo = 1
+ self.frame_sizes = [
+ 68,
+ 128,
+ 256,
+ 512,
+ 1024,
+ 1280,
+ 1518,
+ 2048,
+ 5000,
+ 9000]
+ self.vm_testpmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf00 " \
+ + "--disable-hw-vlan-filter --max-pkt-len 9600"
+ else:
+ self.jumbo = 0
+ self.frame_sizes = [68, 128, 256, 512, 1024, 1280, 1518]
+ self.vm_testpmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf00 --disable-hw-vlan-filter"
+ self.dut.send_expect("rm -rf ./vhost.out", "#")
+
+ self.launch_vhost_sample()
+
+ # start VM with 2virtio
+ self.start_onevm()
+
+ def launch_vhost_sample(self):
+ #
+ # Launch the vhost sample with different parameters
+ #
+ self.coremask = dts.create_mask(self.cores)
+ self.vhostapp_testcmd = self.vhost_test % (
+ self.coremask, self.memory_channel, self.jumbo, self.zero_copy, self.vm2vm)
+ # Clean and prepare the vhost cuse modules
+ self.dut.send_expect("rm -rf /dev/vhost-net", "#", 20)
+ self.dut.send_expect("modprobe fuse", "#", 20)
+ self.dut.send_expect("modprobe cuse", "#", 20)
+ self.dut.send_expect("rmmod eventfd_link", "#", 20)
+ self.dut.send_expect(
+ "insmod lib/librte_vhost/eventfd_link/eventfd_link.ko",
+ "#",
+ 20)
+ self.dut.send_expect(self.vhostapp_testcmd, "# ", 40)
+ time.sleep(30)
+ try:
+ print "Launch vhost sample\n"
+ out = self.dut.send_expect(
+ "cat ./vhost.out",
+ "VHOST_DATA: Procesing on",
+ 20)
+ if "Error" in out:
+ raise Exception("Launch vhost sample failed")
+ except Exception as e:
+ print dts.RED("Failed to launch vhost sample: %s" % str(e))
+
+ def start_onevm(self):
+ #
+ # Start One VM with 2 virtio devices
+ #
+
+ self.vm = QEMUKvm(self.dut, 'vm0', 'vhost_sample')
+ if "cuse" in self.running_case:
+ vm_params = {}
+ vm_params['driver'] = 'vhost-cuse'
+ vm_params['opt_mac'] = self.virtio1_mac
+ self.vm.set_vm_device(**vm_params)
+ vm_params['opt_mac'] = self.virtio2_mac
+ self.vm.set_vm_device(**vm_params)
+ print "cuse setup is done, vm_params: ", vm_params
+ try:
+ self.vm_dut = self.vm.start(auto_portmap=False)
+ if self.vm_dut is None:
+ raise Exception("Set up VM ENV failed")
+ except Exception as e:
+ print dts.RED("Failure for %s" % str(e))
+
+ return True
+
+ def vm_testpmd_start(self):
+ #
+ # Start testpmd in vm
+ #
+ if self.vm_dut is not None:
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd, "testpmd>", 20)
+ # Start tx_first
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ def clear_vhost_env(self):
+ #
+ # Kill all vhost sample, shutdown VM
+ #
+ if self.vm_dut:
+ self.vm_dut.kill_all()
+ time.sleep(1)
+ self.vm_dut.close()
+ self.vm_dut.logger.logger_exit()
+ self.vm_dut = None
+ if self.vm:
+ self.vm.stop()
+ self.vm = None
+
+ def set_legacy_disablefw(self):
+ #
+ # Disable firewall and ip tables in legacy case
+ #
+ if self.vm_dut is not None:
+ self.vm_dut.send_expect("systemctl stop firewalld.service", "#")
+ self.vm_dut.send_expect("systemctl disable firewalld.service", "#")
+ self.vm_dut.send_expect("systemctl stop ip6tables.service", "#")
+ self.vm_dut.send_expect("systemctl disable ip6tables.service", "#")
+ self.vm_dut.send_expect("systemctl stop iptables.service", "#")
+ self.vm_dut.send_expect("systemctl disable iptables.service", "#")
+ self.vm_dut.send_expect(
+ "systemctl stop NetworkManager.service",
+ "#")
+ self.vm_dut.send_expect(
+ "systemctl disable NetworkManager.service",
+ "#")
+ self.vm_dut.send_expect(
+ "echo 1 >/proc/sys/net/ipv4/ip_forward",
+ "#")
+
+ def set_onevm_legacy_fwd(self):
+ if self.vm_dut is not None:
+ ifcfg = self.vm_dut.send_expect("ifconfig -a", "#", 10)
