From: Yong Liu <yong.liu@intel.com>
To: dts@dpdk.org
Subject: [dts] [PATCH 1/6] nics fm10k: rename fm10k module to rrc
Date: Wed, 3 Feb 2016 14:50:12 +0800 [thread overview]
Message-ID: <1454482217-25147-2-git-send-email-yong.liu@intel.com> (raw)
In-Reply-To: <1454482217-25147-1-git-send-email-yong.liu@intel.com>
FM10k is the family name, this family contained of several different
nics. Separated to different nic modules for each of them has specified
settings.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
diff --git a/nics/fm10k.py b/nics/fm10k.py
deleted file mode 100644
index 7d42814..0000000
--- a/nics/fm10k.py
+++ /dev/null
@@ -1,240 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-from crb import Crb
-from config import PortConf, PORTCONF
-from exception import PortConfigParseException
-from utils import GREEN
-from net_device import NetDevice
-
-DEF_PASSWD = 's'
-TP_BINARY = 'TestPoint'
-
-FUNC_RULES = [
- # disable cut through for jumbo frame case
- 'set port config 20,22 tx_cut_through off',
- # disable mac learning
- 'set port config 0..22 learning off',
- #redirect PEP0 to EPL0
- 'create acl 0',
- 'create acl-rule 0 0',
- 'add acl-rule condition 0 0 src-port 20',
- 'add acl-rule action 0 0 redirect 1',
- 'add acl-rule action 0 0 count',
- #redirect PEP1 to EPL1
- 'create acl 1',
- 'create acl-rule 1 0',
- 'add acl-rule condition 1 0 src-port 22',
- 'add acl-rule action 1 0 redirect 5',
- 'add acl-rule action 1 0 count',
- 'apply acl',
- ]
-
-PERF_RULES = [
- 'set port config 0..11 parser_cfg L4', # frame parser up to L4
- # good for performance
- 'set api attribute boolean api.paritySweeper.enable false',
- 'reg dbg set 0 CM_SOFTDROP_WM 0x5f005f00 0 0',
- 'reg dbg set 0 CM_SHARED_WM 0x5f00 0 0',
- # rule for direct rx traffic
- # mac filter will be useless, so only enable for perf
- 'create acl-rule 0 1',
- 'add acl-rule condition 0 1 src-port 1',
- 'add acl-rule action 0 1 redirect 20',
- 'add acl-rule action 0 1 count',
- 'create acl-rule 1 1',
- 'add acl-rule condition 1 1 src-port 5',
- 'add acl-rule action 1 1 redirect 22',
- 'add acl-rule action 1 1 count',
- 'apply acl',
- ]
-
-class CtrlCrb(Crb):
- """
- Simplified Crb class for RedRockCanyou control session
- """
-
- def __init__(self, crb):
- self.crb = crb
- self.NAME = 'dut_RRC_CONTROL'
- super(CtrlCrb, self).__init__(crb, None, self.NAME)
-
- def get_ip_address(self):
- return self.crb['IP']
-
- def get_password(self):
- return self.crb['pass']
-
-
-class RedRockCanyou(NetDevice):
- """
- Class for RedRockCanyou, inherit from NetDevice class
- """
-
- def __init__(self, host, bus_id, devfun_id):
- super(RedRockCanyou, self).__init__(host, bus_id, devfun_id)
- self.tp_path = "~"
- self.sec_port = False
- self.host = host
-
- # load port config
- portconf = PortConf(PORTCONF)
- portconf.load_ports_config(host.crb['IP'])
- pci_addr = ':'.join((bus_id, devfun_id))
- if not portconf.check_port_available(pci_addr):
- raise PortConfigParseException("RRC must configured")
-
- port_cfg = portconf.get_ports_config()[pci_addr]
-
- # secondary port do not need reinitialize
- if 'sec_port' in port_cfg.keys():
- print GREEN("Skip init second port test point session")
- if 'first_port' not in port_cfg.keys():
- raise PortConfigParseException("RRC second port must configure first port")
- # find net_device by pci_addr
- first_addr = port_cfg['first_port']
- port_info = self.host.get_port_info(first_addr)
- if port_info is None:
- raise PortConfigParseException("RRC first port not found")
- # get addtional session
- netdev = port_info['port']
