From: Lijuan Tu <lijuanx.a.tu@intel.com>
To: dts@dpdk.org
Cc: Lijuan Tu <lijuanx.a.tu@intel.com>
Subject: [dts] [PATCH V2 1/2] add unit_tests_distributor_test_plan
Date: Thu, 4 Aug 2016 16:09:25 +0800 [thread overview]
Message-ID: <1470298165-13374-1-git-send-email-lijuanx.a.tu@intel.com> (raw)
In-Reply-To: <1470297873-13332-1-git-send-email-lijuanx.a.tu@intel.com>
Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
---
test_plans/unit_tests_distributor_test_plan.rst | 104 ++++++++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 test_plans/unit_tests_distributor_test_plan.rst
diff --git a/test_plans/unit_tests_distributor_test_plan.rst b/test_plans/unit_tests_distributor_test_plan.rst
new file mode 100644
index 0000000..c25533d
--- /dev/null
+++ b/test_plans/unit_tests_distributor_test_plan.rst
@@ -0,0 +1,104 @@
+.. Copyright (c) <2014>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Prerequisites
+=============
+One 10Gb Ethernet port of the DUT is directly connected and link is up.
+
+===================
+Packet Distributor
+===================
+The DPDK Packet Distributor library is a library designed to be used for
+dynamic load balancing of traffic while supporting single packet at a
+time operation. When using this library, the logical cores in use are to
+be considered in two roles: firstly a distributor lcore, which is
+responsible for load balancing or distributing packets, and a set of
+worker lcores which are responsible for receiving the packets from the
+distributor and operating on them.
+
+This is the test plan for Packet Distributor unit test.
+
+This section explains how to run the unit tests for distributor.
+The test can be launched independently using the command line interface.
+This test is implemented as a linuxapp environment application.
+
+The complete test suite is launched automatically using a python-expect
+script (launched using ``make test``) that sends commands to
+the application and checks the results. A test report is displayed on
+stdout.
+
+The final output of the test will be average cycles of IO used per packet.
+
+The steps to run the unit test manually are as follow::
+
+ # make -C ./app/test/
+ # ./app/test/test -n 1 -c ffff
+ RTE>> distributor_autotest
+
+suppose we test 1 distributor core and n worker cores::
+
+number of cores will be n+1
+
+===============================================
+Test Case: 1 distributor core and 1 worker core
+===============================================
+number of cores is 2::
+
+ ./app/test/test -n 1 -c 0xC
+
+================================================
+Test Case: 1 distributor core and 4 worker cores
+================================================
+number of cores is 5::
+
+ ./app/test/test -n 1 -c 0x3e
+
+================================================
+Test Case: 1 distributor core and 8 worker cores
+================================================
+number of cores is 9::
+
+ ./app/test/test -n 1 -c 0x3fe
+
+================================================
+Test Case: 1 distributor core and 5 worker cores
+================================================
+number of cores is 6::
+
+ ./app/test/test -n 1 -c 0x7e
+================================================
+Test Case: 1 distributor core and 10 worker core
+================================================
+number of cores is 11::
+
+ ./app/test/test -n 1 -c 0xffe
+
--
1.9.3
next prev parent reply other threads:[~2016-08-04 8:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-04 8:04 [dts] [PATCH V2 0/2] Add packet distributor unit test plan and test script Lijuan Tu
2016-08-04 8:09 ` Lijuan Tu [this message]
2016-08-04 8:53 ` [dts] [PATCH V2 1/2] add unit_tests_distributor_test_plan Liu, Yong
2016-08-04 8:10 ` [dts] [PATCH V2 2/2] add unit_tests_distributor test script Lijuan Tu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470298165-13374-1-git-send-email-lijuanx.a.tu@intel.com \
--to=lijuanx.a.tu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).