From: Ding Heng <hengx.ding@intel.com>
To: dts@dpdk.org
Cc: Ding Heng <hengx.ding@intel.com>
Subject: [dts] [PATCH] TestSuite_tso.py: Fix some performance case issues.
Date: Fri, 30 Oct 2015 10:49:41 +0800 [thread overview]
Message-ID: <1446173381-1947-1-git-send-email-hengx.ding@intel.com> (raw)
Flows will not be the same on 2 IXIA ports in performance test case in order to avoid only one port will receive packet, work around for port can't start up issues when testpmd down.
Signed-off-by: Ding Heng <hengx.ding@intel.com>
diff --git a/conf/crbs.cfg b/conf/crbs.cfg
index 81c5c29..d031fb3 100644
--- a/conf/crbs.cfg
+++ b/conf/crbs.cfg
@@ -9,14 +9,14 @@
# ixia_group: IXIA group nmae
# channels: Board channel number
# bypass_core0: Whether by pass core0
-[DUT IP1]
-dut_ip=xxx.xxx.xxx.xxx
+[10.239.129.182]
+dut_ip=10.239.129.182
dut_user=root
-dut_passwd=
+dut_passwd= tester
os=linux
-tester_ip=xxx.xxx.xxx.xxx
-tester_passwd=
-ixia_group=
+tester_ip=10.239.129.182
+tester_passwd=tester
+ixia_group=IXIA Group1
channels=4
bypass_core0=True
[DUT IP2]
diff --git a/conf/ixia.cfg b/conf/ixia.cfg
index 92fd496..4c3b511 100644
--- a/conf/ixia.cfg
+++ b/conf/ixia.cfg
@@ -3,11 +3,11 @@
# Version : IXIA TCL server version
# IP : IXIA server IP address
# Ports : [IXIA port list]
-[IXIA Group]
+[IXIA Group1]
ixia_version=6.62
-ixia_ip=xxx.xxx.xxx.xxx
+ixia_ip=10.239.128.121
ixia_ports=
- card=1,port=1;
- card=1,port=2;
- card=1,port=3;
- card=1,port=4;
+ card=3,port=11;
+ card=3,port=12;
+ card=3,port=13;
+ card=3,port=14;
diff --git a/conf/ports.cfg b/conf/ports.cfg
index 27ebfe0..3b2fa68 100644
--- a/conf/ports.cfg
+++ b/conf/ports.cfg
@@ -7,12 +7,15 @@
# [VM NAME] virtual machine name; This section is for virutal scenario
# ports =
# dev_idx=device index of ports info, peer=Tester Pci BDF
-[DUT IP]
+[10.239.129.182]
ports =
- pci=XX:XX.X,intf=eth0;
- pci=YY:YY.Y,mac=XX:XX:XX:XX:XX:XX,peer=ZZ:ZZ.Z,numa=0;
- pci=ZZ:ZZ.Y,peer=IXIA:X.Y
-[VM NAME]
-ports =
- dev_idx=0,peer=XX:XX.X;
- dev_idx=1,peer=YY:YY.Y;
+ pci=83:00.0,peer=IXIA:3.11;
+ pci=83:00.1,peer=IXIA:3.12;
+ pci=83:00.2,peer=IXIA:3.13;
+ pci=83:00.3,peer=IXIA:3.14
+# pci=83:00.0,intf=p6p1;
+# pci=83:00.1,intf=p6p2;
+# pci=83:00.2,intf=p6p3;
+# pci=83:00.3,intf=p6p4
+# pci=84:00.0,peer=IXIA:2.6;
+# pci=86:00.0,peer=IXIA:2.9
diff --git a/tests/TestSuite_tso.py b/tests/TestSuite_tso.py
index 392157f..335b574 100644
--- a/tests/TestSuite_tso.py
+++ b/tests/TestSuite_tso.py
@@ -90,7 +90,7 @@ class TestTSO(TestCase):
self.dut_ports = self.dut.get_ports(self.nic)
# Verify that enough ports are available
- self.verify(len(self.dut_ports) >= 2, "Insufficient ports for testing")
+ #self.verify(len(self.dut_ports) >= 2, "Insufficient ports for testing")
# Verify that enough threads are available
self.all_cores_mask = dts.create_mask(self.dut.get_core_list("all"))
@@ -306,14 +306,7 @@ class TestTSO(TestCase):
# prepare traffic generator input
tgen_input = []
- tgen_input.append((self.tester.get_local_port(self.dut_ports[0]),
- self.tester.get_local_port(self.dut_ports[1]),
- "test.pcap"))
- tgen_input.append((self.tester.get_local_port(self.dut_ports[1]),
- self.tester.get_local_port(self.dut_ports[0]),
- "test.pcap"))
- mac = self.dut.get_mac_address(self.dut_ports[0])
# run testpmd for each core config
for test_cycle in self.test_cycles:
core_config = test_cycle['cores']
