From: "xu,gang" <gangx.xu@intel.com>
To: dts@dpdk.org
Cc: "xu,gang" <gangx.xu@intel.com>
Subject: [dts] [PATCH V1 4/6] add l2fwd-jobstats_test_plan code
Date: Mon, 15 Aug 2016 12:46:53 +0800 [thread overview]
Message-ID: <1471236415-13011-4-git-send-email-gangx.xu@intel.com> (raw)
In-Reply-To: <1471236415-13011-1-git-send-email-gangx.xu@intel.com>
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
test_plans/l2fwd-jobstats_test_plan.rst | 84 +++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 test_plans/l2fwd-jobstats_test_plan.rst
diff --git a/test_plans/l2fwd-jobstats_test_plan.rst b/test_plans/l2fwd-jobstats_test_plan.rst
new file mode 100644
index 0000000..97f6990
--- /dev/null
+++ b/test_plans/l2fwd-jobstats_test_plan.rst
@@ -0,0 +1,84 @@
+.. BSD LICENSE
+ Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+L2 Forwarding Sample Application (in Real and Virtualized Environments) with core load statistics.
+==================================================================================================
+
+The L2 Forwarding sample application is a simple example of packet processing using
+the Data Plane Development Kit (DPDK) which
+also takes advantage of Single Root I/O Virtualization (SR-IOV) features in a virtualized environment.
+
+.. note::
+
+ This application is a variation of L2 Forwarding sample application. It demonstrate possible
+ scheme of job stats library usage therefore some parts of this document is identical with original
+ L2 forwarding application.
+
+Overview
+--------
+
+The L2 Forwarding sample application, which can operate in real and virtualized environments,
+performs L2 forwarding for each packet that is received.
+The destination port is the adjacent port from the enabled portmask, that is,
+if the first four ports are enabled (portmask 0xf),
+ports 1 and 2 forward into each other, and ports 3 and 4 forward into each other.
+Also, the MAC addresses are affected as follows:
+
+* The source MAC address is replaced by the TX port MAC address
+
+* The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID
+
+Running the Application
+-----------------------
+
+The application requires a number of command line options:
+
+.. code-block:: console
+
+ ./build/l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l]
+
+where,
+
+* p PORTMASK: A hexadecimal bitmask of the ports to configure
+
+* q NQ: A number of queues (=ports) per lcore (default is 1)
+
+* l: Use locale thousands separator when formatting big numbers.
+
+To run the application in linuxapp environment with 4 lcores, 16 ports, 8 RX queues per lcore and
+thousands separator printing, issue the command:
+
+.. code-block:: console
+
+ $ ./build/l2fwd-jobstats -c f -n 4 -- -q 8 -p ffff -l
+
+Refer to the *DPDK Getting Started Guide* for general information on running applications
+and the Environment Abstraction Layer (EAL) options.
+
--
1.9.3
next prev parent reply other threads:[~2016-08-15 4:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-15 4:46 [dts] [PATCH V1 1/6] add hotplug test code xu,gang
2016-08-15 4:46 ` [dts] [PATCH V1 2/6] add hotplug_test_plan code xu,gang
2016-08-15 4:46 ` [dts] [PATCH V1 3/6] add l2fwd-jobstats test code xu,gang
2016-08-15 4:46 ` xu,gang [this message]
2016-08-15 4:46 ` [dts] [PATCH V1 5/6] add xstats " xu,gang
2016-09-06 6:28 ` Liu, Yong
2016-08-15 4:46 ` [dts] [PATCH V1 6/6] add xstats_test_plan code xu,gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471236415-13011-4-git-send-email-gangx.xu@intel.com \
--to=gangx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).