From: haifeng <haifengx.tang@intel.com>
To: dts@dpdk.org
Subject: [dts] [DTS][PATCH] replace the default dpdk config file to common_base
Date: Mon, 7 Mar 2016 16:35:23 +0800 [thread overview]
Message-ID: <1457339723-55850-1-git-send-email-haifengx.tang@intel.com> (raw)
Signed-off-by: haifeng <haifengx.tang@intel.com>
---
framework/project_dpdk.py | 2 +-
tests/TestSuite_ieee1588.py | 10 ++--------
tests/TestSuite_ipv4_reassembly.py | 5 +----
tests/TestSuite_l3fwd.py | 4 ++--
tests/TestSuite_vhost_cuse_one_copy_one_vm.py | 4 ++--
tests/TestSuite_vhost_user_one_copy_one_vm.py | 2 +-
tests/TestSuite_virtio_iperf.py | 4 ++--
tests/TestSuite_vmdq.py | 2 +-
tests/TestSuite_vxlan_sample.py | 4 ++--
9 files changed, 14 insertions(+), 23 deletions(-)
diff --git a/framework/project_dpdk.py b/framework/project_dpdk.py
index a96aba8..1abcd42 100644
--- a/framework/project_dpdk.py
+++ b/framework/project_dpdk.py
@@ -74,7 +74,7 @@ class DPDKdut(Dut):
#Enable MLNX driver before installing dpdk
if dts.drivername == DRIVERS['ConnectX4']:
self.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_MLX5_PMD=n/"
- + "CONFIG_RTE_LIBRTE_MLX5_PMD=y/' config/common_linuxapp" , "# ", 30)
+ + "CONFIG_RTE_LIBRTE_MLX5_PMD=y/' config/common_base" , "# ", 30)
if not self.skip_setup:
self.build_install_dpdk(target)
diff --git a/tests/TestSuite_ieee1588.py b/tests/TestSuite_ieee1588.py
index 012d601..bfbb23b 100644
--- a/tests/TestSuite_ieee1588.py
+++ b/tests/TestSuite_ieee1588.py
@@ -51,10 +51,7 @@ class TestIeee1588(TestCase):
self.verify(len(dutPorts) > 0, "No ports found for " + self.nic)
# Change the config file to support IEEE1588 and recompile the package.
- if "bsdapp" in self.target:
- self.dut.send_expect("sed -i -e 's/IEEE1588=n$/IEEE1588=y/' config/common_bsdapp", "# ", 30)
- else:
- self.dut.send_expect("sed -i -e 's/IEEE1588=n$/IEEE1588=y/' config/common_linuxapp", "# ", 30)
+ self.dut.send_expect("sed -i -e 's/IEEE1588=n$/IEEE1588=y/' config/common_base", "# ", 30)
self.dut.skip_setup = False
self.dut.build_install_dpdk(self.target)
@@ -160,8 +157,5 @@ class TestIeee1588(TestCase):
self.dut.send_expect("quit", "# ", 30)
# Restore the config file and recompile the package.
- if "bsdapp" in self.target:
- self.dut.send_expect("sed -i -e 's/IEEE1588=y$/IEEE1588=n/' config/common_bsdapp", "# ", 30)
- else:
- self.dut.send_expect("sed -i -e 's/IEEE1588=y$/IEEE1588=n/' config/common_linuxapp", "# ", 30)
+ self.dut.send_expect("sed -i -e 's/IEEE1588=y$/IEEE1588=n/' config/common_base", "# ", 30)
self.dut.build_install_dpdk(self.target)
diff --git a/tests/TestSuite_ipv4_reassembly.py b/tests/TestSuite_ipv4_reassembly.py
index 3af4493..7935478 100644
--- a/tests/TestSuite_ipv4_reassembly.py
+++ b/tests/TestSuite_ipv4_reassembly.py
@@ -96,10 +96,7 @@ class TestIpReassembly(TestCase):
# r"examples/ip_reassembly/ipv4_rsmbl.h")
# self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=.*$/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=%s/' ./config/common_linuxapp" %int(num_of_fragments), "# ")
# self.dut.send_expect(sed_command % int(num_of_fragments), '#', 60)
- if 'bsdapp' in self.target:
- self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=.*$/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=%s/' ./config/common_bsdapp" % int(num_of_fragments), "# ")
- else:
- self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=.*$/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=%s/' ./config/common_linuxapp" % int(num_of_fragments), "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=.*$/CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=%s/' ./config/common_base" % int(num_of_fragments), "# ")
self.dut.send_expect("export RTE_TARGET=" + self.target, "#")
self.dut.send_expect("export RTE_SDK=`pwd`", "#")
self.dut.send_expect("rm -rf %s" % self.target, "# ", 5)
diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
index 31bb48c..e112b18 100644
--- a/tests/TestSuite_l3fwd.py
+++ b/tests/TestSuite_l3fwd.py
@@ -152,8 +152,8 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
pat = re.compile("P([0123])")
# Update config file and rebuild to get best perf on FVL
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_PCI_CONFIG=n/CONFIG_RTE_PCI_CONFIG=y/' ./config/common_linuxapp", "#", 20)
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_PCI_EXTENDED_TAG=.*$/CONFIG_RTE_PCI_EXTENDED_TAG=\"on\"/' ./config/common_linuxapp", "#", 20)
+ self.dut.send_expect("sed -i -e 's/CONFIG_RTE_PCI_CONFIG=n/CONFIG_RTE_PCI_CONFIG=y/' ./config/common_base", "#", 20)
+ self.dut.send_expect("sed -i -e 's/CONFIG_RTE_PCI_EXTENDED_TAG=.*$/CONFIG_RTE_PCI_EXTENDED_TAG=\"on\"/' ./config/common_base", "#", 20)
self.dut.build_install_dpdk(self.target)
diff --git a/tests/TestSuite_vhost_cuse_one_copy_one_vm.py b/tests/TestSuite_vhost_cuse_one_copy_one_vm.py
index 007ac37..e7d71e9 100644
--- a/tests/TestSuite_vhost_cuse_one_copy_one_vm.py
+++ b/tests/TestSuite_vhost_cuse_one_copy_one_vm.py
@@ -56,7 +56,7 @@ class TestVhostCuseOneCopyOneVm(TestCase, IxiaPacketGenerator):
