From: Ding Heng <hengx.ding@intel.com>
To: dts@dpdk.org
Cc: Ding Heng <hengx.ding@intel.com>
Subject: [dts] [PATCH] l3fwd/testpmd performance: optimize command delete some useless configure.
Date: Mon, 25 Apr 2016 17:06:22 +0800 [thread overview]
Message-ID: <1461575182-25226-1-git-send-email-hengx.ding@intel.com> (raw)
l3fwd: comment 2 cases no need to run in nightly performance test. Fix issues
for run rfc2544 case with different nic. Add 72 byte for performance test.
testpmd: change report format for generate nightly performance test. Use core
mask instead of all cores for performance test. Optimize command for
performance test.
Signed-off-by: Ding Heng <hengx.ding@intel.com>
diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
index 0376a76..f6fce26 100644
--- a/tests/TestSuite_l3fwd.py
+++ b/tests/TestSuite_l3fwd.py
@@ -50,7 +50,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
test_cases_2_ports = [(1,"1S/1C/1T","%s -c %s -n %d -- -P -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0})'"),
#"1S/1C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1})'",
(1,"1S/2C/1T","%s -c %s -n %d -- -P -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0})'"),
- #"1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}),(P0,1,C{1.3.0}), (P1,1,C{1.4.0})'",
+ (1,"1S/4C/1T", "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}),(P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"),
#"2S/2C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{0.1.0}), (P1,0,C{0.2.0}),(P0,1,C{1.3.0}), (P1,1,C{1.4.0})'",
]
@@ -94,7 +94,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
"{IPv4(13,101,0,0), 24, P3}",
]
- frame_sizes = [64, 128, 256, 512, 2048] # 65, 128
+ frame_sizes = [64, 72, 128, 256, 512, 1024, 2048] # 65, 128
methods = ['lpm']#, 'exact']
#
@@ -309,7 +309,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
"""
pass
- def test_perf_l3fwd_4ports(self):
+ def no_test_perf_l3fwd_4ports(self):
"""
L3fwd main 4 ports.
"""
@@ -360,7 +360,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
dts.results_table_print()
- def test_perf_l3fwd_2ports(self):
+ def no_test_perf_l3fwd_2ports(self):
"""
L3fwd main 2 ports.
"""
@@ -395,6 +395,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
repl1 = "C{" + str(self.port_socket)
coreMask = {}
+ cmdlist = []
rtCmdLines = {}
cmdlist = TestL3fwd.test_cases_2_ports
for cmdline_pat in cmdlist:
@@ -471,12 +472,12 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
ports = self.dut.get_ports()
ports_num = len(ports)
- header_row = ["Frame", "mode", "S/C/T", "LR_tx_pkts(1min)", "LR_rx_pkts(1min)", "LR_loss_pkts(1min)", "% zero_loss_rate", "zero_loss_throughput(Mpps)"]
+ header_row = ["Frame_size(byte)", "mode", "S/C/T", "zero_loss_throughput(Mpps)", " % zero_loss_rate"]# "LR_tx_pkts(1min)", "LR_rx_pkts(1min)", "LR_loss_pkts(1min)", "% zero_loss_rate", "zero_loss_throughput(Mpps)"]
self.l3fwd_test_results['header'] = header_row
dts.results_table_add_header(header_row)
self.l3fwd_test_results['data'] = []
- for frame_size in [64, 128, 256, 512, 1024]:
+ for frame_size in TestL3fwd.frame_sizes:
# Prepare traffic flow
payload_size = frame_size - \
@@ -501,10 +502,17 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
coreMask = {}
rtCmdLines = {}
+ cmdlist = []
if ports_num == 4:
- cmdlist = TestL3fwd.test_cases_4_ports
+ for i in TestL3fwd.test_cases_4_ports:
+ cmdlist.append(i)
else:
- cmdlist = TestL3fwd.test_cases_2_ports
+ for i in TestL3fwd.test_cases_2_ports:
+ cmdlist.append(i)
+ if 'eagle' in self.nic:
+ del cmdlist[2]
+ else:
+ del cmdlist[1]
for cmdline_pat in cmdlist:
corelist = []
rtCmdLines[cmdline_pat[1]] = cmdline_pat[2]
