From: "lei,yao" <lei.a.yao@intel.com>
To: dts@dpdk.org
Cc: lei yao <lei.a.yao@intel.com>
Subject: [dts] [PATCH V2] test_plans: add test plan for vhost pvp performance test case based on qemu
Date: Tue, 20 Dec 2016 13:41:58 +0800 [thread overview]
Message-ID: <1482212518-7607-1-git-send-email-lei.a.yao@intel.com> (raw)
From: lei yao <lei.a.yao@intel.com>
Signed-off-by: lei yao <lei.a.yao@intel.com>
---
.../vhost_qemu_pvp_performance_test_plan.rst | 174 +++++++++++++++++++++
1 file changed, 174 insertions(+)
create mode 100644 test_plans/vhost_qemu_pvp_performance_test_plan.rst
diff --git a/test_plans/vhost_qemu_pvp_performance_test_plan.rst b/test_plans/vhost_qemu_pvp_performance_test_plan.rst
new file mode 100644
index 0000000..d68aa64
--- /dev/null
+++ b/test_plans/vhost_qemu_pvp_performance_test_plan.rst
@@ -0,0 +1,174 @@
+.. Copyright (c) <2016>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===========================================
+DPDK Vhost Qemu pvp performance test plan
+===========================================
+
+This test plan will cover the PVP performance test cases based on qemu settings
+
+Test Case 1: DPDK PVP performance on mergeable path
+===================================================
+
+Flow:
+TG(Traffic generator) --> NIC --> Vhost --> Virtio--> Vhost--> NIC--> TG
+
+On host:
+
+1. First build the vhost-switch sample.
+
+2. Start up vhost-switch, mergeable 1 means the jubmo frame feature is
+enabled. vm2vm 0 means only one vm without vm2vm communication. Use 3core
+to launch the sample will get the best performance, 2 core will be used for
+data path, one core is master core for some configuration.::
+
+ taskset -c 18-20 ./vhost-switch -c 0x1c0000 -n 4 \
+ --huge-dir /mnt/huge --socket-mem 1024,1024 \
+ -- -p 0x1 --mergeable 1 --vm2vm 0 --socket-file ./vhost-net
+
+
+3. Start VM with vhost-user as backend, add 1 virtio devices::
+
+ taskset -c 22-26 \
+ qemu-system-x86_64 -name vm1 -cpu host -enable-kvm -m 2048 \
+ -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc \
+ -smp cores=5,sockets=1 -drive file=/home/osimg/f23_liu.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1 \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on \
+ -netdev tap,id=ipvm1,ifname=tap4,script=/etc/qemu-ifup \
+ -device rtl8139,netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -vnc :10 -daemonize
+
+
+4. On VM1, ensure the same dpdk folder is copied and run testpmd, virtio
+device is binded to igb_uio, use ::
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i
+ testpmd>set fwd mac
+ testpmd>start tx_first
+
+5. Send traffic from Traffic generator to virtio device.
+Set DEST MAC as virtio1's MAC(52:54:00:00:00:01),
+set VLAN ID(Get from vhost-sample output, default is 1000) as virtio1's VLAN.
+Measure the Performance.
+
+
+Test Case 2: DPDK PVP performance on Normal path
+================================================
+
+Flow:
+TG(Traffic generator) --> NIC --> Vhost --> Virtio--> Vhost--> NIC--> TG
+
+On host:
+
+1. First build the vhost-switch sample.
+
+2. Start up vhost-switch, mergeable 0 means the jubmo frame feature is
+disabled. vm2vm 0 means only one vm without vm2vm communication. Use 3core to
+launch the sample will get the best performance, 2 core will be used for data
+path, one core is master core for some configuration.::
+
+ taskset -c 18-20 ./vhost-switch -c 0x1c0000 -n 4\
+ --huge-dir /mnt/huge --socket-mem 1024,1024 \
+ -- -p 0x1 --mergeable 0 --vm2vm 0 --socket-file ./vhost-net
+
+
+3. Start VM with vhost-user as backend, add 1 virtio devices::
+
+ taskset -c 22-26 \
+ qemu-system-x86_64 -name vm1 -cpu host -enable-kvm -m 2048 \
+ -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc \
+ -smp cores=5,sockets=1 -drive file=/home/osimg/f23_liu.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1 \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,mq=on \
+ -netdev tap,id=ipvm1,ifname=tap4,script=/etc/qemu-ifup \
+ -device rtl8139,netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -vnc :10 -daemonize
+
+
+4. On VM1, ensure the same dpdk folder is copied and run testpmd, virtio
+device is binded to igb_uio, use txqflags=0xf00 :
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i --txqflags=0xf00
+ testpmd>set fwd mac
+ testpmd>start tx_first
+
+5. Send traffic from Traffic generator to virtio device.
+Set DEST MAC as virtio1's MAC(52:54:00:00:00:01),
+set VLAN ID(Get from vhost-sample output, default is 1000) as virtio1's VLAN.
+Measure the Performance.
+
+Test Case 3: DPDK PVP performance on Vector path
+================================================
+
+Flow:
+TG(Traffic generator) --> NIC --> Vhost --> Virtio--> Vhost--> NIC--> TG
+
+On host:
+
+1. First build the vhost-switch sample.
+
+2. Start up vhost-switch, mergeable 0 means the jubmo frame feature is
+disabled. vm2vm 0 means only one vm without vm2vm communication. Use 3core to
+launch the sample will get the best performance, 2 core will be used for data
+path, one core is master core for some configuration.::
+
+ taskset -c 18-20 ./vhost-switch -c 0x1c0000 -n 4 \
+ --huge-dir /mnt/huge --socket-mem 1024,1024 \
+ -- -p 0x1 --mergeable 0 --vm2vm 0 --socket-file ./vhost-net
+
+
+3. Start VM with vhost-user as backend, add 1 virtio devices::
+
+ taskset -c 22-26 \
+ qemu-system-x86_64 -name vm1 -cpu host -enable-kvm -m 2048 \
+ -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc \
+ -smp cores=5,sockets=1 -drive file=/home/osimg/f23_liu.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1 \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,mq=on \
+ -netdev tap,id=ipvm1,ifname=tap4,script=/etc/qemu-ifup \
+ -device rtl8139,netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -vnc :10 -daemonize
+
+
+4. On VM1, ensure the same dpdk folder is copied and run testpmd, virtio
+device is binded to igb_uio, use txqflags=0xf01 :
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i --txqflags=0xf01
+ testpmd>set fwd mac
+ testpmd>start tx_first
+
+5. Send traffic from Traffic generator to virtio device.
+Set DEST MAC as virtio1's MAC(52:54:00:00:00:01),
+set VLAN ID(Get from vhost-sample output, default is 1000) as virtio1's VLAN.
+Measure the Performance.
+
--
2.7.4
reply other threads:[~2016-12-20 5:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482212518-7607-1-git-send-email-lei.a.yao@intel.com \
--to=lei.a.yao@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).