From: Yufen Mo <yufengx.mo@intel.com>
To: dts@dpdk.org
Subject: [dts] [dts 1/4] add unified packet type module and test suite
Date: Thu, 17 Sep 2015 09:07:51 +0800 [thread overview]
Message-ID: <1442452074-4148-2-git-send-email-yufengx.mo@intel.com> (raw)
In-Reply-To: <1442452074-4148-1-git-send-email-yufengx.mo@intel.com>
From: yufengmx <yufengx.mo@intel.com>
fix some issue of the test plan for unified packet type
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
test_plans/uni_pkt_test_plan.rst | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/test_plans/uni_pkt_test_plan.rst b/test_plans/uni_pkt_test_plan.rst
index c42308b..5ef661c 100644
--- a/test_plans/uni_pkt_test_plan.rst
+++ b/test_plans/uni_pkt_test_plan.rst
@@ -68,14 +68,14 @@ Send time sync packet from tester::
Check below message dumped by testpmd::
(outer) L2 type: ETHER_Timesync
-
+
Send ARP packet from tester::
sendp([Ether(dst='FF:FF:FF:FF:FF:FF')/ARP()],
iface=txItf)
Check below message dumped by testpmd::
(outer) L2 type: ETHER_ARP
-
+
Send LLDP packet from tester::
sendp([Ether()/LLDP()/LLDPManagementAddress()], iface=txItf)
@@ -85,13 +85,12 @@ Check below message dumped by testpmd::
Test Case: IPv4&L4 packet type detect
=====================================
This case checked that whether L3 and L4 packet can be normally detected.
-Niantic and i350 will shown that L2 type is MAC.
Only Fortville can detect icmp packet.
Only niantic and i350 can detect ipv4 extension packet.
-Fortville did not detect whether packet contian ipv4 header options, so L3
+Fortville did not detect whether packet contain ipv4 header options, so L3
type will be shown as IPV4_EXT_UNKNOWN.
Fortville will identify all unrecognized L4 packet as L4_NONFRAG.
-Only Fortville can inentify L4 fragement packet.
+Only Fortville can identify L4 fragment packet.
Send IP only packet and verify L2/L3/L4 corrected::
sendp([Ether()/IP()/Raw('\0'*60)], iface=txItf)
@@ -142,11 +141,10 @@ Send IP extension+SCTP packet and verify L2/L3/L4 corrected(Niantic,i350)::
Test Case: IPv6&L4 packet type detect
=====================================
This case checked that whether IPv6 and L4 packet can be normally detected.
-Niantic and i350 will shown that L2 type is MAC.
-Fortville did not detect whether packet contian ipv6 extension options, so L3
+Fortville did not detect whether packet contain ipv6 extension options, so L3
type will be shown as IPV6_EXT_UNKNOWN.
Fortville will identify all unrecognized L4 packet as L4_NONFRAG.
-Only Fortville can inentify L4 fragement packet.
+Only Fortville can identify L4 fragment packet.
Send IPv6 only packet and verify L2/L3/L4 corrected::
sendp([Ether()/IPv6()/Raw('\0'*60)], iface=txItf)
@@ -214,7 +212,7 @@ Send IPv4+IPv4+SCTP packet and verify inner and outer L2/L3/L4 corrected::
Inner L4 type: SCTP
Send IPv4+IPv4+ICMP packet and verify inner and outer L2/L3/L4 corrected::
- sendp([Ether()/IP()/IP()/SCTP()/Raw('\0'*40)],iface=txItf)
+ sendp([Ether()/IP()/IP()/ICMP()/Raw('\0'*40)],iface=txItf)
Inner L4 type: ICMP
@@ -257,7 +255,7 @@ detected by Niantic and i350.
