[dts] [PATCH 0/3] supporting Mellanox ConnectX4 NIC in DTS

[dts] [PATCH 0/3] supporting Mellanox ConnectX4 NIC in DTS

[Raslan Darawsheh]

the following  patches where to support Mellanox ConnectX4 NIC in the DTS tests

Raslan Darawsheh (3):
  framework/settings.py adding support for ConnectX4 NIC
  framework/project_dpdk.py enabling MLX5 PMD for Mellanox NIC
  executions/execution.* adding mlx5_core to bind Mellanox NIC's to the
    driver

 executions/execution.cfg       | 2 +-
 executions/execution_FVL.cfg   | 2 +-
 executions/execution_smoke.cfg | 2 +-
 framework/project_dpdk.py      | 6 ++++++
 framework/settings.py          | 6 ++++--
 5 files changed, 13 insertions(+), 5 deletions(-)

-- 
1.9.1

[dts] [PATCH 1/3] framework/settings.py adding support for ConnectX4 NIC

[Raslan Darawsheh]

From: Raslan Darawsheh <rdarawsheh@asaltech.com>

Signed-off-by: Raslan Darawsheh <rdarawsheh@asaltech.com>
---
 framework/settings.py | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/framework/settings.py b/framework/settings.py
index 02759f7..6988c57 100644
--- a/framework/settings.py
+++ b/framework/settings.py
@@ -76,7 +76,8 @@ NICS = {
     'fortville_spirit_single': '8086:1584',
     'redrockcanyou': '8086:15a4',
     'fortpark':'8086:374c',
-    'fvl10g_vf':'8086:154c'
+    'fvl10g_vf':'8086:154c',
+    'ConnectX4':'15b3:1013'
 }
 
 DRIVERS = {
@@ -108,7 +109,8 @@ DRIVERS = {
     'fortville_spirit': 'i40e',
     'fortville_spirit_single': 'i40e',
     'redrockcanyou': 'fm10k',
-    'fvl10g_vf':'i40evf'
+    'fvl10g_vf':'i40evf',
+    'ConnectX4':'mlx5_core'
 }
 
 """
-- 
1.9.1

[dts] [PATCH 2/3] framework/project_dpdk.py enabling MLX5 PMD for Mellanox NIC

[Raslan Darawsheh]

From: Raslan Darawsheh <rdarawsheh@asaltech.com>

Signed-off-by: Raslan Darawsheh <rdarawsheh@asaltech.com>
---
 framework/project_dpdk.py | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/framework/project_dpdk.py b/framework/project_dpdk.py
index 597982f..4a5e222 100644
--- a/framework/project_dpdk.py
+++ b/framework/project_dpdk.py
@@ -70,6 +70,12 @@ class DPDKdut(Dut):
         self.send_expect("export RTE_SDK=`pwd`", "#")
 
         self.set_rxtx_mode()
+
+        #Enable MLNX driver before installing dpdk
+        if dts.drivername == DRIVERS['ConnectX4']:
+            self.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_MLX5_PMD=n/"
+                             + "CONFIG_RTE_LIBRTE_MLX5_PMD=y/' config/common_linuxapp" , "# ", 30)
+
         if not self.skip_setup:
             self.build_install_dpdk(target)
 
-- 
1.9.1

[dts] [PATCH 3/3] executions/execution.* adding mlx5_core to bind Mellanox NIC's to the driver

[Raslan Darawsheh]

From: Raslan Darawsheh <rdarawsheh@asaltech.com>

Signed-off-by: Raslan Darawsheh <rdarawsheh@asaltech.com>
---
 executions/execution.cfg       | 2 +-
 executions/execution_FVL.cfg   | 2 +-
 executions/execution_smoke.cfg | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/executions/execution.cfg b/executions/execution.cfg
index aa0b384..598c990 100644
--- a/executions/execution.cfg
+++ b/executions/execution.cfg
@@ -1,6 +1,6 @@
 [Execution1]
 crbs=<CRB IP Address>
-drivername=<driver name igb_uio or vfio-pci>
+drivername=<driver name igb_uio or vfio-pci or mlx5_core>
 test_suites=
     cmdline,
     hello_world,
diff --git a/executions/execution_FVL.cfg b/executions/execution_FVL.cfg
index 2a9a9cc..c7bcf5f 100644
--- a/executions/execution_FVL.cfg
+++ b/executions/execution_FVL.cfg
@@ -1,6 +1,6 @@
 [Execution1]
 crbs=<CRB IP Address>
-drivername=<driver name igb_uio or vfio-pci>
+drivername=<driver name igb_uio or vfio-pci or mlx5_core>
 test_suites=
     checksum_offload,
     dynamic_config,
diff --git a/executions/execution_smoke.cfg b/executions/execution_smoke.cfg
index d090f8a..5012599 100644
--- a/executions/execution_smoke.cfg
+++ b/executions/execution_smoke.cfg
@@ -1,6 +1,6 @@
 [Execution1]
 crbs=<CRB IP Address>
-drivername=<driver name igb_uio or vfio-pci>
+drivername=<driver name igb_uio or vfio-pci or mlx5_core>
 test_suites=
     unit_tests_cmdline,
     unit_tests_eal,
-- 
1.9.1

Re: [dts] [PATCH 0/3] supporting Mellanox ConnectX4 NIC in DTS

[Liu, Yong]

Applied. Thanks, Darawsheh. 

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Raslan Darawsheh
> Sent: Thursday, January 21, 2016 8:18 PM
> To: dts@dpdk.org
> Cc: fhamad@asaltech.com; olgas@mellanox.com; Raslan Darawsheh;
> rdarawsheh@asaltech.com
> Subject: [dts] [PATCH 0/3] supporting Mellanox ConnectX4 NIC in DTS
> 
> the following  patches where to support Mellanox ConnectX4 NIC in the DTS
> tests
> 
> Raslan Darawsheh (3):
>   framework/settings.py adding support for ConnectX4 NIC
>   framework/project_dpdk.py enabling MLX5 PMD for Mellanox NIC
>   executions/execution.* adding mlx5_core to bind Mellanox NIC's to the
>     driver
> 
>  executions/execution.cfg       | 2 +-
>  executions/execution_FVL.cfg   | 2 +-
>  executions/execution_smoke.cfg | 2 +-
>  framework/project_dpdk.py      | 6 ++++++
>  framework/settings.py          | 6 ++++--
>  5 files changed, 13 insertions(+), 5 deletions(-)
> 
> --
> 1.9.1