[dts] [V1 1/5] update case execute sequence for 10G nic

[dts] [V1 1/5] update case execute sequence for 10G nic

[xu,huilong]

Signed-off-by: xu,huilong <huilongx.xu@intel.com>
---
 executions/execution.cfg | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/executions/execution.cfg b/executions/execution.cfg
index 20d9bd6..5daf2df 100644
--- a/executions/execution.cfg
+++ b/executions/execution.cfg
@@ -2,6 +2,7 @@
 crbs=<CRB IP Address>
 drivername=<driver name igb_uio or vfio-pci>
 test_suites=
+    scatter,
     cmdline,
     hello_world,
     multiprocess,
@@ -22,10 +23,8 @@ test_suites=
     shutdown_api,
     fdir,
     ipv4_reassembly,
-    scatter,
     pmdrssreta,
     pmd,
-    l2fwd,
     kni 
 targets=
     x86_64-native-linuxapp-gcc
-- 
1.9.3

[dts] [V1 2/5] update case execute sequence for 40G nic

[xu,huilong]

Signed-off-by: xu,huilong <huilongx.xu@intel.com>
---
 executions/execution_FVL.cfg | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/executions/execution_FVL.cfg b/executions/execution_FVL.cfg
index 7bdd2b7..f967edc 100644
--- a/executions/execution_FVL.cfg
+++ b/executions/execution_FVL.cfg
@@ -2,6 +2,7 @@
 crbs=<CRB IP Address>
 drivername=<driver name igb_uio or vfio-pci>
 test_suites=
+    scatter,
     checksum_offload,
     dynamic_config,
     generic_filter,
@@ -13,17 +14,14 @@ test_suites=
     fdir,
     nvgre,
     vxlan,
-    vxlan_sample,
     pmd,
     ipfrag,
     timer,
     jumboframes,
     multiprocess,
-    l2fwd,
     whitelist,
     blacklist,
     ipv4_reassembly,
-    scatter,
     pmdrssreta,
     pmdrss_hash,
     ieee1588,
-- 
1.9.3

[dts] [V1 3/5] update case execute sequence for rxmode test

[xu,huilong]

Signed-off-by: xu,huilong <huilongx.xu@intel.com>
---
 executions/execution_rxmode.cfg | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/executions/execution_rxmode.cfg b/executions/execution_rxmode.cfg
index cf46dbf..36e1b14 100644
--- a/executions/execution_rxmode.cfg
+++ b/executions/execution_rxmode.cfg
@@ -3,9 +3,9 @@ crbs=<CRB IP Address>
 drivername=igb_uio
 rx_mode=scalar
 test_suites=
+    scatter,
     fdir,
     jumboframes,
-    scatter,
     ieee1588,
     checksum_offload,
     link_flowctrl,
@@ -24,9 +24,9 @@ crbs=<CRB IP Address>
 drivername=igb_uio
 rx_mode=full
 test_suites=
+    scatter,
     fdir,
     jumboframes,
-    scatter,
     ieee1588,
     checksum_offload,
     link_flowctrl,
@@ -45,9 +45,9 @@ crbs=<CRB IP Address>
 drivername=igb_uio
 rx_mode=vector
 test_suites=
+    scatter,
     fdir,
     jumboframes,
-    scatter,
     ieee1588,
     checksum_offload,
     link_flowctrl,
-- 
1.9.3

[dts] [V1 4/5] update case execute sequence for smock test

[xu,huilong]

Signed-off-by: xu,huilong <huilongx.xu@intel.com>
---
 executions/execution_smoke.cfg | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/executions/execution_smoke.cfg b/executions/execution_smoke.cfg
index 7631f5c..04d5f91 100644
--- a/executions/execution_smoke.cfg
+++ b/executions/execution_smoke.cfg
@@ -2,6 +2,15 @@
 crbs=<CRB IP Address>
 drivername=<driver name igb_uio or vfio-pci>
 test_suites=
+    scatter,
+    dynamic_config,
+    jumboframes,
+    ieee1588,
+    multiprocess,
+    pmd,
+    checksum_offload,
+    whitelist,
+    blacklist,
     unit_tests_cmdline,
     unit_tests_eal,
     unit_tests_dump,
@@ -15,17 +24,7 @@ test_suites=
     unit_tests_qos,
     unit_tests_ring,
     unit_tests_ringpmd,
-    unit_tests_timer,
-    dynamic_config,
-    jumboframes,
-    scatter,
-    ieee1588,
-    multiprocess,
-    l2fwd,
-    pmd,
-    checksum_offload,
-    whitelist,
-    blacklist
+    unit_tests_timer
 targets=
     x86_64-native-linuxapp-gcc
 parameters=nic_type=niantic:func=true
-- 
1.9.3