# Change config file to enable vhost-cuse compiled.
self.dut.send_expect(
"sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE"
- "_VHOST_USER=n/' ./config/common_linuxapp",
+ "_VHOST_USER=n/' ./config/common_base",
"# ",
30)
self.dut.build_install_dpdk(self.target)
@@ -439,7 +439,7 @@ class TestVhostCuseOneCopyOneVm(TestCase, IxiaPacketGenerator):
# Restore the config file and recompile the package
self.dut.send_expect(
"sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE_VHOST_USER=y/' "
- "./config/common_linuxapp",
+ "./config/common_base",
"# ",
30)
self.dut.build_install_dpdk(self.target)
diff --git a/tests/TestSuite_vhost_user_one_copy_one_vm.py b/tests/TestSuite_vhost_user_one_copy_one_vm.py
index 7352a35..24d68b7 100644
--- a/tests/TestSuite_vhost_user_one_copy_one_vm.py
+++ b/tests/TestSuite_vhost_user_one_copy_one_vm.py
@@ -56,7 +56,7 @@ class TestVhostUserOneCopyOneVm(TestCase, IxiaPacketGenerator):
# Build target with modified config file
self.dut.send_expect(
"sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE"
- "_VHOST_USER=y/' ./config/common_linuxapp",
+ "_VHOST_USER=y/' ./config/common_base",
"# ",
30)
self.dut.build_install_dpdk(self.target)
diff --git a/tests/TestSuite_virtio_iperf.py b/tests/TestSuite_virtio_iperf.py
index d3c1e85..7f7e427 100644
--- a/tests/TestSuite_virtio_iperf.py
+++ b/tests/TestSuite_virtio_iperf.py
@@ -70,11 +70,11 @@ class TestVirtioIperf(TestCase):
if vhost == 'cuse':
self.dut_execut_cmd(
"sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE" +
- "_VHOST_USER=n/' ./config/common_linuxapp")
+ "_VHOST_USER=n/' ./config/common_base")
else:
self.dut_execut_cmd(
"sed -i -e 's/CONFIG_RTE_LIBRTE_VHOST_USER=.*$/CONFIG_RTE_LIBRTE" +
- "_VHOST_USER=y/' ./config/common_linuxapp")
+ "_VHOST_USER=y/' ./config/common_base")
self.dut.build_install_dpdk(self.target)
self.dut_execut_cmd("cd ./lib/librte_vhost")
out = self.dut_execut_cmd("make")
diff --git a/tests/TestSuite_vmdq.py b/tests/TestSuite_vmdq.py
index 429870a..8c5fa57 100644
--- a/tests/TestSuite_vmdq.py
+++ b/tests/TestSuite_vmdq.py
@@ -33,7 +33,7 @@ class TestVmdq(TestCase, IxiaPacketGenerator):
self.tester.extend_external_packet_generator(TestVmdq, self)
- self.dut.send_expect("sed -i 's/CONFIG_RTE_MAX_QUEUES_PER_PORT=256/CONFIG_RTE_MAX_QUEUES_PER_PORT=1024/' ./config/common_linuxapp", "# ", 5)
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_MAX_QUEUES_PER_PORT=256/CONFIG_RTE_MAX_QUEUES_PER_PORT=1024/' ./config/common_base", "# ", 5)
self.dut.build_install_dpdk(self.target)
# Update the max queue per port for Fortville.
diff --git a/tests/TestSuite_vxlan_sample.py b/tests/TestSuite_vxlan_sample.py
index db40a96..c7e0701 100644
--- a/tests/TestSuite_vxlan_sample.py
+++ b/tests/TestSuite_vxlan_sample.py
@@ -77,7 +77,7 @@ class TestVxlanSample(TestCase):
# Change the config file to support vhost and recompile the package.
self.dut.send_expect("sed -i -e 's/RTE_LIBRTE_VHOST=n$/"
+ "RTE_LIBRTE_VHOST=y/' config/"
- + "common_linuxapp", "# ", 30)
+ + "common_base", "# ", 30)
# temporary disable skip_setup
skip_setup = self.dut.skip_setup
self.dut.skip_setup = False
@@ -623,7 +623,7 @@ class TestVxlanSample(TestCase):
"""
# Restore the config file and recompile the package.
self.dut.send_expect("sed -i -e 's/RTE_LIBRTE_VHOST=y$/"
- + "RTE_LIBRTE_VHOST=n/' config/common_linuxapp",
+ + "RTE_LIBRTE_VHOST=n/' config/common_base",
"# ", 30)
# temporary disable skip_setup
skip_setup = self.dut.skip_setup
--
1.9.3
next reply other threads:[~2016-03-07 8:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-07 8:35 haifeng [this message]
2016-03-08 3:35 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457339723-55850-1-git-send-email-haifengx.tang@intel.com \
--to=haifengx.tang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).