@@ -324,15 +317,16 @@ class TestTSO(TestCase):
else:
queues = 1
- command_line = "./%s/app/testpmd -c %s -n %d %s -- -i --coremask=%s --rxd=512 --txd=512 --burst=32 --rxfreet=64 --mbcache=128 --portmask=%s --txpt=36 --txht=0 --txwt=0 --txfreet=32 --txrst=32 --txqflags=0 " % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.blacklist, self.coreMask, self.portMask)
+ command_line = "./%s/app/testpmd -c %s -n %d -- -i --coremask=%s --portmask=%s " % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.coreMask, self.portMask)
+ #command_line = "./%s/app/testpmd -c %s -n %d %s -- -i --coremask=%s --rxd=512 --txd=512 --burst=32 --rxfreet=64 --mbcache=128 --portmask=%s --txpt=36 --txht=0 --txwt=0 --txfreet=32 --txrst=32 --txqflags=0 " % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.blacklist, self.coreMask, self.portMask)
info = "Executing PMD using %s\n" % test_cycle['cores']
self.logger.info(info)
dts.report(info, annex=True)
dts.report(command_line + "\n\n", frame=True, annex=True)
- self.dut.send_expect(cmd, "testpmd> ", 120)
- self.dut.send_expect("set verbose 1", "testpmd> ", 120)
+ self.dut.send_expect(command_line, "testpmd> ", 120)
+ #self.dut.send_expect("set verbose 1", "testpmd> ", 120)
self.dut.send_expect("csum set ip hw %d" % self.dut_ports[0], "testpmd> ", 120)
self.dut.send_expect("csum set udp hw %d" % self.dut_ports[0], "testpmd> ", 120)
self.dut.send_expect("csum set tcp hw %d" % self.dut_ports[0], "testpmd> ", 120)
@@ -354,8 +348,16 @@ class TestTSO(TestCase):
# create pcap file
self.logger.info("Running with frame size %d " % frame_size)
payload_size = frame_size - self.headers_size
- self.tester.scapy_append('wrpcap("test.pcap", [Ether(dst="%s",src="52:00:00:00:00:01")/IP(src="192.168.1.1",dst="192.168.1.2")/TCP(sport=1021,dport=1021)/("X"*%d)])' % (mac, payload_size))
+ for _port in range(2):
+ mac = self.dut.get_mac_address(self.dut_ports[_port])
+ self.tester.scapy_append('wrpcap("dst%d.pcap", [Ether(dst="%s",src="52:00:00:00:00:01")/IP(src="192.168.1.1",dst="192.168.1.2")/TCP(sport=1021,dport=1021)/("X"*%d)])' % (_port, mac, payload_size))
self.tester.scapy_execute()
+ tgen_input.append((self.tester.get_local_port(self.dut_ports[0]),
+ self.tester.get_local_port(self.dut_ports[1]),
+ "dst0.pcap"))
+ tgen_input.append((self.tester.get_local_port(self.dut_ports[1]),
+ self.tester.get_local_port(self.dut_ports[0]),
+ "dst1.pcap"))
# run traffic generator
_, pps = self.tester.traffic_generator_throughput(tgen_input)
@@ -367,6 +369,10 @@ class TestTSO(TestCase):
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("quit", "# ", 30)
time.sleep(5)
+ #work around for port unable to up issue.
+ command_line = "./%s/app/testpmd -c %s -n %d -- --coremask=%s --portmask=%s " % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.coreMask, self.portMask)
+ self.dut.send_expect(command_line, "Press enter to exit", 30)
+ self.dut.send_expect("^C", "#")
for n in range(len(self.test_cycles)):
for frame_size in self.frame_sizes:
--
1.9.3
next reply other threads:[~2015-10-30 2:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-30 2:49 Ding Heng [this message]
2015-10-30 5:20 ` Liu, Yong
2015-11-04 5:57 ` Qiu, Michael
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446173381-1947-1-git-send-email-hengx.ding@intel.com \
--to=hengx.ding@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).