* [dts] [PATCH 1/6] framework tester: NIC object get from net_device module
@ 2016-01-11 7:05 Yong Liu
2016-01-11 7:05 ` [dts] [PATCH 2/6] framework packet: only sniff coming packet when tcpdump support Yong Liu
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Yong Liu @ 2016-01-11 7:05 UTC (permalink / raw)
To: dts
All nic object should get from net device module. If object has been
initalized, there's no need to re-instantiated it.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
diff --git a/framework/tester.py b/framework/tester.py
index c8cebd6..d3dab04 100644
--- a/framework/tester.py
+++ b/framework/tester.py
@@ -37,7 +37,7 @@ import re
from time import sleep
from settings import NICS
from crb import Crb
-from net_device import NetDevice
+from net_device import GetNicObj
from etgen import IxiaPacketGenerator, SoftwarePacketGenerator
from settings import IXIA
import random
@@ -201,7 +201,7 @@ class Tester(Crb):
try:
for (pci_bus, pci_id) in self.pci_devices_info:
addr_array = pci_bus.split(':')
- port = NetDevice(self, addr_array[0], addr_array[1])
+ port = GetNicObj(self, addr_array[0], addr_array[1])
itf = port.get_interface_name()
self.enable_ipv6(itf)
self.send_expect("ifconfig %s up" % itf, "# ")
@@ -266,7 +266,7 @@ class Tester(Crb):
if port_info['type'] == 'ixia':
continue
- port = NetDevice(self, port_info['pci'], port_info['type'])
+ port = GetNicObj(self, port_info['pci'], port_info['type'])
intf = port.get_interface_name()
self.logger.info("Tester cached: [000:%s %s] %s" % (
@@ -290,7 +290,7 @@ class Tester(Crb):
bus_id = addr_array[0]
devfun_id = addr_array[1]
- port = NetDevice(self, bus_id, devfun_id)
+ port = GetNicObj(self, bus_id, devfun_id)
intf = port.get_interface_name()
if "No such file" in intf:
@@ -496,7 +496,7 @@ class Tester(Crb):
pkt = pkt_c(pkt_type=pkt_type,
pkt_len=random.randint(64, 1514),
ran_payload=True)
- # config packet if has parameters
+
if params and len(portList) == len(params):
for param in params:
layer, config = param
--
1.9.3
^ permalink raw reply [flat|nested] 9+ messages in thread* [dts] [PATCH 2/6] framework packet: only sniff coming packet when tcpdump support 2016-01-11 7:05 [dts] [PATCH 1/6] framework tester: NIC object get from net_device module Yong Liu @ 2016-01-11 7:05 ` Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 3/6] framework pmd_output: support quit command of testpmd Yong Liu ` (3 subsequent siblings) 4 siblings, 0 replies; 9+ messages in thread From: Yong Liu @ 2016-01-11 7:05 UTC (permalink / raw) To: dts Newer version tcpdump support capture packet by direction. This feature will help us distinguish coming packets and outgoing packets. And will be helpful when only one nic available on tester. Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/framework/packet.py b/framework/packet.py index 6d16a9e..aaa1dd0 100755 --- a/framework/packet.py +++ b/framework/packet.py @@ -639,8 +639,20 @@ def sniff_packets(intf, count=0, timeout=5): """ sniff all packets for certain port in certain seconds """ - sniff_cmd = 'tcpdump -i %(INTF)s -w %(FILE)s' - options = {'INTF': intf, 'COUNT': count, + param = "" + direct_param = r"(\s+)\[ -(\w) in\|out\|inout \]" + tcpdump_help = subprocess.check_output("tcpdump -h; echo 0", + stderr=subprocess.STDOUT, shell=True) + for line in tcpdump_help.split('\n'): + m = re.match(direct_param, line) + if m: + param = "-" + m.group(2) + " in" + + if len(param) == 0: + print "tcpdump not support direction chioce!!!" + + sniff_cmd = 'tcpdump -i %(INTF)s %(IN_PARAM)s -w %(FILE)s' + options = {'INTF': intf, 'COUNT': count, 'IN_PARAM': param, 'FILE': '/tmp/sniff_%s.pcap' % intf} if count: sniff_cmd += ' -c %(COUNT)d' -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts] [PATCH 3/6] framework pmd_output: support quit command of testpmd 2016-01-11 7:05 [dts] [PATCH 1/6] framework tester: NIC object get from net_device module Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 2/6] framework packet: only sniff coming packet when tcpdump support Yong Liu @ 2016-01-11 7:05 ` Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan Yong Liu ` (2 subsequent siblings) 4 siblings, 0 replies; 9+ messages in thread From: Yong Liu @ 2016-01-11 7:05 UTC (permalink / raw) To: dts Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/framework/pmd_output.py b/framework/pmd_output.py index 47cd7c7..df8db12 100644 --- a/framework/pmd_output.py +++ b/framework/pmd_output.py @@ -206,3 +206,6 @@ class PmdOutput(): vlan_info['qinq'] = self.get_detail_from_port_info( 'qinq\(extend\) ', '\S+', port_id) return vlan_info + + def quit(self): + self.dut.send_expect("quit", "# ") -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan 2016-01-11 7:05 [dts] [PATCH 1/6] framework tester: NIC object get from net_device module Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 2/6] framework packet: only sniff coming packet when tcpdump support Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 3/6] framework pmd_output: support quit command of testpmd Yong Liu @ 2016-01-11 7:05 ` Yong Liu 2016-01-18 1:30 ` Xu, Qian Q 2016-01-11 7:05 ` [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 6/6] conf vf_vlan: add configuration file for VF vlan Yong Liu 4 siblings, 1 reply; 9+ messages in thread From: Yong Liu @ 2016-01-11 7:05 UTC (permalink / raw) To: dts Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/test_plans/vf_vlan_test_plan.rst b/test_plans/vf_vlan_test_plan.rst new file mode 100644 index 0000000..24ae1fc --- /dev/null +++ b/test_plans/vf_vlan_test_plan.rst @@ -0,0 +1,186 @@ +.. Copyright (c) <2015>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + + +The support of VLAN offload features by VF device consists in: + +- the filtering of received VLAN packets +- VLAN header stripping by hardware in received [VLAN] packets +- VLAN header insertion by hardware in transmitted packets + +Prerequisites +============= +1. Create VF device from PF devices. + ./dpdk_nic_bind.py --st + 0000:87:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused= + 