+ intfs = re.compile('eth\d').findall(ifcfg)
+ # Get the virito1/virtio2's interface names
+ for intf in intfs:
+ out_mac = self.vm_dut.send_expect(
+ "ifconfig %s" %
+ intf, "#", 10)
+ if self.virtio1_mac in out_mac:
+ self.virtio1 = intf
+ if self.virtio2_mac in out_mac:
+ self.virtio2 = intf
+ print "\nvirtio1's intf is %s" % self.virtio1
+ print "\nvirtio2's intf is %s" % self.virtio2
+ # Set the MTU for jumboframe enabled case
+ if self.jumbo == 1:
+ self.vm_dut.send_expect(
+ "ifconfig %s mtu 9000" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ifconfig %s mtu 9000" %
+ self.virtio2, "#")
+ # Set the ipv4 fwd rules
+ self.vm_dut.send_expect(
+ "ip addr add 192.168.4.2/24 dev %s" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ip addr add 192.168.3.2/24 dev %s" %
+ self.virtio2, "#")
+ self.vm_dut.send_expect(
+ "ip link set dev %s up" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ip link set dev %s up" %
+ self.virtio2, "#")
+ self.vm_dut.send_expect(
+ "ip neigh add 192.168.4.1 lladdr 52:00:00:00:00:01 dev %s" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ip neigh add 192.168.3.1 lladdr 52:00:00:00:00:02 dev %s" %
+ self.virtio2, "#")
+ self.vm_dut.send_expect("ip route show", "#")
+ print self.vm_dut.send_expect("arp -a", "#")
+
+ def test_perf_cuse_one_vm_legacy_fwd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+
+ self.vm_dut.restore_interfaces()
+ # Setup legacy env
+ self.set_legacy_disablefw()
+ self.set_onevm_legacy_fwd()
+
+ time.sleep(5)
+
+ out1 = self.dut.get_session_output(timeout=2)
+ # print "\nclean out1:", out1
+
+ out = self.dut.send_expect("cat ./vhost.out", "# ", 20)
+ print out
+ # Get the VLAN ID for virtio
+ print "\ncheck the vlan info: \n"
+ l1 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio1_mac)), out)
+ if len(l1) > 0:
+ vlan_id1 = l1[0]
+ print "vlan_id1 is ", vlan_id1
+ l2 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio2_mac)), out)
+ if len(l2) > 0:
+ vlan_id2 = l2[0]
+ print "vlan_id2 is ", vlan_id2
+
+ dts.results_table_add_header(self.header_row)
+
+ # Create pcap file and ixia traffic
+ for frame_size in self.frame_sizes:
+ info = "Running test %s, and %d frame size.\n" % (
+ self.running_case, frame_size)
+ self.logger.info(info)
+
+ payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ flow1 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio1_mac, vlan_id1, self.src1, self.dst1, payload_size)
+ flow2 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio2_mac, vlan_id2, self.src2, self.dst2, payload_size)
+
+ self.tester.scapy_append('wrpcap("flow1.pcap", %s)' % flow1)
+ self.tester.scapy_append('wrpcap("flow2.pcap",%s)' % flow2)
+ self.tester.scapy_execute()
+
+ # Capture the performance
+ tgenInput = []
+ port = self.tester.get_local_port(self.pf)
+ tgenInput.append((port, port, "flow2.pcap"))
+
+ _, pps = self.tester.traffic_generator_throughput(
+ tgenInput, delay=15)
+ pps /= 1000000.0
+ linerate = self.wirespeed(self.nic, frame_size, 1)
+ pct = pps * 100 / linerate
+ scenario = self.running_case
+ mode = "vhost cuse"
+ data_row = [scenario, mode, frame_size, str(pps), str(pct)]
+ dts.results_table_add_row(data_row)
+
+ dts.results_table_print()
+
+ # Stop the Vhost sample
+ self.dut.send_expect("killall -s INT vhost-switch", "#", 20)
+
+ def test_perf_cuse_one_vm_dpdk_fwd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+
+ # start testpmd on VM
+ self.vm_testpmd_start()
+ time.sleep(5)
+ # Clean the output to make the next command can get correct answers