- self.ctrl_crb = netdev.get_control()
- self.sec_port = True
- return
-
- if 'tp_ip' not in port_cfg.keys():
- raise PortConfigParseException("RRC must configure test point ip")
-
- crb = {}
- crb['IP'] = port_cfg['tp_ip']
- if 'passwd' not in port_cfg.keys():
- crb['pass'] = DEF_PASSWD
- else:
- crb['pass'] = port_cfg['passwd']
-
- if 'tp_path' in port_cfg.keys():
- self.tp_path = port_cfg['tp_path']
-
- # create addtional session
- self.ctrl_crb = CtrlCrb(crb)
-
- def setup(self):
- # setup function should be called after bind to igb_uio
- self.start_testpoint()
-
- def optimize_perf(self, peer0="", peer1=""):
- # rule which can optimize performance
- if self.sec_port is False:
- # applied rules
- for rule in PERF_RULES:
- self.ctrl_crb.send_expect("%s" %rule, "<0>%")
- # add default mac rule
- self.ctrl_crb.send_expect("add mac %s 1 locked port 1" % peer0, "<0>%")
- self.ctrl_crb.send_expect("add mac %s 1 locked port 5" % peer1, "<0>%")
-
- def stop(self):
- # second port do not need any operation
- if self.sec_port:
- return
-
- # stop testpoint
- self.stop_testpoint()
-
- def close(self):
- # second port do not need any operation
- if self.sec_port:
- return
-
- # close session
- if self.ctrl_crb.session:
- self.ctrl_crb.session.close()
- self.ctrl_crb.session = None
- if self.ctrl_crb.alt_session:
- self.ctrl_crb.alt_session.close()
- self.ctrl_crb.alt_session = None
-
- def start_testpoint(self):
- """
- Before any execution, must enable test point first
- """
- if self.sec_port:
- print GREEN("Skip start second port testpoint")
- return
- self.ctrl_crb.send_expect("cd %s" % self.tp_path, "# ")
- if self.tp_path != "~":
- command = './' + TP_BINARY
- else:
- command = TP_BINARY
-
- self.ctrl_crb.send_expect("%s" % command, "<0>%", 120)
- for rule in FUNC_RULES:
- self.ctrl_crb.send_expect("%s" %rule, "<0>%")
-
- def stop_testpoint(self):
- """
- Exit test point
- """
- self.ctrl_crb.send_expect("quit", "# ")
-
- def get_control(self):
- return self.ctrl_crb
-
- def add_vlan(self, vlan_id=0):
- self.ctrl_crb.send_expect("create vlan %d" % vlan_id, "<0>%")
- if self.sec_port:
- self.ctrl_crb.send_expect("add vlan port %d 5,22" % vlan_id, "<0>%")
- else:
- self.ctrl_crb.send_expect("add vlan port %d 1,20" % vlan_id, "<0>%")
-
- def delete_vlan(self, vlan_id=0):
- if self.sec_port:
- self.ctrl_crb.send_expect("del vlan port %d 5,22" % vlan_id, "<0>%")
- else:
- self.ctrl_crb.send_expect("del vlan port %d 1,20" % vlan_id, "<0>%")
- self.ctrl_crb.send_expect("del vlan %d" % vlan_id, "<0>%")
-
- def add_txvlan(self, vlan_id=0):
- if self.sec_port:
- self.ctrl_crb.send_expect("set vlan tagging %d 5 tag" % vlan_id, "<0>%")
- else:
- self.ctrl_crb.send_expect("set vlan tagging %d 1 tag" % vlan_id, "<0>%")
-
- def delete_txvlan(self, vlan_id=0):
- if self.sec_port:
- self.ctrl_crb.send_expect("set vlan tagging %d 5 untag" % vlan_id, "<0>%")
- else:
- self.ctrl_crb.send_expect("set vlan tagging %d 1 untag" % vlan_id, "<0>%")
-
- def enable_jumbo(self, framesize=0):
- if self.sec_port:
- self.ctrl_crb.send_expect("set port config 5 max_frame_size %d" % framesize, "<0>%")
- else:
- self.ctrl_crb.send_expect("set port config 1 max_frame_size %d" % framesize, "<0>%")
diff --git a/nics/net_device.py b/nics/net_device.py
index 0286aa4..2299e6f 100644
--- a/nics/net_device.py
+++ b/nics/net_device.py
@@ -829,7 +829,7 @@ def GetNicObj(crb, bus_id, devfun_id):
if nic == 'redrockcanyou':
# redrockcanyou nic need special initialization
- from fm10k import RedRockCanyou
+ from rrc import RedRockCanyou
obj = RedRockCanyou(crb, bus_id, devfun_id)