0000:87:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused= + + echo 1 > /sys/bus/pci/devices/0000\:87\:00.0/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000\:87\:00.1/sriov_numvfs + + ./dpdk_nic_bind.py --st + + 0000:87:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused= + 0000:87:02.0 'XL710/X710 Virtual Function' unused= + 0000:87:0a.0 'XL710/X710 Virtual Function' unused= + +2. Detach VFs from the host, bind them to pci-stub driver, + + /sbin/modprobe pci-stub + + using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c", + + echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id + echo 0000:87:02.0 > /sys/bus/pci/devices/0000:87:02.0/driver/unbind + echo 0000:87:02.0 > /sys/bus/pci/drivers/pci-stub/bind + + echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id + echo 0000:87:0a.0 > /sys/bus/pci/devices/0000:87:0a.0/driver/unbind + echo 0000:87:0a.0 > /sys/bus/pci/drivers/pci-stub/bind + +3. Passthrough VFs 87:02.0 & 87:02.1 to vm0 and start vm0, + + /usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \ + -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \ + -device pci-assign,host=87:02.0,id=pt_0 \ + -device pci-assign,host=87:0a.0,id=pt_1 + +4. Login vm0 and them bind VF devices to igb_uio driver. + + ./tools/dpdk_nic_bind.py --bind=igb_uio 00:04.0 00:05.0 + +5. Start testpmd, set it in rxonly mode and enable verbose output + testpmd -c 0x0f -n 4 -w 00:04.0 -w 00:05.0 -- -i --portmask=0x3 --txqflags=0 + testpmd> set fwd rxonly + testpmd> set verbose 1 + testpmd> start + +Test Case 1: VF Port based vlan rx +================================== +Linux network configration tool only set pvid on VF devices. + +1. Add pvid on VF0 from PF device + ip link set $PF_INTF vf 0 vlan 2 + +2. Send packet with same vlan id and check VF can receive + +3. Send packet without vlan and check VF can't receive + +4. Send packet with wrong and check Vf can't receive + +5. Check pf device show correct pvid setting + ip link show ens259f0 + ... + vf 0 MAC 00:00:00:00:00:00, vlan 1, spoof checking on, link-state auto + +7. Remove added vlan from PF device + ip link set $PF_INTF vf 0 vlan 0 + +8. Restart testpmd and send packet without vlan and check VF can receive + +9. Set packet with vlan id 0 and check VF can receive + +10. Set packet with random id 1-4095 and check VF can't receive + +Test Case 2: VF port based vlan tx +================================== +1. Add pvid on VF0 from PF device + ip link set $PF_INTF vf 0 vlan 2 + +2. Start testpmd with mac forward mode + testpmd> set fwd mac + testpmd> start + +3. Send packet from tester port1 and check packet recevied by tester port0 + Check port1 recevied packet with configured vlan 2 + +Test Case 3: VF tagged vlan tx +=============================== +1. Start testpmd with full-featured tx code path and with mac forward mode + testpmd -c f -n 3 -- -i --txqflags=0x0 + testpmd> set fwd mac + testpmd> start + +2. Add tx vlan offload on VF0, take care the first param is port + testpmd> tx_vlan 0 1 + +3. Send packet from tester port1 and check packet recevied by tester port0 + Check port- recevied packet with configured vlan 1 + +Test case4: VF tagged vlan rx +============================= +1. Make sure port based vlan disabled on VF0 and VF1 +2. Start testpmd with rxonly mode + testpmd> set fwd rxonly + testpmd> set verbose 1 + testpmd> start + +3. Send packet without vlan and check packet received + +4. Send packet with vlan 0 and check packet received + +5. Add vlan on VF0 from VF driver + testpmd> rx_vlan add 1 0 + +6. Send packet with vlan0/1 and check packet received +(set vlan filter off still can't recevied, need return error) + +7. Remove vlan on VF0 + rx_vlan rm 1 0 + +8. Send packet with vlan 0 and check packet received + +9. Send packet without vlan and check packet received + +10. Send packe with vlan 1 and check packet can't recevied + +Test case5: VF Vlan strip test +============================== +1. Start testpmd with mac forward mode + testpmd> set fwd mac + testpmd> set verbose 1 + testpmd> start + +2. Add tagged vlan 1 on VF0 + testpmd> rx_vlan add 1 0 + +3. Disable VF0 vlan strip and sniff packet on tester port1 + testpmd> vlan set strip off 0 + +4. set packet from tester port0 with vlan 1 and check sniffed packet has vlan + +5. enable vlan strip on VF0 and sniff packet on tester port1 + testpmd> vlan set strip on 0 + +6. send packet from tester port0 with vlan 1 and check sniffed packet without vlan + +7. send packet from tester port0 with vlan 0 and check sniffed packet without vlan -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan 2016-01-11 7:05 ` [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan Yong Liu @ 2016-01-18 1:30 ` Xu, Qian Q 2016-01-18 7:48 ` Liu, Yong 0 siblings, 1 reply; 9+ messages in thread From: Xu, Qian Q @ 2016-01-18 1:30 UTC (permalink / raw) To: Liu, Yong, dts How about the boundary testing, we may need test VLAN ID=4095, 4096? Thanks Qian -----Original Message----- From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yong Liu Sent: Monday, January 11, 2016 3:06 PM To: dts@dpdk.org Subject: [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/test_plans/vf_vlan_test_plan.rst b/test_plans/vf_vlan_test_plan.rst new file mode 100644 index 0000000..24ae1fc --- /dev/null +++ b/test_plans/vf_vlan_test_plan.rst @@ -0,0 +1,186 @@ +.. Copyright (c) <2015>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + + +The support of VLAN offload features by VF device consists in: + +- the filtering of received VLAN packets +- VLAN header stripping by hardware in received [VLAN] packets +- VLAN header insertion by hardware in transmitted packets + +Prerequisites +============= +1. Create VF device from PF devices. + ./dpdk_nic_bind.py --st + 0000:87:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused= + 0000:87:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 +drv=i40e unused= + + echo 1 > /sys/bus/pci/devices/0000\:87\:00.0/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000\:87\:00.1/sriov_numvfs + + ./dpdk_nic_bind.py --st + + 0000:87:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused= + 0000:87:02.0 'XL710/X710 Virtual Function' unused= + 0000:87:0a.0 'XL710/X710 Virtual Function' unused= + +2. Detach VFs from the host, bind them to pci-stub driver, + + /sbin/modprobe pci-stub + + using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 +154c", + + echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id + echo 0000:87:02.0 > /sys/bus/pci/devices/0000:87:02.0/driver/unbind + echo 0000:87:02.0 > /sys/bus/pci/drivers/pci-stub/bind + + echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id + echo 0000:87:0a.0 > /sys/bus/pci/devices/0000:87:0a.0/driver/unbind + echo 0000:87:0a.0 > /sys/bus/pci/drivers/pci-stub/bind + +3. Passthrough VFs 87:02.0 & 87:02.1 to vm0 and start vm0, + + /usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \ + -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \ + -device pci-assign,host=87:02.0,id=pt_0 \ + -device pci-assign,host=87:0a.0,id=pt_1 + +4. Login vm0 and them bind VF devices to igb_uio driver. + + ./tools/dpdk_nic_bind.py --bind=igb_uio 00:04.0 00:05.0 + +5. Start testpmd, set it in rxonly mode and enable verbose output + testpmd -c 0x0f -n 4 -w 00:04.0 -w 00:05.0 -- -i --portmask=0x3 --txqflags=0 + testpmd> set fwd rxonly + testpmd> set verbose 1 + testpmd> start + +Test Case 1: VF Port based vlan rx +================================== +Linux network configration tool only set pvid on VF devices. + +1. Add pvid on VF0 from PF device + ip link set $PF_INTF vf 0 vlan 2 + +2. Send packet with same vlan id and check VF can receive + +3. Send packet without vlan and check VF can't receive + +4. Send packet with wrong and check Vf can't receive + +5. Check pf device show correct pvid setting + ip link show ens259f0 + ... + vf 0 MAC 00:00:00:00:00:00, vlan 1, spoof checking on, link-state +auto + +7. Remove added vlan from PF device + ip link set $PF_INTF vf 0 vlan 0 + +8. Restart testpmd and send packet without vlan and check VF can +receive + +9. Set packet with vlan id 0 and check VF can receive + +10. Set packet with random id 1-4095 and check VF can't receive + +Test Case 2: VF port based vlan tx +================================== +1. Add pvid on VF0 from PF device + ip link set $PF_INTF vf 0 vlan 2 + +2. Start testpmd with mac forward mode + testpmd> set fwd mac + testpmd> start + +3. Send packet from tester port1 and check packet recevied by tester port0 + Check port1 recevied packet with configured vlan 2 + +Test Case 3: VF tagged vlan tx +=============================== +1. Start testpmd with full-featured tx code path and with mac forward mode + testpmd -c f -n 3 -- -i --txqflags=0x0 + testpmd> set fwd mac + testpmd> start + +2. Add tx vlan offload on VF0, take care the first param is port + testpmd> tx_vlan 0 1 + +3. Send packet from tester port1 and check packet recevied by tester port0 + Check port- recevied packet with configured vlan 1 + +Test case4: VF tagged vlan rx +============================= +1. Make sure port based vlan disabled on VF0 and VF1 2. Start testpmd +with rxonly mode + testpmd> set fwd rxonly + testpmd> set verbose 1 + testpmd> start + +3. Send packet without vlan and check packet received + +4. Send packet with vlan 0 and check packet received + +5. Add vlan on VF0 from VF driver + testpmd> rx_vlan add 1 0 + +6. Send packet with vlan0/1 and check packet received (set vlan filter +off still can't recevied, need return error) + +7. Remove vlan on VF0 + rx_vlan rm 1 0 + +8. Send packet with vlan 0 and check packet received + +9. Send packet without vlan and check packet received + +10. Send packe with vlan 1 and check packet can't recevied + +Test case5: VF Vlan strip test +============================== +1. Start testpmd with mac forward mode + testpmd> set fwd mac + testpmd> set verbose 1 + testpmd> start + +2. Add tagged vlan 1 on VF0 + testpmd> rx_vlan add 1 0 + +3. Disable VF0 vlan strip and sniff packet on tester port1 + testpmd> vlan set strip off 0 + +4. set packet from tester port0 with vlan 1 and check sniffed packet +has vlan + +5. enable vlan strip on VF0 and sniff packet on tester port1 + testpmd> vlan set strip on 0 + +6. send packet from tester port0 with vlan 1 and check sniffed packet +without vlan + +7. send packet from tester port0 with vlan 0 and check sniffed packet +without vlan -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan 2016-01-18 1:30 ` Xu, Qian Q @ 2016-01-18 7:48 ` Liu, Yong 0 siblings, 0 replies; 9+ messages in thread From: Liu, Yong @ 2016-01-18 7:48 UTC (permalink / raw) To: Xu, Qian Q, dts Thanks. I'll add boundary cases for vf vlan. On 01/18/2016 09:30 AM, Xu, Qian Q wrote: > How about the boundary testing, we may need test VLAN ID=4095, 4096? > > > Thanks > Qian > > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yong Liu > Sent: Monday, January 11, 2016 3:06 PM > To: dts@dpdk.org > Subject: [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan > > Signed-off-by: Marvin Liu <yong.liu@intel.com> > > diff --git a/test_plans/vf_vlan_test_plan.rst b/test_plans/vf_vlan_test_plan.rst > new file mode 100644 > index 0000000..24ae1fc > --- /dev/null > +++ b/test_plans/vf_vlan_test_plan.rst > @@ -0,0 +1,186 @@ > +.. Copyright (c) <2015>, Intel Corporation > + All rights reserved. > + > + Redistribution and use in source and binary forms, with or without > + modification, are permitted provided that the following conditions > + are met: > + > + - Redistributions of source code must retain the above copyright > + notice, this list of conditions and the following disclaimer. > + > + - Redistributions in binary form must reproduce the above copyright > + notice, this list of conditions and the following disclaimer in > + the documentation and/or other materials provided with the > + distribution. > + > + - Neither the name of Intel Corporation nor the names of its > + contributors may be used to endorse or promote products derived > + from this software without specific prior written permission. > + > + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS > + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE > + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, > + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES > + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR > + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) > + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, > + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED > + OF THE POSSIBILITY OF SUCH DAMAGE. > + > + > +The support of VLAN offload features by VF device consists in: > + > +- the filtering of received VLAN packets > +- VLAN header stripping by hardware in received [VLAN] packets > +- VLAN header insertion by hardware in transmitted packets > + > +Prerequisites > +============= > +1. Create VF device from PF devices. > + ./dpdk_nic_bind.py --st > + 0000:87:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused= > + 0000:87:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 > +drv=i40e unused= > + > + echo 1 > /sys/bus/pci/devices/0000\:87\:00.0/sriov_numvfs > + echo 1 > /sys/bus/pci/devices/0000\:87\:00.1/sriov_numvfs > + > + ./dpdk_nic_bind.py --st > + > + 0000:87:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused= > + 0000:87:02.0 'XL710/X710 Virtual Function' unused= > + 0000:87:0a.0 'XL710/X710 Virtual Function' unused= > + > +2. Detach VFs from the host, bind them to pci-stub driver, > + > + /sbin/modprobe pci-stub > + > + using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 > +154c", > + > + echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id > + echo 0000:87:02.0 > /sys/bus/pci/devices/0000:87:02.0/driver/unbind > + echo 0000:87:02.0 > /sys/bus/pci/drivers/pci-stub/bind > + > + echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id > + echo 0000:87:0a.0 > /sys/bus/pci/devices/0000:87:0a.0/driver/unbind > + echo 0000:87:0a.0 > /sys/bus/pci/drivers/pci-stub/bind > + > +3. Passthrough VFs 87:02.0 & 87:02.1 to vm0 and start vm0, > + > + /usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \ > + -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \ > + -device pci-assign,host=87:02.0,id=pt_0 \ > + -device pci-assign,host=87:0a.0,id=pt_1 > + > +4. Login vm0 and them bind VF devices to igb_uio driver. > + > + ./tools/dpdk_nic_bind.py --bind=igb_uio 00:04.0 00:05.0 > + > +5. Start testpmd, set it in rxonly mode and enable verbose output > + testpmd -c 0x0f -n 4 -w 00:04.0 -w 00:05.0 -- -i --portmask=0x3 --txqflags=0 > + testpmd> set fwd rxonly > + testpmd> set verbose 1 > + testpmd> start > + > +Test Case 1: VF Port based vlan rx > +================================== > +Linux network configration tool only set pvid on VF devices. > + > +1. Add pvid on VF0 from PF device > + ip link set $PF_INTF vf 0 vlan 2 > + > +2. Send packet with same vlan id and check VF can receive > + > +3. Send packet without vlan and check VF can't receive > + > +4. Send packet with wrong and check Vf can't receive > + > +5. Check pf device show correct pvid setting > + ip link show ens259f0 > + ... > + vf 0 MAC 00:00:00:00:00:00, vlan 1, spoof checking on, link-state > +auto > + > +7. Remove added vlan from PF device > + ip link set $PF_INTF vf 0 vlan 0 > + > +8. Restart testpmd and send packet without vlan and check VF can > +receive > + > +9. Set packet with vlan id 0 and check VF can receive > + > +10. Set packet with random id 1-4095 and check VF can't receive > + > +Test Case 2: VF port based vlan tx > +================================== > +1. Add pvid on VF0 from PF device > + ip link set $PF_INTF vf 0 vlan 2 > + > +2. Start testpmd with mac forward mode > + testpmd> set fwd mac > + testpmd> start > + > +3. Send packet from tester port1 and check packet recevied by tester port0 > + Check port1 recevied packet with configured vlan 2 > + > +Test Case 3: VF tagged vlan tx > +=============================== > +1. Start testpmd with full-featured tx code path and with mac forward mode > + testpmd -c f -n 3 -- -i --txqflags=0x0 > + testpmd> set fwd mac > + testpmd> start > + > +2. Add tx vlan offload on VF0, take care the first param is port > + testpmd> tx_vlan 0 1 > + > +3. Send packet from tester port1 and check packet recevied by tester port0 > + Check port- recevied packet with configured vlan 1 > + > +Test case4: VF tagged vlan rx > +============================= > +1. Make sure port based vlan disabled on VF0 and VF1 2. Start testpmd > +with rxonly mode > + testpmd> set fwd rxonly > + testpmd> set verbose 1 > + testpmd> start > + > +3. Send packet without vlan and check packet received > + > +4. Send packet with vlan 0 and check packet received > + > +5. Add vlan on VF0 from VF driver > + testpmd> rx_vlan add 1 0 > + > +6. Send packet with vlan0/1 and check packet received (set vlan filter > +off still can't recevied, need return error) > + > +7. Remove vlan on VF0 > + rx_vlan rm 1 0 > + > +8. Send packet with vlan 0 and check packet received > + > +9. Send packet without vlan and check packet received > + > +10. Send packe with vlan 1 and check packet can't recevied > + > +Test case5: VF Vlan strip test > +============================== > +1. Start testpmd with mac forward mode > + testpmd> set fwd mac > + testpmd> set verbose 1 > + testpmd> start > + > +2. Add tagged vlan 1 on VF0 > + testpmd> rx_vlan add 1 0 > + > +3. Disable VF0 vlan strip and sniff packet on tester port1 > + testpmd> vlan set strip off 0 > + > +4. set packet from tester port0 with vlan 1 and check sniffed packet > +has vlan > + > +5. enable vlan strip on VF0 and sniff packet on tester port1 > + testpmd> vlan set strip on 0 > + > +6. send packet from tester port0 with vlan 1 and check sniffed packet > +without vlan > + > +7. send packet from tester port0 with vlan 0 and check sniffed packet > +without vlan > -- > 1.9.3 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation 2016-01-11 7:05 [dts] [PATCH 1/6] framework tester: NIC object get from net_device module Yong Liu ` (2 preceding siblings ...) 