+ out_clean = self.dut.get_session_output(timeout=2)
+ out = self.dut.send_expect("cat ./vhost.out", "# ", 20)
+ # Get the VLAN ID for virtio
+ print "\nout:", out
+ print "\ncheck the vlan info: \n"
+ l1 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio1_mac)), out)
+ if len(l1) > 0:
+ vlan_id1 = l1[0]
+ print vlan_id1
+ l2 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio2_mac)), out)
+ if len(l2) > 0:
+ vlan_id2 = l2[0]
+ print vlan_id2
+
+ dts.results_table_add_header(self.header_row)
+
+ # Create pcap file and ixia traffic
+ for frame_size in self.frame_sizes:
+ info = "Running test %s, and %d frame size.\n" % (
+ self.running_case, frame_size)
+ self.logger.info(info)
+
+ payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ flow1 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio1_mac, vlan_id1, self.src1, self.dst1, payload_size)
+ flow2 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio2_mac, vlan_id2, self.src2, self.dst2, payload_size)
+ self.tester.scapy_append('wrpcap("flow1.pcap", %s)' % flow1)
+ self.tester.scapy_append('wrpcap("flow2.pcap",%s)' % flow2)
+ self.tester.scapy_execute()
+
+ # Capture the performance
+ tgenInput = []
+ port = self.tester.get_local_port(self.pf)
+ tgenInput.append((port, port, "flow1.pcap"))
+ tgenInput.append((port, port, "flow2.pcap"))
+
+ _, pps = self.tester.traffic_generator_throughput(
+ tgenInput, delay=15)
+ pps /= 1000000.0
+ linerate = self.wirespeed(self.nic, frame_size, 1)
+ pct = pps * 100 / linerate
+ scenario = self.running_case
+ mode = "vhost user"
+ data_row = [scenario, mode, frame_size, str(pps), str(pct)]
+ dts.results_table_add_row(data_row)
+
+ dts.results_table_print()
+ # Stop testpmd
+ print self.vm_dut.send_expect("stop", "testpmd>")
+ time.sleep(1)
+ self.vm_dut.send_expect("quit", "# ")
+
+ # Stop the Vhost sample
+ self.dut.send_expect("killall -s INT vhost-switch", "#")
+
+ def test_perf_cuse_one_vm_legacy_fwd_jumboframe(self):
+ self.test_perf_cuse_one_vm_legacy_fwd()
+
+ def test_perf_cuse_one_vm_dpdk_fwd_jumboframe(self):
+ self.test_perf_cuse_one_vm_dpdk_fwd()
+
+ def tear_down(self):
+ #
+ # Run after each test case.
+ #
+ self.clear_vhost_env()
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ # Restore the config file and recompile the package
+ self.dut.send_expect(
+ "sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE_VHOST_USER=y/' "
+ "./config/common_linuxapp",
+ "# ",
+ 30)
+ self.dut.build_install_dpdk(self.target)
+ time.sleep(20)
--
2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH v2 5/5] add vhost-user one vm sample test
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
` (3 preceding siblings ...)
2015-07-13 6:59 ` [dts] [PATCH v2 4/5] add vhost-cuse one vm sample Qian Xu
@ 2015-07-13 6:59 ` Qian Xu
2015-07-13 7:58 ` [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Liu, Yong
5 siblings, 0 replies; 7+ messages in thread
From: Qian Xu @ 2015-07-13 6:59 UTC (permalink / raw)
To: dts
v2 changes: use pep8 and autopep8 to format python codes, remove debug codes and unnecessory codes. Update the vhost core info as 1S/3C/1T to h
ave the best perf with minimum core numbers.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
diff --git a/tests/TestSuite_vhost_sample.py b/tests/TestSuite_vhost_sample.py
new file mode 100644
index 0000000..f148bb4
--- /dev/null
+++ b/tests/TestSuite_vhost_sample.py
@@ -0,0 +1,428 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+
+Vhost user one-copy sample test suite.