[dts] [V1 5/5] add time for multiprocess app setup

[xu,huilong]

Signed-off-by: xu,huilong <huilongx.xu@intel.com>
---
 tests/TestSuite_multiprocess.py | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tests/TestSuite_multiprocess.py b/tests/TestSuite_multiprocess.py
index 6365892..ed96f6b 100644
--- a/tests/TestSuite_multiprocess.py
+++ b/tests/TestSuite_multiprocess.py
@@ -90,9 +90,9 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
         out = self.dut.alt_session.send_expect("cat out","# ")
         self.verify("Received 'hello_primary'" in out, "Message not received on primary process")
         # Send message from primary to secondary
-        self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary " % self.target, "Finished Process Init", 10)
+        self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary " % self.target, "Finished Process Init", 100)
         time.sleep(20)
-        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary | tee out  " % self.target, "Finished Process Init", 10)
+        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary | tee out  " % self.target, "Finished Process Init", 100)
         self.dut.alt_session.send_expect("send hello_secondary", ">")
         self.dut.alt_session.send_expect("quit", "# ")
         self.dut.send_expect("quit", "# ")
@@ -109,9 +109,9 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
         self.dut.kill_all()
         self.dut.send_expect("fg", "# ")
 
-        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary > testing.txt &" % self.target, "# ")
+        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary > testing.txt &" % self.target, "# ", 100)
         time.sleep(20)
-        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary" % self.target, "Finished Process Init", 10)
+        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary" % self.target, "Finished Process Init", 100)
         stringsSent = 0
         for line in open('/usr/share/dict/words', 'r').readlines():
             line = line.split('\n')[0]
@@ -132,7 +132,7 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
         self.dut.kill_all()
 
         # Send message from secondary to primary (auto process type)
-        self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto |tee out " % self.target, "Finished Process Init", 30)
+        self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto |tee out " % self.target, "Finished Process Init", 100)
         time.sleep(20)
         out = self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=auto" % self.target, "Finished Process Init", 30)
         self.verify("EAL: Auto-detected process type: SECONDARY" in out,
@@ -147,9 +147,9 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
         self.verify("Received 'hello_primary'" in out, "Message not received on primary process")
 
         # Send message from primary to secondary (auto process type)
-        out = self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto |tee out_primary " % self.target, "Finished Process Init", 30)
+        out = self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto |tee out_primary " % self.target, "Finished Process Init", 100)
         time.sleep(20)
-        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=auto |tee out_secondary " % self.target, "Finished Process Init", 30)
+        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=auto |tee out_secondary " % self.target, "Finished Process Init", 100)
         self.dut.alt_session.send_expect("send hello_secondary", ">",100)
         self.dut.alt_session.send_expect("quit", "# ")
         self.dut.send_expect("quit", "# ")
@@ -167,8 +167,8 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
         """
 
         self.dut.kill_all()
-        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 -m 64 &" % self.target, "Finished Process Init", 20)
-        out = self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C" % self.target, "# ")
+        self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 -m 64 &" % self.target, "Finished Process Init", 100)
+        out = self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C" % self.target, "# ", 100)
 
         self.verify("Is another primary process running" in out,
                     "No other primary process detected")
-- 
1.9.3

Re: [dts] [V1 1/5] update case execute sequence for 10G nic

[Liu, Yong]

Huilong,
Why do you change the sequence of suite execution? Is there any special reason to run scatter as the first one?

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,huilong
> Sent: Tuesday, October 20, 2015 10:12 AM
> To: dts@dpdk.org
> Subject: [dts] [V1 1/5] update case execute sequence for 10G nic
> 
> Signed-off-by: xu,huilong <huilongx.xu@intel.com>
> ---
>  executions/execution.cfg | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/executions/execution.cfg b/executions/execution.cfg
> index 20d9bd6..5daf2df 100644
> --- a/executions/execution.cfg
> +++ b/executions/execution.cfg
> @@ -2,6 +2,7 @@
>  crbs=<CRB IP Address>
>  drivername=<driver name igb_uio or vfio-pci>
>  test_suites=
> +    scatter,
>      cmdline,
>      hello_world,
>      multiprocess,
> @@ -22,10 +23,8 @@ test_suites=
>      shutdown_api,
>      fdir,
>      ipv4_reassembly,
> -    scatter,
>      pmdrssreta,
>      pmd,
> -    l2fwd,
>      kni
>  targets=
>      x86_64-native-linuxapp-gcc
> --
> 1.9.3

Re: [dts] [V1 1/5] update case execute sequence for 10G nic

[Xu, HuilongX]

Hi yong,
Yes, sometimes scatter will failed in daily test, but when we debug, it passed, if only run scatter.