2016-01-11 7:05 ` [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan Yong Liu @ 2016-01-11 7:05 ` Yong Liu 2016-01-18 1:37 ` Xu, Qian Q 2016-01-11 7:05 ` [dts] [PATCH 6/6] conf vf_vlan: add configuration file for VF vlan Yong Liu 4 siblings, 1 reply; 9+ messages in thread From: Yong Liu @ 2016-01-11 7:05 UTC (permalink / raw) To: dts Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py new file mode 100644 index 0000000..62fda22 --- /dev/null +++ b/tests/TestSuite_vf_vlan.py @@ -0,0 +1,362 @@ +# <COPYRIGHT_TAG> + +import re +import time + +import dts +from qemu_kvm import QEMUKvm +from test_case import TestCase +from pmd_output import PmdOutput +from packet import Packet, sniff_packets, load_sniff_packets +from settings import get_nic_name +import random + +VM_CORES_MASK = 'all' + + +class TestVfVlan(TestCase): + + def set_up_all(self): + + self.dut_ports = self.dut.get_ports(self.nic) + self.verify(len(self.dut_ports) > 1, "Insufficient ports") + self.vm0 = None + self.env_done = False + + def set_up(self): + self.setup_vm_env() + + def bind_nic_driver(self, ports, driver=""): + # modprobe vfio driver + if driver == "vfio-pci": + for port in ports: + netdev = self.dut.ports_info[port]['port'] + driver = netdev.get_nic_driver() + if driver != 'vfio-pci': + netdev.bind_driver(driver='vfio-pci') + + elif driver == "igb_uio": + # igb_uio should insmod as default, no need to check + for port in ports: + netdev = self.dut.ports_info[port]['port'] + driver = netdev.get_nic_driver() + if driver != 'igb_uio': + netdev.bind_driver(driver='igb_uio') + else: + for port in ports: + netdev = self.dut.ports_info[port]['port'] + driver_now = netdev.get_nic_driver() + if driver == "": + driver = netdev.default_driver + if driver != driver_now: + netdev.bind_driver(driver=driver) + + def setup_vm_env(self, driver='default'): + """ + Create testing environment with 2VFs generated from 2PFs + """ + if self.env_done: + return + + # bind to default driver + self.bind_nic_driver(self.dut_ports[:2], driver="") + + self.used_dut_port_0 = self.dut_ports[0] + self.host_intf0 = self.dut.ports_info[self.used_dut_port_0]['intf'] + tester_port = self.tester.get_local_port(self.used_dut_port_0) + self.tester_intf0 = self.tester.get_interface(tester_port) + + self.dut.generate_sriov_vfs_by_port( + self.used_dut_port_0, 1, driver=driver) + self.sriov_vfs_port_0 = self.dut.ports_info[ + self.used_dut_port_0]['vfs_port'] + self.vf0_mac = "00:10:00:00:00:00" + self.dut.send_expect("ip link set %s vf 0 mac %s" % + (self.host_intf0, self.vf0_mac), "# ") + + self.used_dut_port_1 = self.dut_ports[1] + self.host_intf1 = self.dut.ports_info[self.used_dut_port_1]['intf'] + self.dut.generate_sriov_vfs_by_port( + self.used_dut_port_1, 1, driver=driver) + self.sriov_vfs_port_1 = self.dut.ports_info[ + self.used_dut_port_1]['vfs_port'] + tester_port = self.tester.get_local_port(self.used_dut_port_1) + self.tester_intf1 = self.tester.get_interface(tester_port) + + self.vf1_mac = "00:20:00:00:00:00" + self.dut.send_expect("ip link set %s vf 0 mac %s" % + (self.host_intf1, self.vf1_mac), "# ") + + try: + + for port in self.sriov_vfs_port_0: + port.bind_driver('pci-stub') + + for port in self.sriov_vfs_port_1: + port.bind_driver('pci-stub') + + time.sleep(1) + vf0_prop = {'opt_host': self.sriov_vfs_port_0[0].pci} + vf1_prop = {'opt_host': self.sriov_vfs_port_1[0].pci} + + # set up VM0 ENV + self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_vlan') + self.vm0.set_vm_device(driver='pci-assign', **vf0_prop) + self.vm0.set_vm_device(driver='pci-assign', **vf1_prop) + self.vm_dut_0 = self.vm0.start() + if self.vm_dut_0 is None: + raise Exception("Set up VM0 ENV failed!") + + except Exception as e: + self.destroy_vm_env() + raise Exception(e) + + self.env_done = True + + def destroy_vm_env(self): + if getattr(self, 'vm0', None): + self.vm_dut_0.kill_all() + self.vm0_testpmd = None + self.vm0_dut_ports = None + # destroy vm0 + self.vm0.stop() + self.vm0 = None + + if getattr(self, 'used_dut_port_0', None): + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_0) + port = self.dut.ports_info[self.used_dut_port_0]['port'] + self.used_dut_port_0 = None + + if getattr(self, 'used_dut_port_1', None): + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_1) + port = self.dut.ports_info[self.used_dut_port_1]['port'] + self.used_dut_port_1 = None + + self.bind_nic_driver(self.dut_ports[:2], driver="igb_uio") + + self.env_done = False + + def test_pvid_vf_tx(self): + """ + Add port based vlan on vf device and check vlan tx work + """ + random_vlan = random.randint(1, 4095) + + self.dut.send_expect( + "ip link set %s vf 0 vlan %d" % (self.host_intf0, random_vlan), "# ") + out = self.dut.send_expect("ip link show %s" % self.host_intf0, "# ") + self.verify("vlan %d" % + random_vlan in out, "Failed to add pvid on VF0") + + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd mac') + self.vm0_testpmd.execute_cmd('start') + + pkt = Packet(pkt_type='UDP') + pkt.config_layer('ether', {'dst': self.vf1_mac}) + inst = sniff_packets(self.tester_intf0, timeout=5) + pkt.send_pkt(tx_port=self.tester_intf1) + pkts = load_sniff_packets(inst) + + self.verify(len(pkts), "Not receive expected packet") + self.vm0_testpmd.quit() + + # disable pvid + self.dut.send_expect( + "ip link set %s vf 0 vlan 0" % (self.host_intf0), "# ") + + def send_and_getout(self, vlan=0, pkt_type="UDP"): + + if pkt_type == "UDP": + pkt = Packet(pkt_type='UDP') + pkt.config_layer('ether', {'dst': self.vf0_mac}) + elif pkt_type == "VLAN_UDP": + pkt = Packet(pkt_type='VLAN_UDP') + pkt.config_layer('dot1q', {'vlan': vlan}) + pkt.config_layer('ether', {'dst': self.vf0_mac}) + + pkt.send_pkt(tx_port=self.tester_intf0) + out = self.vm_dut_0.get_session_output(timeout=2) + + return out + + def test_add_pvid_vf(self): + random_vlan = random.randint(1, 4095) + + self.dut.send_expect( + "ip link set %s vf 0 vlan %d" % (self.host_intf0, random_vlan), "# ") + out = self.dut.send_expect("ip link show %s" % self.host_intf0, "# ") + self.verify("vlan %d" % + random_vlan in out, "Failed to add pvid on