+"""
+import os
+import dts
+import string
+import re
+import time
+from scapy.utils import wrpcap, rdpcap
+from test_case import TestCase
+from exception import VerifyFailure
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from qemu_kvm import QEMUKvm
+
+
+class TestVhostSample(TestCase, IxiaPacketGenerator):
+
+ def set_up_all(self):
+ # To Extend IXIA packet generator method, call the tester's method.
+ self.tester.extend_external_packet_generator(TestVhostSample, self)
+
+ # Build target with modified config file
+ self.dut.build_install_dpdk(self.target)
+
+ # Get and verify the ports
+ self.dut_ports = self.dut.get_ports()
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+
+ # Get the port's socket
+ self.pf = self.dut_ports[0]
+ netdev = self.dut.ports_info[self.pf]['port']
+ self.socket = netdev.get_nic_socket()
+ self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.socket)
+
+ # Set the params of vhost sample
+ self.vhost_app = "./examples/vhost/build/vhost-switch"
+ self.zero_copy = 0
+ self.vm2vm = 0
+ self.jumbo = 0
+
+ # Using file to save the vhost sample output since in jumboframe case,
+ # there will be lots of output
+ self.vhost_test = self.vhost_app + \
+ " -c %s -n %d --socket-mem 1024,1024 -- -p 0x1 --mergeable %d" + \
+ " --zero-copy %d --vm2vm %d 2 > ./vhost.out &"
+ # build the vhost sample in vhost-user mode.
+ self.dut.send_expect(
+ "sed -i -e 's/define MAX_QUEUES 512/define MAX_QUEUES 128/'"
+ " ./examples/vhost/main.c",
+ "#")
+ out = self.dut.send_expect("make -C examples/vhost", "#")
+ self.verify("Error" not in out, "compilation error")
+ self.verify("No such file" not in out, "Not found file error")
+
+ # Define the virtio/VM variables
+ self.virtio1 = "eth1"
+ self.virtio2 = "eth2"
+ self.virtio1_mac = "52:54:00:00:00:01"
+ self.virtio2_mac = "52:54:00:00:00:02"
+ self.src1 = "192.168.4.1"
+ self.src2 = "192.168.3.1"
+ self.dst1 = "192.168.3.1"
+ self.dst2 = "192.168.4.1"
+ self.vm_dut = None
+
+ self.header_row = ["Test", "Mode", "Frame", "Mpps", "% linerate"]
+ self.memory_channel = 4
+
+ def set_up(self):
+ #
+ # Run before each test case.
+ #
+ # Launch vhost sample using default params
+
+ if "jumbo" in self.running_case:
+ self.jumbo = 1
+ self.frame_sizes = [
+ 68,
+ 128,
+ 256,
+ 512,
+ 1024,
+ 1280,
+ 1518,
+ 2048,
+ 5000,
+ 9000]
+ self.vm_testpmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + \
+ " -- -i --txqflags=0xf00 --disable-hw-vlan-filter --max-pkt-len 9600"
+ else:
+ self.jumbo = 0
+ self.frame_sizes = [68, 128, 256, 512, 1024, 1280, 1518]
+ self.vm_testpmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf00 --disable-hw-vlan-filter"
+ self.dut.send_expect("rm -rf ./vhost.out", "#")
+
+ self.launch_vhost_sample()
+
+ print "Start VM with 2virtio\n"
+ # start VM with 2virtio
+ self.start_onevm()
+
+ def launch_vhost_sample(self):
+ #
+ # Launch the vhost sample with different parameters
+ #
+ self.coremask = dts.create_mask(self.cores)
