From: "xu,gang" <gangx.xu@intel.com>
To: dts@dpdk.org
Cc: "xu,gang" <gangx.xu@intel.com>
Subject: [dts] [PATCH V2] add test suite hotplug
Date: Tue, 22 Nov 2016 14:39:14 +0800 [thread overview]
Message-ID: <1479796757-9703-1-git-send-email-gangx.xu@intel.com> (raw)
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
tests/TestSuite_hotplug.py | 153 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 153 insertions(+)
create mode 100644 tests/TestSuite_hotplug.py
diff --git a/tests/TestSuite_hotplug.py b/tests/TestSuite_hotplug.py
new file mode 100644
index 0000000..0945dfd
--- /dev/null
+++ b/tests/TestSuite_hotplug.py
@@ -0,0 +1,153 @@
+#BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test port hot plug.
+"""
+
+import string
+import time
+import re
+import utils
+from test_case import TestCase
+from plotting import Plotting
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from packet import Packet, sniff_packets, load_sniff_packets
+
+class TestPortHotPlug(TestCase):
+ """
+ This feature only supports igb_uio now and not support freebsd
+ """
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ cores = self.dut.get_core_list("1S/4C/1T")
+ self.coremask = utils.create_mask(cores)
+ self.port = len(self.dut_ports) - 1
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.dut.send_expect("./tools/dpdk-devbind.py -u %s" % self.dut.ports_info[self.port]['pci'],"#",60)
+
+ def attach(self, port):
+ """
+ attach port
+ """
+ self.dut.send_expect("port attach %s" % self.dut.ports_info[port]['pci'],"is attached",60)
+ self.dut.send_expect("port start %s" % port,"Link Up",60)
+ self.dut.send_expect("show port info %s" % port,"testpmd>",60)
+
+ def detach(self, port):
+ """
+ detach port
+ """
+ self.dut.send_expect("port stop %s" % port,"Link Down",60)
+ self.dut.send_expect("port close %s" % port,"Closing ports...",60)
+ self.dut.send_expect("port detach %s" % port,"is detached",60)
+
+ def test_after_attach(self):
+ """
+ first run testpmd after attach port
+ """
+ cmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c %s -n %s -- -i" % (self.coremask,self.dut.get_memory_channels())
+ self.dut.send_expect(cmd,"testpmd>",60)
+ session_secondary = self.dut.new_session()
+ session_secondary.send_expect("./tools/dpdk-devbind.py --bind=igb_uio %s" % self.dut.ports_info[self.port]['pci'], "#", 60)
+ self.attach(self.port)
+ self.dut.send_expect("start","testpmd>",60)
+ self.dut.send_expect("port detach %s" % self.port,"Please close port first",60)
+ self.dut.send_expect("stop","testpmd>",60)
+ self.detach(self.port)
+ self.attach(self.port)
+
+ self.dut.send_expect("start","testpmd>",60)
+ self.dut.send_expect("port detach %s" % self.port,"Please close port first",60)
+ self.send_packe(self.port)
+ out = self.dut.send_expect("show port stats %s" % self.port ,"testpmd>",60)
+ packet = re.search("RX-packets:\s*(\d*)",out)
+ sum_packet = packet.group(1)
+ self.verify(sum_packet = 1, "Insufficient the received package")
+ self.dut.send_expect("quit","#",60)
+
+ def send_packe(self, port):
+ """
+ Send a packet to port
+ """
+ self.dmac = self.dut.get_mac_address(self.dut_ports[0])
+ txport = self.tester.get_local_port(self.dut_ports[0])
+ self.txItf = self.tester.get_interface(txport)
+ pkt = Packet(pkt_type='UDP')
+ pkt.config_layer('ether', {'dst': self.dmac,})
+ pkt.send_pkt(tx_port=self.txItf)
+
+ def test_before_attach(self):
+ """
+ first attach port after run testpmd
+ """
+ session_secondary = self.dut.new_session()
+ session_secondary.send_expect("./tools/dpdk-devbind.py --bind=igb_uio %s" % self.dut.ports_info[self.port]['pci'], "#", 60)
+
+ cmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c %s -n %s -- -i" % (self.coremask,self.dut.get_memory_channels())
+ self.dut.send_expect(cmd,"testpmd>",60)
+ self.detach(self.port)
+ self.attach(self.port)
+ self.dut.send_expect("start","testpmd>",60)
+ self.dut.send_expect("port detach %s" % self.port, "Please close port first",60)
+ self.send_packe(self.port)
+ out = self.dut.send_expect("show port stats %s" % self.port ,"testpmd>",60)
+ packet = re.search("RX-packets:\s*(\d*)",out)
+ sum_packet = packet.group(1)
+ self.verify(sum_packet = 1, "Insufficient the received package")
+ self.dut.send_expect("quit","#",60)
+
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("./tools/dpdk-devbind.py --bind=igb_uio %s" % self.dut.ports_info[self.port]['pci'],"#",60)
+ self.dut.kill_all()
+ time.sleep(2)
+
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
+
--
1.9.3
next reply other threads:[~2016-11-22 6:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 6:39 xu,gang [this message]
2016-11-22 6:39 ` [dts] [PATCH V2] add Test Suite ip_pipeline_config_file xu,gang
2016-11-22 6:39 ` [dts] [PATCH V2] add Test Suite l2fwd-jobstats xu,gang
2016-11-22 6:39 ` [dts] [PATCH V2] add test suite packet ordering xu,gang
2016-11-23 5:05 ` [dts] [PATCH V2] add test suite hotplug Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479796757-9703-1-git-send-email-gangx.xu@intel.com \
--to=gangx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).