VF0") + + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd rxonly') + self.vm0_testpmd.execute_cmd('set verbose 1') + self.vm0_testpmd.execute_cmd('start') + + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify("received" in out, "Failed to received vlan packet!!!") + + # send packet without vlan + out = self.send_and_getout(pkt_type="UDP") + self.verify("received" not in out, "Received packet without vlan!!!") + + # send packet with vlan not matched + wrong_vlan = (random_vlan + 1) % 4096 + out = self.send_and_getout(vlan=wrong_vlan, pkt_type="VLAN_UDP") + self.verify( + "received" not in out, "Received pacekt with wrong vlan!!!") + + # remove vlan + self.dut.send_expect( + "ip link set %s vf 0 vlan 0" % self.host_intf0, "# ") + + # send packet with vlan + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify( + "received" not in out, "Received vlan packet without pvid!!!") + + # send packe with vlan 0 + out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP") + self.verify( + "received" in out, "Not recevied packet with vlan 0!!!") + + # send packet without vlan + out = self.send_and_getout(vlan=0, pkt_type="UDP") + self.verify("received" in out, "Not received packet without vlan!!!") + + self.vm0_testpmd.quit() + + # disable pvid + self.dut.send_expect( + "ip link set %s vf 0 vlan 0" % (self.host_intf0), "# ") + + def test_vf_vlan_tx(self): + random_vlan = random.randint(1, 4095) + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set verbose 1') + + self.vm0_testpmd.execute_cmd('tx_vlan set 0 %d' % random_vlan) + + inst = sniff_packets(self.tester_intf0, timeout=5) + self.vm0_testpmd.execute_cmd('set burst 1') + self.vm0_testpmd.execute_cmd('start tx_first') + + # strip sniffered vlans + pkts = load_sniff_packets(inst) + vlans = [] + for pkt in pkts: + vlan = pkt.strip_element_dot1q("vlan") + vlans.append(vlan) + + self.verify( + random_vlan in vlans, "Tx packet with vlan not received!!!") + + self.vm0_testpmd.quit() + + def test_vf_vlan_rx(self): + random_vlan = random.randint(1, 4095) + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd rxonly') + self.vm0_testpmd.execute_cmd('set verbose 1') + self.vm0_testpmd.execute_cmd('vlan set strip off 0') + self.vm0_testpmd.execute_cmd('start') + + # send packet without vlan + out = self.send_and_getout(vlan=0, pkt_type="UDP") + self.verify( + "received 1 packets" in out, "Not received normal packet as default!!!") + + # send packet with vlan 0 + out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP") + self.verify("VLAN tci=0x0" + in out, "Not received vlan 0 packet as default!!!") + + self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % random_vlan) + # send packet with same vlan + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + vlan_hex = hex(random_vlan) + self.verify("VLAN tci=%s" % + vlan_hex in out, "Not received expected vlan packet!!!") + + pkt = Packet(pkt_type='VLAN_UDP') + wrong_vlan = (random_vlan + 1) % 4096 + # send packet with wrong vlan + out = self.send_and_getout(vlan=wrong_vlan, pkt_type="VLAN_UDP") + self.verify( + "received 1 packets" not in out, "Received filtered vlan packet!!!") + + self.vm0_testpmd.execute_cmd('rx_vlan rm 0 %d' % random_vlan) + # send packet with vlan 0 + out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP") + self.verify("VLAN tci=0x0" + in out, "Not received vlan 0 packet as default!!!") + + # send packet without vlan + out = self.send_and_getout(pkt_type="UDP") + self.verify("received 1 packets" in out, + "Not received normal packet after remove vlan filter!!!") + + # send packet without vlan + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify( + "received 1 packets" in out, "Not received vlan packet without vlan filter!!!") + + self.vm0_testpmd.quit() + + def test_vf_vlan_strip(self): + random_vlan = random.randint(1, 4095) + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd rxonly') + self.vm0_testpmd.execute_cmd('set verbose 1') + self.vm0_testpmd.execute_cmd('vlan set strip on 0') + self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % random_vlan) + self.vm0_testpmd.execute_cmd('start') + + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + # enable strip, vlan will be in mbuf + vlan_hex = hex(random_vlan) + self.verify("VLAN tci=%s" % + vlan_hex in out, "Failed to strip vlan packet!!!") + + self.vm0_testpmd.execute_cmd('vlan set strip off 0') + + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify( + "received 1 packets" in out, "Not received vlan packet as expected!!!") + nic_type = self.vm_dut_0.ports_info[0]['type'] + nic_name = get_nic_name(nic_type) + if nic_name in ['fvl10g_vf']: + self.verify("VLAN tci=%s" % + vlan_hex in out, "Failed to disable strip vlan!!!") + else: + self.verify("VLAN tci=0x0" in out, "Failed to disable strip vlan!!!") + + self.vm0_testpmd.quit() + + def tear_down(self): + self.vm_dut_0.kill_all() + pass + + def tear_down_all(self): + self.destroy_vm_env() + pass -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation 2016-01-11 7:05 ` [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation Yong Liu @ 2016-01-18 1:37 ` Xu, Qian Q 0 siblings, 0 replies; 9+ messages in thread From: Xu, Qian Q @ 2016-01-18 1:37 UTC (permalink / raw) To: Liu, Yong, dts When doing vf testing, we many need add crc config on or else the packet RX/TX may have problems. >port stop all >port config all crc-strip on >port start all Thanks Qian -----Original Message----- From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yong Liu Sent: Monday, January 11, 2016 3:06 PM To: dts@dpdk.org Subject: [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py new file mode 100644 index 0000000..62fda22 --- /dev/null +++ b/tests/TestSuite_vf_vlan.py @@ -0,0 +1,362 @@ +# <COPYRIGHT_TAG> + +import re +import time + +import dts +from qemu_kvm import QEMUKvm +from test_case import TestCase +from pmd_output import PmdOutput +from packet import Packet, sniff_packets, load_sniff_packets from +settings import get_nic_name import random + +VM_CORES_MASK = 'all' + + +class TestVfVlan(TestCase): + + def