elif nic == 'atwood':
# atwood nic need special initialization
diff --git a/nics/rrc.py b/nics/rrc.py
new file mode 100644
index 0000000..7d42814
--- /dev/null
+++ b/nics/rrc.py
@@ -0,0 +1,240 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+from crb import Crb
+from config import PortConf, PORTCONF
+from exception import PortConfigParseException
+from utils import GREEN
+from net_device import NetDevice
+
+DEF_PASSWD = 's'
+TP_BINARY = 'TestPoint'
+
+FUNC_RULES = [
+ # disable cut through for jumbo frame case
+ 'set port config 20,22 tx_cut_through off',
+ # disable mac learning
+ 'set port config 0..22 learning off',
+ #redirect PEP0 to EPL0
+ 'create acl 0',
+ 'create acl-rule 0 0',
+ 'add acl-rule condition 0 0 src-port 20',
+ 'add acl-rule action 0 0 redirect 1',
+ 'add acl-rule action 0 0 count',
+ #redirect PEP1 to EPL1
+ 'create acl 1',
+ 'create acl-rule 1 0',
+ 'add acl-rule condition 1 0 src-port 22',
+ 'add acl-rule action 1 0 redirect 5',
+ 'add acl-rule action 1 0 count',
+ 'apply acl',
+ ]
+
+PERF_RULES = [
+ 'set port config 0..11 parser_cfg L4', # frame parser up to L4
+ # good for performance
+ 'set api attribute boolean api.paritySweeper.enable false',
+ 'reg dbg set 0 CM_SOFTDROP_WM 0x5f005f00 0 0',
+ 'reg dbg set 0 CM_SHARED_WM 0x5f00 0 0',
+ # rule for direct rx traffic
+ # mac filter will be useless, so only enable for perf
+ 'create acl-rule 0 1',
+ 'add acl-rule condition 0 1 src-port 1',
+ 'add acl-rule action 0 1 redirect 20',
+ 'add acl-rule action 0 1 count',
+ 'create acl-rule 1 1',
+ 'add acl-rule condition 1 1 src-port 5',
+ 'add acl-rule action 1 1 redirect 22',
+ 'add acl-rule action 1 1 count',
+ 'apply acl',
+ ]
+
+class CtrlCrb(Crb):
+ """
+ Simplified Crb class for RedRockCanyou control session
+ """
+
+ def __init__(self, crb):
+ self.crb = crb
+ self.NAME = 'dut_RRC_CONTROL'
+ super(CtrlCrb, self).__init__(crb, None, self.NAME)
+
+ def get_ip_address(self):
+ return self.crb['IP']
+
+ def get_password(self):
+ return self.crb['pass']
+
+
+class RedRockCanyou(NetDevice):
+ """
+ Class for RedRockCanyou, inherit from NetDevice class
+ """
+
+ def __init__(self, host, bus_id, devfun_id):
+ super(RedRockCanyou, self).__init__(host, bus_id, devfun_id)
+ self.tp_path = "~"
+ self.sec_port = False
+ self.host = host
+
+ # load port config
+ portconf = PortConf(PORTCONF)
+ portconf.load_ports_config(host.crb['IP'])
+ pci_addr = ':'.join((bus_id, devfun_id))
+ if not portconf.check_port_available(pci_addr):
+ raise PortConfigParseException("RRC must configured")
+
+ port_cfg = portconf.get_ports_config()[pci_addr]
+
+ # secondary port do not need reinitialize
+ if 'sec_port' in port_cfg.keys():
+ print GREEN("Skip init second port test point session")
+ if 'first_port' not in port_cfg.keys():
+ raise PortConfigParseException("RRC second port must configure first port")
+ # find net_device by pci_addr
+ first_addr = port_cfg['first_port']
+ port_info = self.host.get_port_info(first_addr)
+ if port_info is None:
+ raise PortConfigParseException("RRC first port not found")
+ # get addtional session
+ netdev = port_info['port']
+ self.ctrl_crb = netdev.get_control()
+ self.sec_port = True
+ return
+
+ if 'tp_ip' not in port_cfg.keys():
+ raise PortConfigParseException("RRC must configure test point ip")
+
+ crb = {}
+ crb['IP'] = port_cfg['tp_ip']
+ if 'passwd' not in port_cfg.keys():
+ crb['pass'] = DEF_PASSWD
+ else:
+ crb['pass'] = port_cfg['passwd']
+
+ if 'tp_path' in port_cfg.keys():
+ self.tp_path = port_cfg['tp_path']
+
+ # create addtional session
+ self.ctrl_crb = CtrlCrb(crb)
+