> -----Original Message-----
> From: Liu, Yong
> Sent: Tuesday, October 20, 2015 10:30 AM
> To: Xu, HuilongX; dts@dpdk.org
> Subject: RE: [dts] [V1 1/5] update case execute sequence for 10G nic
> 
> Huilong,
> Why do you change the sequence of suite execution? Is there any special
> reason to run scatter as the first one?
> 
> > -----Original Message-----
> > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,huilong
> > Sent: Tuesday, October 20, 2015 10:12 AM
> > To: dts@dpdk.org
> > Subject: [dts] [V1 1/5] update case execute sequence for 10G nic
> >
> > Signed-off-by: xu,huilong <huilongx.xu@intel.com>
> > ---
> >  executions/execution.cfg | 3 +--
> >  1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/executions/execution.cfg b/executions/execution.cfg
> > index 20d9bd6..5daf2df 100644
> > --- a/executions/execution.cfg
> > +++ b/executions/execution.cfg
> > @@ -2,6 +2,7 @@
> >  crbs=<CRB IP Address>
> >  drivername=<driver name igb_uio or vfio-pci>
> >  test_suites=
> > +    scatter,
> >      cmdline,
> >      hello_world,
> >      multiprocess,
> > @@ -22,10 +23,8 @@ test_suites=
> >      shutdown_api,
> >      fdir,
> >      ipv4_reassembly,
> > -    scatter,
> >      pmdrssreta,
> >      pmd,
> > -    l2fwd,
> >      kni
> >  targets=
> >      x86_64-native-linuxapp-gcc
> > --
> > 1.9.3

Re: [dts] [V1 1/5] update case execute sequence for 10G nic

[Liu, Yong]

Huilong, we should figure out the root cause of scatter case for not only us run DTS by now.

> -----Original Message-----
> From: Xu, HuilongX
> Sent: Tuesday, October 20, 2015 10:40 AM
> To: Liu, Yong; dts@dpdk.org
> Subject: RE: [dts] [V1 1/5] update case execute sequence for 10G nic
> 
> Hi yong,
> Yes, sometimes scatter will failed in daily test, but when we debug, it
> passed, if only run scatter.
> 
> > -----Original Message-----
> > From: Liu, Yong
> > Sent: Tuesday, October 20, 2015 10:30 AM
> > To: Xu, HuilongX; dts@dpdk.org
> > Subject: RE: [dts] [V1 1/5] update case execute sequence for 10G nic
> >
> > Huilong,
> > Why do you change the sequence of suite execution? Is there any special
> > reason to run scatter as the first one?
> >
> > > -----Original Message-----
> > > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,huilong
> > > Sent: Tuesday, October 20, 2015 10:12 AM
> > > To: dts@dpdk.org
> > > Subject: [dts] [V1 1/5] update case execute sequence for 10G nic
> > >
> > > Signed-off-by: xu,huilong <huilongx.xu@intel.com>
> > > ---
> > >  executions/execution.cfg | 3 +--
> > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > >
> > > diff --git a/executions/execution.cfg b/executions/execution.cfg
> > > index 20d9bd6..5daf2df 100644
> > > --- a/executions/execution.cfg
> > > +++ b/executions/execution.cfg
> > > @@ -2,6 +2,7 @@
> > >  crbs=<CRB IP Address>
> > >  drivername=<driver name igb_uio or vfio-pci>
> > >  test_suites=
> > > +    scatter,
> > >      cmdline,
> > >      hello_world,
> > >      multiprocess,
> > > @@ -22,10 +23,8 @@ test_suites=
> > >      shutdown_api,
> > >      fdir,
> > >      ipv4_reassembly,
> > > -    scatter,
> > >      pmdrssreta,
> > >      pmd,
> > > -    l2fwd,
> > >      kni
> > >  targets=
> > >      x86_64-native-linuxapp-gcc
> > > --
> > > 1.9.3