set_up_all(self): + + self.dut_ports = self.dut.get_ports(self.nic) + self.verify(len(self.dut_ports) > 1, "Insufficient ports") + self.vm0 = None + self.env_done = False + + def set_up(self): + self.setup_vm_env() + + def bind_nic_driver(self, ports, driver=""): + # modprobe vfio driver + if driver == "vfio-pci": + for port in ports: + netdev = self.dut.ports_info[port]['port'] + driver = netdev.get_nic_driver() + if driver != 'vfio-pci': + netdev.bind_driver(driver='vfio-pci') + + elif driver == "igb_uio": + # igb_uio should insmod as default, no need to check + for port in ports: + netdev = self.dut.ports_info[port]['port'] + driver = netdev.get_nic_driver() + if driver != 'igb_uio': + netdev.bind_driver(driver='igb_uio') + else: + for port in ports: + netdev = self.dut.ports_info[port]['port'] + driver_now = netdev.get_nic_driver() + if driver == "": + driver = netdev.default_driver + if driver != driver_now: + netdev.bind_driver(driver=driver) + + def setup_vm_env(self, driver='default'): + """ + Create testing environment with 2VFs generated from 2PFs + """ + if self.env_done: + return + + # bind to default driver + self.bind_nic_driver(self.dut_ports[:2], driver="") + + self.used_dut_port_0 = self.dut_ports[0] + self.host_intf0 = self.dut.ports_info[self.used_dut_port_0]['intf'] + tester_port = self.tester.get_local_port(self.used_dut_port_0) + self.tester_intf0 = self.tester.get_interface(tester_port) + + self.dut.generate_sriov_vfs_by_port( + self.used_dut_port_0, 1, driver=driver) + self.sriov_vfs_port_0 = self.dut.ports_info[ + self.used_dut_port_0]['vfs_port'] + self.vf0_mac = "00:10:00:00:00:00" + self.dut.send_expect("ip link set %s vf 0 mac %s" % + (self.host_intf0, self.vf0_mac), "# ") + + self.used_dut_port_1 = self.dut_ports[1] + self.host_intf1 = self.dut.ports_info[self.used_dut_port_1]['intf'] + self.dut.generate_sriov_vfs_by_port( + self.used_dut_port_1, 1, driver=driver) + self.sriov_vfs_port_1 = self.dut.ports_info[ + self.used_dut_port_1]['vfs_port'] + tester_port = self.tester.get_local_port(self.used_dut_port_1) + self.tester_intf1 = self.tester.get_interface(tester_port) + + self.vf1_mac = "00:20:00:00:00:00" + self.dut.send_expect("ip link set %s vf 0 mac %s" % + (self.host_intf1, self.vf1_mac), "# ") + + try: + + for port in self.sriov_vfs_port_0: + port.bind_driver('pci-stub') + + for port in self.sriov_vfs_port_1: + port.bind_driver('pci-stub') + + time.sleep(1) + vf0_prop = {'opt_host': self.sriov_vfs_port_0[0].pci} + vf1_prop = {'opt_host': self.sriov_vfs_port_1[0].pci} + + # set up VM0 ENV + self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_vlan') + self.vm0.set_vm_device(driver='pci-assign', **vf0_prop) + self.vm0.set_vm_device(driver='pci-assign', **vf1_prop) + self.vm_dut_0 = self.vm0.start() + if self.vm_dut_0 is None: + raise Exception("Set up VM0 ENV failed!") + + except Exception as e: + self.destroy_vm_env() + raise Exception(e) + + self.env_done = True + + def destroy_vm_env(self): + if getattr(self, 'vm0', None): + self.vm_dut_0.kill_all() + self.vm0_testpmd = None + self.vm0_dut_ports = None + # destroy vm0 + self.vm0.stop() + self.vm0 = None + + if getattr(self, 'used_dut_port_0', None): + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_0) + port = self.dut.ports_info[self.used_dut_port_0]['port'] + self.used_dut_port_0 = None + + if getattr(self, 'used_dut_port_1', None): + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_1) + port = self.dut.ports_info[self.used_dut_port_1]['port'] + self.used_dut_port_1 = None + + self.bind_nic_driver(self.dut_ports[:2], driver="igb_uio") + + self.env_done = False + + def test_pvid_vf_tx(self): + """ + Add port based vlan on vf device and check vlan tx work + """ + random_vlan = random.randint(1, 4095) + + self.dut.send_expect( + "ip link set %s vf 0 vlan %d" % (self.host_intf0, random_vlan), "# ") + out = self.dut.send_expect("ip link show %s" % self.host_intf0, "# ") + self.verify("vlan %d" % + random_vlan in out, "Failed to add pvid on VF0") + + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd mac') + self.vm0_testpmd.execute_cmd('start') + + pkt = Packet(pkt_type='UDP') + pkt.config_layer('ether', {'dst': self.vf1_mac}) + inst = sniff_packets(self.tester_intf0, timeout=5) + pkt.send_pkt(tx_port=self.tester_intf1) + pkts = load_sniff_packets(inst) + + self.verify(len(pkts), "Not receive expected packet") + self.vm0_testpmd.quit() + + # disable pvid + self.dut.send_expect( + "ip link set %s vf 0 vlan 0" % (self.host_intf0), "# ") + + def send_and_getout(self, vlan=0, pkt_type="UDP"): + + if pkt_type == "UDP": + pkt = Packet(pkt_type='UDP') + pkt.config_layer('ether', {'dst': self.vf0_mac}) + elif pkt_type == "VLAN_UDP": + pkt = Packet(pkt_type='VLAN_UDP') + pkt.config_layer('dot1q', {'vlan': vlan}) + pkt.config_layer('ether', {'dst': self.vf0_mac}) + + pkt.send_pkt(tx_port=self.tester_intf0) + out = self.vm_dut_0.get_session_output(timeout=2) + + return out + + def test_add_pvid_vf(self): + random_vlan = random.randint(1, 4095) + + self.dut.send_expect( + "ip link set %s vf 0 vlan %d" % (self.host_intf0, random_vlan), "# ") + out = self.dut.send_expect("ip link show %s" % self.host_intf0, "# ") + self.verify("vlan %d" % + random_vlan in out, "Failed to add pvid on VF0") + + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd rxonly') + self.vm0_testpmd.execute_cmd('set verbose 1') + self.vm0_testpmd.execute_cmd('start') + + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify("received" in out, "Failed to received vlan + packet!!!") + + # send packet without vlan + out = self.send_and_getout(pkt_type="UDP") + self.verify("received" not in out, "Received packet without + vlan!!!") + + # send packet with vlan not matched + wrong_vlan = (random_vlan + 1) % 4096 + out = self.send_and_getout(vlan=wrong_vlan, pkt_type="VLAN_UDP") + self.verify( + "received" not in out, "Received pacekt with wrong + vlan!!!") + + # remove vlan + self.dut.send_expect( + "ip link set %s vf 0 vlan 0" % self.host_intf0, "# ") + + # send packet with vlan + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify( + "received" not in out, "Received vlan packet without + pvid!!!") + + # send packe with vlan 0 + out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP") + self.verify( + "received" in out, "Not recevied packet with vlan 0!!!") + + # send packet without vlan + out = self.send_and_getout(vlan=0, pkt_type="UDP") + self.verify("received" in out, "Not received packet without + vlan!!!") + + self.vm0_testpmd.quit() + + # disable pvid + self.dut.send_expect( + "ip link set %s vf 0 vlan 0" % (self.host_intf0), "# ") + + def test_vf_vlan_tx(self): + random_vlan = random.randint(1, 4095) + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set verbose 1') + + self.vm0_testpmd.execute_cmd('tx_vlan set 0 %d' % random_vlan) + + inst = sniff_packets(self.tester_intf0, timeout=5) + self.vm0_testpmd.execute_cmd('set burst 1') + self.vm0_testpmd.execute_cmd('start tx_first') + + # strip sniffered vlans + pkts = load_sniff_packets(inst) + vlans = [] + for pkt in pkts: + vlan = pkt.strip_element_dot1q("vlan") + vlans.append(vlan) + + self.verify( + random_vlan in vlans, "Tx packet with vlan not + received!!!") + + self.vm0_testpmd.quit() + + def test_vf_vlan_rx(self): + random_vlan = random.randint(1, 4095) + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd rxonly') + self.vm0_testpmd.execute_cmd('set verbose 1') + self.vm0_testpmd.execute_cmd('vlan set strip off 0') + self.vm0_testpmd.execute_cmd('start') + + # send packet without vlan + out = self.send_and_getout(vlan=0, pkt_type="UDP") + self.verify( + "received 1 packets" in out, "Not received normal packet as + default!!!") + + # send packet with vlan 0 + out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP") + self.verify("VLAN tci=0x0" + in out, "Not received vlan 0 packet as default!!!") + + self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % random_vlan) + # send packet with same vlan + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + vlan_hex = hex(random_vlan) + self.verify("VLAN tci=%s" % + vlan_hex in out, "Not received expected vlan + packet!!!") + + pkt = Packet(pkt_type='VLAN_UDP') + wrong_vlan = (random_vlan + 1) % 4096 + # send packet with wrong vlan + out = self.send_and_getout(vlan=wrong_vlan, pkt_type="VLAN_UDP") + self.verify( + "received 1 packets" not in out, "Received filtered vlan + packet!!!") + + self.vm0_testpmd.execute_cmd('rx_vlan rm 0 %d' % random_vlan) + # send packet with vlan 0 + out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP") + self.verify("VLAN tci=0x0" + in out, "Not received vlan 0 packet as default!!!") + + # send packet without vlan + out = self.send_and_getout(pkt_type="UDP") + self.verify("received 1 packets" in out, + "Not received normal packet after remove vlan + filter!!!") + + # send packet without vlan + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify( + "received 1 packets" in out, "Not received vlan packet + without vlan filter!!!") + + self.vm0_testpmd.quit() + + def test_vf_vlan_strip(self): + random_vlan = random.randint(1, 4095) + # start testpmd in VM + self.vm0_dut_ports = self.vm_dut_0.get_ports('any') + + self.vm0_testpmd = PmdOutput(self.vm_dut_0) + self.vm0_testpmd.start_testpmd(VM_CORES_MASK) + self.vm0_testpmd.execute_cmd('set fwd rxonly') + self.vm0_testpmd.execute_cmd('set verbose 1') + self.vm0_testpmd.execute_cmd('vlan set strip on 0') + self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % random_vlan) + self.vm0_testpmd.execute_cmd('start') + + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + # enable strip, vlan will be in mbuf + vlan_hex = hex(random_vlan) + self.verify("VLAN tci=%s" % + vlan_hex in out, "Failed to strip vlan packet!!!") + + self.vm0_testpmd.execute_cmd('vlan set strip off 0') + + out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP") + self.verify( + "received 1 packets" in out, "Not received vlan packet as expected!!!") + nic_type = self.vm_dut_0.ports_info[0]['type'] + nic_name = get_nic_name(nic_type) + if nic_name in ['fvl10g_vf']: + self.verify("VLAN tci=%s" % + vlan_hex in out, "Failed to disable strip vlan!!!") + else: + self.verify("VLAN tci=0x0" in out, "Failed to disable strip + vlan!!!") + + self.vm0_testpmd.quit() + + def tear_down(self): + self.vm_dut_0.kill_all() + pass + + def tear_down_all(self): + self.destroy_vm_env() + pass -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts] [PATCH 6/6] conf vf_vlan: add configuration file for VF vlan 2016-01-11 7:05 [dts] [PATCH 1/6] framework tester: NIC object get from net_device module Yong Liu ` (3 preceding siblings ...) 2016-01-11 7:05 ` [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation Yong Liu @ 2016-01-11 7:05 ` Yong Liu 4 siblings, 0 replies; 9+ messages in thread From: Yong Liu @ 2016-01-11 7:05 UTC (permalink / raw) To: dts Signed-off-by: Marvin Liu <yong.liu@intel.com> diff --git a/conf/vf_vlan.cfg b/conf/vf_vlan.cfg new file mode 100644 index 0000000..94e68b4 --- /dev/null +++ b/conf/vf_vlan.cfg @@ -0,0 +1,11 @@ +[vm0] +cpu = + model=host,number=4,cpupin=5 6 7 8; +disk = + file=/storage/vm-image/vm0.img; +login = + user=root,password=tester; +vnc = + displayNum=1; +daemon = + enable=yes; -- 1.9.3 ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-01-18 7:46 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-01-11 7:05 [dts] [PATCH 1/6] framework tester: NIC object get from net_device module Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 2/6] framework packet: only sniff coming packet when tcpdump support Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 3/6] framework pmd_output: support quit command of testpmd Yong Liu 2016-01-11 7:05 ` [dts] [PATCH 4/6] tests vf_vlan: add VF vlan test plan Yong Liu 2016-01-18 1:30 ` Xu, Qian Q 2016-01-18 7:48 ` Liu, Yong 2016-01-11 7:05 ` [dts] [PATCH 5/6] tests vf_vlan: add test suite for VF vlan validation Yong Liu 2016-01-18 1:37 ` Xu, Qian Q 2016-01-11 7:05 ` [dts] [PATCH 6/6] conf vf_vlan: add configuration file for VF vlan Yong Liu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).