From: Lijuan Tu <lijuanx.a.tu@intel.com>
To: dts@dpdk.org
Cc: Lijuan Tu <lijuanx.a.tu@intel.com>
Subject: [dts] [PATCH]tests vf_vlan: enable crc-strip of FLV when start testpmd in vm
Date: Fri, 24 Jun 2016 14:54:41 +0800 [thread overview]
Message-ID: <1466751281-27159-1-git-send-email-lijuanx.a.tu@intel.com> (raw)
For NIC fortville, dpdk16.07 will quit testpmd if VF can't disable HW CRC Strip
Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
---
tests/TestSuite_vf_vlan.py | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
index e32e5bd..1034602 100644
--- a/tests/TestSuite_vf_vlan.py
+++ b/tests/TestSuite_vf_vlan.py
@@ -152,7 +152,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd mac')
self.vm0_testpmd.execute_cmd('start')
@@ -176,7 +179,7 @@ class TestVfVlan(TestCase):
pkt.config_layer('ether', {'dst': self.vf0_mac})
elif pkt_type == "VLAN_UDP":
pkt = Packet(pkt_type='VLAN_UDP')
- pkt.config_layer('dot1q', {'vlan': vlan})
+ pkt.config_layer('vlan', {'vlan': vlan})
pkt.config_layer('ether', {'dst': self.vf0_mac})
pkt.send_pkt(tx_port=self.tester_intf0)
@@ -197,7 +200,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd rxonly')
self.vm0_testpmd.execute_cmd('set verbose 1')
self.vm0_testpmd.execute_cmd('start')
@@ -249,7 +255,7 @@ class TestVfVlan(TestCase):
pkts = load_sniff_packets(inst)
vlans = []
for pkt in pkts:
- vlan = pkt.strip_element_dot1q("vlan")
+ vlan = pkt.strip_element_vlan("vlan")
vlans.append(vlan)
self.verify(
@@ -262,7 +268,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set verbose 1')
for tx_vlan in tx_vlans:
@@ -283,10 +292,14 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd rxonly')
self.vm0_testpmd.execute_cmd('set verbose 1')
self.vm0_testpmd.execute_cmd('vlan set strip on 0')
+ self.vm0_testpmd.execute_cmd('vlan set filter on 0')
self.vm0_testpmd.execute_cmd('start')
# send packet without vlan
@@ -334,7 +347,7 @@ class TestVfVlan(TestCase):
# send packet with vlan
out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP")
self.verify(
- "received 1 packets" in out, "Not received vlan packet without vlan filter!!!")
+ "received 1 packets" not in out, "Not received vlan packet without vlan filter!!!")
self.vm0_testpmd.quit()
@@ -345,7 +358,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd rxonly')
self.vm0_testpmd.execute_cmd('set verbose 1')
self.vm0_testpmd.execute_cmd('start')
--
1.9.3
next reply other threads:[~2016-06-24 6:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-24 6:54 Lijuan Tu [this message]
2016-06-29 0:44 ` Liu, Yong
2016-06-29 9:11 ` Tu, LijuanX A
2016-06-29 9:22 ` Liu, Yong
2016-06-29 8:50 Lijuan Tu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466751281-27159-1-git-send-email-lijuanx.a.tu@intel.com \
--to=lijuanx.a.tu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).