+ def setup(self):
+ # setup function should be called after bind to igb_uio
+ self.start_testpoint()
+
+ def optimize_perf(self, peer0="", peer1=""):
+ # rule which can optimize performance
+ if self.sec_port is False:
+ # applied rules
+ for rule in PERF_RULES:
+ self.ctrl_crb.send_expect("%s" %rule, "<0>%")
+ # add default mac rule
+ self.ctrl_crb.send_expect("add mac %s 1 locked port 1" % peer0, "<0>%")
+ self.ctrl_crb.send_expect("add mac %s 1 locked port 5" % peer1, "<0>%")
+
+ def stop(self):
+ # second port do not need any operation
+ if self.sec_port:
+ return
+
+ # stop testpoint
+ self.stop_testpoint()
+
+ def close(self):
+ # second port do not need any operation
+ if self.sec_port:
+ return
+
+ # close session
+ if self.ctrl_crb.session:
+ self.ctrl_crb.session.close()
+ self.ctrl_crb.session = None
+ if self.ctrl_crb.alt_session:
+ self.ctrl_crb.alt_session.close()
+ self.ctrl_crb.alt_session = None
+
+ def start_testpoint(self):
+ """
+ Before any execution, must enable test point first
+ """
+ if self.sec_port:
+ print GREEN("Skip start second port testpoint")
+ return
+ self.ctrl_crb.send_expect("cd %s" % self.tp_path, "# ")
+ if self.tp_path != "~":
+ command = './' + TP_BINARY
+ else:
+ command = TP_BINARY
+
+ self.ctrl_crb.send_expect("%s" % command, "<0>%", 120)
+ for rule in FUNC_RULES:
+ self.ctrl_crb.send_expect("%s" %rule, "<0>%")
+
+ def stop_testpoint(self):
+ """
+ Exit test point
+ """
+ self.ctrl_crb.send_expect("quit", "# ")
+
+ def get_control(self):
+ return self.ctrl_crb
+
+ def add_vlan(self, vlan_id=0):
+ self.ctrl_crb.send_expect("create vlan %d" % vlan_id, "<0>%")
+ if self.sec_port:
+ self.ctrl_crb.send_expect("add vlan port %d 5,22" % vlan_id, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("add vlan port %d 1,20" % vlan_id, "<0>%")
+
+ def delete_vlan(self, vlan_id=0):
+ if self.sec_port:
+ self.ctrl_crb.send_expect("del vlan port %d 5,22" % vlan_id, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("del vlan port %d 1,20" % vlan_id, "<0>%")
+ self.ctrl_crb.send_expect("del vlan %d" % vlan_id, "<0>%")
+
+ def add_txvlan(self, vlan_id=0):
+ if self.sec_port:
+ self.ctrl_crb.send_expect("set vlan tagging %d 5 tag" % vlan_id, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("set vlan tagging %d 1 tag" % vlan_id, "<0>%")
+
+ def delete_txvlan(self, vlan_id=0):
+ if self.sec_port:
+ self.ctrl_crb.send_expect("set vlan tagging %d 5 untag" % vlan_id, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("set vlan tagging %d 1 untag" % vlan_id, "<0>%")
+
+ def enable_jumbo(self, framesize=0):
+ if self.sec_port:
+ self.ctrl_crb.send_expect("set port config 5 max_frame_size %d" % framesize, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("set port config 1 max_frame_size %d" % framesize, "<0>%")
--
1.9.3
next prev parent reply other threads:[~2016-02-03 6:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 6:50 [dts] [PATCH 0/6] Support Boulder Rapid Yong Liu
2016-02-03 6:50 ` Yong Liu [this message]
2016-02-03 6:50 ` [dts] [PATCH 2/6] framework settings: support boulderrapid nic Yong Liu
2016-02-03 6:50 ` [dts] [PATCH 3/6] framework test_case: add kernel driver variable Yong Liu
2016-02-03 6:50 ` [dts] [PATCH 4/6] nics: add support for Boulder Rapid Yong Liu
2016-02-03 6:50 ` [dts] [PATCH 5/6] nics net_device: support Boulder Rapid network object Yong Liu
2016-02-03 6:50 ` [dts] [PATCH 6/6] tests: support Boulder Rapid Yong Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454482217-25147-2-git-send-email-yong.liu@intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).