Send IPv4+IPv6 packet and verify inner and outer L2/L3/L4 corrected::
sendp([Ether()/IP()/IPv6()/Raw('\0'*40)], iface=txItf)
- (outer) L2 type: MAC
+ (outer) L2 type: ETHER
(outer) L3 type: IPV4
(outer) L4 type: Unknown
Tunnel type: IP
@@ -332,7 +330,7 @@ Send IPv4+IPv4+SCTP packet and verify inner and outer L2/L3/L4 corrected::
Inner L4 type: SCTP
Send IPv4+IPv4+ICMP packet and verify inner and outer L2/L3/L4 corrected::
- sendp([Ether()/IP()/IP()/SCTP()/Raw('\0'*40)],iface=txItf)
+ sendp([Ether()/IP()/IP()/ICMP()/Raw('\0'*40)],iface=txItf)
Inner L4 type: ICMP
@@ -501,7 +499,7 @@ Send IPV6+NVGRE+MAC packet and verify inner and outer L2/L3/L4 corrected::
(outer) L4 type: Unknown
Tunnel type: GRENAT
Inner L2 type: ETHER
- Inner L3 type: Unkown
+ Inner L3 type: Unknown
Inner L4 type: Unknown
Send IPV6+NVGRE+MAC+IPv4 fragment packet and verify inner and outer L2/L3/L4
@@ -722,7 +720,7 @@ Send IPv4+GRE+IPv4+ICMP packet and verify inner and outer L2/L3/L4 corrected::
Send IPv4+GRE packet and verify inner and outer L2/L3/L4 corrected::
sendp([Ether()/IP()/GRE()/Raw('x'*40)], iface=txItf)
- Inner L3 type: Unkown
+ Inner L3 type: Unknown
Inner L4 type: Unknown
Test Case: Vxlan tunnel packet type detect
@@ -732,7 +730,7 @@ Fortville.
Fortville did not distinguish GRE/Teredo/Vxlan packets, all those types
will be displayed as GRENAT.
-Add vxlan tunnle port filter on receive port::
+Add vxlan tunnel port filter on receive port::
rx_vxlan_port add 4789 0
Send IPv4+Vxlan+MAC+IPv4 fragment packet and verify inner and outer L2/L3/L4
corrected::
@@ -820,7 +818,7 @@ corrected::
Send IPv4+Vxlan+MAC+IPv6+ICMP packet and verify inner and outer L2/L3/L4
corrected::
- sendp([Ether()/IP()/UDP()/Vxlan()/Ether()/IPv6(nh=28)/ICMP()/
+ sendp([Ether()/IP()/UDP()/Vxlan()/Ether()/IPv6(nh=58)/ICMP()/
Raw('\0'*40)], iface=txItf)
Inner L4 type: ICMP
@@ -828,5 +826,5 @@ corrected::
Send IPv4+Vxlan+MAC packet and verify inner and outer L2/L3/L4 corrected::
sendp([Ether()/IP()/UDP()/Vxlan()/Ether()/Raw('\0'*40)], iface=txItf)
- Inner L3 type: Unkown
+ Inner L3 type: Unknown
Inner L4 type: Unknown
--
1.9.3
next prev parent reply other threads:[~2015-09-17 1:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-17 1:07 [dts] [dts 0/4] " Yufen Mo
2015-09-17 1:07 ` Yufen Mo [this message]
2015-09-17 1:07 ` [dts] [dts 2/4] " Yufen Mo
2015-09-17 1:07 ` [dts] [dts 3/4] add unified packet type module and test suite unified packet type flag feature on different NICs. For more details, please reference to test plan Yufen Mo
2015-09-17 1:22 ` Mo, YufengX
2015-09-17 1:07 ` [dts] [dts 4/4] add unified packet type module and test suite Yufen Mo
2015-09-17 1:13 [dts] [dts 0/4] " Yufen Mo
2015-09-17 1:13 ` [dts] [dts 1/4] " Yufen Mo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442452074-4148-2-git-send-email-yufengx.mo@intel.com \
--to=yufengx.mo@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).