+ self.vhostapp_testcmd = self.vhost_test % (
+ self.coremask, self.memory_channel, self.jumbo, self.zero_copy, self.vm2vm)
+ self.dut.send_expect(self.vhostapp_testcmd, "# ", 40)
+ time.sleep(30)
+ try:
+ print "Launch vhost sample\n"
+ out = self.dut.send_expect(
+ "cat ./vhost.out",
+ "VHOST_CONFIG: bind to vhost-net",
+ 20)
+ if "Error" in out:
+ raise Exception("Launch vhost sample failed")
+ except Exception as e:
+ print dts.RED("Failed to launch vhost sample: %s" % str(e))
+ self.dut.send_expect("rm -rf ./vhost-net", "#", 20)
+
+ def start_onevm(self):
+ #
+ # Start One VM with 2 virtio devices
+ #
+
+ self.vm = QEMUKvm(self.dut, 'vm0', 'vhost_sample')
+ if "user" in self.running_case:
+ vm_params = {}
+ vm_params['driver'] = 'vhost-user'
+ vm_params['opt_path'] = './vhost-net'
+ vm_params['opt_mac'] = self.virtio1_mac
+ self.vm.set_vm_device(**vm_params)
+ vm_params['opt_mac'] = self.virtio2_mac
+ self.vm.set_vm_device(**vm_params)
+
+ try:
+ self.vm_dut = self.vm.start(auto_portmap=False)
+ if self.vm_dut is None:
+ raise Exception("Set up VM ENV failed")
+ except Exception as e:
+ print dts.RED("Failure for %s" % str(e))
+
+ return True
+
+ def vm_testpmd_start(self):
+ #
+ # Start testpmd in vm
+ #
+ if self.vm_dut is not None:
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd, "testpmd>", 20)
+ # Start tx_first
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ def clear_vhost_env(self):
+ #
+ # Kill all vhost sample, shutdown VM
+ #
+ if self.vm_dut:
+ self.vm_dut.kill_all()
+ time.sleep(1)
+ self.vm_dut.close()
+ self.vm_dut.logger.logger_exit()
+ self.vm_dut = None
+ if self.vm:
+ self.vm.stop()
+ self.vm = None
+
+ def set_legacy_disablefw(self):
+ #
+ # Disable firewall and iptables in legacy case
+ #
+ if self.vm_dut is not None:
+ self.vm_dut.send_expect("systemctl stop firewalld.service", "#")
+ self.vm_dut.send_expect("systemctl disable firewalld.service", "#")
+ self.vm_dut.send_expect("systemctl stop ip6tables.service", "#")
+ self.vm_dut.send_expect("systemctl disable ip6tables.service", "#")
+ self.vm_dut.send_expect("systemctl stop iptables.service", "#")
+ self.vm_dut.send_expect("systemctl disable iptables.service", "#")
+ self.vm_dut.send_expect(
+ "systemctl stop NetworkManager.service",
+ "#")
+ self.vm_dut.send_expect(
+ "systemctl disable NetworkManager.service",
+ "#")
+ self.vm_dut.send_expect(
+ "echo 1 >/proc/sys/net/ipv4/ip_forward",
+ "#")
+
+ def set_onevm_legacy_fwd(self):
+ if self.vm_dut is not None:
+ ifcfg = self.vm_dut.send_expect("ifconfig -a", "#", 10)
+ intfs = re.compile('eth\d').findall(ifcfg)
+ # Find the virtio1 and virtio2's interface names
+ for intf in intfs:
+ out_mac = self.vm_dut.send_expect(
+ "ifconfig %s" %
+ intf, "#", 10)
+ if self.virtio1_mac in out_mac:
+ self.virtio1 = intf
+ if self.virtio2_mac in out_mac:
+ self.virtio2 = intf
+ print "\nvirtio1's intf is %s" % self.virtio1
+ print "\nvirtio2's intf is %s" % self.virtio2
+ # Set the mtu 9000 if jumboframe is enabled.
