From: "xu,gang" <gangx.xu@intel.com>
To: dts@dpdk.org
Cc: "xu,gang" <gangx.xu@intel.com>
Subject: [dts] [PATCH V2 03/10] add ip_pipeline cpu utilization test code
Date: Thu, 25 Aug 2016 16:24:16 +0800 [thread overview]
Message-ID: <1472113463-4298-3-git-send-email-gangx.xu@intel.com> (raw)
In-Reply-To: <1472113463-4298-1-git-send-email-gangx.xu@intel.com>
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
tests/TestSuite_ip_pipeline_cpu_utilization.py | 106 +++++++++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 tests/TestSuite_ip_pipeline_cpu_utilization.py
diff --git a/tests/TestSuite_ip_pipeline_cpu_utilization.py b/tests/TestSuite_ip_pipeline_cpu_utilization.py
new file mode 100644
index 0000000..f267901
--- /dev/null
+++ b/tests/TestSuite_ip_pipeline_cpu_utilization.py
@@ -0,0 +1,106 @@
+#BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test CPU utilization
+"""
+
+import dts
+import string
+import time
+import re
+import thread
+from test_case import TestCase
+from plotting import Plotting
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from packet import Packet, sniff_packets, load_sniff_packets
+
+class Test_Ip_pipeline_CPU_utilization(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ cores = self.dut.get_core_list("1S/4C/1T")
+ self.coremask = dts.create_mask(cores)
+
+ self.path = "./build/ip_pipeline"
+
+ # build sample app
+ out = self.dut.build_dpdk_apps("./examples/ip_pipeline")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def scapy_send_package(self,a):
+ """
+ Send a packet to port
+ """
+ txport = self.tester.get_local_port(self.dut_ports[0])
+ mac = self.dut.get_mac_address(self.dut_ports[0])
+ txItf = self.tester.get_interface(txport)
+ self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)], iface="%s",count=%s)' % (mac, txItf,a))
+ self.tester.scapy_execute()
+
+ def test_Ip_pipeline_CPU_utilization(self):
+
+ cmd = self.path + " -p 0xf -f ./config/edge_router_downstream.cfg -s ./config/edge_router_downstream.sh"
+ self.dut.send_expect("cd examples/ip_pipeline/","# ",50)
+ self.dut.send_expect(cmd,"#p 1 route ls",50)
+ self.scapy_send_package(1000)
+ self.dut.send_expect("","pipeline> ",5)
+ out = self.dut.send_expect("t 1 headroom","pipeline> ",10)
+ self.dut.send_expect("quit","# ",10)
+ self.verify(out > "0" , "headroom error")
+
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
1.9.3
next prev parent reply other threads:[~2016-08-25 8:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-25 8:24 [dts] [PATCH V2 01/10] add ip_pipeline cfg " xu,gang
2016-08-25 8:24 ` [dts] [PATCH V2 02/10] add ip_pipeline cfg test plan xu,gang
2016-08-26 1:28 ` Liu, Yong
2016-08-25 8:24 ` xu,gang [this message]
2016-08-25 8:24 ` [dts] [PATCH V2 04/10] add ip_pipeline cpu utilization " xu,gang
2016-08-25 8:24 ` [dts] [PATCH V2 05/10] add ip_pipeline link_identification test code xu,gang
2016-08-25 8:24 ` [dts] [PATCH V2 06/10] add ip_pipeline link_identification test plan xu,gang
2016-08-26 2:19 ` Liu, Yong
2016-08-25 8:24 ` [dts] [dst][PATCH V2 07/10] add ip_pipeline parser_cleanup test code xu,gang
2016-08-25 8:24 ` [dts] [PATCH V2 08/10] add ip_pipeline parser_cleanup test plan xu,gang
2016-08-25 8:24 ` [dts] [PATCH V2 09/10] add ip_pipeline source_sink test code xu,gang
2016-08-25 8:24 ` [dts] [PATCH V2 10/10] add ip_pipeline source_sink test plan xu,gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472113463-4298-3-git-send-email-gangx.xu@intel.com \
--to=gangx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).