From: Lijuan Tu <lijuanx.a.tu@intel.com>
To: yulong.pei@intel.com, dts@dpdk.org
Cc: Lijuan Tu <lijuanx.a.tu@intel.com>
Subject: [dts] [PATCH]tests: add VLAN ethertype script
Date: Mon, 13 Jun 2016 16:54:41 +0800 [thread overview]
Message-ID: <1465808081-14293-1-git-send-email-lijuanx.a.tu@intel.com> (raw)
Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
---
tests/TestSuite_vlan_ethertype_config.py | 293 +++++++++++++++++++++++++++++++
1 file changed, 293 insertions(+)
create mode 100644 tests/TestSuite_vlan_ethertype_config.py
diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py
new file mode 100644
index 0000000..99d7752
--- /dev/null
+++ b/tests/TestSuite_vlan_ethertype_config.py
@@ -0,0 +1,293 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+
+Test the support of VLAN Offload Features by Poll Mode Drivers.
+
+"""
+
+import dts
+import time
+
+
+from test_case import TestCase
+from pmd_output import PmdOutput
+from packet import Packet, sniff_packets, load_sniff_packets
+from scapy.utils import struct, socket, wrpcap, rdpcap
+#from scapy.all import *
+class TestVlan(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+
+
+ Vlan Prerequistites
+ """
+ global dutRxPortId
+ global dutTxPortId
+
+ # Based on h/w type, choose how many ports to use
+ ports = self.dut.get_ports()
+
+ # Verify that enough ports are available
+ self.verify(len(ports) >= 2, "Insufficient ports")
+
+ valports = [_ for _ in ports if self.tester.get_local_port(_) != -1]
+ dutRxPortId = valports[0]
+ dutTxPortId = valports[1]
+ port = self.tester.get_local_port(dutTxPortId)
+ self.rxItf = self.tester.get_interface(port)
+
+ self.portmask = dts.create_mask(valports[:2])
+
+
+ def start_tcpdump(self, rxItf):
+
+ self.tester.alt_session.send_expect("rm -rf /tmp/getPkgByTcpdump_%s.cap" % rxItf, "#")
+ self.tester.alt_session.send_expect("tcpdump -i %s -w /tmp/getPkgByTcpdump_%s.cap" % (rxItf, rxItf), "listening on")
+
+ def get_tcpdump_package(self, rxItf):
+ out = self.tester.alt_session.send_expect("^C", "#")
+ out = self.tester.send_expect("tcpdump -nn -e -v -r /tmp/getPkgByTcpdump_%s.cap 2> /dev/null" % rxItf, "#")
+ return out
+
+ def vlan_send_packet(self, vid, tpid="8100", num=1):
+ """
+ Send $num of packet to portid, if vid is -1, it means send pakcage not include vlan id.
+ """
+ # The package stream : testTxPort->dutRxPort->dutTxport->testRxPort
+ port = self.tester.get_local_port(dutRxPortId)
+ self.txItf = self.tester.get_interface(port)
+ self.smac = self.tester.get_mac(port)
+
+ port = self.tester.get_local_port(dutTxPortId)
+ self.rxItf = self.tester.get_interface(port)
+
+ # the package dect mac must is dut tx port id when the port promisc is off
+ self.dmac = self.dut.get_mac_address(dutRxPortId)
+
+ self.inst = sniff_packets(self.rxItf)
+ # FIXME send a burst with only num packet
+ if vid == -1:
+ pkt = Packet(pkt_type='UDP')
+ pkt.config_layer('ether', {'dst': self.dmac, 'src': self.smac})
+ else:
+ pkt = Packet(pkt_type='VLAN_UDP')
+ pkt.config_layer('ether', {'dst': self.dmac, 'src': self.smac})
+ pkt.config_layer('vlan', {'vlan': vid})
+ if tpid != "8100":
+ self.tpid_ori_file = "/tmp/tpid_ori.pcap"
+ self.tpid_new_file = "/tmp/tpid_new.pcap"
+ pkt.pktgen.write_pcap("%s" % self.tpid_ori_file)
+ fmt = '1/1 "%02x"'
+ out = self.tester.send_expect("hexdump -ve '%s' '%s' |sed 's/8100/%s/' |xxd -r -p > '%s'" % (fmt, self.tpid_ori_file, tpid, self.tpid_new_file),"# ")
+ pkt.pktgen.pkt = pkt.pktgen.read_pcap("%s" % self.tpid_new_file)
+
+ pkt.send_pkt(tx_port=self.txItf)
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.vlan = 51
+ self.tpid = "8100"
+ self.pmdout = PmdOutput(self.dut)
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % self.portmask)
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+
+ def test_vlan_change_tpid(self):
+ """
+ Test Case 1: change VLAN TPID
+ """
+ if self.kdriver == "fm10k":
+ print dts.RED("fm10k not support this case\n")
+ return
+ self.dut.send_expect("set fwd rxonly", "testpmd> ")
+ self.dut.send_expect("set verbose 1", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect("vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
+ self.tpid = "a100"
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.dut.get_session_output()
+ self.verify("PKT_RX_VLAN_PKT" in out, "Wrong vlan:" + str(out))
+
+ def test_vlan_filter_on_off(self):
+ """
+ Disable receipt of VLAN packets
+ """
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
+ # test vlan filter on