+ if self.jumbo == 1:
+ self.vm_dut.send_expect(
+ "ifconfig %s mtu 9000" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ifconfig %s mtu 9000" %
+ self.virtio2, "#")
+ # Set up the ip address/ipv4 fwd tables
+ self.vm_dut.send_expect(
+ "ip addr add 192.168.4.2/24 dev %s" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ip addr add 192.168.3.2/24 dev %s" %
+ self.virtio2, "#")
+ self.vm_dut.send_expect(
+ "ip link set dev %s up" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ip link set dev %s up" %
+ self.virtio2, "#")
+ self.vm_dut.send_expect(
+ "ip neigh add 192.168.4.1 lladdr 52:00:00:00:00:01 dev %s" %
+ self.virtio1, "#")
+ self.vm_dut.send_expect(
+ "ip neigh add 192.168.3.1 lladdr 52:00:00:00:00:02 dev %s" %
+ self.virtio2, "#")
+ self.vm_dut.send_expect("ip route show", "#")
+ print self.vm_dut.send_expect("arp -a", "#")
+
+ def test_perf_user_one_vm_legacy_fwd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+ # Restore the virtio interfaces to use legacy driver
+ self.vm_dut.restore_interfaces()
+
+ self.set_legacy_disablefw()
+ # Set the legacy fwd rules then get the VLAN id from vhost sample
+ # output
+ self.set_onevm_legacy_fwd()
+
+ time.sleep(5)
+ out_clean = self.dut.get_session_output(timeout=2)
+ out = self.dut.send_expect("cat ./vhost.out", "# ", 20)
+ # Get the VLAN ID for virtio
+ print out, "\ncheck the vlan info: \n"
+ l1 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio1_mac)), out)
+ if len(l1) > 0:
+ vlan_id1 = l1[0]
+ print "vlan_id1 is ", vlan_id1
+ l2 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio2_mac)), out)
+ if len(l2) > 0:
+ vlan_id2 = l2[0]
+ print "vlan_id2 is ", vlan_id2
+
+ dts.results_table_add_header(self.header_row)
+
+ # Create pcap file and ixia traffic
+ for frame_size in self.frame_sizes:
+ info = "Running test %s, and %d frame size.\n" % (
+ self.running_case, frame_size)
+ self.logger.info(info)
+
+ payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ flow1 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio1_mac, vlan_id1, self.src1, self.dst1, payload_size)
+ flow2 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio2_mac, vlan_id2, self.src2, self.dst2, payload_size)
+
+ self.tester.scapy_append('wrpcap("flow1.pcap", %s)' % flow1)
+ self.tester.scapy_append('wrpcap("flow2.pcap",%s)' % flow2)
+ self.tester.scapy_execute()
+
+ # Capture the performance
+ tgenInput = []
+ port = self.tester.get_local_port(self.pf)
+ tgenInput.append((port, port, "flow2.pcap"))
+
+ _, pps = self.tester.traffic_generator_throughput(
+ tgenInput, delay=15)
+ pps /= 1000000.0
+ linerate = self.wirespeed(self.nic, frame_size, 1)
+ pct = pps * 100 / linerate
+ scenario = self.running_case
+ mode = "vhost user"
+ data_row = [scenario, mode, frame_size, str(pps), str(pct)]
+ dts.results_table_add_row(data_row)
+
+ dts.results_table_print()
+
+ # Stop the Vhost sample
+ self.dut.send_expect("killall -s INT vhost-switch", "#", 20)
+
+ def test_perf_user_one_vm_dpdk_fwd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+
+ # start testpmd on VM
+ self.vm_testpmd_start()
+ time.sleep(5)
+ # Clean the output to ensure the commands cat ./vhost.out can be sent
+ # and got answered correctly.
+ out_clean = self.dut.get_session_output(timeout=2)
+ out = self.dut.send_expect("cat ./vhost.out", "# ", 20)
+ # Get the VLAN ID for virtio
+ print out, "\ncheck the vlan info: \n"
+ l1 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio1_mac)), out)
+ if len(l1) > 0:
+ vlan_id1 = l1[0]
+ print vlan_id1
+ l2 = re.findall(
+ 'MAC_ADDRESS.*?%s.*?and.*?VLAN_TAG.*?(\d+).*?registered' %
+ (str(self.virtio2_mac)), out)
+ if len(l2) > 0:
+ vlan_id2 = l2[0]
+ print vlan_id2
+
+ dts.results_table_add_header(self.header_row)
+
+ # Create pcap file and ixia traffic
+ for frame_size in self.frame_sizes:
+ info = "Running test %s, and %d frame size.\n" % (
+ self.running_case, frame_size)
+ self.logger.info(info)
+
+ payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ flow1 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio1_mac, vlan_id1, self.src1, self.dst1, payload_size)
+ flow2 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio2_mac, vlan_id2, self.src2, self.dst2, payload_size)
+ self.tester.scapy_append('wrpcap("flow1.pcap", %s)' % flow1)
+ self.tester.scapy_append('wrpcap("flow2.pcap",%s)' % flow2)
+ self.tester.scapy_execute()
+
+ # Capture the performance
+ tgenInput = []
+ port = self.tester.get_local_port(self.pf)
+ tgenInput.append((port, port, "flow1.pcap"))
+ tgenInput.append((port, port, "flow2.pcap"))
+
+ _, pps = self.tester.traffic_generator_throughput(
+ tgenInput, delay=15)
+ pps /= 1000000.0
+ linerate = self.wirespeed(self.nic, frame_size, 1)
+ pct = pps * 100 / linerate
+ scenario = self.running_case
+ mode = "vhost user"
+ data_row = [scenario, mode, frame_size, str(pps), str(pct)]
+ dts.results_table_add_row(data_row)
+
+ dts.results_table_print()
+ # Stop testpmd
+ print self.vm_dut.send_expect("stop", "testpmd>")
+ time.sleep(1)
+ self.vm_dut.send_expect("quit", "# ")
+
+ # Stop the Vhost sample
+ self.dut.send_expect("killall -s INT vhost-switch", "#")
+
+ def test_perf_user_one_vm_legacy_fwd_jumboframe(self):
+ self.test_perf_user_one_vm_legacy_fwd()
+
+ def test_perf_user_one_vm_dpdk_fwd_jumboframe(self):
+ self.test_perf_user_one_vm_dpdk_fwd()
+
+ def tear_down(self):
+ #
+ # Run after each test case.