@@ -561,14 +569,15 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
zero_loss_rate, tx_pkts, rx_pkts = self.tester.run_rfc2544(tgenInput, delay=60)
loss_pkts = tx_pkts - rx_pkts
self.dut.send_expect("^C", "#")
- linerate = self.wirespeed(self.nic, frame_size, 2)
+ linerate = self.wirespeed(self.nic, frame_size, ports_num)
zero_loss_throughput = (linerate * zero_loss_rate) / 100
tx_pkts = human_read_number(tx_pkts)
rx_pkts = human_read_number(rx_pkts)
loss_pkts = human_read_number(loss_pkts)
- data_row = [frame_size, mode, cores, tx_pkts, rx_pkts, loss_pkts, zero_loss_rate, zero_loss_throughput]
+ #data_row = [frame_size, mode, cores, tx_pkts, rx_pkts, loss_pkts, zero_loss_rate, zero_loss_throughput]
+ data_row = [frame_size, mode, cores, zero_loss_throughput, zero_loss_rate]
dts.results_table_add_row(data_row)
self.l3fwd_test_results['data'].append(data_row)
else:
diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py
index aeab99a..d078487 100644
--- a/tests/TestSuite_pmd.py
+++ b/tests/TestSuite_pmd.py
@@ -57,15 +57,12 @@ class TestPmd(TestCase,IxiaPacketGenerator):
self.rxfreet_values = [0, 8, 16, 32, 64, 128]
- self.test_cycles = [{'cores': '1S/1C/1T', 'Mpps': {}, 'pct': {}},
- {'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}},
- {'cores': '1S/2C/2T', 'Mpps': {}, 'pct': {}},
- {'cores': '1S/4C/1T', 'Mpps': {}, 'pct': {}},
- {'cores': '1S/8C/1T', 'Mpps': {}, 'pct': {}}
+ self.test_cycles = [{'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}}
]
self.table_header = ['Frame Size']
for test_cycle in self.test_cycles:
+ self.table_header.append("app")
self.table_header.append("%s Mpps" % test_cycle['cores'])
self.table_header.append("% linerate")
@@ -126,7 +123,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
core_mask = dts.create_mask(core_list)
port_mask = dts.create_mask(self.dut.get_ports())
- self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s --rss-ip" % (core_mask, queues, queues, port_mask))
+ self.pmdout.start_testpmd(core_config, " --rxq=%d --txq=%d --portmask=%s --rss-ip --txrst=32 --txfreet=32 --txd=128 --txqflags=0xf01" % (queues, queues, port_mask), socket=self.ports_socket)
command_line = self.pmdout.get_pmd_cmd()
info = "Executing PMD (mac fwd) using %s\n" % test_cycle['cores']
@@ -171,6 +168,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
table_row = [frame_size]
for test_cycle in self.test_cycles:
+ table_row.append("testpmd")
table_row.append(test_cycle['Mpps'][frame_size])
table_row.append(test_cycle['pct'][frame_size])
@@ -209,7 +207,8 @@ class TestPmd(TestCase,IxiaPacketGenerator):
core_mask = dts.create_mask(core_list)
port_mask = dts.create_mask([self.dut_ports[0], self.dut_ports[1]])
- self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
+ #self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
+ self.pmdout.start_testpmd(core_config, " --rxq=%d --txq=%d --portmask=%s --rss-ip --txrst=32 --txfreet=32 --txd=128" % (queues, queues, port_mask), socket=self.ports_socket)
command_line = self.pmdout.get_pmd_cmd()
info = "Executing PMD using %s\n" % test_cycle['cores']
@@ -249,6 +248,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
for frame_size in self.frame_sizes:
table_row = [frame_size]
for test_cycle in self.test_cycles:
+ table_row.append("testpmd")
table_row.append(test_cycle['Mpps'][frame_size])
table_row.append(test_cycle['pct'][frame_size])
--
1.9.3
next reply other threads:[~2016-04-25 9:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 9:06 Ding Heng [this message]
2016-04-29 18:01 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461575182-25226-1-git-send-email-hengx.ding@intel.com \
--to=hengx.ding@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).