+ self.dut.send_expect("vlan set filter on %s" % dutRxPortId, "testpmd> ")
+
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify(self.tpid not in out, "Wrong vlan:" + str(out))
+
+ # test vlan filter off
+ self.dut.send_expect("vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify("%s" %self.tpid in out, "Wrong vlan:" + str(out))
+
+ def test_vlan_add_vlan_tag(self):
+ """
+ test adding VLAN Tag Identifier with changing VLAN TPID
+ """
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect("vlan set filter on %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("rx_vlan add %d %s" % (self.vlan, dutRxPortId), "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("start", "testpmd> ")
+
+ self.tpid = "8100"
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+
+ self.verify("%s" %self.vlan in out, "Vlan not found:" + str(out))
+ self.verify("%s" %self.tpid in out, "Wrong vlan:" + str(out))
+
+ self.tpid = "a100"
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify("%s" %self.tpid in out, "Wrong vlan:" + str(out))
+ self.verify("%x" %self.vlan in out, "Vlan not found:" + str(out))
+ self.dut.send_expect("rx_vlan rm %d %d" % (self.vlan, dutRxPortId), "testpmd> ", 30)
+ self.dut.send_expect("stop", "testpmd> ", 30)
+
+
+ def test_vlan_strip(self):
+ """
+ Test Case 4: test VLAN header striping with changing VLAN TPID
+ """
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect("vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("start", "testpmd> ", 20)
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify(self.tpid not in out, "Wrong vlan:" + str(out))
+
+ self.tpid = "a100"
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify(self.tpid not in out, "Wrong vlan:" + str(out))
+
+ self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(self.vlan, self.tpid)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify("%x" %self.vlan in out, "Vlan not found:" + str(out))
+
+ def test_vlan_enable_vlan_insertion(self):
+ """
+ test VLAN header inserting with changing VLAN TPID
+ """
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect("vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect("tx_vlan set %s %d" % (dutTxPortId, self.vlan), "testpmd> ")
+
+ self.tpid = "8100"
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(-1)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify(self.tpid in out, "Wrong vlan:" + str(out))
+ self.verify("%s" % self.vlan in out, "Vlan not found:" + str(out))
+
+ self.tpid = "a100"
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(-1)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify(self.tpid in out, "Wrong vlan:" + str(out))
+ self.verify("%x" % self.vlan in out, "Vlan not found:" + str(out))
+
+ self.dut.send_expect("tx_vlan reset %s" % dutTxPortId, "testpmd> ", 30)
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(-1)
+ out = self.get_tcpdump_package(self.rxItf)
+ self.verify(self.tpid not in out, "Wrong vlan:" + str(out))
+
+ if self.kdriver == "fm10k":
+ netobj = self.dut.ports_info[dutTxPortId]['port']
+ # not delete vlan for self.vlan will used later
+ netobj.delete_txvlan(vlan_id = self.vlan)
+
+ def _test_vlan_qinq_tpid(self):
+ """
+ Test Case 6: Change S-Tag and C-Tag within QinQ
+ """
+ self.dut.send_expect("vlan set qinq on %d" %dutTxPortId, "testpmd> ", 20)
+ self.dut.send_expect("set verbose 1", "testpmd> ")
+ self.dut.send_expect("set fwd rxonly", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect("rx_vlan add %d %s" % (self.vlan, dutRxPortId), "testpmd> ")
+ self.dut.send_expect("vlan set outer tpid 0x%s %s" % (self.tpid, dutRxPortId), "testpmd> ")
+ self.dut.send_expect("vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
+
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("stop", "testpmd> ", 30)
+ self.dut.send_expect("quit", "# ", 30)
+ pass
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ if self.kdriver == "fm10k":
+ netobj = self.dut.ports_info[dutRxPortId]['port']
+ netobj.delete_txvlan(vlan_id = self.vlan)
+ netobj.delete_vlan(vlan_id = self.vlan)
--
1.9.3
next reply other threads:[~2016-06-13 8:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 8:54 Lijuan Tu [this message]
2016-06-14 1:23 ` Liu, Yong
2016-06-14 2:41 ` Tu, LijuanX A
2016-06-22 9:40 ` Pei, Yulong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465808081-14293-1-git-send-email-lijuanx.a.tu@intel.com \
--to=lijuanx.a.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yulong.pei@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).