+ #
+ self.clear_vhost_env()
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
` (4 preceding siblings ...)
2015-07-13 6:59 ` [dts] [PATCH v2 5/5] add vhost-user one vm sample test Qian Xu
@ 2015-07-13 7:58 ` Liu, Yong
5 siblings, 0 replies; 7+ messages in thread
From: Liu, Yong @ 2015-07-13 7:58 UTC (permalink / raw)
To: Xu, Qian Q, dts
Thanks Qian. Applied in 1.1 branch.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Qian Xu
> Sent: Monday, July 13, 2015 3:00 PM
> To: dts@dpdk.org
> Subject: [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample
> case
>
> This patchset will enable vhost-user and vhost-cuse sample one-vm
> performance ca ses based on the virtualization framework. The vhost-
> user's implementation is ba sed on vhost user socket, while the vhost-
> cuse is via IOCTL messages.
> The patchset includes below things:
> 1. Vhost-user sample automation has 4 cases: one VM with dpdk fwd, one VM
> with d pdk fwd with jumboframe enabled, one VM with legacy fwd, one VM
> with legacy fwd with jumboframe enabled.
> 2. Vhost-cuse sample automation has similar 4 cases as above.
> 3. The required qemu version fo vhost-user is >=qemu2.2
> 4. The one-vm has 2 virtio, and the vhost has binded to one physical port.
> 5. update qemu_kvm.py to support vhost-cuse.
> 6. vhost_cuse_sample.cfg and vhost_sample.cfg are the config file for
> references .
>
> v2 changes:
> 1. Remove unnecessary codes and debug codes.
> 2. use pep8 to align the codes format.
> 3. minor update about the core numbers of vhost usage. Set 1S/3C/1T as
> default core setting for vhost to get best perf.
> 4. change the vm core numbers to 2cores in the config files.
>
>
> Qian Xu (5):
> add vhost-cuse implementations for virtio pci device
> add vhost-cuse sample config file for reference
> add vhost-user sample config file for reference
> add vhost-cuse one vm sample
> add vhost-user one vm sample test
>
> conf/vhost_cuse_sample.cfg | 14 ++
> conf/vhost_sample.cfg | 14 ++
> framework/qemu_kvm.py | 22 +-
> tests/TestSuite_vhost_cuse_sample.py | 455
> +++++++++++++++++++++++++++++++++++
> tests/TestSuite_vhost_sample.py | 428
> ++++++++++++++++++++++++++++++++
> 5 files changed, 932 insertions(+), 1 deletion(-)
> create mode 100644 conf/vhost_cuse_sample.cfg
> create mode 100644 conf/vhost_sample.cfg
> create mode 100644 tests/TestSuite_vhost_cuse_sample.py
> create mode 100644 tests/TestSuite_vhost_sample.py
>
> --
> 2.1.0
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-07-13 7:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-13 6:59 [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 1/5] add vhost-cuse implementations for virtio pci device Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 2/5] add vhost-cuse sample config file for reference Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 3/5] add vhost-user " Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 4/5] add vhost-cuse one vm sample Qian Xu
2015-07-13 6:59 ` [dts] [PATCH v2 5/5] add vhost-user one vm sample test Qian Xu
2015-07-13 7:58 ` [dts] [PATCH v2 0/5]Add vhost-user and vhost-cuse one vm sample case Liu, Yong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).