From: Qian Xu <qian.q.xu@intel.com>
To: dts@dpdk.org
Subject: [dts] [PATCH] Update performance test part for 40G case.
Date: Wed, 12 Aug 2015 15:15:45 +0800 [thread overview]
Message-ID: <1439363745-11764-1-git-send-email-qian.q.xu@intel.com> (raw)
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
For FVL40G NICs, we need 2 queues per port and the --rss-ip options for best performance, also the traffic needs to be changed, not fixed one.
diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py
index 7acf937..afb2450 100644
--- a/tests/TestSuite_pmd.py
+++ b/tests/TestSuite_pmd.py
@@ -42,9 +42,9 @@ from plotting import Plotting
from time import sleep
from settings import HEADER_SIZE
from pmd_output import PmdOutput
+from etgen import IxiaPacketGenerator
-
-class TestPmd(TestCase):
+class TestPmd(TestCase,IxiaPacketGenerator):
def plot_results(self, number_ports):
@@ -76,15 +76,17 @@ class TestPmd(TestCase):
PMD prerequisites.
"""
+ self.tester.extend_external_packet_generator(TestPmd, self)
+
self.frame_sizes = [64, 65, 128, 256, 512, 1024, 1280, 1518]
self.rxfreet_values = [0, 8, 16, 32, 64, 128]
self.test_cycles = [{'cores': '1S/1C/1T', 'Mpps': {}, 'pct': {}},
- {'cores': '1S/1C/2T', 'Mpps': {}, 'pct': {}},
{'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}},
{'cores': '1S/2C/2T', 'Mpps': {}, 'pct': {}},
- {'cores': '1S/4C/2T', 'Mpps': {}, 'pct': {}}
+ {'cores': '1S/4C/1T', 'Mpps': {}, 'pct': {}},
+ {'cores': '1S/8C/1T', 'Mpps': {}, 'pct': {}}
]
self.table_header = ['Frame Size']
@@ -151,7 +153,7 @@ class TestPmd(TestCase):
core_mask = dts.create_mask(core_list)
port_mask = dts.create_mask(self.dut.get_ports())
- self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
+ self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s --rss-ip" % (core_mask, queues, queues, port_mask))
info = "Executing PMD (mac fwd) using %s\n" % test_cycle['cores']
dts.report(info, annex=True)
@@ -167,9 +169,9 @@ class TestPmd(TestCase):
# create pcap file
self.logger.info("Running with frame size %d " % frame_size)
- payload_size = frame_size - self.headers_size
+ payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
self.tester.scapy_append(
- 'wrpcap("test.pcap", [Ether(src="52:00:00:00:00:00")/IP()/UDP()/("X"*%d)])' % payload_size)
+ 'wrpcap("test.pcap", [Ether(src="52:00:00:00:00:00")/IP(src="1.2.3.4",dst="1.1.1.1")/("X"*%d)])' % payload_size)
self.tester.scapy_execute()
# run traffic generator
@@ -410,7 +412,22 @@ class TestPmd(TestCase):
"packet pass assert error, expected %d TX bytes, actual %d" % (frame_size, p0tx_bytes))
return out
-
+
+ def ip(self, port, frag, src, proto, tos, dst, chksum, len, options, version, flags, ihl, ttl, id):
+ self.add_tcl_cmd("protocol config -name ip")
+ self.add_tcl_cmd('ip config -sourceIpAddr "%s"' % src)
+ self.add_tcl_cmd("ip config -sourceIpAddrMode ipRandom")
+ self.add_tcl_cmd('ip config -destIpAddr "%s"' % dst)
+ self.add_tcl_cmd("ip config -destIpAddrMode ipIdle")
+ self.add_tcl_cmd("ip config -ttl %d" % ttl)
+ self.add_tcl_cmd("ip config -totalLength %d" % len)
+ self.add_tcl_cmd("ip config -fragment %d" % frag)
+ self.add_tcl_cmd("ip config -ipProtocol ipV4ProtocolReserved255")
+ self.add_tcl_cmd("ip config -identifier %d" % id)
+ self.add_tcl_cmd("stream config -framesize %d" % (len + 18))
+ self.add_tcl_cmd("ip set %d %d %d" % (self.chasId, port['card'], port['port']))
+
+
def tear_down(self):
"""
Run after each test case.
--
2.1.0
next reply other threads:[~2015-08-12 7:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-12 7:15 Qian Xu [this message]
2015-08-13 5:13 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439363745-11764-1-git-send-email-qian.q.xu@intel.com \
--to=qian.q.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).