From: Lijuan Tu <lijuanx.a.tu@intel.com>
To: dts@dpdk.org
Cc: Lijuan Tu <lijuanx.a.tu@intel.com>
Subject: [dts] [PATCH V1]tests vf_vlan: enable crc-strip of FLV when start testpmd in vm
Date: Fri, 1 Jul 2016 10:18:05 +0800 [thread overview]
Message-ID: <1467339485-31464-1-git-send-email-lijuanx.a.tu@intel.com> (raw)
1, For NIC fortville, dpdk16.07 will quit testpmd if VF can't disable HW CRC Strip
2, rename dot1q to vlan
3, fix logical error on vlan rx
Enable vlan filter on port A
"vlan set filter vlan 0"
Add vlan x on port A
"rx_vlan add 1 0"
Send packets with vlan x ,and check packet can received
Remove vlan x on port A
"rx_vlan rm 1 0"
Send packets with vlan x ,and check packet can't received
more detail infomation see test plan.
Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
---
tests/TestSuite_vf_vlan.py | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
index e32e5bd..1034602 100644
--- a/tests/TestSuite_vf_vlan.py
+++ b/tests/TestSuite_vf_vlan.py
@@ -152,7 +152,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd mac')
self.vm0_testpmd.execute_cmd('start')
@@ -176,7 +179,7 @@ class TestVfVlan(TestCase):
pkt.config_layer('ether', {'dst': self.vf0_mac})
elif pkt_type == "VLAN_UDP":
pkt = Packet(pkt_type='VLAN_UDP')
- pkt.config_layer('dot1q', {'vlan': vlan})
+ pkt.config_layer('vlan', {'vlan': vlan})
pkt.config_layer('ether', {'dst': self.vf0_mac})
pkt.send_pkt(tx_port=self.tester_intf0)
@@ -197,7 +200,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd rxonly')
self.vm0_testpmd.execute_cmd('set verbose 1')
self.vm0_testpmd.execute_cmd('start')
@@ -249,7 +255,7 @@ class TestVfVlan(TestCase):
pkts = load_sniff_packets(inst)
vlans = []
for pkt in pkts:
- vlan = pkt.strip_element_dot1q("vlan")
+ vlan = pkt.strip_element_vlan("vlan")
vlans.append(vlan)
self.verify(
@@ -262,7 +268,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set verbose 1')
for tx_vlan in tx_vlans:
@@ -283,10 +292,14 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd rxonly')
self.vm0_testpmd.execute_cmd('set verbose 1')
self.vm0_testpmd.execute_cmd('vlan set strip on 0')
+ self.vm0_testpmd.execute_cmd('vlan set filter on 0')
self.vm0_testpmd.execute_cmd('start')
# send packet without vlan
@@ -334,7 +347,7 @@ class TestVfVlan(TestCase):
# send packet with vlan
out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP")
self.verify(
- "received 1 packets" in out, "Not received vlan packet without vlan filter!!!")
+ "received 1 packets" not in out, "Not received vlan packet without vlan filter!!!")
self.vm0_testpmd.quit()
@@ -345,7 +358,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ if self.kdriver == "i40e":
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
+ else:
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
self.vm0_testpmd.execute_cmd('set fwd rxonly')
self.vm0_testpmd.execute_cmd('set verbose 1')
self.vm0_testpmd.execute_cmd('start')
--
1.9.3
reply other threads:[~2016-07-01 2:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467339485-31464-1-git-send-email-lijuanx.a.tu@intel.com \
--to=lijuanx.a.tu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).